Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Touch”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2016

Digestive Tract Complications of Renal Cryoablation

We report a case each of duodenorenal and colorenal fistula that arose after computed tomography-guided percutaneous cryoablation (PCA) for renal cell carcinoma and use imaging and endoscopic findings to analyze their causes and mechanisms. Both complications occurred though the edge of the iceball did not touch the intestinal wall, and patients’ symptoms and fistula formation occurred several days after the PCA procedure. Based on imaging and endoscopy findings, we suspected the colorenal fistula resulted from bowel injury caused by ischemia from the occlusion of small vessels at the procedure’s low temperature. Both cases were resolved conservatively without surgical intervention.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2018

Heat Emission and Temperature Non-uniformity in Rod Bundles with Different Spacing, Cooled by Heavy Liquid-Metal Coolant

Heat emission and temperature non-uniformity along the perimeter of rods in free lattices of fuel elements with heavy liquid-metal coolant are studied. The experimental data for an assembly of smooth rods, assemblies of fuel elements with spiral ribbing, and transverse lattices are analyzed. The studies show that there is almost no temperature non-uniformity in a lattice of smooth fuel elements along its perimeter, which is in contrast to the high general azimuthal temperature non-uniformity in an assembly with spacing by spiral coils. Rib spacing resulted in significant reduction of heat emission. In an assembly with transverse spacer lattices, the heat emission increases only in the region containing the lattices; in the spaces between lattices, it is approximately equal to the heat emission in a bundle with smooth fuel elements. Inside a spacer lattice, periodic temperature non-uniformities appear along the perimeter of the fuel elements; these non-uniformities are due to the fuel elements touching the elements of the lattice. A relation is recommended for calculating heat emission (Nusselt numbers) and temperature non-uniformity along the perimeter of the fuel elements for the studied methods of spacing the fuel elements.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2018

Ferromagnetism in the Hubbard Model with a Gapless Nearly-Flat Band

We present a version of the Hubbard model with a gapless nearly-flat lowest band which exhibits ferromagnetism in two or more dimensions. The model is defined on a lattice obtained by placing a site on each edge of the hypercubic lattice, and electron hopping is assumed to be only between nearest and next nearest neighbor sites. The lattice, where all the sites are identical, is simple, and the corresponding single-electron band structure, where two cosine-type bands touch without an energy gap, is also simple. We prove that the ground state of the model is unique and ferromagnetic at half-filling of the lower band, if the lower band is nearly flat and the strength of on-site repulsion is larger than a certain value which is independent of the lattice size. This is the first example of ferromagnetism in three dimensional non-singular models with a gapless band structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2016

Traveling waves for the mass in mass model of granular chains

In this work, we consider the mass in mass (or mass with mass) system of granular chains, namely, a granular chain involving additionally an internal (or, respectively, external) resonator. For these chains, we rigorously establish that under suitable “anti-resonance” conditions connecting the mass of the resonator and the speed of the wave, bell-shaped traveling-wave solutions continue to exist in the system, in a way reminiscent of the results proven for the standard granular chain of elastic Hertzian contacts. Finally, we also numerically touch upon settings, where the conditions do not hold, illustrating, in line also with recent experimental work, that non-monotonic waves bearing non-vanishing tails may exist in the latter case.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Interaction Between Graphene-Coated SiC Single Crystal and Liquid Copper

The wettability of graphene-coated SiC single crystal (C{sub Gn}/SiC{sup sc}) by liquid Cu (99.99%) was investigated by a sessile drop method in vacuum conditions at temperature of 1100 °C. The graphene layer was produced via a chemical vapor deposition routine using 4H-SiC single crystal cut out from 6″ wafer. A dispensed drop technique combined with a non-contact heating of a couple of materials was applied. The Cu drop was squeezed from a graphite capillary and deposited on the substrate directly in a vacuum chamber. The first Cu drop did not wet the C{sub Gn}/SiC{sup sc} substrate and showed a lack of adhesion to the substrate: the falling Cu drop only touched the substrate forming a contact angle of θ{sub 0} = 121° and then immediately rolled like a ball along the substrate surface. After settling near the edge of the substrate in about 0.15 s, the Cu drop formed an asymmetric shape with the right and left contact angles of different values (θ{sub R} = 86° and θ{sub L} = 70°, respectively), while in the next 30 min, θ{sub R} and θ{sub L} achieved the same final value of ~ 52°. The second Cu drop was put down on the displacement path of the first drop, and immediately after the deposition, it also did not wet the substrate (θ = 123°). This drop kept symmetry and the primary position, but its wetting behavior was unusual: both θ{sub R} and θ{sub L} decreased in 17 min to the value of 23° and next, they increased to a final value of 65°. Visual observations revealed a presence of ~ 2.5-mm-thick interfacial phase layer reactively formed under the second drop. Scanning electron microscopy (SEM) investigations revealed the presence of carbon-enriched precipitates on the top surface of the first Cu drop. These precipitates were identified by the Raman spectroscopy as double-layer graphene. The Raman spectrum taken from the substrate far from the drop revealed the presence of graphene, while that obtained from the first drop displacement path exhibited a decreased intensity of 2D peak. The results of SEM investigations and Raman spectroscopy studies suggest that the presence of graphene layer on the SiC substrate suppresses but does not completely prevent chemical interaction between liquid Cu drop and SiC. Both chemical degradation (etching) and mechanical degradation of the graphene layer during drop rolling due to high adhesion of the Cu drop to the SiC substrate are responsible for mass transfer through the 2nd drop/substrate interface that in turn results in significant changes of structure and chemistry of the drop and the interface.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2025

The Ductility of 49Fe-49Co-2V Soft Magnetic Alloy Bar: Surface Effects and Test Methods

The tensile ductility of 49Fe-49Co-2V (Hiperco® 50A) bar was investigated in both as-received and heat-treated conditions. The as-received/machined specimens exhibit very low ductility compared to samples where heat treatment was the final step prior to testing. Microstructural characterization showed that internal residual strain from bar processing and, most importantly, surface machining damage, cause lower elongation in the as-received material. Because fracture of this intermetallic alloy initiates at the surface, it is particularly susceptible to surface machining damage, i.e., the near-surface region has already exhausted most of its ability to accumulate tensile strain. During heat treatment, the internal residual strain and near-surface machining damage are eliminated and ductility is improved, despite a higher degree of crystallographic ordering in the heat-treated condition (which typically lowers ductility). Furthermore, if machining is again performed after heat treatment, the material again exhibits brittle behavior, even with only light touch-up machining passes. Here, in this work, methods of tensile strain measurement were investigated, namely conventional knife-edge extensometry and noncontact digital image correlation (DIC) on heat-treated material. For clip-on knife-edge extensometry, the range of failure strain was 2.5-5.5% for heat-treated Hiperco. For noncontact methods, ductility up to 7% was observed. The results highlight the tendency for the alloy to fail at surface imperfections, even those produced by application of the extensometer itself. Noncontact laser extensometry is recommended for determining the intrinsic ductility of the alloy. A method of laser surface modification was developed which increased ductility by ~ 100% compared to unmodified samples. The high cooling rates achieved during laser surface processing can bypass the ordering reaction and produce a ductile disordered structure at the surface that exhibits ductile fracture characteristics.

EBSD↗
DOE OSTI2018

Precursor and Neutral Loss Scans in an RF Scanning Linear Quadrupole Ion Trap

Methodology for performing precursor and neutral loss scans in an RF scanning linear quadrupole ion trap is described and compared to the unconventional ac frequency scan technique. In the RF scanning variant, precursor ions are mass selectively excited by a fixed frequency resonance excitation signal at low Mathieu q while the RF amplitude is ramped linearly to pass ions through the point of excitation such that the excited ion’s m/z varies linearly with time. Ironically, a nonlinear ac frequency scan is still required for ejection of the product ions since their frequencies vary nonlinearly with the linearly varying RF amplitude. In the case of the precursor scan, the ejection frequency must be scanned so that it is fixed on a product ion m/z throughout the RF scan, whereas in the neutral loss scan, it must be scanned to maintain a constant mass offset from the excited precursor ions. Both simultaneous and sequential permutation scans are possible; only the former are demonstrated here. The scans described are performed on a variety of samples using different ionization sources: protonated amphetamine ions generated by nanoelectrospray ionization (nESI), explosives ionized by low-temperature plasma (LTP), and chemical warfare agent simulants sampled from a surface and analyzed with swab touch spray (TS). We lastly conclude that the ac frequency scan variant of these MS/MS scans is preferred due to electronic simplicity. In an accompanying manuscript, we thus describe the implementation of orthogonal double resonance precursor and neutral loss scans on the Mini 12 using constant RF voltage. .

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2026

Evidence for strong electronic correlations in the bulk state of grey arsenic

Here, we investigate the electron band structure of grey arsenic, whose (111) face hosts the topological Shockley state. Interestingly, the bulk band close to the touching point with the surface state exhibits the characteristics of inelastic scattering. Moreover, the band structure analysis reveals linearity in the imaginary part of electron self-energy. These features are analogous to those observed in high-temperature superconductors and marginal Fermi liquid systems, respectively, where strong electronic correlations exist. Our results suggest that correlated many-body states can be connected by non-interacting topological states, providing a viable playground to explore the coupling between topological and correlated states via grey arsenic surface.

ARPES↗
DOE OSTI2018

Imaging of the Gallbladder with Multi-energy CT

Purpose of Review: The goal of this review article is to provide an overview of applications of multi-energy CT as they pertain to gallbladder imaging. We discuss benefits and shortcomings of MECT of various gallbladder pathology, with an emphasis on the imaging of gallstones and cholecystitis. It also touches on promising areas that warrant further investigation. Recent Findings: MECT has demonstrated improved sensitivity for cholelithiasis compared to conventional single-energy CT, with added value of MECT reconstructions, particularly virtual monoenergetic reconstructions, to detect isoattenuating gallstones. MECT iodine maps and virtual monoenergetic images potentially add value in evaluating other gallbladder pathologies, including detecting complications of acute cholecystitis, characterization of xanthogranulomatous cholecystitis and adenomyomatosis, and identifying and evaluating the extent of gallbladder carcinoma. Summary: MECT is emerging as a useful exam to evaluate the gallbladder, particularly in the setting of acute abdominal pain, and has the potential to eliminate the need for other imaging exams such as ultrasound.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2024

Transport from electron-scale turbulence in toroidal magnetic confinement devices

Plasma transport driven by turbulence ultimately determines the energy confinement performance of controlled fusion devices regardless of their confinement schemes and configurations. A large variety of plasma instabilities have been proposed for driving turbulence responsible for anomalous plasma transport beyond classical/neoclassical transport due to collisions. Although ion-scale turbulence usually dominates due to its large eddy size and saturation level, electron-scale turbulence has been recognized to be important in regions where ion-scale turbulence is suppressed (e.g., in internal transport barrier and in spherical tokamak H-mode plasmas) or is close to marginality. Electron-scale turbulence has been shown to nonlinearly interact with ion-scale turbulence, which modifies the dynamics of both and affects the resulting plasma transport, particularly when ion-scale instability is weakly driven. In this review paper, we focus on electron-scale turbulence that is believed to operate in magnetically confinement fusion devices and aim to provide a review of theoretical, numerical, and experimental developments in understanding electron-scale turbulence and its role in driving anomalous plasma turbulence. In particular, we focus on the electrostatic electron temperature gradient (ETG) mode which is the most widely recognized plasma instability underlying electron-scale turbulence observed in magnetically confined plasmas. Finally, we note that there are other less studied instabilities that might be responsible for observed electron-scale turbulence, most notably ubiquitous mode, and short-wavelength ion temperature gradient (SWITG) mode, which will be briefly touched on in this review.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

dCache: The Storage System of Choice for Data-Intensive Applications

The ever-increasing volumes of data produced by modern scientific facilities like EuXFEL and LHC put significant stress on data management infrastructure operated by laboratories and research centers. The challenges to be addressed span the entire data life cycle, from ingest and efficient data analysis to long-term preservation, typically involving large tape libraries. dCache, a storage system developed in collaboration between the Deutsches Elektronen-Synchrotron (DESY), Fermi National Accelerator Laboratory, and Nordic e-Infrastructure Collaboration (NeIC), is designed to manage a large number of disk servers and to facilitate transparent data migration to and from archival storage. Its multifaceted approach offers a unified method to support a variety of scientific use cases with the same storage infrastructure, including high-throughput data ingest, data sharing over wide area networks, efficient access from HPC clusters, and long-term data preservation on tertiary storage. Initially developed for high energy physics (HEP) experiments, dCache is now used by various scientific communities, including astrophysics, biomedical research, and life sciences, each having specific requirements. This paper presents architecture, deployment strategies, performance and scalability enhancements, and recent advancements in dCache addressing the needs of scientific communities. Finally, we touch on the development and release process, ensuring the software’s high quality.

DCache↗
DOE OSTI2022

Assessing entropy for catalytic processes at complex reactive interfaces

When chemical reactions are accelerated by a catalyst, entropy differences between reactants and their transient intermediates can be the driving force behind the promotion or inhibition of desired and parasitic chemical pathways. Understanding and controlling catalytic processes therefore requires both a fundamental and practicable understanding of entropy in addition to enthalpy. In unstructured media such as the vapor phase equilibrated with sparsely covered surfaces, entropy can be adequately accounted for by well-established approaches based on translational, rotational, and harmonic vibrational partition functions. However, these approximations become inadequate in more complex condensed phase environments, e.g., solid liquid interfaces of confined reaction spaces. In this chapter, we provide an overview of the state-of-art in the computational quantification of entropy and its known ramifications on catalysis. The fundamental roles of thermodynamics and kinetics in catalysis are covered in enough detail to appreciate and contextualize the computational methods employed to compute chemically accurate estimates of entropy. These methods are discussed in appropriate detail and range from the ubiquitous harmonic oscillator approximation where entropy unrelated to high frequency oscillations is typically underestimated, to enhanced free energy sampling with molecular dynamics where the desired accuracy must be weighed against the associated computational cost of obtaining it. The rising importance of machine learning and artificial intelligence in accelerating methodological progress in this field is touched upon, as well. Finally, applications, successes, and pitfalls of using these methods are provided to showcase past and present accomplishments while clarifying where improvements in both understanding and methodology are still needed.

Kollias, Loukas↗
DOE OSTI2022

Grain incompatibility determines the local structure of amorphous grain boundary complexions

Amorphous grain boundary complexions lack long-range crystalline order but are not featureless, as distinct gradients in structural short-range order have been reported through their thickness. In this work, we test the hypothesis that the distribution of short-range order is determined by the confining crystals using atomistic simulations of both Cu-Zr bicrystals and a random polycrystal. Voronoi polyhedra with structures similar to that of perfect face-centered cubic serve as signatures of high structural order and are only found at the amorphous-crystalline transition regions. The density of the ordered structural motifs within a specific amorphous-crystalline transition region is found to not be directly determined by the orientation and symmetry of the grain which touches it, but rather by the incompatibility between the two confining grains. Further, ordered polyhedra density is found to be inversely related to grain incompatibility, meaning that large incompatibilities between the confining crystals lead to less order in the amorphous-crystalline transition region. The finding that the entire grain-film-grain system must be considered to understand local structure unequivocally demonstrates that amorphous complexions are not simply a collection of independent phases which happen to nucleate at a grain boundary. Rather, an amorphous grain boundary complexion is a single entity that finds a local equilibrium configuration.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Line of magnetic monopoles and an extension of the Aharonov–Bohm effect

In the Landau problem on the two-dimensional plane, physical displacement of a charged particle (i.e., magnetic translation) can be induced by an in-plane electric field. The geometric phase accompanying such magnetic translation around a closed path differs from the topological phase of Aharonov and Bohm in two essential aspects: The particle is in direct contact with the magnetic field and the geometric phase has an opposite sign from the Aharonov–Bohm phase. We show that magnetic translation on the two-dimensional cylinder implemented by the Schrödinger time evolution truly leads to the Aharonov–Bohm effect. The magnetic field normal to the cylinder’s surface corresponds to a line of magnetic monopoles of uniform density whose simulation is currently under investigation in cold atom physics. In order to characterize the quantum problem, one needs to specify the value of the magnetic flux (modulo the flux unit) that threads but not in touch with the cylinder. A general closed path on the cylinder may enclose both the Aharonov–Bohm flux and the local magnetic field that is in direct contact with the charged particle. This suggests an extension of the Aharonov–Bohm experiment that naturally takes into account both the geometric phase due to local interaction with the magnetic field and the topological phase of Aharonov and Bohm.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2018

Fate of superconductivity in three-dimensional disordered Luttinger semimetals

Superconducting instability can occur in three-dimensional quadratic band crossing semimetals only at a finite coupling strength due to the vanishing of density of states at the quadratic band touching point. Since realistic materials are always disordered to some extent, we study the effect of short-ranged-correlated disorder on this superconducting quantum critical point using a controlled loop-expansion applying dimensional regularization. The renormalization group (RG) scheme allows us to determine the RG flows of the various interaction strengths and shows that disorder destroys the superconducting quantum critical point. In fact, the system exhibits a runaway flow to strong disorder.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Search for plasmons in isotropic Luttinger semimetals

Luttinger semimetals include materials like gray tin (α-Sn) and mercury telluride, which are three-dimensional gapless semiconductors having a quadratic band crossing point (QBCP). Due to a growing interest in QBCPs and new experimental efforts, it is essential to study the finite-temperature properties of such systems. In this paper, we investigate the emergence of plasmons in the presence of Coulomb interactions in isotropic Luttinger semimetals, for zero as well as generic nonzero temperatures. When the Fermi level lies right at the QBCP, which is the point where twofold degenerate conduction and valence bands touch each other quadratically, we find that plasmons cannot appear at zero temperature. However, for nonzero temperatures, thermal plasmons are generated. Whether they are long-lived or not depends on the values of temperature, effective electron mass and effective fine-structure constant, and the number of fermion flavors. We also numerically estimate the behavior of the inelastic scattering rate at nonzero temperatures, as a function of energy, where the signatures of the QBCP thermal plasmons show up as a sharp peak. Our results will thus serve as a guide to experimental probes on these systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2018

Effectiveness of supercritical-CO 2 and N 2 huff-and-puff methods of enhanced oil recovery in shale fracture networks using microfluidic experiments

Current oil recovery methods in hydraulically fractured shale reservoirs have a low recovery efficiency of about 10%. The objective of this work is to investigate the effectiveness of nitrogen and supercritical carbon dioxide in the huff-and-puff method for enhanced oil recovery as a means to re-energize reservoirs and improve recovery rates. Here, we conduct direct visualization experiments with a microfluidic system to reveal the mechanisms and to quantify the recovery rates of oil from fracture networks. We compared the effectiveness of water, nitrogen and supercritical carbon dioxide at reservoir conditions in a process mimicking the huff-and-puff method in both dead-end and connected fracture systems. The microfluidic chips were made of glass and placed in a confining pressure system pressurized to 10 MPa, 50 °C. The system was allowed to equilibrate, and then depressurized to simulate huff-and-puff oil recovery. Fluorescence microscope images were continuously taken to visualize and calculate residual oil saturation as a function of pressure drawdown. As the system was depressurized from 10 MPa, gas exsolution from the oil liquid phase, including bubble nucleation, growth, and coalescence, appeared to be the main driver for mobilizing oil from the fracture networks. Injection of supercritical CO 2 resulted in the highest recovery rate with an average end-point recovery of about 90% in the connected fracture network and 60% in the dead-end fracture network. N 2 has lower solubility in oil and hence showed a lower recovery rate of 40% in the connected fracture network and 25% in the dead-end fracture network. Injection of water had no effect on oil mobilization since water is insoluble, immiscible and incompressible. The main mechanism of enhanced recovery was gas exsolution from the liquid phase as pressure was decreased below the bubble point pressure. Because the gas was distributed throughout the oil phase, bubble nucleation, growth, coalescence, and elongation occurred throughout the fracture network. Expansion of the gas forced oil out of the network through piston displacement in continuous oil areas and film flow in the dispersed oil areas. Bubbles began as spheres and grew until they touched the fracture walls where they elongated along the fracture length. The bubble growth rate depended on local mass transfer from liquid to gas phase and gas volume expansion due to pressure drop. The efficiency of the huff-and-puff process is dependent on the solubility and miscibility of the injection fluid with oil. High gas solubility allows for more bubble nucleation, growth and expansion during the depressurization cycle.

58 GEOSCIENCES↗
DOE OSTI2018

GLP-1 receptor agonist liraglutide exerts central action to induce β-cell proliferation through medulla to vagal pathway in mice

Highlights: • ICV injected GLP-1RA liraglutide and GLP-1 induce pancreatic β-cell proliferation. • This effect is induced by single shot liraglutide at low dose not touching feeding. • This effect is inhibited by atropine and hence possibly mediated by vagal efferent. • ICV liraglutide activates dorsal vagal complex (DVC), suggesting DVC-vagal reflex. • This pathway may serve to counteract β-cell reduction in diabetic patients. Endogenous GLP-1 and GLP-1 receptor agonists (GLP-1RAs) regulate glucose metabolism via common and distinct mechanisms. Postprandial release of GLP-1 is modest and it is degraded by DPP-4 within 2 min, and hence it cannot enter the brain in substantial amount. In contrast, DPP-4-resistant GLP-1RAs are administered at 10 times higher concentration than endogenous GLP-1 level, which enables them to reach several brain regions including ARC and AP, the areas implicated in glucose metabolism. Hence, some of the effects of GLP-1RAs observed clinically and experimentally, including pancreatic β-cell proliferation, are thought to involve the brain. However, the effects of centrally acting GLP-1/GLP-1RAs on glucose metabolism and underlying neural mechanism are unclear. This study aimed to establish the link of central GLP-1/GLP-1RA action to pancreatic β-cell proliferation. Both subcutaneous (SC) and intracerebroventricular (ICV) injections of liraglutide increased the number of pancreatic β-cells expressing Ki67 and PCNA, proliferation markers, in C57BL/6J mice. This effect was induced by single ICV administration of liraglutide at relatively low dose that was incapable of suppressing food intake. These SC and ICV liraglutide-induced effects were inhibited by 50% and 70%, respectively, by pretreatment with atropine, a muscarinic receptor blocker. ICV liraglutide induced c-Fos expression in the area postrema (AP), nucleus tractus solitaries (NTS), and dorsal motor nucleus of the vagus (DMX) of the brain stem. These results demonstrate that central action of liraglutide induces pancreatic β-cell proliferation via the pathway involving the brain stem AP/NTS/DMX area and vagus nerve. This route is highly sensitive to GLP-1/GLP-1RA. Hence, this brain-pancreatic β-cell pathway may operate in type 2 diabetic patients treated with GLP-RAs and serve to counteract the reduction of β-cell mass.

60 APPLIED LIFE SCIENCES↗