Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “VIDEO TAPES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Multispectral facsimile reproducer

Facsimile reproducer records spatially well-registered true-color and false-color video data on tape. Proposed optical arrangement allows light sources to be adjusted along the mirror scanning direction in such a manner that no electronic delays are required if the reproducer is operated synchronously with the camera.

Burcher, E. E.↗

Improved Quick Disconnect (QD) Interface Through Fail Safe Parts Identification

An extensive review of existing Quick Disconnects (QDs) mating and demating operations was performed to determine which shuttle part interface identifications and procedures contribute to human factor errors. The research methods used consisted of interviews with engineers and technicians, examination of incident reports, critiques of video and audio tapes of QD operations, and attendance of a Hyper QD operational course. The data strongly suggests that there are inherit human factor errors involved in QD operations. To promote fail-safe operations, QD interface problem areas and recommendations were outlined and reviewed. It is suggested that dialogue, investigations and recommendations continue.

Blanch-Payne, Evelyn↗

Study and simulation of spatial video compression for remotely piloted vehicles

Techniques of video compression applicable to remotely piloted vehicles (RPVs) are investigated. One approach is to reduce the frame rate, the other is to reduce the number of bits per sample needed to represent static picture detail by means of digital video compression. Hadamard transforms of 8 x 8 subpictures, with adaptive and nonadaptive quantization of transform coefficients, were investigated for the latter technique. Tapes of typical RPV video, processed by Aeronautronic Ford to simulate four frame rates, were again processed by the Ames real-time video system to obtain a variety of compressions of each of the four frame rates.

Knauer, S.↗

STS-102 Mission Highlight Resource Tape, Tape 1 of 4

This video gives an overview of the first four flight days of the STS-102 mission through a compilation of footage from each day. The crew of STS-102 (Commander James Wetherbee, Pilot James Kelly, and Mission Specialists Andrew Thomas and Paul Richards) and the Expedition 2 crew (Commander Yuriy Usachev and Flight Engineers James Voss and Susan Helms) are seen during the ceremonial breakfast, suitup, and as they board Discovery. The orbiter's launch is seen from several different viewpoints, and various in-flight activities are shown, such as the opening of Discovery's payload bay doors, Helms preparing for the 'H-Reflex Experiment: Effects of Microgravity on the Spine', the rendezvous and docking of Discovery with the International Space Station (ISS), and Helms and Voss preparing for and performing their spacewalks. The crew of STS-102 and both Expedition crews (E1 crew William Shepherd, Yuri Gidzenko, and Sergei Krikalev) are seen in the Destiny Laboratory Module. Activities for flight day five can be seen on 'STS-102 Mission Highlight Resource Tape, Part 1 of 2, Tape 2 of 2' (internal ID 2001096941). Flight days 6-14 activities can be seen on 'STS-102 Mission Highlight Resource Tape, Part 2 of 2, Tape 1 of 2' (internal ID 2001096943) and 'STS-102 Mission Highlight Resource Tape, Part 2 of 2, Tape 2 of 2' (internal ID 2001096940).

Source record↗

STS-113 Mission Highlights Resource Tape Flight Days 4-6 Tape: 2 of 4

This video, Part 2 of 4, shows the activities of the crew of the Space Shuttle Endeavor on flight days 4-6 of STS-113. The crew consists of Commander Jim Wetherbee, Pilot Paul Lockhart, and Mission Specialists Michael Lopez-Alegria and John Herrington. On flight day 4, The P1 truss was transfered from Canadarm on Endeavour to Canadarm 2 on the ISS, and aligned with the S0 Truss for attachment. The mission specialists connected utility cables between the trusses on an extravehicular activity (EVA). Flight day 5 was Commander Wetherbee's 50th birthday, and the video includes a clip from The Tonight Show in which Jay Leno wishes him a happy birthday. Intravehicular activity on flight day 5 includes Peggy Whitsun of the outgoing Expedition 5 crew of the International Space Station (ISS) showing incoming Expedition 6 crew members Ken Bowersox and Don Pettit how to replace valves on the ISS CO2 removal system. The video also includes an interior tour of Endeavour and the ISS, and an brief exterior tour of the ISS. On flight day 6 Lopez-Alegria and Herrington attach a television antenna to the P1 truss, and are shown using a handcart on the truss several times. The video includes several Earth views, including one of the west coast of South America.

Source record↗

STS-113 Mission Highlights Resource Tape Flight Days 1-3. Tape: 1 of 4

This video, part 1 of 4, shows the activities of the crew of Space Shuttle Endeavour during flight days 1-3 of STS-113. The crew consists of Commander Jim Wetherbee, Pilot Paul Lockhart, Mission Specialists Michael Lopez-Alegria and John Herrington. With them were the Expedition 6 crewmembers of the International Space Station (ISS), Ken Bowersox, Nikolai Budarin, and Don Pettit. Pre-launch procedures are shown, and the rain-delayed night launch is shown from several camera angles. On flight day 2 there was a check out of the Canadarm on Endeavour, and some intravehicular activity. Flight day 3 highlights the docking of Endeavour and the ISS, and preparation for an extravehicular activity (EVA) the following day. Earth views include the English Channel at night with a close-up of London, the coast of Ecuador, and some views of Endeavour with the Earth in the background.

Source record↗

STS-113 Mission Highlights Resource Tape Flight Days 7-11. Tape: 3 of 4

This video, part 3 of 4, shows the activities of the crew of Space Shuttle Envdeavour and the Expedition 5 and 6 crews of the International Space Station (ISS) during flight days 7 through 11 of STS-113. Endeavour's crew consists of Commander Jim Wetherbee, Pilot Paul Lockhart, and Mission Specialists Michael Lopez-Alegria and John Herrington. Footage of flight day 7 includes a change of command ceremony on board the ISS, and Endeavour dumping supply water through a nozzle. On flight day 8 the Space Station Mobile Transporter jams while traveling on the P1 truss of the ISS, and Herrington attempts to free it as part of a lengthy extravehicular activity (EVA) with Lopez-Alegria. Flight day 9 is the last full day the three crews spend together. Expedition 5 NASA ISS Science Officer Peggy Whitsun troubleshoots the Microgravity Glovebox on board the ISS with her successor Don Pettit. The undocking of Endeavour and the ISS is the main activity of flight day 10. Endeavour also deploys a pair of experimental tethered microsatellites for the Department of Defense. The footage from flight day 11 shows the Expedition 5 crew exercising, laying in recumbant seats to help them adjust to the gravity on Earth, and sleeping. The video includes numerous views of the earth, some with the ISS and Endeavour in the foreground. There are close-ups of Italy, Spain and Portugal, Tierra del Fuego, and Baja California, and a night view of Chicago and the Great Lakes.

Source record↗

STS-104 Mission Highlights Resource Tape

A continuation of 'STS-104 Mission Highlights Resource Tape, Part 1 of 4' (internal ID 2001214904), this video shows footage from flight days four through seven of the STS-104 mission. Mission Specialists Mike Gernhardt and Jim Reilly are seen during their spacewalks, Pilot Charles Hobaugh and Mission Specialists Janet Kavandi, Mike Gernhardt, and Jim Reilly, and Expedition 2 Flight Engineer Susan Helms work inside the newly installed Quest Airlock. Expedition 2 Flight Engineer Jim Voss is seen as he works to outfit the vestibule between the Unity Module and Quest and opening the hatch between the two components of the International Space Station. Flight days seven (continued) though twelve can be found on the videos 'STS-104 Mission Highlights Resource Tape, Part 3 of 4' (internal ID 2001214906) and 'STS-104 Mission Highlights Resource Tape, Part 4 of 4' (internal ID 2001214905).

Source record↗

Helical scan recording with a self-acting negative air bearing

A flat head and a tape transport arrangement impart a wrap angle to the tape at the upstream corner of the head. The wrap angle, corner sharpness and tape stiffness are sufficient to cause a moving tape to form a hollow bump at the upstream corner, thereby creating a hollow into which entrained air can expand, causing a subambient pressure within and downstream of the bump. This pressure keeps the tape in contact with the head. It is created without the need for a groove or complex pressure relief slot(s). No contact pressure arises at the signal exchange site due to media wrap. The highest contact pressures are developed at a wrapped upstream corner. For a tape drive, traveling in both forward and reverse, the wrap can be at both the upstream and downstream (which is the reverse upstream) corners. Heads that are not flat can also be used, if the wrap angle relative to a main surface is sufficient and not too large. The wrapped head can also be used with rotating media, such as disks (floppy and hard) and rotating heads, such as helical wound heads for video recording. Multiple flat tape bearing surfaces can be separated by grooves and/or angles. Each flat can carry heads along one or more gap lines. Multiple adjacent narrow tracks can thus be written for extreme high track density recording.

Muftu , Sinan↗

Contact sheet recording with a self-acting negative air bearing

A flat head and a tape transport arrangement impart a wrap angle to the tape at the upstream corner of the head. The wrap angle, corner sharpness and tape stiffness are sufficient to cause a moving tape to form a hollow bump at the upstream corner, thereby creating a hollow into which entrained air can expand, causing a subambient pressure within and downstream of the bump. This pressure keeps the tape in contact with the head. It is created without the need for a groove or complex pressure relief slot(s). No contact pressure arises at the signal exchange site due to media wrap. The highest contact pressures are developed at a wrapped upstream corner. For a tape drive, traveling in both forward and reverse, the wrap can be at both the upstream and downstream (which is the reverse upstream) corners. Heads that are not flat can also be used, if the wrap angle relative to a main surface is sufficient and not too large. The wrapped head can also be used with rotating media, such as disks (floppy and hard) and rotating heads, such as helical wound heads for video recording. Multiple flat tape bearing surfaces can be separated by grooves and/or angles. Each flat can carry heads along one or more gap lines. Multiple adjacent narrow tracks can thus be written for extreme high track density recording.

Muftu , Sinan↗

Susceptibility Study of Audio Recording Devices to Electromagnetic Stimulations

Little research has been performed to study how intentional electromagnetic signals may couple into recording devices. An electromagnetic susceptibility study was performed on an analog tape recorder, a digital video camera, a wired computer microphone, and a wireless microphone system to electromagnetic interference. Devices were subjected to electromagnetic stimulations in the frequency range of 1-990 MHz and field strengths up to 4.9 V/m. Carrier and message frequencies of the stimulation signals were swept, and the impacts of device orientation and antenna polarization were explored. Message signals coupled into all devices only when amplitude modulated signals were used as stimulation signals. Test conditions that produced maximum sensitivity were highly specific to each device. Only narrow carrier frequency ranges could be used for most devices to couple messages into recordings. A basic detection technique using cross-correlation demonstrated the need for messages to be as long as possible to maximize message detection and minimize detection error. Analysis suggests that detectable signals could be coupled to these recording devices under realistic ambient conditions.

42 ENGINEERING↗

Data reformatting with less hardware

Dual-function integrated circuits use one shift register array instead of two to feed video data to seven tape channels thereby making system more reliable and less expensive than predecessor. Basic principle of reformatter is also applicable to multiplexing and frequency conversion circuits.

Engel, A.↗

On-Orbit Testing of Materials and Processes

The Pore Formation and Mobility Investigation (PFMI) and the In-Space Soldering Investigation (ISSI) were conducted aboard the International Space Station (ISS) with the intent of promoting our understanding of materials processing in a low-gravity environment. The numerous experiments were conducted by telescience with the results evaluated by real time video and subsequently returned tapes and samples. In addition to discussing the experimental results and analysis the presentation will include an account of the ISS facilities (Microgravity Science Glovebox and Maintenance Work Area) used as well as some lessons-learned comments.

Grugel, R. N.↗

STS-112 Mission Highlights Resource Tape, Part 1 of 3

This video, Part 1 of 3, shows the activities of the STS-112 crew on flight days 1 - 3. The crew included Commander Jeff Ashby, Pilot Pam Melroy, and Mission Specialists Sandy Magnus, David Wolf, Piers Sellers, and Fyodor Yurchikhin. Flight day 1 begins with an introduction of the astronauts, seen during their pre-flight banquet, and suit-up. The ingress of some of the crew into the Space Shuttle Atlantis is shown. The launch footage includes the view from a camera mounted on the shuttle's external fuel tank, as well as replays. The separation of the shuttle's booster rockets is also shown. On flight day 2 a view of the payload bay and orbiter docking mechanism on Atlantis is shown from a camera on the shuttle's robotic arm. The footage of flight day 3 includes the docking of Atlantis and the International Space Station (ISS), and the exchange of greetings between the two spacecrews. Views of Earth include a pass over the western United States on flight day 2, and a night view of China on flight day 3.

Source record↗

STS-113 Mission Highlights Resource Tape Flight Days 12-15. Tape: 4 of 4

This short video, Part 4 of 4, shows the activities of the crew of Space Shuttle Endeavour and the Expedition 5 crew of the International Space Station (ISS) on the final day of STS-113. The shuttle's crew consists of Commander Jim Wetherbee, Pilot Paul Lockhart, and Mission Specialists Michael Lopez-Alegria and John Herrington, together with the Expedition 5 crew, Commander Valery Korzun, Flight Engineer Sergei Treschev, and NASA ISS Science Officer Peggy Whitson. Onboard video is not available for flight days 12 through 14, but footage of flight day 15 includes suiting up into flight suits, reentry and landing from different angles, including Pilot Point of View (PPOV), and replays of landing.

Source record↗

STS-107 Mission Highlights Resource Tape, Part 1 of 4

This video, Part 1 of 4, shows the activities of the STS-107 crew during flight days 1 through 3 of the Columbia orbiter's final flight. The crew consists of Commander Rick Husband, Pilot William McCool, Payload Commander Michael Anderson, Mission Specialists David Brown, Kalpana Chawla, and Laurel Clark, and Payload Specialist Ilan Ramon. Before launch on flight day 1 the astronauts are seen at their pre-flight banquet, during suit-up, and while being seated on the orbiter. David Brown takes footage of the space shuttle's external tank after it is jettisoned. The video includes replays of the launch from several angles. The onboard views of launch are narrated by William McCool and Kalpana Chawla. On flight days 2 and 3 student microgravity experiments in the SpaceHab module in the shuttle's payload bay are profiled. These experiments address microgravity effects on crystal growth, ants, bees, fish embryos, silkworms, and spiders. Other experiments profiled include the Mediterranean Israeli Dust Experiment (MEIDEX), FAST (surface tension of bubbles), SOLS (Ozone), an experiment to culture prostate cancer cells in a bioreactor, and a commercial plant growth experiment. Earth views include lightning at night, and a view of the Strait of Gibraltar, including Spain and Morocco.

Source record↗

STS-88 Mission Highlights Resources Tape

The STS-88 flight crew, Commander Robert D. Cabana, Pilot Frederick W. Sturckow, and Mission Specialists Nancy J. Currie, James H. Newman, Jerry L. Ross, and Sergei Krikalev present a video overview of their space flight. Tape two of three includes the installation of an S-Band to help monitor the UNITY Connecting Module, the opening of UNITY's hatch, the opening of the main compartment hatch to ZARYA Control Module, and the repair of the inflight maintenance system.

Source record↗