SEARCH · Engineering Papers

Results for “angular resolution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

All sources NASA NTRS DOE OSTI

NASA NTRS2011

Multiangle Implementation of Atmospheric Correction (MAIAC):: Radiative Transfer Basis and Look-up Tables - 1

This paper describes a radiative transfer basis of the algorithm MAIAC which performs simultaneous retrievals of atmospheric aerosol and bidirectional surface reflectance from the Moderate Resolution Imaging Spectroradiometer (MODIS). The retrievals are based on an accurate semianalytical solution for the top-of-atmosphere reflectance expressed as an explicit function of three parameters of the Ross-Thick Li-Sparse model of surface bidirectional reflectance. This solution depends on certain functions of atmospheric properties and geometry which are precomputed in the look-up table (LUT). This paper further considers correction of the LUT functions for variations of surface pressure/height and of atmospheric water vapor, which is a common task in the operational remote sensing. It introduces a new analytical method for the water vapor correction of the multiple ]scattering path radiance. It also summarizes the few basic principles that provide a high efficiency and accuracy of the LUT ]based radiative transfer for the aerosol/surface retrievals and optimize the size of LUT. For example, the single-scattering path radiance is calculated analytically for a given surface pressure and atmospheric water vapor. The same is true for the direct surface-reflected radiance, which along with the single-scattering path radiance largely defines the angular dependence of measurements. For these calculations, the aerosol phase functions and kernels of the surface bidirectional reflectance model are precalculated at a high angular resolution. The other radiative transfer functions depend rather smoothly on angles because of multiple scattering and can be calculated at coarser angular resolution to reduce the LUT size. At the same time, this resolution should be high enough to use the nearest neighbor geometry angles to avoid costly three ]dimensional interpolation. The pressure correction is implemented via linear interpolation between two LUTs computed for the standard and reduced pressure levels. A linear mixture and a modified linear mixture methods are used to represent different aerosol types in the aerosol/surface retrievals from several base models of the fine and coarse aerosol fractions. In summary, the developed LUT algorithm allows fast high-accuracy simulations of the outgoing radiance with full variability of the atmospheric and surface bidirectional reflectance properties for the aerosol/surface remote sensing.

Lyapustin, Alexei↗

DOE OSTI2024

Imaging and Segmenting Grains and Subgrains Using Backscattered Electron Techniques

We present two new methods of processing data from backscattered electron signals in a scanning electron microscope to image grains and subgrains. The first combines data from multiple backscattered electron images acquired at different specimen geometries to (1) better reveal grain boundaries in recrystallized microstructures and (2) distinguish between recrystallized and unrecrystallized regions in partially recrystallized microstructures. The second utilizes spherical harmonic transform indexing of electron backscatter diffraction patterns to produce high angular resolution orientation data that enable the characterization of subgrains. Subgrains are produced during high-temperature plastic deformation and have boundary misorientation angles ranging from a few degrees down to a few hundredths of a degree. Here, we also present an algorithm to automatically segment grains from combined backscattered electron image data or grains and subgrains from high angular resolution electron backscatter diffraction data. Together, these new techniques enable rapid measurements of individual grains and subgrains from large populations.

36 MATERIALS SCIENCE↗

NASA NTRS2003

Development of Mirror Segments for the Constellation-X Observatory

As NASA's next major X-ray observatory, Constellation-X will have a photon collection area of 30,000 sq cm at 1 keV, which, after folding other instrumental responses, translates into an effective area of 15,000 sq cm. The observatory consists of four identical satellites each of which carries a spectroscopic X-ray telescope mirror assembly (SXT) that is 1.6 m in diameter and has a focal length of 10 m and a collection area of 7,500 sq cm at 1 keV and an angular resolution of 15 sec. HPD (half-power diameter) at the system level. Each mirror assembly consists of a large number of mirror segments precisely assembled together. Our development of the mirror segments is divided into two steps. The first one is to develop the basic approach and fabricate segments within the constraints of existing infrastructure to meet the angular resolution requirement, but not mirror segment size requirement. We have all but successfully completed this part of the development. We are now on the verge of going into the second step, that is to fabricate mirror segments of larger sizes to reduce the number of segments that have to be aligned and integrated. In this paper, we report on the requirements and the development status of the mirror segments. These assembly and other requirements of the SXT are reported elsewhere.

Zhang, W.↗

NASA NTRS2014

Optics Developments for X-Ray Astronomy

X‐ray optics has revolutionized x‐ray astronomy. The degree of background suppression that these afford, have led to a tremendous increase in sensitivity. The current Chandra observatory has the same collecting area (approx. 10(exp 3)sq cm) as the non‐imaging UHURU observatory, the first x‐ray observatory which launched in 1970, but has 5 orders of magnitude more sensitivity due to its focusing optics. In addition, its 0.5 arcsec angular resolution has revealed a wealth of structure in many cosmic x‐ray sources. The Chandra observatory achieved its resolution by using relatively thick pieces of Zerodur glass, which were meticulously figured and polished to form the four‐shell nested array. The resulting optical assembly weighed around 1600 kg, and cost approximately $0.5B. The challenge for future x‐ray astronomy missions is to greatly increase the collecting area (by one or more orders of magnitude) while maintaining high angular resolution, and all within realistic mass and budget constraints. A review of the current status of US optics for x‐ray astronomy will be provided along with the challenges for future developments.

Ramsey, Brian↗

NASA NTRS2004

AS04-AS02-133 Electroformed-Nickel Hard-X-Ray Optic Development at NASA/MSFC

We are developing the nickel electroforming process to fabricate high-quality mirrors for the region. Two applications for these optics are a balloon-borne payload, termed HERO, and a hard-X-ray telescope module for consideration for the Constellation-X mission. In the formation on shells, of 15 arcsec angular resolution, will provide over 200 sq cm of effective collecting area unprecedented sensitivity in the 20-75 keV region. A first flight of a partial payload, feature approximately 1/4 of the total collecting area, is scheduled for the Spring of 2004. In the Co-application, two mirror shells, of diameters 150 and 230 mm, are being fabricated. This is particularly challenging as high angular resolution must be maintained with shells of only 1 mm thickness (driven by the tight weight budget for the mission). Further, the shells must be low (less than 5 A on sub-micron spatial scales) to permit efficient use of planned multilayer coatings which must release cleanly from their forming mandrels without any surface degradation.

Ramsey, Brian↗

NASA NTRS1986

MIPS - The Multiband Imaging Photometer for SIRTF

The Multiband Imaging Photometer for SIRTF (MIPS) is to be designed to reach as closely as possible the fundamental sensitivity and angular resolution limits for SIRTF over the 3 to 700 micron spectral region. It will use high performance photoconductive detectors from 3 to 200 micron with integrating JFET amplifiers. From 200 to 700 microns, the MIPS will use a bolometer cooled by an adiabatic demagnetization refrigerator. Over much of its operating range, the MIPS will make possible observations at and beyond the conventional Rayleigh diffraction limit of angular resolution.

Rieke, G. H.↗

NASA NTRS1986

MIPS - The Multiband Imaging Photometer for SIRTF

The Multiband Imaging Photometer System (MIPS) for SIRTF is to be designed to reach as closely as possible the fundamental sensitivity and angular resolution limits for SIRTF over the 3 to 700 microns spectral region. It will use high performance photoconductive detectors from 3 to 200 microns with integrating JFET amplifiers. From 200 to 700 microns, the MIPS will use a bolometer cooled by an adiabatic demagnetization refrigerator. Over much of its operating range, the MIPS will make possible observations at and beyond the conventional Rayleigh diffraction limit of angular resolution.

Rieke, G. H.↗

NASA NTRS1990

CS J = 2 yields 1 emission toward the central region of M82

M82 is an irregular (Type II) galaxy located at a distance of approximately 3.5 Mpc. Its unusual appearance and high luminosity, particularly in the infrared, has led many astronomers to classify it as a starburst galaxy. This interpretation is supported by the observation of a large number of radio continuum sources within the central arcminute of the galaxy. These sources are thought to be associated with supernova remnants. The starburst in the central region of the galaxy is believed to have been triggered by tidal interaction with either M81 or the HI cloud surrounding the M81 group. High angular resolution CO-12 J=1 to 0 maps by Nakai (1984) and Lo et al. (1987) indicate the existence of a 400 to 450 pc rotating ring of molecular material about the central region of M82. Red- and blue-shifted absorption components of the HI and OH lines measured by Weliachew et al. (1984) provided the first evidence for the presence of the ring. Many astronomers, each using a different angular resolution, have compared CO-12 J=1 to 0, J=2 to 1, and J=3 to 2 emission and concluded that a large fraction of the CO emission is optically thin. Additional observations suggest that the molecular material toward the center of M82 is clumpy and dense. Unlike the lower rotational transitions of CO, CS is excited only at relatively high densities, n sub H sub 2 greater than or equal to 10(exp 4) cm(-3). It is in clouds with these densities that stars are expected to form. This makes CS an excellent probe of star formation regions. Researchers observed the CS J=2 to 1 transition (97.981 GHz) toward 52 positions in M82 using the National Radio Astronomy Observatory (NRAO) 12 m telescope.

Walker, C. E.↗

NASA NTRS2008

MASSIM, the Milli-Arc-Second Structure Imager

The MASSIM (Milli-Arc-Second Structure Imager) mission will use a set of achromatic diffractive-refractive Fresnel lenses to achieve imaging in the X-ray band with unprecedented angular resolution. It has been proposed for study within the context of NASA's "Astrophysics Strategic Mission Concept Studies" program. Lenses on an optics spacecraft will focus 5-11 keV X-rays onto detectors on a second spacecraft flying in formation 1000 km away. It will have a point-source sensitivity comparable with that of the current generation of major X-ray observatories (Chandra, XMM-Newton) but an angular resolution some three orders of magnitude better. MASSIM is optimized for the study of jets and other phenomena that occur in the immediate vicinity of black holes and neutron stars. It can also be used for studying other phenomena on the milli-arc-second scale, such as those involving proto-stars, the surfaces and surroundings of nearby active stars and interacting winds.

Skinner, Gerry↗

NASA NTRS1994

Direct imaging of planetary systems with a ground-based radio telescope array

The National Radio Astronomy Observatory's proposed Millimeter Array (MMA) will bring unprecedented sensitivity, angular resolution, and image dynamic range to the millimeter wavelength region of the spectrum. An obvious question is whether such an instrument could be used to detect planets orbiting nearby stars. The techniques of aperture synthesis imaging developed for centimeter wavelength radio arrays are capable of producing images whose dynamic ranges greatly exceed the brightness ratio of a solar-type star and a Jupiter-like planet at sub-millimeter or millimeter wavelengths. The angular resolution required to separate a star and planet at a few pc distance can be obtained with baselines of several km. The greatest challenge is sensitivity. At the highest possible observing frequencies (approximately 300 GHz for typical high, dry sites, and approximately 900 GHz from the Antarctic plateau), the proposed MMA will be unable to detect the thermal emission from a Jupiter-like planet a few pc away. An upgraded MMA operating near 300 GHz with twice the currently proposed number of antennas, a 20% fractional bandwidth, and improved receivers could detect Jupiter at 4 pc in a few months. Building such an array on the Antarctic plateau and operating at approximately 900 GHz would allow Jupiter at 4 pc to be detected in approximately one day of observing time.

Jones, Dayton L.↗

NASA NTRS2011

Development of the ASTRO-H Soft X-ray Telescope (SXT): Engineering Model Performance

The X-ray astronomy satellite ASTRO-H, being developed under the collaboration among JAXA, NASA's GSFC and ESA, will have two Soft X-ray Telescopes (SXTs), among other instuments onboard, with a sensitive energy band below 12 keV. One is for an X-ray micorocalorimeter detector and the other for a X-ray CCD detector. The SXT uses a conically approximated Wolter I grazing incidence optic implemented by thin aluminum foil substrates with thickness of 0.152, 0.229, and 0.305 mm. It is similar to the Suzaku XRT, but with larger diameter (45 cm) and longer focal length (5.6 m). Goal of the angular resolution and effective area are 1 arcmin and 390 cm$A2$ at 6 keV, respectively. We made serveral improvements from Suzaku to ASTRO-H, such as thicker substrates, more forming mandrels, thinner epoxy layer for replication, stiffer housings, precise alignment bars, etc. With all these changes, we have fabricated the engineering test unit of the SXT. In this paper, we will discuss all the changes made, their effects, and report X-ray performance of the SXT test unit. An angular resolution of the test unit was measured at new Goddard X-ray calibration facility (100 m X-ray beamline) and was found to be 1.1 arcmin. We will also discuss further improvements toward the flight unit to be delivered to JAXA in 2012.

Okajima, Takashi↗

NASA NTRS2013

Segmented X-Ray Optics for Future Space Telescopes

Lightweight and high resolution mirrors are needed for future space-based X-ray telescopes to achieve advances in high-energy astrophysics. The slumped glass mirror technology in development at NASA GSFC aims to build X-ray mirror modules with an area to mass ratio of approx.17 sq cm/kg at 1 keV and a resolution of 10 arc-sec Half Power Diameter (HPD) or better at an affordable cost. As the technology nears the performance requirements, additional engineering effort is needed to ensure the modules are compatible with space-flight. This paper describes Flight Mirror Assembly (FMA) designs for several X-ray astrophysics missions studied by NASA and defines generic driving requirements and subsequent verification tests necessary to advance technology readiness for mission implementation. The requirement to perform X-ray testing in a horizontal beam, based on the orientation of existing facilities, is particularly burdensome on the mirror technology, necessitating mechanical over-constraint of the mirror segments and stiffening of the modules in order to prevent self-weight deformation errors from dominating the measured performance. This requirement, in turn, drives the mass and complexity of the system while limiting the testable angular resolution. Design options for a vertical X-ray test facility alleviating these issues are explored. An alternate mirror and module design using kinematic constraint of the mirror segments, enabled by a vertical test facility, is proposed. The kinematic mounting concept has significant advantages including potential for higher angular resolution, simplified mirror integration, and relaxed thermal requirements. However, it presents new challenges including low vibration modes and imperfections in kinematic constraint. Implementation concepts overcoming these challenges are described along with preliminary test and analysis results demonstrating the feasibility of kinematically mounting slumped glass mirror segments.

McClelland, Ryan S.↗

DOE OSTI2022

Exploring the MeV sky with a combined coded mask and Compton telescope: the Galactic Explorer with a Coded aperture mask Compton telescope (GECCO)

The sky at MeV energies is currently poorly explored. Here we present an innovative mission concept that builds upon the heritage of past and current missions improving the sensitivity and, very importantly, the angular resolution. This consists in combining a Compton telescope and a coded-mask telescope. We delineate the motivation for such a concept and we define the scientific goals for such a mission. The Galactic Explorer with a Coded Aperture Mask Compton Telescope (GECCO) is a novel concept for a next-generation telescope covering hard X-ray and soft gamma-ray energies. The potential and importance of this approach that bridges the observational gap in the MeV energy range are presented. With the unprecedented angular resolution of the coded mask telescope combined with the sensitive Compton telescope, a mission such as GECCO can disentangle the discrete sources from the truly diffuse emission. Individual Galactic and extragalactic sources are detected. This also allows to understand the gamma-ray Galactic center excess and the Fermi Bubbles, and to trace the low-energy cosmic rays, and their propagation in the Galaxy. Nuclear and annihilation lines are spatially and spectrally resolved from the continuum emission and from sources, addressing the role of low-energy cosmic rays in star formation and galaxy evolution, the origin of the 511 keV positron line, fundamental physics, and the chemical enrichment in the Galaxy. Such an instrument also detects explosive transient gamma-ray sources, which, in turn, enables identifying and studying the astrophysical objects that produce gravitational waves and neutrinos in a multi-messenger context. By looking at a poorly explored energy band it also allows discoveries of new astrophysical phenomena.

79 ASTRONOMY AND ASTROPHYSICS↗

NASA NTRSDate not supplied

VTXO: The Virtual Telescope for X-ray Observations

The Virtual Telescope for X-ray Observations (VTXO) will use lightweight Phase Frensel Lenses (PFLs) in a virtual X-ray telescope with⇠1 km focal length and with⇠50 milli-arc second angular resolution. VTXO is formed by using precision formation flying of two SmallSats: a smaller OpticsSat that houses the PFLs and navigation beacons while a larger DetectorSat contains an X-ray camera, a precision start tracker, and the propulsion for the formation flying. The baseline flight dynamics uses a highly elliptical super synchronous orbit allow the formation to hold in an inertial frame around the 90,000 km apogee for 10 hours of the 32.5 hour orbit with nearly a year mission lifetime. VTXO’s fine angular resolution enables measuring the environments close to the central engines of bright compact X-ray sources. This X-ray imaging capability allows for the study of the effects of dust scattering near to the central objects such as Cyg X-3 and GX 5-1, for the search for jet structure near to the compact object in X-ray novae such as Cyg X-1 and GRS 1915+105, and for the search for structure in the termination shock of in the Crab pulsar wind nebula. The VTXO SmallSat and instrument designs, mission parameters, and science performance are described. VTXO development was supported as one of the selected 2018 NASA Astrophysics SmallSat Study (AS3) missions

John F Krizmanic↗

NASA NTRS2022

Exploring the MeV Sky With A Combined Coded Mask and Compton Telescope: the Galactic Explorer With A Coded Aperture Mask Compton Telescope (GECCO)

Elena Orlando↗

NASA NTRS1990

CO mapping of the nuclear region of NGC 6946 and IC 342 with Nobeyama millimeter array

CO observations of nearby galaxies with nuclear active star forming regions (and starburst galaxies) with angular resolutions around 7 seconds revealed that molecular bars with a length of a few kiloparsecs have been formed in the central regions of the galaxies. The molecular bar is interpreted as part of shock waves induced by an oval or barred potential field. By shock dissipation or dissipative cloud-cloud collisions, the molecular gas gains an infall motion and the nuclear star formation activity is fueled. But the distribution and kinematics of the molecular gas in the nuclear regions, which are sites of active star formation, remain unknown. Higher angular resolutions are needed to investigate the gas in the nuclear regions. Researchers made aperture synthesis observations of the nuclear region of the late-type spiral galaxies NGC 6946 and IC 342 with resolutions of 7.6 seconds x 4.2 seconds (P.A. = 147 deg) and 2.4 seconds x 2.3 seconds (P.A. = 149 deg), respectively. The distances to NGC 6496 and IC 342 are assumed to be 5.5 Mpc and 3.9 Mpc, respectively. Researchers have found 100-300 pc nuclear gas disk and ring inside a few kpc molecular gas bars. Researchers present the results of the observations and propose a possible mechanism of active star formation in the nuclear region.

Ishizuki, Sumio↗

DOE OSTI2023

Characterizing the expected behavior of non-Poissonian template fitting

We have performed a systematic study of the statistical behavior of non-Poissonian template fitting (NPTF), a method designed to analyze and characterize unresolved point sources in general counts datasets. Here, in this paper, we focus on the properties and characteristics of the Fermi-LAT gamma-ray data set. In particular, we have simulated and analyzed gamma-ray sky maps under varying conditions of exposure, angular resolution, pixel size, energy window, event selection, and source brightness. We describe how these conditions affect the sensitivity of NPTF to the presence of point sources, for inner-galaxy studies of point sources within the Galactic Center excess, and for the simplified case of isotropic emission. We do not find opportunities for major gains in sensitivity from varying these choices, within the range available with current Fermi-LAT data. We provide an analytic estimate of the NPTF sensitivity to point sources for the case of isotropic emission and perfect angular resolution, and find good agreement with our numerical results for that case.

79 ASTRONOMY AND ASTROPHYSICS↗

NASA NTRS2010

Thin Shell, Segmented X-Ray Mirrors

Thin foil mirrors were introduced as a means of achieving high throughput in an X-ray astronomical imaging system in applications for which high angular resolution were not necessary. Since their introduction, their high filling factor, modest mass, relative ease of construction, and modest cost have led to their use in numerous X-ray observatories, including the Broad Band X-ray Telescope, ASCA, and Suzaku. The introduction of key innovations, including epoxy replicated surfaces, multilayer coatings, and glass mirror substrates, has led to performance improvements, and in their becoming widely used for X-ray astronomical imaging at energies above 10 keV. The use of glass substrates has also led to substantial improvement in angular resolution, and thus their incorporation into the NASA concept for the International X-ray Observatory with a planned 3 in diameter aperture. This paper traces the development of foil mirrors from their inception in the 1970's through their current and anticipated future applications.

Petre, Robert↗