Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Wisconsin”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

High-throughput ion irradiation of additively manufactured compositionally complex alloys

Several advanced nuclear reactor designs promise efficiency and safety improvements over the current reactor fleet but are limited by the current set of ASME code-qualified materials. Novel alloys including high-entropy alloys (HEAs), and more broadly compositionally complex alloys (CCAs), have shown promising irradiation-tolerance. However, the vast range of alloy compositions adds to an already time-consuming alloy development process. In this study, to accelerate the development of novel alloys for nuclear applications, a high-throughput (HTP) methodology has been employed. Additive manufacturing has been used to produce a compositional array of unary, binary, ternary, and quaternary alloys, including several CCAs, which span the Cr-Fe-Mn-Ni composition space. Additionally, the compositional array was homogenized at 1000°C for 24 hours and each sample was irradiated using 4-MeV Ni2+ ions at room temperature to a peak damage of 50 dpa, as estimated using SRIM, at the University of Wisconsin Ion Beam Laboratory. A custom XY stage was built to accommodate the large compositional array and half of each sample was masked during irradiation enabling both the irradiated and unirradiated properties of each alloy to be characterized side-by-side. Each alloy was characterized using X-ray fluorescence (XRF), X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), and nanoindentation. CALPHAD simulations spanning the entire Cr-Fe-Mn-Ni composition space at 1000°C were performed to compare predicted equilibrium phases with phases identified experimentally from the unirradiated regions of each alloy. Nanoindentation measurements indicate radiation-induced hardening ranging from ~1-1.5 GPa in each of Cr-Fe-Mn-Ni CCAs, which is relatively insensitive to modest changes in alloy composition and comparable to hardening observed in neutron irradiated Cr-Fe-Mn-Ni CCAs in the literature. Overall, a substantial time savings was realized by employing HTP synthesis, irradiation, and characterization in this study compared to conventional techniques, the implications of which are discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2014

Benchmarking of the FENDL-3 Neutron Cross-section Data Starter Library for Fusion Applications

This paper summarizes the benchmark analyses performed in a joint effort of ENEA (Italy), JAEA (Japan), KIT (Germany), and the University of Wisconsin (USA) on a computational ITER benchmark and a series of 14 MeV neutron benchmark experiments. The computational benchmark revealed a modest increase of the neutron flux levels in the deep penetration regions and a substantial increase of the gas production in steel components. The comparison to experimental results showed good agreement with no substantial differences between FENDL-3.0 and FENDL-2.1 for most of the responses. In general, FENDL-3 shows an improved performance for fusion neutronics applications.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Development of a versatile, high-temperature, high-throughput ion irradiation system

We report ion irradiation has long been used as a surrogate for neutron irradiation experiments which are comparatively slower, more expensive, and often can leave materials activated and difficult to handle post-irradiation. However, with the growing use of combinatorial synthesis methods and high-throughput, automated characterization techniques, ion irradiation facilities will need to upgrade their capabilities to be able to accommodate these new material platforms. To address this challenge, a high-throughput ion irradiation system has been developed at the University of Wisconsin-Madison Ion Beam Laboratory (IBL). The system is capable of accommodating large sample arrays of arbitrary geometries and heat samples individually using an infrared laser to enable high-temperature, high-throughput ion irradiation while mitigating the risk of annealing the irradiation damage in nearby samples. To control stage motion, laser power, and beam current measurement, among other tasks, the program Chronos was developed which enables automated high-throughput irradiation experiments.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2020

Durability test of a flowing-water target for isotope harvesting

A high intensity proton irradiation was performed with the flowing-water isotope harvesting target at the University of Wisconsin-Madison Cyclotron Laboratory to measure the rate of degradation of the target shell during irradiation conditions. The beam reached an intensity of 34 µA by the end of the irradiation and covered an area of 0.7 cm 2 on the target. Radiolysis products, such as H 2 O 2 , H 2 , and O 2 , were measured in the bulk water of the system and found to be present at much lower levels than predicted by literature escape yields. Radionuclides formed in the target shell were measured in the system water as a radiotracer for target degradation. Using a simple, beam intensity dependent model, a corrosion rate of 1.5E-6 μm/(μA*s) was found to match the measured radiotracer activities at various points in the irradiation. Furthermore, this rate was used to extrapolate the lifetime of future isotope harvesting targets at the NSCL and FRIB, using the areal power density of different ion beams to scale the corrosion rate.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

High speed PLIF study of the Richtmyer–Meshkov instability upon re-shock

The Richtmyer–Meshkov instability (RMI) of a twice-shocked gas interface is researched using high-speed planar-laser induced fluorescence (PLIF) in the Wisconsin Shock Tube Laboratory’s vertical shock tube. The initial condition (IC) is a shear layer with broadband diffuse perturbations at the interface between a helium-acetone mixture and argon. This IC is accelerated by a shock of nominal strength M = 1.8, and then accelerated again by the transmitted shock that reflects off the end wall of the tube. An estimate of the light gas mole fraction is extracted from high-speed imaging using an iterative process that accounts for the nonlinear temperature dependence of the acetone’s fluorescence quantum yield (FQY) and absorption cross-section. A vorticity deposition model for the initial growth rate after reshock is compared with the Mikaelian model for re-shock. Previously used in literature, the number of generations is shown to naturally arise from a normalisation of the scalar transport equation. A self-similar analysis is then further performed using the mole fraction data to explore the evolution of the RMI after reshock and the higher order moments of the light gas mole fraction are compared with a proposed model.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2015

Switchgrass rhizospheres stimulate microbial biomass but deplete microbial necromass in agricultural soils of the upper Midwest, USA

Rhizosphere microbial communities play an essential role in determining plant productivity, particularly in agriculturally marginal environments. Perennial plants like switchgrass (Panicum virgatum) are thought to particularly influence microbial community composition and function within their rhizosphere. We compared microbial communities in switchgrass rhizospheres and their associated bulk soils in two regions of the U.S. upper Midwest (Michigan and Wisconsin) with contrasting soil types, and at two site types with differing switchgrass establishment ages and management intensities. We characterized microbial communities with a range of culture-independent methods, including amplicon sequencing of 16S/18S rRNA and nifH genes, and membrane lipid profiling. In addition, we quantified abundances of soil amino sugars, a time-integrative indicator of microbial necromass. We found that amino sugar contents and microbial lipid profiles differed between rhizosphere and bulk soils, while DNA-based assays did not provide this discriminatory power. Differences between rhizosphere and bulk soils were not significantly affected by region or site type. Rhizosphere soils had higher microbial lipid abundances, particularly those associated with arbuscular mycorrhizal fungi and Gram-negative bacteria, while amino sugar abundances decreased in the rhizosphere. In conclusion, our findings suggest switchgrass rhizospheres systematically stimulate microbial growth and microbial residue turnover.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Life cycle assessment of utilizing freshly cut urban wood: A case study

Large amounts of urban wood resources are generated through tree removals in urban areas. Therefore, there is a growing interest to improve the environmental performance of the urban wood supply chain by quantifying the environmental impacts of creating high-value products from urban tree removals to enhance its utilization. By surveying existing urban wood utilization operations for primary data in two major cities: Baltimore, Maryland, and Milwaukee, Wisconsin, a new life cycle inventory (LCI) dataset per m 3 of dry urban hardwood lumber and live edge slabs was created. Incorporating the new LCI data into life cycle assessment method, the total global warming (GW) impact of converting urban trees to kiln-dried lumber was estimated to be 122 kg CO 2 eq and 336 kg CO 2 eq per m 3 of lumber produced for Baltimore and Milwaukee, respectively. In both cases, the total environmental impact of the product was dominated by the conversion of urban trees to kiln dried lumber at the sawmill processing stage. Using scenario analysis for the source of heat generation used in kiln (force) drying wood, substituting wood fuel from coproducts for natural gas in a boiler for Milwaukee resulted in a substantial reduction in fossil-derived GW impact. Urban and traditional hardwood lumber production follow similar GW impact trajectories over their life-cycle stages with the lumber processing stage having the highest environmental impacts for both. Finally, increasing the overall lumber yield and decreasing kiln (force) drying would substantially improve the environmental performance of urban hardwood lumber and help make it comparable to traditional lumber.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Morphotype-resolved characterization of microalgal communities in a nutrient recovery process with ARTiMiS flow imaging microscopy

Microalgae-driven nutrient recovery represents a promising technology for phosphorus removal from wastewater while simultaneously generating biomass that can be valorized to offset treatment costs. As full-scale processes come online, system parameters including biomass composition must be carefully monitored to optimize performance and prevent culture crashes. In this study, flow imaging microscopy (FIM) was leveraged to characterize microalgal community composition in near real-time at a full-scale municipal wastewater treatment plant (WWTP) in Wisconsin, USA, and population and morphotype dynamics were examined to identify relationships between water chemistry, biomass composition, and system performance. Two FIM technologies, FlowCam and ARTiMiS, were evaluated as monitoring tools. ARTiMiS provided a more accurate estimate of total system biomass, and estimates derived from particle area as a proxy for biovolume yielded better approximations than particle counts. Deep learning classification models trained on annotated image libraries demonstrated equivalent performance between FlowCam and ARTiMiS, and convolutional neural network (CNN) classifiers proved significantly more accurate when compared to feature table-based dense neural network (DNN) models. Across a two-year study period, Scenedesmus spp. appeared most important for phosphorus removal, and were negatively impacted by elevated temperatures and increase in nitrite/nitrate concentrations. Chlorella and Monoraphidium also played an important role in phosphorus removal. For both Scenedesmus and Chlorella, smaller morphological types were more often associated with better system performance, whereas larger morphotypes likely associated with stress response(s) correlated with poor phosphorus recovery rates. Furthermore, these results demonstrate the potential of FIM as a critical technology for high-resolution characterization of industrial microalgal processes.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Simultaneous measurements of kinetic and scalar energy spectrum time evolution in the Richtmyer–Meshkov instability upon reshock

The Richtmyer–Meshkov instability (Richtmyer, Commun. Pure Appl. Maths , vol. 13, issue 2, 1960, pp. 297–319; Meshkov, Fluid Dyn. , vol. 4, issue 5, 1972, pp. 101–104) of a twice-shocked gas interface is studied using both high spatial resolution single-shot (SS) and lower spatial resolution, time-resolved, high-speed (HS) simultaneous planar laser-induced fluorescence and particle image velocimetry in the Wisconsin Shock Tube Laboratory's vertical shock tube. The initial condition (IC) is a shear layer with broadband diffuse perturbations at the interface between a helium–acetone mixture and argon. This IC is accelerated by a shock of nominal strength Mach number $M = 1.75$ , and then accelerated again by the transmitted shock that reflects off the end wall of the tube. An ensemble of experiments is analysed after reshock while the interface mixing width grows linearly with time. The kinetic and scalar energy spectra and the terms of their evolution equation are calculated and compared between SS and HS experiments. The inertial range scaling of the scalar power spectrum is found to follow Gibson's relation (Gibson, Phys. Fluids , vol. 11, issue 11, 1968, pp. 2316–2327) as a function of Schmidt number when the effective turbulent Schmidt number is used in place of the material Schmidt number that controls equilibrium scaling. Further, the spatially integrated scalar flux follows similar behaviour observed for the kinetic energy in large eddy simulation studies by Zeng et al. ( Phys. Fluids , vol. 30, issue 6, 2018, 064106) while the spatially varying scalar flux exhibits back scatter along the centre of the mixing layer and forward energy transfer in the spike and bubble regions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Formation of transient high-β plasmas in a magnetized, weakly collisional regime

We present experimental data providing evidence for the formation of transient (~20 μs) plasmas that are simultaneously weakly magnetized (i.e. Hall magnetization parameter ωτ > 1) and dominated by thermal pressure (i.e. ratio of thermal-to-magnetic pressure β > 1). Particle collisional mean free paths are an appreciable fraction of the overall system size. These plasmas are formed via the head-on merging of two plasmas launched by magnetized coaxial guns. The ratio λ gun = μ 0 I gun /ψ gun of gun current I gun to applied magnetic flux ψ gun is an experimental knob for exploring the parameter space of β and ωτ. These experiments were conducted on the Big Red Ball at the Wisconsin Plasma Physics Laboratory. The transient formation of such plasmas can potentially open up new regimes for the laboratory study of weakly collisional, magnetized, high-β plasma physics; processes relevant to astrophysical objects and phenomena; and novel magnetized plasma targets for magneto-inertial fusion.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2018

Polar Liquid Cloud Base Detection Algorithms for High Spectral Resolution or Micropulse Lidar Data

Liquid layers in clouds affect their microphysical processes, as well as the atmospheric energy budget. However, explicit liquid cloud base height (LCBH) detection algorithms using ground-based instruments (e.g., lidars) are currently absent in the literature. Most studies use either fixed lidar parameter thresholds or cloud base height data products that do not distinguish between ice and liquid, all of which might introduce inconsistencies and errors in the resolved LCBHs. In this paper, two LCBH detection algorithms are presented; the first algorithm uses the high spectral resolution lidar (HSRL) data, and yields satisfactory results. The second algorithm incorporates micropulse lidar (MPL) data for the LCBH detection. A 1-year long comparison of data gathered at Barrow, Alaska, and McMurdo Station, Antarctica, which includes other cloud base detection methodologies (ceilometer, MPL value-added product cloud base height, LCBHs detected using a fixed MPL depolarization threshold) emphasize the merits of the MPL algorithm.

Silber, Israel↗
DOE OSTI2022

Investigating the Impacts of Daytime Boundary Layer Clouds on Surface Energy Fluxes and Boundary Layer Structure During CHEESEHEAD19

Studies of land-atmosphere interactions under a clear sky and low cumulus cloud conditions are common from long-term observatories like at the southern great plains. How well the relationships and responses of surface radiative and turbulent heat fluxes determined from these investigations hold for more heterogeneous surfaces in other climate regimes, however, is uncertain. In this study, detailed observations of the surface energy budget and daytime boundary layer properties are analyzed using measurements from the Chequamegon Heterogenous Ecosystem Energy-Balance Study Enabled by a High-Density Extensive Array of Detectors 2019 (CHEESEHEAD19) field campaign, July-October 2019, across a heterogeneous forested landscape of northern Wisconsin. A cloud regime framework is employed to classify consecutive periods of clear skies from lower atmosphere stratiform and cumulus clouds. A seasonal transition from low cumulus to low stratiform periods occurred, together with a diurnal pattern in cloudy or clear sky period dominance. Radiative forcing was highly dependent on sky conditions, leading to changes in the redistribution efficiency of radiative energy by the surface turbulent heat fluxes. During CHEESEHEAD19, small Bowen ratios dominated with daytime latent heat fluxes three times as large as sensible heat fluxes for all sky conditions studied; the forested region, therefore, falls within an energy-limited regime. The depth of the daytime mixed layer depended upon the sky condition and thermodynamic setting; deeper mixed layers occurred during periods of low cumulus and not clear skies. Profiles of vertical velocity were found to have enhanced variance under low cumulus compared to clear sky periods, suggesting potential for cloud feedbacks on boundary layer structure and surface energy fluxes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Lagged Wetland CH 4 Flux Response in a Historically Wet Year

While a stimulating effect of plant primary productivity on soil carbon dioxide (CO 2 ) emissions has been well documented, links between gross primary productivity (GPP) and wetland methane (CH 4 ) emissions are less well investigated. Determination of the influence of primary productivity on wetland CH 4 emissions (FCH 4 ) is complicated by confounding influences of water table level and temperature on CH 4 production, which also vary seasonally. Here, in this work, we evaluate the link between preceding GPP and subsequent FCH 4 at two fens in Wisconsin using eddy covariance flux towers, Lost Creek (US-Los) and Allequash Creek (US-ALQ). Both wetlands are mosaics of forested and shrub wetlands, with US-Los being larger in scale and having a more open canopy. Co-located sites with multi-year observations of flux, hydrology, and meteorology provide an opportunity to measure and compare lag effects on FCH4 without interference due to differing climate. Daily average FCH4 from US-Los reached a maximum of 47.7 ηmol CH 4 m -2 s -1 during the study period, while US-ALQ was more than double at 117.9 ηmol CH 4 m -2 s -1 . The lagged influence of GPP on temperature-normalized FCH4 (T air -FCH 4 ) was weaker and more delayed in a year with anomalously high precipitation than a following drier year at both sites. FCH 4 at US-ALQ was lower coincident with higher stream discharge in the wet year (2019), potentially due to soil gas flushing during high precipitation events and lower water temperatures. Better understanding of the lagged influence of GPP on FCH 4 due to this study has implications for climate modeling and more accurate carbon budgeting.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Evaporation and Transpiration From Multiple Proximal Forests and Wetlands

Abstract Climate change is intensifying the hydrologic cycle and altering ecosystem function, including water flux to the atmosphere through evapotranspiration (ET). ET is made up of evaporation (E) via non‐stomatal surfaces, and transpiration (T) through plant stomata which are impacted by global changes in different ways. E and T are difficult to measure independently at the ecosystem scale, especially across multiple sites that represent different land use and land management strategies. To address this gap in understanding, we applied flux variance similarity (FVS) to quantify how E and T differ across 13 different ecosystems measured using eddy covariance in a 10 × 10 km area from the CHEESEHEAD19 experiment in northern Wisconsin, USA. The study sites included eight forests with a large deciduous broadleaf component, three evergreen needleleaf forests, and two wetlands. Average T/ET for the study period averaged nearly 52% in forested sites and 45% in wetlands, with larger values after excluding periods following rain events when evaporation from canopy interception may be expected. A dominance analysis revealed that environmental variables explained on average 69% of the variance of half‐hourly T, which decreased from summer to autumn. Deciduous and evergreen forests showed similar E trajectories over time despite differences in vegetation phenology, and vapor pressure deficit explained some 13% of the variance E in wetlands but only 5% or less in forests. Retrieval of E and T within a dense network of flux towers lends confidence that FVS is a promising approach for comparing ecosystem hydrology across multiple sites to improve our process‐based understanding of ecosystem water fluxes.

Environmental Sciences & Ecology↗
DOE OSTI2026

Full-wave simulation of ion cyclotron range of frequency heating in a mirror device

We are adapting the all-orders spectral algorithm (AORSA) [Jaeger Phys. Plasmas 8 (2001)] from tokamak geometry to axisymmetric magnetic mirror geometry. We will use the modified AORSA to study ion cyclotron range of frequency (ICRF) heating in the Wisconsin HTS Axisymmetric Mirror (WHAM) magnetic mirror device [D. Endrizzi J. Plasma Phys. 5 (2023)]. ICRF power will be used in WHAM to accelerate high-energy neutral beam injected deuterium ions with ion cyclotron absorption at the second to fourth harmonics of deuterium. At these harmonics, for the spatial scales present in WHAM, full-wave simulations most accurately capture wave propagation, including transmission, reflection, and absorption at the cyclotron layer. The antenna is modeled as a single strap with m = 0 excitation, where m is the azimuthal mode number. We present some preliminary results for wave coupling and heating.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2019

The dual advanced ion simultaneous implantation experiment (DAISIE) for testing plasma-facing materials

A novel dual ion beam experimental facility, the Dual Advanced Ion Simultaneous Implantation Experiment (DAISIE), has been constructed at the University of Wisconsin-Madison Inertial Electrostatic Confinement laboratory for implanting candidate plasma-facing components of multiple ion species. DAISIE is capable of implanting ions at energies from 10 kV to 50 kV, ion currents of 10 µA–950 µA, corresponding to steady-state ion fluxes of 1 × 10 14 cm –2 s –1 to 1 × 10 16 cm –2 s –1 , incidence angles of 55°, and surface temperatures of at least 1100 °C. Improvements to the sample current and sample temperature measurement and control systems over those used in prior UW-IEC experiments have been made. Likewise, optical measurements of the spot size of the beam on samples in DAISIE are in agreement with existing measurements of the ion beam and spot size in previous UW-IEC experiments. Dual-beam operation has been validated with helium-deuterium ion implantations in tungsten surfaces.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗