Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “WATER PERMEATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Neutronics and activation analysis of lithium-based ternary alloys in IFE blankets

Here we report that an attractive feature of using liquid lithium as the breeder and coolant in fusion blankets is that it has very high tritium solubility and results in very low levels of tritium permeation throughout the facility infrastructure. However, lithium metal vigorously reacts with air and water and presents plant safety concerns. The Lawrence Livermore National Laboratory is carrying an effort to develop a lithium-based alloy that maintains the beneficial properties of lithium (e.g. high tritium breeding and solubility) and at the same time reduces overall flammability concerns. This study evaluates the neutronics performance of lithium-based alloys in the blanket of an inertial fusion energy chamber in order to inform such development. 3-D Monte Carlo calculations were performed to evaluate two main neutronics performance parameters for the blanket: tritium breeding ratio (TBR), and the fusion energy multiplication factor (EMF). It was found that elements that exhibit low absorption cross sections and higher q-values such as lead, tin, and strontium, perform well with those that have high neutron multiplication such as lead and bismuth. These elements meet TBR constrains ranging from 1.02 to 1.1. However, most alloys do not reach EMFs greater than 1.15. Additionally, it was found that enriching lithium significantly increases the TBR and decreases the minimum lithium concentration by more than 60%. The amount of enrichment depends on how much total lithium is in the alloy to begin with. Alloys that performed well in the TBR and EMF calculations were considered for activation analysis. Activation simulations were executed with 50 years of irradiation and 300 years of cooling. It was discovered that bismuth is a poor choice due to achieving the highest decay heat, contact dose rates, and accident doses. In addition, it does not meet the waste disposal ratings (WDR). Some of the activation results for alloys with tin, zinc, and gallium were in the higher end and should be considered secondary to elements such as strontium and barium that had overall better results. The results of this study along with other considerations such as thermodynamics, and chemical reactivity will help down select a preferred lithium ternary alloy.

36 MATERIALS SCIENCE↗

Single-Walled Aluminosilicate Nanotube/Poly(vinyl alcohol) Nanocomposite Membranes

The fabrication, detailed characterization, and molecular transport properties of nanocomposite membranes containing high fractions (up to 40 vol %) of individually-dispersed aluminosilicate single-walled nanotubes (SWNTs) in poly(vinyl alcohol) (PVA), are reported. The microstructure, SWNT dispersion, SWNT dimensions, and intertubular distances within the composite membranes are characterized by scanning and transmission electron microscopy (SEM and TEM), energy-dispersive spectroscopy (EDS), X-ray diffraction (XRD), XRD rocking curve analysis, small-angle X-ray scattering (SAXS), and solid-state NMR. PVA/SWNT nanocomposite membranes prepared from SWNT gels allow uniform dispersion of individual SWNTs in the PVA matrix with a random distribution of orientations. SAXS analysis reveals the length ({approx}500 nm) and outer diameter ({approx}2.2 nm) of the dispersed SWNTs. Electron microscopy indicates good adhesion between the SWNTs and the PVA matrix without the occurrence of defects such as voids and pinholes. The transport properties of the PVA/SWNT membranes are investigated experimentally by ethanol/water mixture pervaporation measurements, computationally by grand canonical Monte Carlo and molecular dynamics, and by a macroscopic transport model for anisotropic permeation through nanotube-polymer composite membranes. The nanocomposite membranes substantially enhance the water throughput with increasing SWNT volume fraction, which leads to a moderate reduction of the water/ethanol selectivity. The model is parameterized purely from molecular simulation data with no fitted parameters, and shows reasonably good agreement with the experimental water permeability data.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Diversity-oriented synthesis of polymer membranes with ion solvation cages

Microporous polymers feature shape-persistent free volume elements (FVEs), which are permeated by small molecules and ions when used as membranes for chemical separations, water purification, fuel cells, and batteries. It remains a significant challenge to identify FVEs with analyte specificity, due to difficulties in generating microporous polymer libraries with sufficient diversity for screening their properties. Here, we describe a diversity-oriented synthetic (DOS) strategy for microporous polymer membranes from which we identified those whose FVEs serve as solid solvation cages for lithium ions (Li + ). Furthermore, key elements of our strategy included diversification of bis(catechol)-type monomers via multi-component Mannich reactions to introduce Li+-coordinating functionality within individual FVEs, topology-enforcing polymerizations for generating macromolecular skeletal diversity for networking FVEs into different pore architectures, and several classes of on-polymer reactions for diversifying pore geometries and dielectric properties. Lead candidate polymer membranes featuring explicit ion solvation cages exhibited both higher ionic conductivity and higher cation transference number than control membranes where FVEs were aspecific, which indicates conventional bounds for membrane permeability and selectivity for ion transport can be overcome.4 These advantages are tied to enhanced Li + partitioning from the electrolyte when the cages are present, higher diffusion barriers for anions within the pores, and network-enforced restrictions on the number of solvent molecules bound to Li+ by comparison to the bulk electrolyte, which reduces the effective mass of the working ion. Such membranes show promise as anode-stabilizing interlayers in high-voltage lithium-metal batteries for electric mobility.

42 ENGINEERING↗

Neutronics Evaluation of Lithium-Based Ternary Alloys in IFE Blankets

Pre-conceptual fusion blanket designs require research and development to reflect important proposed changes in the design of essential systems, and the new challenges they impose on related fuel cycle systems. One attractive feature of using liquid lithium as the breeder and coolant is that it has very high tritium solubility and results in very low levels of tritium permeation throughout the facility infrastructure. However, lithium metal vigorously reacts with air and water and presents plant safety concerns. If the chemical reactivity of lithium could be overcome, the result would have a profound impact on fusion energy and associated safety basis. The overriding goal of this project is to develop a lithium-based alloy that maintains beneficial properties of lithium (e.g. high tritium breeding and solubility) while reducing overall flammability concerns. To minimize the number of alloy combinations that must be explored, only those alloys that meet certain nuclear performance metrics will be considered for subsequent thermodynamic study. The specific scope of this study is to evaluate the neutronics performance of lithium-based alloys in the blanket of an inertial confinement fusion (ICF) engine. The results of this study will inform the development of lithium alloys that would guarantee acceptable neutronics performance while mitigating the chemical reactivity issues of pure lithium.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Hydrogen and Deuterium Reactivity with Carbon Surface Impurities on the TPBAR Getter Ni Plate Studied in situ with Environmental XPS

Tritium for the U.S. Department of Energy’s Tritium Readiness Program is produced in tritium-producing burnable absorber rods (TPBARs) inserted into light-water nuclear reactors. The rods are stainless-steel-clad tubes with a permeation barrier coating and internal components. The internal components have been designed and selected to produce and retain tritium. The TPBAR incorporates a Ni-plated Zircaloy-4 getter tube to capture tritium and prevent it from reaching the rod cladding and permeating into the environment. The role of the Ni coating is to protect the Zircaloy-4 getter from oxidation while allowing for maximum tritium permeability. Ubiquitous surface impurities on the Ni, such as carbon, could limit its protective functionality and permeability if they exist in relatively large concentrations. The reactivity of impurity carbon with permeating tritium can also result in tritiated hydrocarbon impurities on the gas phase. The goal of this work is to determine quantitatively the chemical state and reactivity of potential Ni coating impurities in actual TPBAR getter samples. Using Environmental X-ray Photoelectron Spectroscopy (eXPS), a very sensitive gas/surface chemistry diagnostic, we reveal in situ the source and evolution of carbon on the Ni surface at different hydrogen and deuterium pressure conditions, and how carbon reactivity may result in hydrocarbon gas-evolution at application-relevant temperatures.

36 MATERIALS SCIENCE↗

Utilization of membranes for H2O recycle system

Conceptual studies of closed ecological life support systems (CELSS) carried out at NAL in Japan for a water recycle system using membranes are reviewed. The system will treat water from shower room, urine, impure condensation from gas recycle system, and so on. The H2O recycle system is composed of prefilter, ultrafiltration membrane, reverse osmosis membrane, and distillator. Some results are shown for a bullet train of toilet-flushing water recycle equipment with an ultraviltration membrane module. The constant value of the permeation rate with a 4.7 square meters of module is about 70 1/h after 500th of operation. Thermovaporization with porous polytetrafluorocarbon membrane is also proposed to replce the distillator.

Ohya, H.↗

Diethylenetriamine-functionalized graphene oxide: Insights into ion adsorption and applications in rare earth element separation

The growing demand for critical minerals and materials requires atom- and energy-efficient, selective separations to overcome the challenges posed by the similar chemical and physical properties of the rare earth elements (REEs) and their low concentrations in unconventional domestic feedstocks. Here, in this study, we developed diethylenetriamine-functionalized graphene oxide (DETA-GO) as a membrane material for REE adsorption and separation. Synthesis conditions were optimized to maximize nitrogen incorporation while also preserving GO dispersibility for facile membrane fabrication. We investigated the mechanism of amine functionalization, the nitrogen-bonding configurations, the organization of the interlayer transport channels, and the resulting effects on ion and water transport for REE separations. Neat-GO and DETA-GO multilayer laminate membranes were fabricated by vacuum filtration onto polymer supports. To investigate the effects of amine functionalization, the membranes were characterized using scanning electron microscopy, Raman, Fourier transform infrared, and X-ray photoelectron spectroscopy, as well as grazing-incidence X-ray diffraction measurements. Ion permeation experiments with representative lanthanum (La 3+ ) and ytterbium (Yb 3+ ) solutions revealed enhanced ion adsorption and water transport through DETA-GO membranes compared to neat-GO. The strong affinity of the membranes for multivalent REEs was also validated with conductivity and inductively coupled plasma mass spectrometry measurements. Atomistic insight into the role of amine functionalization in modulating nanochannel architecture and long-term stability, optimizing adsorption sites, and regulating REE and water transport was obtained using classical molecular dynamics simulations. Collectively, our joint experimental and theoretical study demonstrates the potential of DETA-GO membranes for selective REE separations, offering insights into ion-binding mechanisms, water-transport properties, and nanochannel optimization for the recovery of critical materials from aqueous feedstocks.

Adsorbent↗

Corrosion Testing of Brazed Space Station IATCS Materials

Increased nickel concentrations in the IATCS coolant prompted a study of the corrosion rates of nickel-brazed heat exchangers in the system. The testing has shown that corrosion is occurring in a silicon-rich intermetallic phase in the braze filler of coldplates and heat exchangers as the result of a decrease in the coolant pH brought about by cabin carbon dioxide permeation through polymeric flexhoses. Similar corrosion is occurring in the EMU de-ionized water loop. Certain heat exchangers and coldplates have more silicon-rich phase because of their manufacturing method, and those units produce more nickel corrosion product. Silver biocide additions did not induce pitting corrosion at silver precipitate sites.

Pohlman, Matthew J.↗

Solar-thermal membrane for dewatering aqueous organic-acid solutions

A thermally conductive porous membrane has been developed to directly absorb solar energy and conduct heat that can effectively evaporate liquid water at the interface between the membrane and the bulk feed solution. Here, black, porous, thermally conductive graphite foam support is employed as an effective photothermal-energy absorber and heat conductor that heats up an aqueous feed solution to produce vapor. Graphite nanoparticle-slurry coating is applied onto the foam surface to reduce the pore size and generate a microporous membrane. Then, application of a dense graphene oxide membrane coating as an active separation layer on the microporous nanoparticle surface of internal foam channels allows vapor permeation of volatile molecules. Acetic acid/water solution was studied as a model feed system to experimentally demonstrate effective separation. This model vapor permeation system demonstrates excellent acetic acid separation, with a separation factor of 8.3, under simulated 0.7 sun irradiation. The membrane hydrophobicity and nanostructure, including pore size and surface chemistry, played a significant role in enabling high permselectivity of water vapor over acetic acid molecules, as well as liquid solution. Pore size reduction from open pores to a nonporous dense layer in the membrane enables effective separation of water vapor from the organic vapor, while it reduces the permeation flux. Also, the hydrophilicity of the membrane surface shows ~3 times higher permeation flux with higher permselectivity, compared with the hydrophobic membrane surface. This work introduces a process of directly using renewable energy instead of conventional heating to drive selective separation of water from organic acids.

14 SOLAR ENERGY↗

Degradation of different elastomeric polymers in simulated geothermal environments at 300°C

This study evaluates the degradation of six different elastomeric polymers used for O-rings: EPDM, FEPM, type I- and II-FKM, FFKM, and FSR, in five different simulated geothermal environments at 300 °C: 1) non-aerated steam/cooling cycles, 2) aerated steam/cooling cycles, 3) water-based drilling fluid, 4) CO 2 -rich geo-brine fluid, and, 5) heat–cool water quenching cycles. The factors assessed included the extent of oxidation, changes in thermal behavior, micro-defects, permeation of ionic species from the test environments into the O-rings, silicate-related scale-deposition, and changes in the O-rings' elastic modulus. The reliability of the O-rings to maintain their integrity depended on the elastomeric polymer composition and the exposure environment. FSR disintegrated while EPDM was oxidized only to some degree in all the environments, FKM withstood heat-water quenching but underwent chemical degradation, FEPM survived in all the environments with the exception of heat-water quenching where it underwent severe oxidation-induced degradation, and FFKM displayed outstanding compatibility with all the tested environments. This study discusses the degradation mechanisms of the polymers under the aforementioned conditions.

15 GEOTHERMAL ENERGY↗

Radio frequency plasma power dependence of the moisture permeation barrier characteristics of Al{sub 2}O{sub 3} films deposited by remote plasma atomic layer deposition

In the present study, we investigated the gas and moisture permeation barrier properties of Al{sub 2}O{sub 3} films deposited on polyethersulfone films (PES) by capacitively coupled plasma (CCP) type Remote Plasma Atomic Layer Deposition (RPALD) at Radio Frequency (RF) plasma powers ranging from 100 W to 400 W in 100 W increments using Trimethylaluminum [TMA, Al(CH{sub 3}){sub 3}] as the Al source and O{sub 2} plasma as the reactant. To study the gas and moisture permeation barrier properties of 100-nm-thick Al{sub 2}O{sub 3} at various plasma powers, the Water Vapor Transmission Rate (WVTR) was measured using an electrical Ca degradation test. WVTR decreased as plasma power increased with WVTR values for 400 W and 100 W of 2.6 × 10{sup −4} gm{sup −2}day{sup −1} and 1.2 × 10{sup −3} gm{sup −2}day{sup −1}, respectively. The trends for life time, Al-O and O-H bond, density, and stoichiometry were similar to that of WVTR with improvement associated with increasing plasma power. Further, among plasma power ranging from 100 W to 400 W, the highest power of 400 W resulted in the best moisture permeation barrier properties. This result was attributed to differences in volume and amount of ion and radical fluxes, to join the ALD process, generated by O{sub 2} plasma as the plasma power changed during ALD process, which was determined using a plasma diagnosis technique called the Floating Harmonic Method (FHM). Plasma diagnosis by FHM revealed an increase in ion flux with increasing plasma power. With respect to the ALD process, our results indicated that higher plasma power generated increased ion and radical flux compared with lower plasma power. Thus, a higher plasma power provides the best gas and moisture permeation barrier properties.

36 MATERIALS SCIENCE↗

Pre-Combustion Carbon Dioxide Capture by a New Dual Phase Ceramic-Carbonate Membrane Reactor

This report documents synthesis, characterization and carbon dioxide permeation and separation properties of a new group of ceramic-carbonate dual-phase membranes and results of a laboratory study on their application for water gas shift reaction with carbon dioxide separation. A series of ceramic-carbonate dual phase membranes with various oxygen ionic or mixed ionic and electronic conducting metal oxide materials in disk, tube, symmetric, and asymmetric geometric configurations was developed. These membranes, with the thickness of 10 μm to 1.5 mm, show CO 2 permeance in the range of 0.5-5×10 -7 mol·m -2 ·s -1 ·Pa -1 in 500-900°C and measured CO 2 /N 2 selectivity of up to 3000. CO 2 permeation mechanism and factors that affect CO 2 permeation through the dual-phase membranes have been identified. A reliable CO 2 permeation model was developed. A robust method was established for the optimization of the microstructures of ceramic-carbonate membranes. The ceramic-carbonate membranes exhibit high stability for high temperature CO 2 separations and water gas shift reaction. Water gas shift reaction in the dual-phase membrane reactors was studied by both modeling and experiments. It is found that high temperature syngas water gas shift reaction in tubular ceramic-carbonate dual phase membrane reactor is feasible even without catalyst. The membrane reactor exhibits good CO 2 permeation flux, high thermal and chemical stability and high thermal shock resistance. Reaction and separation conditions in the membrane reactor to produce hydrogen of 93% purity and CO 2 stream of >95% purity, with 90% CO 2 capture have been identified. Integration of the ceramic-carbonate dual-phase membrane reactor with IGCC process for carbon dioxide capture was analyzed. A methodology was developed to identify optimum operation conditions for a membrane tube of given dimensions that would treat coal syngas with targeted performance. The calculation results show that the dual-phase membrane reactor could improve IGCC process efficiency but the cost of the membrane reactor with membranes having current CO 2 permeance is high. Further research should be directed towards improving the performance of the membranes and developing cost-effective, scalable methods for fabrication of dual-phase membranes and membrane reactors.

36 MATERIALS SCIENCE↗

Activation behavior for ion permeation in ion-exchange membranes: Role of ion dehydration in selective transport

Here we explored the mechanisms governing the selectivity of anion- and cation-exchange membranes for the transport of four monovalent anions (i.e., fluoride, chloride, bromide, and nitrate) and four monovalent cations (i.e., sodium, potassium, cesium, and ammonium), respectively. Our ion adsorption and transport tests with mixed ion solutions reveal that an ion with larger ionic radius and lower hydration energy is more favorably adsorbed onto the ion-exchange membrane but diffuses more slowly through the polymer matrix compared to an ion with smaller ionic radius and higher hydration energy. Individual anion (as sodium salt) or cation (as chloride salt) permeation tests at different temperatures were performed to evaluate the activation behavior of ion transport through the ion-exchange membranes by calculating the energy barrier and pre-exponential factor (i.e., the ion flux when the energy barrier is negligible) for ion transport from an Arrhenius-type equation. Our results show that an ion with smaller ionic radius and higher hydration energy experiences higher energy barrier (e.g., fluoride, 10.3 kcal mol -1 ) and possesses higher pre-exponential factor compared to an ion with larger ionic radius and lower hydration energy (e.g., bromide, 4.6 kcal mol -1 ). This correlation corroborates our main hypothesis that the activation behavior observed for ion transport is a result of ion dehydration at the water-membrane interface. Our proposed ion selectivity mechanism elucidates how ion dehydration governs the extent of ion permeation into the membrane and the subsequent transport through the charged polymer matrix. Future membrane design that promotes dehydration of target ions is challenging but can result in unprecedented ion selectivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Iron(III) Speciation Observed at Aqueous and Glycerol Surfaces: Vibrational Sum Frequency and X-ray

Aqueous solutions of FeCl 3 have been widely studied to shed light on a number of processes from dissolution, mineralization, biology, electrocatalysis, corrosion, to microbial biomineralization. Yet there are little to no molecular level studies of the air–liquid FeCl 3 interface. Here, both aqueous and glycerol FeCl 3 solution surfaces are investigated with polarized vibrational sum frequency generation (SFG) spectroscopy. We also present the first ever extreme ultraviolet reflection–absorption (XUV-RA) spectroscopy measurements of solvated ions and complexes at a solution interface, and observe with both X-ray photoelectron spectroscopy (XPS) and XUV-RA the existence of Fe(III) at the surface and in the near surface regions of glycerol FeCl 3 solutions, where glycerol is used as a high vacuum compatible proxy for water. XPS showed Cl - and Fe(III) species with significant Fe(III) interfacial enrichment. In aqueous solutions, an electrical double layer (EDL) of Cl - and Fe(III) species at 0.5 m FeCl 3 concentration is observed as evidenced from an enhancement of molecular ordering of water dipoles, consistent with the observed behavior at the glycerol surface. At higher concentrations in water, the EDL appears to be substantially repressed, indicative of further Fe(III) complex enrichment and dominance of a centrosymmetric Fe(III) species that is surface active. In addition, a significant vibrational red-shift of the dangling OH from the water molecules that straddle the air–water interface reveals that the second solvation shell of the surface active Fe(III) complex permeates the topmost layer of the aqueous interface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fundamental Structure/Property Studies of Gas Separation Membrane Polymers

Solution-processable polybenzimidazoles (PBIs) present opportunities for new gas separation membranes. We plan to develop systematic structure/property relations for this relatively new class of membrane materials. The fundamental questions we will address are: (1) How do chemical structure modifications of PBIs influence their gas solubility, diffusivity and permeability properties for a systematic series of gases? (2) Is the separation performance of PBIs affected by plasticization under operating conditions that are relevant to, for example, natural gas purification or olefin/paraffin separation and, if so, can this family of materials be tuned structurally to minimize deleterious effects of plasticization on separation properties? (3) What is the effect of water vapor on PBI separation performance? (4) What is the influence of physical aging on permeation properties of thin (i.e., <1 µm) PBI polymer films, and how does the rate of physical aging relate to polymer chemical structure? The primary focus of this research program is to develop a fundamental, molecular-based mechanistic understanding of the influence of chemical structure on the gas transport properties of PBIs and to establish structure/property relationships for this unique platform of materials.

08 HYDROGEN↗

Coal-Face Fracture With A Two-Phase Liquid

In new method for mining coal without explosive, two-phase liquid such as CO2 and water, injected at high pressure into deeper ends of holes drilled in coal face. Liquid permeates coal seam through existing microfractures; as liquid seeps back toward face, pressure eventually drops below critical value at which dissolved gas flashvaporizes, breaking up coal.

Collins, E. R., Jr.↗

Molecular dynamics study of carbon dioxide and nitrogen selectivity through poly[bis((methoxyethoxy)ethoxy)phosphazene] (MEEP) membrane

Here, a molecular dynamics simulation model was developed to comprehensively understand carbon dioxide over nitrogen (CO 2 /N 2 ) selectivity through polyphosphazene-based membrane comprising of poly[bis((methoxyethoxy)ethoxy)phosphazene] (MEEP) selective layer at the molecular level. The effects of temperature, pressure, and initial feed gas composition on the CO 2 transport on a polymer membrane were studied. The computed free energy and density profile of the permeating gas mixture exhibited that CO 2 molecules express higher interactions with the membrane than N 2 molecules, resulting in higher CO 2 /N 2 selectivity. Statistical analysis of gas molecules (CO 2 , water (H 2 O), and N 2 ) transportation suggested that hydro- and CO 2 -philic functional groups in the membrane significantly impact CO 2 permeability and CO 2 /N 2 selectivity. This study suggested that Lewis acid–base and hydrogen bonding combinations contribute to CO 2 permeation and CO 2 /N 2 selectivity. An equal CO 2 /N 2 selectivity was observed with and without water vapor in the feed gas suggesting that water does not hinder CO 2 transport through the membrane.

36 MATERIALS SCIENCE↗

High-Temperature Ceramic-Carbonate Dual-Phase Membrane Reactor for Pre-combustion Carbon Dioxide Capture (Final Scientific/Technical Report)

Arizona State University, in collaboration with University of South Carolina, worked on a project aimed at development of a new high temperature, high pressure CO 2 perm-selective membrane reactor for water-gas-shift reaction (WGS) with simulated gasifier syngas to produce a high concentration H 2 stream with CO 2 capture. The membrane reactor is made of a CO 2 semi-permeable ceramic-carbonate dual-phase (CCDP) membrane with high CO 2 perm-selectivity/permeance and thermal/mechanical stability for application in WGS reaction. The objectives of this project were to (1) synthesize the chemically/thermally stable tubular CCDP membranes with CO 2 permeance and selectivity (with respect to H 2 , CO or H 2 O) larger than 6.5×10-7 mol/m2·s·Pa and 500, respectively; (2) establish CCDP membrane reactor setup and study high pressure CO 2 permeation and WGS reaction with CO 2 capture using the setup; and (3) identify conditions for WGS in the CCDP membrane reactor that produce CO 2 and H 2 streams with purity of >99% and >90% respectively at CO conversion >95% and overall carbon capture >90%. The work in this project included both membrane development and membrane reactor process study. The membrane development efforts were focused on investigating a H 2 S resistant and highly oxygen-ionic conducting metal oxide material and membrane for CO 2 separation, fabrication of tubular samaria-doped-ceria/molten-carbonate CCDP membrane with high mechanical strength, and experimental and modeling study of high-pressure CO 2 permeation of the CCDP membranes. Mathematical models were developed to describe WGS in the CCDP membrane reactor without a catalyst or packed with a commercial high temperature WGS catalyst. Experiments on WGS in the CCDP membrane reactor with the commercial WGS catalyst, guided by the model analysis, were performed to identify optimum conditions for achieving the CO conversion, carbon capture, and the purity of the H 2 and CO 2 streams mentioned above. At 30 atm feed pressure, 750°C operation temperature, space velocity of 250 h-1, and with steam sweep, a single-stage CCDP membrane reactor with average CO 2 permeation flux of 0.5 cm3(STP)/min.cm2 can achieve CO 2 conversion of 95% and overall carbon capture of 94%, and produce CO 2 and H 2 streams with dry-based purity of >99% and 92% respectively. The project also included process design and techno-economic analysis (TEA) for a CCDP membrane reactor process for WGS reaction with CO 2 capture for a 550 MW coal-fired IGCC power plant, and its comparison with the conventional fixed-bed reactor system for WGS with follow-up CO 2 capture by an amine absorption process. The target performance for the reactor for WGS with CO 2 capture includes CO conversion >95%, hydrogen stream purity >90%, CO 2 stream purity >95%, and total carbon capture >90%. The CCDP membrane developed in this project can achieve the performance target, without subsequent CO 2 capture process at the optimum conditions identified in this project. The outcome of the process design and TEA analysis shows that the membrane reactor for WGS with in-situ CO 2 capture has an operating cost about 40% lower than that for the conventional fixed-bed reactor with a separate amine absorption process for CO 2 capture. However, the capital cost of the membrane reactor process is about twice that of the conventional process because of the higher cost of the CCDP membrane. Modeling analysis shows that a membrane reactor using a CCDP membrane with higher CO 2 permeance (about three times the current value) can deliver the targeted performance for WGS reaction with CO 2 capture at a much higher space velocity and lower membrane surface area to catalyst volume ratio, leading to a smaller catalyst amount and/or membrane area and hence significantly reduced membrane reactor capital costs.

20 FOSSIL-FUELED POWER PLANTS↗