Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “basins”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS2021

The impact of Los Angeles Basin pollution and stratospheric intrusions on the surrounding San Gabriel Mountains as seen by surface measurements, lidar, and numerical models

In this work, the impact of Los Angeles Basin pollution transport and stratospheric intrusions on the surface ozone levels observed in the San Gabriel Mountains is investigated based on a combination of surface and lidar measurements as well as WRF-Chem (Weather Research and Forecasting with Chemistry) and WACCM (Whole Atmosphere Community Climate Model) runs. The number of days with observed surface ozone levels exceeding the National Ambient Air Quality Standards exhibit a clear seasonal pattern, with a maximum during summer, when models suggest a minimum influence of stratospheric intrusions and the largest impact from Los Angeles Basin pollution transport. Additionally, measured and modeled surface ozone and PM10 were analyzed as a function of season, time of the day, and wind direction. Measurements and models are in good qualitative agreement, with maximum surface ozone observed for southwest and west winds. For the prevailing summer wind direction, slightly south of the ozone maximum and corresponding to south-southwest winds, lower ozone levels were observed. Back trajectories suggest that this is associated with transport from the central Los Angeles Basin, where titration limits the amount of surface ozone. A quantitative comparison of the lidar profiles with WRF-Chem and WACCM models revealed good agreement near the surface, with models showing an increasing positive bias as function of altitude, reaching 75 % at 15 km above sea level. Finally, three selected case studies covering the different mechanisms affecting the near-surface ozone concentration over the San Gabriel Mountains, namely stratospheric intrusions and pollution transport, are analyzed based on surface and ozone lidar measurements, as well as co-located ceilometer measurements and models.

Impact↗
NASA NTRS2019

Reviewing Benefits and Costs of Hydropower Development Evidence From the Lower Mekong River Basin

In this paper, we examine the benefits and costs of hydropower development in the Mekong River Basin. We compare four major reports—the Mekong River Commission's (MRC's) Basin Development Plan Programme, Phase 2 (BDP2), the Strategic Environmental Assessment of Hydropower on the Mekong Mainstream (SEA), the Study on the Impacts of Mainstream Hydropower on the Mekong River (MDS), and the MRC's recent council study (CS)—in order to provide the basis for a comparative analysis of the major impact evaluation literature on mainstream dam construction in the Mekong River Basin for the period of 2010–2018. The primary objective of the review is to identify points of agreement, disagreement, inconsistency, and knowledge gaps. Both Mekong River Commission reports (BDP2 and CS) suggest extensive economic benefits for proposed hydropower development, whereas the SEA and MDS indicate that the net impact would be negative. The projected impacts of hydropower development on fisheries, sediment flows, and ecosystems vary widely both in economic and biophysical terms. However, all four reports point to decreased food security and loss of local livelihoods for millions of people as major concerns related to dam development. While considerable resources have been devoted to producing these important studies, the lack of standardization across reports, especially assumptions and methodologies for economic impacts, frustrates efforts at meaningful comparison of their findings and precludes the prospect of clear analytical outcomes or policy impacts.

Cumulative impact assessment↗
NASA NTRS2024

Multitemporal landslide inventory and susceptibility map for the Arun River Basin, Nepal

The transboundary Arun River Basin (ARB) spreads across Nepal and Tibet. Nearly 95% of the basin lies in Tibet through which the Pumqu River flows, forming the Arun River once it enters Nepal. The ARB has five large hydropower projects undergoing construction or planned for the future. Rainfall and earthquake-induced landslides, landslide dammed lakes and landslide-induced glacial lake outburst floods pose major risks to smooth operation of these projects. To safeguard upcoming hydropower projects, areas susceptible to landslides in the ARB must be identified. We used high-resolution satellite imagery and open-source tools to generate a multitemporal landslide inventory for the basin. The rigorously quality-controlled inventory represents a yearly record of landslides from 2011 to 2020. A data-driven approach was used to map areas susceptible to landslides within the ARB. The multitemporal landslide inventory combined with other readily available Earth observation-based variables were used to create a landslide susceptibility map. The susceptibility analysis provides a valuable initial estimate of where landslides are likely to initiate. These landslide products could form the basis of more comprehensive local studies to inform hydropower project development.

Arun River Basin↗
NASA NTRS1971

The Role of Remotely Sensed and Relayed Data in the Delaware River Basin

The planned integration of the existing water quality monitoring and data processing systems in the Delaware River Basin with a data relay experiment proposed for the ERTS-1 is discussed. The experiment is designed to use ERTS-1 as a data relay link for a maximum of 20 hydrologic stations in the basin, including stream gaging, reservoir level, ground water level, and water quality monitoring stations. This experiment has the potential for reducing the time lag between data collection and dissemination to less than 12 hours. The experiment will also provide impetus to develop an operational system of real time data processing and dissemination to handle the large quantity of data that will be obtained from the stations in the basin. The results of this experiment will demonstrate the relative merits of satellite relay of data versus conventional means of data telemetry and will provide a basis for the development of operational satellite relay of hydrologic data.

Paulson, R. W.↗
NASA NTRS1973

Near real time water resources data for river basin management

The author has identified the following significant results. Twenty Data Collection Platforms (DCP) are being field installed on USGS water resources stations in the Delaware River Basin. DCP's have been successfully installed and are operating well on five stream gaging stations, three observation wells, and one water quality monitor in the basin. DCP's have been installed at nine additional water quality monitors, and work is progressing on interfacing the platforms to the monitors. ERTS-related water resources data from the platforms are being provided in near real time, by the Goddard Space Flight Center to the Pennsylvania district, Water Resources Division, U.S. Geological Survey. On a daily basis, the data are computer processed by the Survey and provided to the Delaware River Basin Commission. Each daily summary contains data that were relayed during 4 or 5 of the 15 orbits made by ERTS-1 during the previous day. Water resources parameters relays by the platforms include dissolved oxygen concentrations, temperature, pH, specific conductance, well level, and stream gage height, which is used to compute stream flow for the daily summary.

Paulson, R. W.↗
NASA NTRS1972

Cayley formation interpreted as basin ejecta, part B

Improved information on the morphology and distribution of the Cayley Formation, provided by Apollo 16 orbital photography, leads to a concept in which the Cayley Formation was deposited as fluidized debris that traveled beyond the presently recognizable extent of the Imbrium Basin ejecta. By this hypothesis, each basin-forming event produced thick plains deposits in a belt peripheral to the continuous ejecta blanket and may have deposited a thinner layer in pools over the entire moon. Thus, each patch of terra plains is likely to be underlain by a sequence of fluidized ejecta deposits, which were derived from most or all multi-ring basins younger than the occupied depression. If the light color of the plains results from a high feldspar content of the excavated crustal rocks, an explanation of the absence of exposed pre-Cayley mare rocks may be that they are buried or dusted over.

Eggleton, R. E.↗
NASA NTRS1973

Interpretation of land use and stream order, Pawnee River Basin, Kansas

The author has identified the following significant results. Land use and stream orders were mapped from ERTS-1 imagery covering the Pawnee River Basin. Total area of the basin, irrigated dry land crop area, and rangeland area were determined. The stream order of the basin was calculated by the Strahler method and provided more detail than is available on the comparable 1:250,000 sheets. This study has demonstrated the feasibility of using ERTS-1 imagery to map stream networks in greater detail than is required for 1:250,000 scale. The utility of ERTS-1 has also been demonstrated for mapping and mensuration of data relating to performance of ground cover types and the extent of irrigation.

Morain, S. A.↗
NASA NTRS1974

Seismic effects from major basin formation on the Moon and Mercury

Grooved and hilly terrains are reported which occur at the antipode of major basins on the Moon (Imbrium, Orientale) and Mercury (Caloris). Order-of-magnitude calculations, for an Imbrium-size impact on the Moon, indicate P-wave-induced surface displacements of 10 m at the basin antipode that would arrive prior to secondary ejecta. Comparable surface waves are reported which would arrive subsequent to secondary ejecta impacts and would increase in magnitude as they converge at the antipode. Other seismically induced surface features include: subdued, furrowed crater walls produced by landslides and concomitant secondary impacts; emplacement and leveling of light plains units owing to seismically induced "fluidization" of slide material; knobby, pitted terrain around old basins from enhancement of seismic waves in ancient ejecta blankets; and the production and enhancement of deep-seated fractures that led to the concentration of farside lunar maria in the Apollo-Ingenii region.

Schultz, P. H.↗
NASA NTRS1975

Investigation of relationships between linears, total and hazy areas, and petroleum production in the Williston Basin: An ERTS approach

The author has identified the following significant results. ERTS-1 imagery in a variety of formats was used to locate linear, tonal, and hazy features and to relate them to areas of hydrocarbon production in the Williston Basin of North Dakota, eastern Montana, and northern South Dakota. Derivative maps of rectilinear, curvilinear, tonal, and hazy features were made using standard laboratory techniques. Mapping of rectilinears on both bands 5 and 7 over the entire region indicated the presence of a northeast-southwest and a northwest-southeast regional trend which is indicative of the bedrock fracture pattern in the basin. Curved lines generally bound areas of unique tone, maps of tonal patterns repeat many of the boundaries seen on curvilinear maps. Tones were best analyzed on spring and fall imagery in the Williston Basin. It is postulated that hazy areas are caused by atmospheric phenomena. The ability to use ERTS imagery as an exploration tool was examined where petroleum and gas are presently produced (Bottineau Field, Nesson and Antelope anticlines, Redwing Creek, and Cedar Creek anticline). It is determined that some tonal and linear features coincide with location of present production in Redwing and Cedar Creeks. In the remaining cases, targets could not be sufficiently well defined to justify this method.

Erickson, J. M.↗
NASA NTRS1975

Comparison of different methods for estimating snowcover in forested, mountainous basins using LANDSAT (ERTS) images

Snow-covered areas on LANDSAT (ERTS) images of the Santiam River basin, Oregon, and other basins in Washington were measured using several operators and methods. Seven methods were used: (1) Snowline tracing followed by measurement with planimeter, (2) mean snowline altitudes determined from many locations, (3) estimates in 2.5 x 2.5 km boxes of snow-covered area with reference to snow-free images, (4) single radiance-threshold level for entire basin, (5) radiance-threshold setting locally edited by reference to altitude contours and other images, (6) two-band color-sensitive extraction locally edited as in (5), and (7) digital (spectral) pattern recognition techniques. The seven methods are compared in regard to speed of measurement, precision, the ability to recognize snow in deep shadow or in trees, relative cost, and whether useful supplemental data are produced.

Meier, M. J.↗
NASA NTRS1974

Selected satellite data on snow and ice in the Great Lakes basin 1972-73 /IFYGL/

Three snow-extent maps of the Lake Ontario drainage basin were prepared from NOAA-2 satellite visible band images during the International Field Year for the Great Lakes. These maps are discussed and the satellite data are evaluated for snow-extent mapping. The value of ERTS-1 imagery and digital data is also discussed in relation to the Lake Ontario basin studies. ERTS-1 MSS data are excellent for ice identification and analysis but are not useful for forecasting where timely receipt of data is imperative. NOAA-2 VHRR data are timely but the lower resolution of the VHRR makes identification of certain ice features difficult. NOAA-2 VHRR is well suited for snow-extent maps and thermal maps of large areas such as the 19,000 sq-km Lake Ontario basin.

Wiesnet, D. R.↗
NASA NTRS1977

Early impact basins and the onset of plate tectonics

The fundamental crustal dichotomy of the Earth (high and low density crust) was established nearly 4 billion years ago. Therefore, subductable crust was concentrated at the surface of the Earth very early in its history, making possible an early onset for plate tectonics. Simple thermal history calculations spanning 1 billion years show that the basin forming impact thins the lithosphere by at least 25%, and increases the sublithosphere thermal gradients by roughly 20%. The corresponding increase in convective heat transport, combined with the highly fractured nature of the thinned basin lithosphere, suggest that lithospheric breakup or rifting occurred shortly after the formation of the basins. Conditions appropriate for early rifting persisted from some 100,000,000 years following impact. We suggest a very early stage of high temperature, fast spreading "microplate" tectonics, originating before 3.5 billion years ago, and gradually stabilizing over the Archaean into more modern large plate or Wilson Cycle tectonics.

Frey, H.↗
NASA NTRS1976

Modes of emplacement of basalt terrains and an analysis of mare volcanism in the Orientale Basin

Three distinctive types of basalt terrains can be recognized on earth on the basis of surface morphology: flood basalts, shield basalts, and plains basalts, each of which reflects unique styles of eruption and modes of emplacement. Two of these, flood basalts and plains basalts, appear to be important in the emplacement of mare basalts on the moon. Using surface features as identifying criteria, mare units in the Orientale Basin were examined and the following emplacement sequence was derived: (1) initial emplacement of impact melt in the basin center, (2) eruption of flood-type basalts in the basin center and approximately concurrent emplacement of plains type basalts in Lacus Veris, and (3) emplacement of plains type basalts in Lacus Autumni

Greeley, R.↗
NASA NTRS1977

Lunar basins and craters - Evidence for systematic compositional changes of bombarding population

Of the 33 lunar samples considered in the investigation, 31 came from the North Ray Crater. The relationship between meteoritic component and rock type is studied. There appears to be some correlation between the meteoritic component, as given by the Ir/Au ratio, and the rock type, as given by the U content. The relation of ancient meteoritic components to basins and craters is examined, taking into account the resolution of groups, the relative ages from clast-matrix relations, assignments to specific basins or craters, and the relation between meteoritic components and Woenke's 'primary matter'. A table shows seven meteorite-free samples which are all low-alkali cataclastic anorthosites, or anorthositic clasts in light-matrix breccias. The origin of ancient meteoritic bodies are also investigated. The latest data strengthen earlier conclusions that the basin-forming objects were genetically related to the moon.

Hertogen, J.↗
NASA NTRS1977

Nested-crater model of lunar ringed basins

We propose a model for the origin of impact-basin rings whereby the main topographic rim of a basin approximates the limit of excavation and inner rings approximate the rims of craters formed inside the transient crater by some perturbation in the cratering process. The cause of this complexity in transient cavities may be the presence of discontinuities in the target material. The second inward ring may have formed at the seismic discontinuity about 20 km deep in the lunar crust, and the third, innermost ring of a few large basins at the crust-mantle interface about 60 km deep. Slumping increased the original diameters of many rings and split some initially coherent rings into subsidiary or partial rings. Deformation outside the transient crater produced external arcs. This model differs from prevalent hypotheses of ring formation whereby an inner ring approximates the transient crater rim and major faulting of the flank produced the outer ring structures.

Wilhelms, D. E.↗
NASA NTRS1977

Origin of outer rings in lunar multi-ringed basins - Evidence from morphology and ring spacing

The reported investigation has the objective to examine both the morphology and morphometry of several of the freshest lunar basins including Orientale, Imbrium, Nectaris, Crisium, and Humorum, and to compare the characteristics of their three most prominent rings to features in smaller craters. On the basis of comparisons it is concluded that the outer basin ring forms within the region where significant structural uplift of the basin rim is to be expected. Therefore the formation of the outer ring scarp may be closely associated with structural uplift of the inner portion of the crater rim flank. According to a model suggested for the origin of the outer two rings, the cratering event formed two inner rings, a central peak ring, and an uplifted crater rim crest, with deposition of ejecta during the process.

Head, J. W.↗
NASA NTRS1977

Probable distribution of large impact basins on Venus - Comparison with Mercury and the moon

The reported study is based on the 12.5 cm wavelength data of Rumsey et al. (1974). The considered low resolution (80 km) radar image covers an area equivalent to 19% of the surface of Venus. The study had the objective to map potential large impact structures and relate their size frequency distribution to those of Mercury and the moon. The Venus radar map was analyzed using a color television film density slicer system for enhancement of subtle changes and gross patterns of contrasting radar reflectivity. Analysis by this technique permitted the recognition of 12 possible basins with diameters exceeding 600 km on about 8% of the total surface area of the planet. The preliminary basin size frequency distribution determined for Venus from these low resolution data suggests that the cloud-covered planet could be more cratered per unit area by basins than either the moon or Mercury.

Schaber, G. G.↗
NASA NTRS1978

Radial thickness variations of Orientale basin ejecta

Moore et al. (1974) measure the thickness of Orientale basin ejecta on the basis of filling of individual prebasin craters and a depth-diameter relation for fresh lunar craters. In the reported investigation the concept of filling of preexisting craters with basin ejecta is utilized somewhat differently to ascertain Orientale basin ejecta thicknesses and volume from the Cordillera ring with a radius of 450 km out to almost 2 radii. Briefly, the approach is to assume a reasonable geometric model for the form of Orientale ejecta, calculate how many pre-Orientale craters would be destroyed by the deposition of the ejecta, and match the model to Orientale crater statistics. The results of the investigation show that a radial ejecta thickness function can be derived from crater statistics.

Cordell, B. M.↗