Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “balance function”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Simulation of DWPF Chemical Process Cell Using a Reaction Calorimeter

The Defense Waste Processing Facility (DWPF) converts liquid radioactive waste into glass using a Sludge Receipt Adjustment Tank (SRAT) and Slurry Mix Evaporator (SME) in addition to other processes. The SRAT and SME processes can be simulated on a small-scale using the Mettler-Toledo Reaction Calorimeter (RC1). This equipment is able to automate the execution and monitoring of experiments involving nonradioactive chemical simulants. During the chemical processing of sludge in the SRAT process, foam begins to form and can foam over the reaction vessel. The current antifoam used at DWPF creates a risk of increased flammability and has a limited pH range. Usually, mercury is circulated back into the reaction vessel during the SRAT process, making it difficult to remove. To combat foam over, novel antifoams will be tested during the boil-up process using the RC1. To improve mercury extraction, 3D-printed coalescer columns will be tested within the Mercury Water Wash Tank (MWWT) of the RC1. Testing of Simulant Sludge Batch 6 (SB6) was performed to ensure: the sludge would form a stable foam at boiling during full SRAT/SME runs; the antifoam would reduce the amount of foam within the vessel The sludge and a Precipitate Reactor Feed Tank (PRFT) simulant with monosodium titanate (MST) were mixed separately, combined, and then heated to boiling. As shown below, the antifoam used was able to eliminate the foam within the vessel, as expected. The FormLabs Form2 3D Printer can be used to create roughly 3-inch tall and 1-inch diameter columns from clear and ceramic resins. The columns will utilize chemical and physical forces to draw the mercury out of a condensed offgas stream leaving the RC1 reaction vessel. These columns will be tested during full SRAT/SME runs on the basis of how well they are able to collect elemental mercury. In preparation for full-scale runs, the RC1 equipment was assembled onto a custom table and tested with water runs. The software used to control automation, iControl, has a user-friendly interface that allows the experiment to be altered as needed. An example of the data recorded during an experimental run is represented in Figure 1 below. Water runs were utilized as a way to prove if the RC1 system was functioning in the following areas: Boil-up rates, Chemical additions using pumps, Temperature readings, Balance readings, Probe readings, Offgas system, Agitation. Future Plans: Five novel antifoams will be tested during full SRAT/SME runs. The most effective antifoam will be utilized in DWPF's Chemical Process Cell. The design of the Mercury Extraction Coalescer can be further manipulated to increase the extraction of not only elemental mercury, but other heavy metals in environmental remediation processes as well.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2023

Design of refractory multi-principal-element alloys for high-temperature applications

Abstract Refractory multi-principal-element alloys (RMPEAs) exhibit high specific strength at elevated temperatures ( T ). However, current RMPEAs lack a balance of room-temperature (RT) ductility, high- T strength, and high- T creep resistance. Using density-functional theory methods, we scanned composition space using four criteria: (1) formation energies for operational stability: $$-150\le {E}_{{\rm {f}}}$$ − 150 ≤ E f ≤ +70 meV per atom; (2) higher strength found via interstitial electron density with Young’s moduli E > 250 GPa; (3) inverse Pugh ratio for ductility: G / B < 0.57; and (4) high melting points: T m > 2500 °C. Using rapid bulk alloy synthesis and characterization, we validated theory and down-selected promising alloy compositions and discovered Mo 72.3 W 12.8 Ta 10.0 Ti 2.5 Zr 2.5 having well-balanced RT and high- T mechanical properties. This alloy has comparable high- T compressive strength to well-known MoNbTaW but is more ductile and more creep resistant. It is also superior to a commercial Mo-based refractory alloy and a nickel-based superalloy (Haynes-282) with improved high- T tensile strength and creep resistance.

36 MATERIALS SCIENCE↗
DOE OSTI2024

A transient site balance model for atomic layer etching

We present a transient site balance model of plasma-assisted atomic layer etching of silicon (Si) with alternating exposure to chlorine gas (Cl 2 ) and argon ions (Ar + ). Molecular dynamics (MD) simulation results are used to provide parameters for the model. The model couples the dynamics of a top monolayer surface region ('top layer') and a perfectly mixed subsurface region ('mixed layer'). The differential equations describing the rates of change of the Cl coverage in the two layers are transient mass balances. Model predictions include Cl coverages and rates of etching of various species from the surface as a function of Cl 2 or Ar + fluence. The simplified phenomenological model reproduces the MD simulation results well over a range of conditions. Comparing model predictions directly to experimental optical emission spectroscopy data, as reported in a previous paper, provides further evidence of the accuracy of the model.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Benchmarking Density Functional Theory Methods for Efficient Calculations of a Strongly Correlated Li 1– x Ni 1– y O 2−δ System

Transition metal oxides (TMOs), such as LiNiO 2 , are promising candidates for energy storage and electronic devices due to their unique electronic properties, exceptional physical and chemical characteristics, and ability to adopt multiple oxidation states. However, accurately predicting their properties using mean-field density functional theory (DFT) is challenging due to the presence of strongly correlated d-electrons and the complex interplay between their structural, electronic, and magnetic responses. These challenges are further exacerbated by the need to model defects, surfaces, and interfaces, which require computationally efficient, large-scale simulations. To address these issues, we carry out a benchmark study on the Li 1–x NiO 2 system, evaluating the performance of several popular functionals. Our findings demonstrate that combining SCAN functional relaxation with single-step HSE calculations provides a practical and scalable computational strategy. This approach balances accuracy and efficiency, enabling high-throughput simulations of strongly correlated TMOs and improved predictive modeling capability of TMOs for practical applications.

25 ENERGY STORAGE↗
DOE OSTI2021

Role of water model on ion dissociation at ambient conditions

In this work, we study ion pair dissociation in water at ambient conditions using a combination of classical and ab initio approaches. The goal of this study is to disentangle the sources of discrepancy observed in computed potentials of mean force. In particular, we aim to understand why some models favor the stability of solvent-separated ion pairs vs contact ion pairs. We found that some observed differences can be explained by non-converged simulation parameters. However, we also unveil that for some models, small changes in the solution density can have significant effects on modifying the equilibrium balance between the two configurations. We conclude that the thermodynamic stability of contact and solvent-separated ion pairs is very sensitive to the dielectric properties of the underlying simulation model. In general, classical models are very robust in providing a similar estimation of the contact ion pair stability, while this is much more variable in density functional theory-based models. The barrier to transition from the solvent-separated to contact ion pair is fundamentally dependent on the balance between electrostatic potential energy and entropy. This reflects the importance of water intra- and inter-molecular polarizability in obtaining an accurate description of the screened ion–ion interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Arbuscular mycorrhizal fungi equalize differences in plant fitness and facilitate plant species coexistence through niche differentiation

Mycorrhizal fungi are essential to the establishment of the vast majority of plant species but are often conceptualized with contradictory roles in plant community assembly. On the one hand, host-specific mycorrhizal fungi may allow a plant to be competitively dominant by enhancing growth. On the other hand, host-specific mycorrhizal fungi with different functional capabilities may increase nutrient niche partitioning, allowing plant species to coexist. Here, to resolve the balance of these two contradictory forces, we used a controlled greenhouse study to manipulate the presence of two main types of mycorrhizal fungus, ectomycorrhizal fungi and arbuscular mycorrhizal fungi, and used a range of conspecific and heterospecific competitor densities to investigate the role of mycorrhizal fungi in plant competition and coexistence. We find that the presence of arbuscular mycorrhizal fungi equalizes fitness differences between plants and stabilizes competition to create conditions for host species coexistence. Furthermore, our results show how below-ground mutualisms can shift outcomes of plant competition and that a holistic view of plant communities that incorporates their mycorrhizal partners is important in predicting plant community dynamics.

09 BIOMASS FUELS↗
DOE OSTI2022

Ensuring planetary survival: the centrality of organic carbon in balancing the multifunctional nature of soils

Not only do soils provide 98.7% of the calories consumed by humans, they also provide numerous other functions upon which planetary survivability closely depends. However, our continuously increasing focus on soils for biomass provision (food, fiber, and energy) through intensive agriculture is rapidly degrading soils and diminishing their capacity to deliver other vital functions. These tradeoffs in soil functionality – the increased provision of one function at the expense of other critical planetary functions – are the focus of this review. Here, we examine how land-use change for biomass provision has decreased the ability of soils to regulate the carbon pool and thereby contribute profoundly to climate change, to cycle the nutrients that sustain plant growth and ecosystem health, to protect the soil biodiversity upon which many other functions depend, and to cycle the Earth’s freshwater supplies. We also examine how this decreasing ability of soil to provide these other functions can be halted and reversed. Despite the complexity and the interconnectedness of soil functions, we show that soil organic carbon plays a central role and is a master indicator for soil functioning and that we require a better understanding of the factors controlling the behavior and persistence of C in soils. Given the threats facing humanity and their economies, it is imperative that we recognize that Soil Security is itself an existential challenge and that we need to increase our focus on the multiple functions of soils for long-term human welfare and survivability of the planet.

Carboncarbon sequestration↗
DOE OSTI2024

Distinct function of Chlamydomonas CTRA-CTR transporters in Cu assimilation and intracellular mobilization

Abstract Successful acclimation to copper (Cu) deficiency involves a fine balance between Cu import and export. In the green alga Chlamydomonas reinhardtii, Cu import is dependent on a transcription factor, Copper Response Regulator 1 (CRR1), responsible for activating genes in Cu-deficient cells. Among CRR1 target genes are two Cu transporters belonging to the CTR/COPT gene family (CTR1 and CTR2) and a related soluble protein (CTR3). The ancestor of these green algal proteins was likely acquired from an ancient chytrid and contained conserved cysteine-rich domains (named the CTR-associated domains, CTRA) that are predicted to be involved in Cu acquisition. We show by reverse genetics that Chlamydomonas CTR1 and CTR2 are canonical Cu importers albeit with distinct affinities, while loss of CTR3 did not result in an observable phenotype under the conditions tested. Mutation of CTR1, but not CTR2, recapitulates the poor growth of crr1 in Cu-deficient medium, consistent with a dominant role for CTR1 in high-affinity Cu(I) uptake. On the other hand, the overaccumulation of Cu(I) (20 times the quota) in zinc (Zn) deficiency depends on CRR1 and both CTR1 and CTR2. CRR1-dependent activation of CTR gene expression needed for Cu over-accumulation can be bypassed by the provision of excess Cu in the growth medium. Over-accumulated Cu is sequestered into the acidocalcisome but can become remobilized by restoring Zn nutrition. This mobilization is also CRR1-dependent, and requires activation of CTR2 expression, again distinguishing CTR2 from CTR1 and consistent with the lower substrate affinity of CTR2. One sentence summary Regulation of Cu uptake and sequestration by members of the CTR family of proteins in Chlamydomonas.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Profiling the BLAST bioinformatics application for load balancing on high-performance computing clusters

Abstract Background The Basic Local Alignment Search Tool (BLAST) is a suite of commonly used algorithms for identifying matches between biological sequences. The user supplies a database file and query file of sequences for BLAST to find identical sequences between the two. The typical millions of database and query sequences make BLAST computationally challenging but also well suited for parallelization on high-performance computing clusters. The efficacy of parallelization depends on the data partitioning, where the optimal data partitioning relies on an accurate performance model. In previous studies, a BLAST job was sped up by 27 times by partitioning the database and query among thousands of processor nodes. However, the optimality of the partitioning method was not studied. Unlike BLAST performance models proposed in the literature that usually have problem size and hardware configuration as the only variables, the execution time of a BLAST job is a function of database size, query size, and hardware capability. In this work, the nucleotide BLAST application BLASTN was profiled using three methods: shell-level profiling with the Unix “time” command, code-level profiling with the built-in “profiler” module, and system-level profiling with the Unix “gprof” program. The runtimes were measured for six node types, using six different database files and 15 query files, on a heterogeneous HPC cluster with 500+ nodes. The empirical measurement data were fitted with quadratic functions to develop performance models that were used to guide the data parallelization for BLASTN jobs. Results Profiling results showed that BLASTN contains more than 34,500 different functions, but a single function, RunMTBySplitDB, takes 99.12% of the total runtime. Among its 53 child functions, five core functions were identified to make up 92.12% of the overall BLASTN runtime. Based on the performance models, static load balancing algorithms can be applied to the BLASTN input data to minimize the runtime of the longest job on an HPC cluster. Four test cases being run on homogeneous and heterogeneous clusters were tested. Experiment results showed that the runtime can be reduced by 81% on a homogeneous cluster and by 20% on a heterogeneous cluster by re-distributing the workload. Discussion Optimal data partitioning can improve BLASTN’s overall runtime 5.4-fold in comparison with dividing the database and query into the same number of fragments. The proposed methodology can be used in the other applications in the BLAST+ suite or any other application as long as source code is available.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Multi-functional Sorbent Technology (MUST) for the Recovery/Removal of Critical/Heavy Metals from Fossil-Related Wastewater

A collection of remediation and recovery technologies like those predicated on photocatalytic-, electric-, chemical-, membrane-, and adsorptive-based processes currently exists in different stages of development or deployment between these methods of water management. Among these technologies, solid sorbent processes embody an optimal balance between cost-effectiveness, environmental friendliness, and technological maturity. The U.S. Department of Energy’s National Energy Technology Laboratory developed a suit of cross-linked, functionalized silica sorbents tailored to eliminate the most toxic metals regulated by the U.S. Environmental Protection Agency (EPA); critical metals identified by the U.S. Geological Survey (USGS); and harmful organics like the infamous perfluoroalkyl and polyfluoroalkyl substances (PFAS). An array of laboratory and field tests proved that the MUST sorbents removed ppb-level lead from drinking water, selenium from FGD wastewater below EPA limits, aqueous dyes and PFAS; and fractionated low ppm-level critical metals (CM) from AMD and simulated produced water. Proof-of-concept for commercial CM recovery was verified through obtaining milligram-quantities of purified Al solids from a sorbent multi-bed AMD field-site test. Commercial efficacy was further supported by achieving purified fractions of adsorbed Mn upon treating both the AMD and synthetic produced water with the laboratory multi-bed test unit.

Wilfong, Walter C.↗
DOE OSTI2025

Autonomous Synthesis and Inverse Design of Electrochromic Polymers with High Efficiency and Accuracy

Here, the design and synthesis of functional polymers, aimed at targeted properties through specific structures, have long been challenged by their complex and often nonlinear structure–property relationships. Key processes, including knowledge accumulation for predictive design and experimental refinement and validation, are traditionally labor-insensitive and time-consuming, making it difficult to balance accuracy and efficiency. Here, we introduce an accelerated, autonomous system for the on-demand synthesis of electronic polymers that achieves the desired electrochromic functionality with high accuracy and efficiency. Our approach leverages large language model-assisted data mining, a physics-informed copolymer machine learning model, and an AI-driven autonomous robotic workflow in the Polybot lab. Within 72 h, Polybot autonomously synthesized electrochromic polymers (ECPs) with targeted, previously-unreported color values, including green polymers with specific absorption profiles, precisely fine-tuning copolymer structures with a 5% step size in comonomer composition within a three-monomer system. A publicly accessible ECP informatics database has also been created to foster knowledge exchange.

AI-driven Robotic Lab↗
DOE OSTI2023

Utility Microgrid Controller Test Plan

The functional requirements of many microgrid controllers (MGCs) are expanding and evolving to meet growing utility and community needs. At a high level, the utility microgrid controller serves resilience and reliability use cases by coordinating transitions between grid-connected and islanded states and by managing the system during island operations. This includes control scenarios that require the microgrid controller to use flexible microgrid boundaries, maintain energy balance, coordinate with peer systems, and manage grid-forming (GFM) and grid-following (GFL) DER. In order to evaluate these functional enhancements, microgrid controller test plans must also be developed to ensure that the implemented controllers provide adequate performance. This report provides MGC test plans for both island operation and transition functions. The functions covered in this first edition report include feeder level energy management, island constraint management, secondary voltage and frequency control, black start, and synchronized reconnection. These test cases can be applied to utility-managed microgrid controllers that exclusively manage utility-owned equipment; the tests also apply to third-party managed microgrid controllers that coordinate with utility- and customer-owned equipment. The report can also be used by technology developers and project developers in industry to evaluate control strategies and performance characteristics for community microgrid controllers.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2026

Advancing density functional tight-binding method for large organic molecules through equivariant neural networks

Semi-empirical quantum-mechanical (QM) methods have become valuable tools for studying complex (bio)molecular systems due to their balance between computational efficiency and accuracy. A key aspect of these methods is their parameterization, which not only governs the reliability of the results but also provides an opportunity to enhance their overall performance. In our previous work [J. Phys. Chem. Lett., 2021, 11, 16], we advanced the third-order semi-empirical density functional tight-binding (DFTB3) method for computing multiple properties of small molecules by developing the machine learning (ML) potential NN rep to bridge the gap between DFTB3 electronic components and those of the hybrid DFT-PBE0 functional. To overcome the limitations of NN rep , we introduce the EquiDTB framework, which leverages physics-inspired equivariant neural networks (NN) to parameterize scalable and transferable many-body Δ TB potentials, replacing the standard pairwise DFTB repulsive potential. This advancement extends the applicability of our ML-corrected DFTB approach to larger molecules and non-covalent systems (including only C, N, O, and H atoms), going beyond the chemical space represented in the training QM datasets. The enhanced performance of EquiDTB over the standard TB methods is demonstrated by the accurate computation of the atomic forces of S66x8 molecular dimers, as well as their interaction energies. Moreover, EquiDTB can be effectively employed to explore the potential energy surfaces of large and flexible drug-like molecules—for example, to determine the minimum energy path between isomers, analyze structural transitions during dynamical simulations, compute vibrational modes, and investigate energetic rankings. The performance for single molecules slightly decreases when the DFTB electronic energy is reduced to first-order but remains superior to standard TB methods. Our work thus demonstrates that an optimal integration of an equivariant NN with QM datasets can advance the DFTB method while maintaining high efficiency, paving the way for reliable (bio)molecular simulations.

Medrano Sandonas, Leonardo [Technische Universität↗
DOE OSTI2023

A parallel p ‐adaptive discontinuous Galerkin method for the Euler equations with dynamic load‐balancing on tetrahedral grids

Abstract A novel p ‐adaptive discontinuous Galerkin (DG) method has been developed to solve the Euler equations on three‐dimensional tetrahedral grids. Hierarchical orthogonal basis functions are adopted for the DG spatial discretization while a third order TVD Runge‐Kutta method is used for the time integration. A vertex‐based limiter is applied to the numerical solution in order to eliminate oscillations in the high order method. An error indicator constructed from the solution of order and is used to adapt degrees of freedom in each computational element, which remarkably reduces the computational cost while still maintaining an accurate solution. The developed method is implemented with under the Charm++ parallel computing framework. Charm++ is a parallel computing framework that includes various load‐balancing strategies. Implementing the numerical solver under Charm++ system provides us with access to a suite of dynamic load balancing strategies. This can be efficiently used to alleviate the load imbalances created by p ‐adaptation. A number of numerical experiments are performed to demonstrate both the numerical accuracy and parallel performance of the developed p ‐adaptive DG method. It is observed that the unbalanced load distribution caused by the parallel p ‐adaptive DG method can be alleviated by the dynamic load balancing from Charm++ system. Due to this, high performance gain can be achieved. For the testcases studied in the current work, the parallel performance gain ranged from 1.5× to 3.7×. Therefore, the developed p ‐adaptive DG method can significantly reduce the total simulation time in comparison to the standard DG method without p ‐adaptation.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

DFT-guided flux synthesis of a family of layered titanates crystallizing in the lepidocrocite structure type

K 0.72 Fe 0.72 Ti 1.28 O 4 , a layered mixed-metal oxide belonging to the lepidocrocite structure type, was grown out of a molten KCl-KF mixture at 800 °C. The compound crystallizes in orthorhombic space group Cmcm and exhibits two-dimensional layers, composed of mixed Fe/Ti octahedra, separated by K ions that occupy the interlayer layer space and maintain charge balance. The targeted flux synthesis of the Ni, Cu, and Zn analogs was carried out after density functional theory (DFT) calculations predicted their formation to be energetically favorable, yielding K 0.77 Ni 0.38 Ti 1.62 O 4 , K 0.77 Cu 0.38 Ti 1.62 O 4 , and K 0.73 Zn 0.36 Ti 1.64 O 4 . Finally, all four compositions can be prepared via conventional solid-state technique by mixing and heating stoichiometric amounts of KNO 3 , appropriate transition metal oxide precursors, and TiO 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Carbon source–driven metabolic and regulatory remodeling defines phenomic states in Lipomyces starkeyi

Lipomyces is a genus of oleaginous yeasts with potential for contributing to reliable biomanufacturing supply chains. However, progress in advanced strain designs and engineering efforts are still constrained by a lack of understanding of the underlying molecular drivers of Lipomyces phenotypes. To address this gap, we collected a suite of multi-omic data to dissect how carbon source availability reshapes the metabolic network, lipid allocation, and regulatory architecture of Lipomyces starkeyi. We observed that glucose promotes biosynthetic and proliferative processes supported by abundant energy and carbon intermediates, xylose enhances redox-balancing mechanisms centered on the pentose phosphate pathway, and glycerol activates respiratory metabolism, ß-oxidation, and the glyoxylate cycle. Lipid species distributions remained consistent in both nitrogen replete and depleted conditions across the carbon sources, indicating robust production mechanisms. Regulatory protein identification and network analysis revealed glycerol-driven respiratory growth favors regulatory programs integrating stress tolerance, redox balance, and lipid-associated metabolism, whereas xylose growth activates compensatory transcriptional responses aimed at maintaining mitochondrial function. Nitrogen limitation modulates the strength of these responses but does not fundamentally alter their direction, reinforcing carbon source as the dominant driver of regulatory architecture. Taken together, this data enhances the understanding of Lipomyces molecular rearrangements and provides a foundation for further development of predictive phenotypic tools in this genus.

Biotechnology↗
DOE OSTI2021

MicroRNA-7 overexpression positively regulates the CD8+ SP cell development via targeting PIK3R1

Highlights: • MicroRNA-7 overexpression promotes CD8{sup +} SP cell development. • We identified PIK3R1 as a target of miR-7. • The miR-7/PIK3R1 axis regulates CD8{sup +} SP cell development via modulating the balance of AKT/ERK pathways. microRNA-7 (miR-7), a distinct miRNA family member, has been reported to be involved in the biological functions of immune cells. However, the potential role of miR-7 in the CD8{sup +} T cell development remains to be elucidated. In this study, we estimated the potential effects of miR-7 overexpression in the thymic CD8{sup +} SP cell development using miR-7 overexpression mice. Our results showed that compared with those in control wild type (WT) mice, the volume, weight and total cell numbers of thymus in miR-7 overexpression (OE) mice increased significantly. The absolute cell number of CD8{sup +} SP cells in miR-7 OE mice increased and its ability of activation and proliferation enhanced. Futhermore, we clarified that miR-7 overexpression had an intrinsic promote role in CD8{sup +} SP cell development by adoptive cell transfer assay. Mechanistically, the expression level of PIK3R1, a target of miR-7, decreased significantly in CD8{sup +} SP cells of miR-7 OE mice. Moreover, the expression level of phosphorylated (p)-AKT and p-ERK changed inversely and indicating that miR-7 overexpression impaired the balance of AKE and ERK pathways. In summary, our work reveals an essential role of miR-7 in promoting CD8{sup +} SP cell development through the regulation of PIK3R1 and balance of AKT and ERK pathways.

60 APPLIED LIFE SCIENCES↗