Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “VISCOSITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Bulk viscosity of the rigid rotor one-component plasma

Bulk viscosity of a plasma consisting of strongly coupled diatomic ions is computed using molecular dynamics simulations. The simulations are based on the rigid rotor one-component plasma, which is introduced as a model system that adds two degrees of molecular rotation to the traditional one-component plasma. It is characterized by two parameters: the Coulomb coupling parameter, Γ, and the bond length parameter, Ω. Results show that the long-range nature of the Coulomb potential can lead to long rotational relaxation times, which in turn yield large values for bulk viscosity. Here, the bulk-to-shear viscosity ratio is found to span from small to large values depending on the values of Γ and Ω. Although bulk viscosity is often neglected in plasma modeling, these results motivate that it can be large in molecular plasmas with rotational degrees of freedom.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Viscosity and mutual diffusion of deuterium-tritium mixtures in the warm-dense-matter regime

We have calculated viscosity and mutual diffusion of deuterium-tritium (DT) in the warm, dense matter regime for densities from 5 to 20 g/cm{sup 3} and temperatures from 2 to 10 eV, using both finite-temperature Kohn-Sham density-functional theory molecular dynamics (QMD) and orbital-free molecular dynamics (OFMD). The OFMD simulations are in generally good agreement with the benchmark QMD results, and we conclude that the simpler OFMD method can be used with confidence in this regime. For low temperatures (3 eV and below), one-component plasma (OCP) model simulations for diffusion agree with the QMD and OFMD calculations, but deviate by 30% at 10 eV. In comparison with the QMD and OFMD results, the OCP viscosities are not as good as for diffusion, especially for 5 g/cm{sup 3} where the temperature dependence is significantly different. The QMD and OFMD reduced diffusion and viscosity coefficients are found to depend largely, though not completely, only on the Coulomb coupling parameter {Gamma}, with a minimum in the reduced viscosity at {Gamma}{approx_equal}25, approximately the same position found in the OCP simulations. The QMD and OFMD equations of state (pressure) are also compared with the hydrogen two-component plasma model.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effect of Oil Viscosity and Impact of Ionic Liquid Additive on Electrically Induced Pitting in Rolling Contact

Electrically induced bearing damage (EIBD) is a growing concern in electric drivetrains, where electrical discharge currents generate localized pitting that accelerates wear and premature failure. While ionic liquids (ILs) have shown promise as lubricant additives due to their natural physical adsorption, strong capabilities of tribofilm formation, and high molecular tunability, their role in mitigating EIBD is little known. This gap is especially evident because lubricant viscosity and film thickness affect discharge behavior, and additive performance in these regimes has not been well explored. In this study, tribological tests were performed using a ball-on-disk pure rolling-contact system under an applied voltage on polyalphaolefin oils of three viscosities (4, 10, and 150 cSt measured at 100 °C), with and without the addition of a phosphonium-phosphate IL. Surface damage was analyzed using scanning electron microscopy (SEM) and stylus profilometry. Damage quantification was based on pit morphology analysis of SEM images. The results provide new insights into how oil viscosity governs the discharge behavior and how an IL additive could influence the pit formation. While viscosity seems to play a significant role, an IL additive shows potential to reduce EIBD and deserves further study.

electrically induced bearing damage (EIBD)↗

A Brief Review of Viscosity Models for Slag in Coal Gasification

Many researchers have defined the phenomenon of 'slagging' as the deposition of ash in the radiative section of a boiler, while 'fouling' refers to the deposition of ash in the convective-pass region. Among the important parameters affecting ash deposition that need to be studied are ash chemistry, its transport, deposit growth, and strength development; removability of the ash deposit; heat transfer mechanisms; and the mode of operation for boilers. The heat transfer at the walls of a combustor depends on many parameters including ash deposition. This depends on the processes or parameters controlling the impact efficiency and the sticking efficiency. For a slagging combustor or furnace, however, the temperatures are so high that much of the coal particles are melted and the molten layer, in turn, captures more particles as it flows. The main problems with ash deposition are reduced heat transfer in the boiler and corrosion of the tubes. Common ways of dealing with these issues are soot blowing and wall blowing on a routine basis; however, unexpected or uncontrolled depositions can also complicate the situation, and there are always locations inaccessible to the use of such techniques. Studies have indicated that slag viscosity must be within a certain range of temperatures for tapping and the membrane wall to be accessible, for example, between 1300 C and 1500 C, the viscosity is approximately 25 Pa {center_dot} s. As the operating temperature decreases, the slag cools and solid crystals begin to form. In such cases the slag should be regarded as a non-Newtonian suspension, consisting of liquid silicate and crystals. A better understanding of the rheological properties of the slag, such as yield stress and shear-thinning, are critical in determining the optimum operating conditions. To develop an accurate heat transfer model in any type of coal combustion or gasification process, the heat transfer and to some extent the rheological properties of ash and slag, especially in high-temperature environments need to be understood and properly modeled. The viscosity of slag and the thermal conductivity of ash deposits are among two of the most important constitutive parameters that need to be studied. The accurate formulation or representations of the (transport) properties of coal (and biomass for co-firing cases) present a special challenge of modeling efforts in computational fluid dynamics applications. In this report, we first provide a brief review of the various approaches taken by different researchers in formulating or obtaining a slag viscosity model. In general, these models are based on experiments. Since slag behaves as a non-linear fluid, we discuss the constitutive modeling of slag and the important parameters that must be studied.

01 COAL, LIGNITE, AND PEAT↗

On Artificial Viscosity for Shocks in Porous Materials

The treatment of downstream oscillations in shockwave simulations on discrete grids dates back to the 1940’s with the introduction of an artificial viscosity. These additional term(s) have been successful at suppressing or eliminating oscillations in smooth, well-defined equations of state. This report identifies a shortcoming of several solution methodologies and viscosity formulations that are easily observed when solid equations of state are modified with compaction models or run with a significantly lower density (i.e. ρ < ρ 0 ). The obvious solution is to increase parameter values for the artificial viscosity, but this could lead to deleterious effects in multi-material problems if the viscosity is globally set.

36 MATERIALS SCIENCE↗

Bulk Viscosity of Relativistic npeμ Matter in Neutron-Star Mergers

We discuss the bulk viscosity of hot and dense npeμ matter arising from weak-interaction direct Urca processes. We consider two regimes of interest: (a) the neutrino-transparent regime with T ≤ T tr (T tr ≃ 5 ÷ 10 MeV is the neutrino-trapping temperature); and (b) the neutrino-trapped regime with T ≥ T tr . Nuclear matter is modeled in relativistic density functional approach with density-dependent parametrization DDME2. The maximum of the bulk viscosity is achieved at temperatures T ≃ 5 ÷ 6 MeV in the neutrino-transparent regime, then it drops rapidly at higher temperatures where neutrino-trapping occurs. As an astrophysical application, we estimate the damping timescales of density oscillations by the bulk viscosity in neutron star mergers and find that, e.g., at the oscillation frequency f = 10 kHz, the damping will be very efficient at temperatures 4 ≤ T ≤ 7 MeV where the bulk viscosity might affect the evolution of the post-merger object.

79 ASTRONOMY AND ASTROPHYSICS↗

A framework for developing a mimetic tensor artificial viscosity for Lagrangian hydrocodes on arbitrary polygonal and polyhedral meshes (u)

We construct a new mimetic tensor artificial viscosity on general polygonal and polyhedral meshes. The tensor artificial viscosity is based on a mimetic discretization of coordinate invariant operators, divergence of a tensor and gradient of a vector. The focus of this paper is on the symmetric form, div ({mu},{var_epsilon}(u)), of the tensor artificial viscosity where {var_epsilon}(u) is the symmetrized gradient of u and {mu}, is a tensor. The mimetic discretizations of this operator is derived for the case of a full tensor coefficient {mu}, that may reflect a shock direction. We demonstrate performance of the new viscosity for the Noh implosion, Sedov explosion and Saltzman piston problems in both Cartesian and axisymmetric coordinate systems.

99 GENERAL AND MISCELLANEOUS↗

Thermophysical Properties of Lithium Bromide + 1, 2-Propanediol Aqueous Solutions Solubility, Density and Viscosity

The solubilities, densities and viscosities of lithium bromide (LiBr) + 1, 2-propanediol (HO-CH2-CHOH-CH3) aqueous solution (mass ratio of LiBr/HO-CH2-CHOH-CH3 = 3.5, 4.5 and 5.5) were measured in the mass fraction range from 0.30 to 0.75. Solubility measurements were performed by the visual method in the temperature range of (271.15 to 345.15) K. The density measurements were made using an automated vibrating tube density meter, and the viscosity measurements were carried out with an automated falling-ball viscometer in the temperature range of (293.15 to 363.15) K. The density and viscosity data were correlated with appropriate regression equations as a function of the mass fraction and temperature. The maximum average absolute deviations (AAD) between experimental and correlated data were 0.08% and 1.51% for densities and viscosities, respectively.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

The Effect of Quartz Particle Size and Melt Viscosity on HLW Melter Feed Using Pellet Test Response - 16226

Melter performance is affected by various physical and chemical parameters of the feed. To study the effect of these parameters on waste glass melting efficiency, we monitored the volume expansion of feed pellets in response to heating. This study focuses on the effects of quartz particle size and melt viscosity on a simplified high-alumina high-level waste melter feed labeled A19. In this research the A19 feed was prepared with eight different partitions of quartz particle size ranging from 5 to 250 μm and six modified A19 feeds were formulated to produce melts of viscosities that varied from 1 to 30 Pa s at 1050 deg. C. The volume change of the pellets was monitored with a camera and the volume of pellets was calculated from the profile area of the images. Collected data were then analyzed to characterize the melting behavior of the feed. The low-temperature expansion of the pellet from 400 deg. C to 600 deg. C, a temperature interval at which complex feed reactions occur, was reduced with increasing quartz particle size and viscosity. Foaming occurred from 800 deg. C to 1000 deg. C as the pores were sealed by the connected glass-forming melt. Small sizes of quartz particles caused excessive foaming and earlier onset of foaming, in comparison to larger quartz particle sizes. As is well known, too small or too big quartz particles and high melt viscosity inhibit the rate of melting. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Coumarin-Rhodamine Hybrids—Novel Probes for the Optical Measurement of Viscosity and Polarity

A comprehensive systematic study of absorption and fluorescence properties in solvents of varying viscosity and polarity of three novel and red-emitting coumarin-rhodamine hybrid derivatives with differences in the rigidity of their substituents is presented. This includes ethanol-polyethylene glycol, toluene-polyethylene glycol, and toluene-paraffin mixtures. Moreover, protonation-induced effects on the spectroscopic properties are studied. A viscosity-induced emission enhancement was observed for all coumarin-rhodamine hybrid derivatives. MCR2 bearing a julolidine donor showed the expected low sensitivity to viscosity whereas MCR3 with its freely rotatable diphenylamino substituent revealed a particularly pronounced sensitivity to this parameter. Moreover, MCR2 shows an enhancement in emission in the open, i.e., protonated form in conjunction with a largely Stokes shift fluorescence in the deep red spectral region. This enables the application of these dyes as viscosity sensors and as far red emitting pH-sensitive probes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A space-time smooth artificial viscosity method with wavelet noise indicator and shock collision scheme, Part 2: The 2-D case

This is the second part to our companion paper. Herein, we generalize to two space dimensions the C-method developed in for adding localized, space-time smooth artificial viscosity to nonlinear systems of conservation laws that propagate shock waves, rarefaction waves, and contact discontinuities. For gas dynamics, the C-method couples the Euler equations to scalar reaction-diffusion equations, which we call C-equations, whose solutions serve as space-time smooth artificial viscosity indicators for shocks and contacts. We develop a high-order numerical algorithm for gas dynamics in 2-D which can accurately simulate the Rayleigh-Taylor (RT) instability with Kelvin-Helmholtz (KH) roll-up of the contact discontinuity, as well as shock collision and bounce-back. Solutions to our C-equations not only indicate the location of the shocks and contacts, but also track the geometry of the evolving fronts. This allows us to implement both directionally isotropic and anisotropic artificial viscosity schemes, the latter adding diffusion only in directions tangential to the evolving front. We additionally produce a novel shock collision indicator function, which naturally activates during shock collision, and then smoothly deactivates. Moreover, we implement a high-frequency 2-D wavelet-based noise detector together with an efficient and localized noise removal algorithm. To test the methodology, we use a highly simplified WENO-based discretization scheme. We provide numerical results for some classical 2-D test problems, including the RT problem, the Noh problem, a circular explosion problem from the Liska & Wendroff [13] review paper, the Sedov blast wave problem, the double Mach 10 reflection test, and a shock-wall collision problem. In particular, we show that our artificial viscosity method can eliminate the wall-heating phenomenon for the Noh problem, and thereby produce an accurate, non-oscillatory solution, even though our simplified WENO-type scheme fails to run for this problem.

97 MATHEMATICS AND COMPUTING↗

Sensitivity of pore collapse heating to the melting temperature and shear viscosity of HMX

A multiscale modeling strategy is used to quantify factors governing the temperature rise in hot spots formed by pore collapse from supported and unsupported shock waves in the high explosive HMX (octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine). Two physical aspects are examined in detail, namely the melting temperature and liquid shear viscosity. All-atom molecular dynamics simulations of phase coexistence are used to predict the pressure-dependent melting temperature up to 5 GPa. Equilibrium simulations and the Green–Kubo formalism are used to obtain the temperature- and pressure-dependent liquid shear viscosity. Starting from a simplified continuum-based grain-scale model of HMX, in this study we systematically increase the complexity of treatments for the solid–liquid phase transition and liquid shear viscosity in simulations of pore collapse. Using a realistic pressure-dependent melting temperature completely suppresses melting for supported shocks, which is otherwise predicted when treating it as a constant determined at atmospheric pressure. Alternatively, melt pools form around collapsed pores when the pressure (and melting temperature) are reduced during the release stage of unsupported shocks. Capturing the pressure dependence of the shear viscosity increases the peak temperature of melt pools by hundreds of Kelvin through viscous work. The complicated interplay of the solid-phase plastic work, solid–liquid phase transition, and liquid-phase viscous work identified here motivate taking a systematic approach to building increasingly complex grain-scale models.

36 MATERIALS SCIENCE↗

Toward comprehensive studies of liquids at high pressures and high temperatures: Combined structure, elastic wave velocity, and viscosity measurements in the Paris-Edinburgh cell

Techniques for measuring liquid structure, elastic wave velocity, and viscosity under high pressure have been integrated using a Paris–Edinburgh cell at Beamline 16-BM-B, HPCAT of the Advanced Photon Source. The Paris–Edinburgh press allows for compressing large volume samples (up to 2 mm in both diameter and length) up to ~7 GPa and 2000 °C. Multi-angle energy dispersive X-ray diffraction provides structure factors of liquid to a large Q of ~19 Å. Ultrasonic techniques have been developed to investigate elastic wave velocity of liquids combined with the X-ray imaging. Falling sphere viscometry, using high-speed X-ray radiography (>1000 frames/s), enables us to investigate a wide range of viscosity, from those of high viscosity silicates or oxides melts to low viscosity (<1 mPa s) liquids and fluids such as liquid metals or salts. The integration of these multiple techniques has promoted comprehensive studies of structure and physical properties of liquids as well as amorphous materials at high pressures and high temperatures, making it possible to investigate correlations between structure and physical properties of liquids in situ.

Kono, Yoshio↗

Correlating viscosity and die swell in 3D printing of polyphenylsulfone: A thermo-mechanical optimization modus operandi

Additive manufacturing (AM) of polyphenylsulfone (PPSU), an amorphous high-performance polymer (HPP), has shown promise in exhibiting structural integrity for many applications. With thermoplastic material extrusion 3D printing, parts consisting of layered melts exhibited voids, where the adhesion quality and void size depend on the processing parameters implemented during printing. However, the structure-process-property (SPP) relationships between the thermal properties and rheological and mechanical behavior of AM PPSU are poorly understood. Here, in this study, a comprehensive analysis of the thermal, thermo-mechanical, and layer-by-layer build-up of PPSU is investigated and correlated with viscosity and extrudate die swell behavior with void fraction volume as confirmed by high-resolution x-ray computed tomography (XCT). Gas chromatography–mass spectrometry (GC–MS) pyrolysis confirmed PPSU composition and degradation at 480 °C, consistent with thermo-gravimetric analysis TGA. A 141% difference in viscosity was observed when processing temperatures increased from 350 °C to 400 °C. Likewise, extrudate die swell decreased with increasing temperatures, resulting in a 17% difference. Tensile and compressive properties confirmed that higher extruding temperatures resulted in lower porosity and higher mechanical strength. In general, higher extruding temperatures lower the viscosity to allow for stronger cohesion between layers; however, increasing the temperature too high results in a below unity extrudate die swell, reducing mechanical properties. Therefore, to optimize the mechanical integrity of 3D printed amorphous PPSU parts, an increase in the viscosity, near unity of the extrudate die swell, and tempered extrusion temperature are needed.

36 MATERIALS SCIENCE↗

Odd-viscosity-induced stabilization of viscous thin liquid films

Thin viscous liquid films sitting on a solid substrate support nonlinear capillary waves, driven by surface shear stresses at a liquid–gas interface. When surface tension is spatially dependent other mechanisms, such as the thermocapillary effect, influence the dynamics of thin films. In this article we show that in liquids with broken time-reversal symmetry the character of the aforementioned waves and of the thermocapillary effect are significantly modified due to the presence of odd or Hall viscosity in the liquid. This is because odd viscosity gives rise to new terms in the pressure gradient of the flow thus modifying the evolution equation of the liquid–gas interface accordingly. These terms in turn break the reflection symmetry of the evolution equation leading the system to evolve from a pitchfork to a Hopf bifurcation. The odd-viscosity incipient waves can stabilize unstable thin liquid films. For instance, we show that they can suppress the thermocapillary instability. We establish the parameter ranges that odd viscosity has to satisfy in order to initiate those waves that will lead to stability.

Mechanics↗

Odd-viscosity-induced passivation of Moffatt vortices

Odd viscosity is associated with a number of striking physical phenomena: a disk rotating in a viscous liquid experiences a normal compressive or tensile stress depending on its sense of rotation; chiral active matter interfacial deformations level off in a manner akin to surface tension; and unstable thermocapillary films become stabilized. In this article we show that odd viscosity decreases the size and intensity of Moffatt vortices in a corner formed by a solid substrate and a free interface. The effect is present because odd viscosity creates a normal-stress-induced shear stress at the liquid–gas interface. The new shear stress is out of phase and oppositely directed with respect to the interfacial liquid velocity. It squeezes the vortices and damps their rotation. As a consequence, Moffatt vortices can now be observed with greater facility in an experiment. Odd viscosity also increases the range of corner angles over which Moffatt vortices can be observed, and, in general, it shows a tendency to moderate singular behaviour.

Mechanics↗

In Pursuit of a High-Temperature, High-Pressure, High-Viscosity Standard: The Case of Tris(2-ethylhexyl) Trimellitate

This study presents a reference correlation for the viscosity of tris(2-ethylhexyl) trimellitate designed to serve in industrial applications for the calibration of viscometers at elevated temperatures and pressures such as those encountered in the exploration of oil reservoirs and in lubrication. Tris(2-ethylhexyl) trimellitate has been examined with respect to the criteria necessary for an industrial standard reference material such as toxicity, thermal stability, and variability among manufactured lots. The viscosity correlation has been based upon all of the data collected in a multinational project and is supported by careful measurements and analysis of all the supporting thermophysical property data that are needed to apply the standard for calibration to a wide variety of viscometers. The standard reference viscosity data cover temperatures from 303 to 473 K, pressures from 0.1 to 200 MPa, and viscosities from approximately 1.6 to 755 mPa s. The uncertainty in the data provided is of the order of 3.2% at 95% confidence level, which is thought to be adequate for most industrial applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Molecular Simulations of CO 2 and H 2 Solubility, CO 2 Diffusivity, and Solvent Viscosity at 298 K for 27 Commercially Available Physical Solvents

CO 2 and H 2 solubilities, CO 2 /H 2 solubility selectivities, CO 2 diffusivities, and solvent viscosities in 27 commercially available physical solvents at 298 K were calculated from molecular simulations using the CHARMM36 all-atom force field for most solvents, and the simulation results were compared with available experimental data in this report. The van der Waals radius parameters for solvents were slightly tuned to reproduce the experimental solvent density. The simulated CO 2 solubilities are comparable with the experimental data, with an average absolute difference of 28%. For the homologous compounds containing the –(OCH 2 CH 2 )– repeat unit, both simulated and experimental data show that CO 2 solubility decreases when the number of repeat units is increased; CO 2 solubilities in these homologous compounds exhibit almost a perfect positive linear correlation with the solvent free-volume fractions. The simulated H 2 solubilities and CO 2 /H 2 solubility selectivities are also comparable with the experimental data, with differences of 22% and 17%, respectively. The H 2 solubilities in all solvents researched here correlate very well with the solvent free-volume fractions, exhibiting a positive linear correlation coefficient of 0.84. Additionally, simulations show that CO 2 solubility decreases when the temperature is increased. In contrast, H 2 solubility increases at elevated temperature, which is partly due to the increased solvent free-volume fraction at elevated temperature. Lastly, although the viscosity difference tends to be large (30%–246%) between simulation and experiment, both simulated and experimental data exhibit a similar solvent viscosity trend. Furthermore, simulations show that CO 2 diffusivities in solvents are very strongly correlated with the solvent viscosities and the relationship between them is given by D$_{CO_{2}}$ = (2.6 ± 0.3) × 10 –9 /η solvent 0.59 ± 0.03.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗