Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TiOs”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Influence of TiO 2 on the densification behaviour of Yb 2 O 3

The effect of temperature and heating rate on the densification of ytterbia (Yb 2 O 3 ), with and without titania (TiO 2 ) doping was investigated. It is shown that up to a certain doping level, titania doping enhances the densification behaviour of ytterbia. The effect of titania doping on crystal structure confirms that titania is substitutionally incorporated in ytterbia up to the solubility limit, which corresponds well with the densification results. The increased densification rate of titania-doped ytterbia is attributed to the formation of cation vacancy and lattice distortion. Using constant heating rate experiments, the activation energy for densification has been calculated and it is shown that in the intermediate density range (60% to 85%), the activation energy is independent of the density. Furthermore, titania doping increases the activation energy for densification.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2021

The local structure of 0.5Ba(Zr 0.2 Ti 0.8 )O 3 -0.5(Ba 0.7 Ca 0.3 )TiO 3 from neutron total scattering measurements and multi-edge X-ray absorption analysis

Neutron total scattering measurements and multi-edge X-ray absorption analysis were performed on a 0.5Ba(Zr 0.2 Ti 0.8 )O 3 -0.5(Ba 0.7 Ca 0.3 )TiO 3 powder sample. The TiIII-II edges showed that titanium is distorted in the rhombohedral [111] direction (in a BaTiO 3 -like chemical and bonding environment). Extended X-ray fine structure analysis (EXAFS) was performed on the zirconium K-edge and it was found that zirconium resides in the center of the ZrO 6 octahedra in cubic symmetry. Furthermore, the local structure was initially modelled with the orthorhombic Amm2 space group with unsatisfactory results. To better model the local structure, the results from the EXAFS analysis were incorporated into the small-box pair distribution function (PDF) refinements and the best fit of the observed data was a combination of barium calcium titanate (BCT) and barium calcium zirconate (BCZ) phases.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Adsorption, charge transfer and a coverage-driven transition of alkali metals on rutile TiO 2 (110)

The interaction of alkali metals with metal oxide surfaces is central to tuning surface reactivity in heterogeneous catalysis and photocatalysis. Here we present a comprehensive DFT+U study of the adsorption of alkali metals (Li, Na, K, Rb, Cs) on the (110) surface of rutile TiO 2 . At low coverage (θ = 1/8), all alkali metals bind preferentially to bridging oxygen sites with adsorption energies in the range −4.06 to −3.33 eV, transferring nearly one full electron (0.92–0.99 |e|) to the substrate and inducing Ti 4+ → Ti 3+ reduction. The excess charge localizes preferentially at subsurface Ti sites in the form of small polarons. Diffusion barriers indicate facile motion along bridging-oxygen rows, whereas inter-row hopping is strongly hindered. Coverage effects were examined systematically for potassium: adsorption energy and charge transfer per K atom decrease monotonically with increasing θ. Strikingly, a sharp energy discontinuity occurs between θ = 4/8 and θ = 5/8 (ΔE ≈ 1 eV per atom), which we identify as a coverage-driven structural transition arising from steric packing constraints and enhanced K–K electrostatic repulsion once every (1×1) surface cell is occupied. This structural transition perfectly correlates with a dramatic drop in the work function down to an ultra-low minimum of 0.84 eV at θ=5/8, followed by a metallization- driven recovery at higher coverages. Ab initio molecular dynamics simulations confirm zigzag K arrangements at moderate coverage (θ = 1/3), while at high coverage (θ = 2/3) short-range K–K correlations emerge without long-range order. These results provide atomistic insight into the structure–activity relationships underlying alkali promotion effects on oxide-supported catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Site-Selective Atomic Layer Deposition at Thermally Generated Surface Oxygen Vacancies on Rutile TiO 2

Unique atomic arrangements (i.e., defects) on material surfaces may exhibit distinctive reactivity that affords opportunities for selective surface chemistry exclusively at those sites. While theoretically appealing, site-selective atomic layer deposition (ALD) processes remain largely unrealized experimentally. Here we provide evidence for site-selective ALD that exclusively targets oxygen vacancies thermally generated at the surface of TiO 2 single crystals. High-resolution in situ ellipsometry reveals the nucleation behavior of dimethylaluminum isopropoxide (DMAI) and water at process conditions precisely tuned for selective hydroxylation of surface defects. An island growth model for nucleation and atomic force microscopy (AFM) imaging are consistent with a site-selective growth mechanism that depends on the surface oxygen vacancy density. This approach to direct ALD reactions at defective surface sites may provide future opportunities for targeted remediation of electronically imperfect interfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Metal-to-Ligand Charge-Transfer Spectrum of a Ru-Bipyridine-Sensitized TiO 2 Cluster from Embedded Multiconfigurational Excited-State Theory

Understanding optical properties of the dye molecule in dye-sensitized solar cells (DSSCs) from first-principles quantum mechanics can contribute to improving the efficiency of such devices. While density functional theory (DFT) and time-dependent DFT have been pivotal in simulating optoelectronic properties of photoanodes used in DSSCs at the atomic scale, questions remain regarding DFT’s adequacy and accuracy to furnish critical information needed to understand the various excited-state processes involved. In this work, we simulate the absorption spectra of a dye-sensitized solar cell analogue, comprised of a Ru-bipyridine (Ru-bpy) dye molecule and a small TiO2 cluster via DFT and via an accurate embedded correlated wavefunction (CW) theory. We generated CW spectra for the adsorbed Ru-bpy dye via a recently introduced capped density functional embedding theory or capped-DFET (to generate the embedding potential that accounts for the interaction of the molecule and the TiO 2 cluster). We then combined capped-DFET with the accurate but expensive multiconfigurational complete active space second-order perturbation theory (CASPT2)—embedded CASPT2. Because the CW theory is conducted on only a portion of the total system in the presence of an embedding potential that describes that portion’s interaction with its environment, we efficiently obtain CW-quality predictions that reflect local properties of the entire system. Specifically, for example, with capped-DFET and embedded CW theory, we can simulate accurately a plethora of metal-to-ligand charge-transfer excited properties at a manageable computational cost. Here, we predict detailed electronic spectra within the visible region, featuring the lowest three singlet and triplet excited states, along with predictions of the singlets’ lifetimes. We illustrated these results using a Jablonski diagram that show the relative energy position of the singlet and longer-lived triplet excited states and analyzed and proposed relaxation paths for the excited state corresponding to the most intense but short-lived absorption (interconversion, intersystem crossing, fluorescence, and phosphorescence) that may lead to longer-lived excited states necessary for efficient charge separation required to generate current in solar cells.

14 SOLAR ENERGY↗
DOE OSTI2022

Tuning Strong Metal–Support Interaction Kinetics on Pt-Loaded TiO 2 (110) by Choosing the Pressure: A Combined Ultrahigh Vacuum/Near-Ambient Pressure XPS Study

Pt catalyst particles on reducible oxide supports often change their activity significantly at elevated temperatures due to the strong metal–support interaction (SMSI), which induces the formation of an encapsulation layer around the noble metal particles. However, the impact of oxidizing and reducing treatments at elevated pressures on this encapsulation layer remains controversial, partly due to the “pressure gap” between surface science studies and applied catalysis. In the present work, we employ synchrotron-based near-ambient pressure X-ray photoelectron spectroscopy (NAP-XPS) to study the effect of O 2 and H 2 on the SMSI-state of well-defined Pt/TiO 2 (110) catalysts at pressures of up to 0.1 Torr. Further, by tuning the O 2 pressure, we can either selectively oxidize the TiO 2 support or both the support and the Pt particles. Catalyzed by metallic Pt, the encapsulating oxide overlayer grows rapidly in 1 × 10 –5 Torr O 2 , but orders of magnitude less effectively at higher O 2 pressures, where Pt is in an oxidic state. While the oxidation/reduction of Pt particles is reversible, they remain embedded in the support once encapsulation has occurred.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

NO Degradation on the Anatase TiO 2 (001) Surface in the Presence of Water

Nitric oxide (NO) is known to degrade to nitric acid (HNO 3 ) on anatase TiO2 facets under visible light irradiation in the presence of water. However, the exact role that water plays in this photoreaction is not fully understood. Here, by employing the density functional theory (DFT) and time-dependent density functional tight binding (TD-DFTB), we show the viability of two suggested degradation pathways involving water. Both reaction pathways are triggered by a charge transfer excitation from the NO molecule to the TiO 2 surface. In one of them, NO interacts with dissociated water molecules adsorbed on the surface to form HONO + , whereas for the second pathway, NO is oxidized to NO 2 + by capturing one oxygen atom from the substrate. Both HONO and NO 2 are known byproducts in the photodegradation of NO, which further react with adsorbed water to finally produce HNO 3 . We also demonstrate by means of nudged elastic band calculations that these reactions are unlikely to happen without illumination.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Tuning the Placement of Pt “Single Atoms” on a Mixed CeO 2 –TiO 2 Support

Defect sites on the oxide supports can be used to anchor and activate "single-atoms" catalysts (SACs). By engineering the anchoring sites for supporting SACs, one can alter their electronic and atomic structures which, in turn, define their activity, selectivity, and stability for catalytic reactions. To create and tune unique sites for Pt SACs on CeO 2 support, in this work, we synthesized a system consisting of CeO 2 decorated on TiO 2 nano-oxides for supporting the Pt SACs and investigated the effect of Pt weight loading. Here, a combination of multiple structural characterization methods including diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), X-ray photoelectron spectroscopy (XPS) and X-ray absorption spectroscopy (XAS) were employed to characterize the distribution of charge states of single atoms and evaluate the heterogeneity of their binding sites. We have found that the placement of Pt atoms can be tuned on a mixed oxide surface by changing the weight loading of Pt.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2025

Nanoscopic Structure of the Interface between Reduced TiO 2– x (110) and Water Vapor

We investigate the interaction between a reduced rutile TiO 2–x (110)-(1×4) surface and water vapor at ambient pressures using atomic force microscopy and X-ray photoelectron spectroscopy (AP-AFM and AP-XPS). Our results reveal that water molecules strongly interact with the reduced surface, leading to hydroxylation and localized clustering of water molecules. In defect-rich regions, AFM tip-induced restructuring causes removal of the topmost surface layer, highlighting the lowered cohesive energy of the surface atoms upon hydroxylation. These findings provide new insights into the water adsorption and restructuring mechanisms on reducible transition metal oxides, relevant for catalytic and environmental applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Catalytic Ammonia Synthesis over Pure, Defective, and Metal-Doped Rutile TiO 2 : A Periodic DFT Study

In this work, we aim to describe the energetics associated with the formation of ammonia from N 2 interacting with doped hydroxylated rutile TiO 2 (110) surfaces with the vacant O 2c site, following the reaction N 2 + 3H 2 O → 2NH 3 + 3/2O 2 . The water molecules interact with the surface, creating exposed Ti−OH groups that can transfer hydrogen to the adsorbed N 2 molecule. Two metal dopants are evaluated: Mo and Ta. For both metals, calculations show a dramatic decrease in the energy of most intermediates during the entire mechanism, leading to more favorable reaction mechanisms. Nonetheless, it is worth noting that when the Ti 6c site of the vacant site is doped with either Mo or Ta, there is a stronger effect on the energetics than doping on the exposed Ti 5c sites. The effect of increasing the concentration of metal dopants on the vacant site was also investigated. In this case, calculations indicate that a higher percentage of the dopant on the surface results in a more substantial decrease in the energy of most intermediates, suggesting that increasing the dopant content could be beneficial for the catalytic process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Atomic-Scale View of Redox Induced Changes for Monolayer MoO x on α-TiO 2 (110) with Chemical-State Sensitivity

Supported molybdenum oxide (MoO x ) plays an important role in catalytic transformations from alcohol dehydrogenation to transesterification. During these reactions, Mo and oxygen surface species undergo structural and chemical changes. A detailed, chemical-state specific, atomic-scale structural analysis of the catalyst under redox conditions is important for improving catalytic properties. In this study, monolayer of MoO x grown on α-TiO 2 (110) by atomic-layer deposition is analyzed by X-ray standing wave (XSW) excited X-ray photoelectron spectroscopy (XPS). The chemical shifts for Mo 2p 3/2 and O 1s peaks are used to distinguish Mo 6+ from Mo 4+ and surface O from bulk O. Excitation of XPS by XSW allows pin-pointing the location of these surface species relative to the underlying substrate lattice. Finally, measured 3D composite atomic density maps for the oxidized and reduced interfaces compare well with our density functional theory models, and collectively create a unique view of the redoxdriven dynamics for this complex catalytic structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

The Role of Surface Hydroxyls in the Mobility of Carboxylates on Surfaces: Dynamics of Acetate on Anatase TiO 2 (101)

The dynamics of reactive intermediates are important in catalysis for understanding transient species, which can drive reactivity and the transport of species to reaction centers. In particular, the interplay between surface-bound carboxylic acids and carboxylates is important for numerous chemical transformations, including CO 2 hydrogenation and ketonization. Here, we investigate the dynamics of acetic acid on anatase TiO 2 (101) using scanning tunneling microscopy experiments and density functional theory calculations. We demonstrate the concomitant diffusion of bidentate acetate and a bridging hydroxyl and provide evidence for the transient formation of molecular monodentate acetic acid. The diffusion rate is strongly dependent on the position of hydroxyl and adjacent acetate(s). A facile three-step diffusion process is proposed consisting of acetate and hydroxyl recombination, acetic acid rotation, and acetic acid dissociation. Here this study clearly demonstrates that the dynamics of bidentate acetate could be important in forming monodentate species, which are proposed to drive selective ketonization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

High- Q Nanophotonic Resonators on Diamond Membranes using Templated Atomic Layer Deposition of TiO 2

Integrating solid-state quantum emitters with nanophotonic resonators is essential for efficient spin-photon interfacing and optical networking applications. While diamond color centers have proven to be excellent candidates for emerging quantum technologies, their integration with optical resonators remains challenging. Conventional approaches based on etching resonators into diamond often negatively impact color center performance and offer low device yield. In this work, we developed an integrated photonics platform based on templated atomic layer deposition of TiO 2 on diamond membranes. Our fabrication method yields high-performance nanophotonic devices while avoiding etching wavelength-scale features into diamond. Moreover, this technique generates highly reproducible optical resonances and can be iterated on individual diamond samples, a unique processing advantage. Our approach is suitable for a broad range of both wavelengths and substrates and can enable high-cooperativity interfacing between cavity photons and coherent defects in diamond or silicon carbide, rare earth ions, or other material systems.

42 ENGINEERING↗
DOE OSTI2025

Efficient Size-Dependent Hot Electron Transfer from Au to TiO 2 Nanoparticles

Harvesting of plasmon-induced hot carriers at the metal/semiconductor interface offers a promising and innovative avenue for solar energy conversion. However, their practical implementation is often hampered by their limited efficiencies. Herein, we have demonstrated a highly efficient plasmonic hot electron transfer with a quantum efficiency (QE) of up to 57 ± 4% from 5.25 nm Au nanoparticles (NPs) to TiO 2 films under 400 nm ultrafast laser excitation. The observed hot electron transfer QEs decrease at larger particle sizes, to 20% for 9.1 nm Au, and show negligible changes with excitation wavelengths at 400, 500, and 600 nm. Analysis of the size and excitation wavelength dependent hot electron transfer QEs suggests they contain contributions of interband absorption, indirect plasmon-induced hot electron transfer (PHET), and direct plasmon-induced interfacial charge transfer transition (PICTT) pathways, and QEs of all three pathways increase at smaller Au size. Our result suggests that reducing plasmon particle sizes is a promising approach for efficient plasmonic hot-carrier extraction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Selective Hydration of Rutile TiO 2 as a Strategy for Site-Selective Atomic Layer Deposition

In this report the feasibility of a site-selective hydration strategy that enables site-selective atomic layer deposition (ALD) is investigated among four rutile TiO 2 facets [(110), (100), (101) and (001)] and their most prevalent step edges. First-principles simulations of asymmetric slab models were utilized to create accurate representations of pristine terrace and step edge sites. The adsorption free energies for molecular and dissociative adsorption of H 2 O were calculated to evaluate this strategy as a viable route to step edge selectivity. We predict that selective hydroxylation is possible on the 110 and 001 step edges and further computationally evaluate three metalorganic ALD precursors for their compatibility with the selective hydration strategy. Experimental evidence for delayed nucleation of ALD on rutile (001), (110), and (100) TiO2 single crystals corroborates predictions of the dehydration of the surface and suggests the possibility of site-selective ALD.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

(Photo)Electrocatalytic CO 2 Reduction at the Defective Anatase TiO 2 (101) Surface

Excessive carbon dioxide (CO 2 ) emissions by combustion of fossil fuels are linked to global warming and rapid climate change. One promising route to lowering the concentration of CO 2 in the atmosphere is to reduce it to useful small molecules via photoelectrocatalytic hydrogenation, which would enable solar energy storage with a zero-carbon emission cycle and perform a more efficient separation of the photogenerated electron and hole pair than pure photocatalysis. Indeed, photoelectrocatalytic CO 2 reduction has been an intense focus of research. Using the density functional theory (DFT), we studied the CO 2 reduction reaction on the defective anatase TiO 2 (101) surface, at both the solvent/catalyst and the electrolyte/catalyst interfaces. The analysis of the electronic structure of the surface shows a contrast between the solvent/catalyst and the electrolyte/catalyst interfaces, which results in the two corresponding catalytic cycles being distinct. Furthermore, our study explains at the electronic and mechanistic levels why methanol is the main product in the presence of the electrolyte and why the overpotential is not only controlled by the reaction process but also by the diffusion process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Hydrogen Spillover Is Regulating Minority Rh 1 Active Sites on TiO 2 in Room-Temperature Ethylene Hydrogenation

The complicated dynamics of active sites on single-atom catalysts under reducing conditions limits their applications in hydrogenation reactions and mechanistic understanding. Herein, we report that on Rh 1 /TiO 2 , *H spillover during room-temperature ethylene hydrogenation hydroxylates and reduces TiO 2 , enhancing the intrinsic activity of Rh 1 by 9-fold. Spectroscopic and kinetic evidence suggests that the spillover of *H is suppressed by their facile reaction with C 2 H 4 , most of the spilled *H are nonreactive spectators, and >99% turnovers occur on a small subset (<20%) of exposed “active Rh 1 ”. Steady-state kinetics indicates competitive adsorption between H and C 2 H 4 , H 2 dissociation is the rate-determining step, and the apparent activation barrier (E a,app ) of the reaction is ~48 kJ/mol. The evolution of Rh 1 under H 2 was further tracked by spectroscopic and microscopic techniques at elevated temperatures. At 200 °C, more Rh 1 are exposed, but these Rh 1 are at least 5-fold less active than that of the “active Rh 1 ”. At 300 °C, Rh clusters derived from Rh 1 become the main active sites, shifting E a,app to 62 kJ/mol, characteristic of Rh nanoparticles. At ≥400 °C, larger and more active Rh particles in the strong metal–support interaction state are created. In conclusion, this work revealed the unexpected regulation effects of *H spillover on M 1 active sites under ambient conditions, differentiated the minority active M 1 sites, and demonstrated how the stability of M 1 under reducing atmospheres affects hydrogenation catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Unraveling the CO Oxidation Mechanism over Highly Dispersed Pt Single Atom on Anatase TiO 2 (101)

Catalysts with noble metals deposited as single atoms on metal oxide supports have recently been studied extensively due to their maximized metal utilization and potential for performing difficult chemical conversions owing to their unique electronic properties. Understanding of the reaction mechanisms on supported single-metal atoms is still limited but is highly important for designing more efficient catalysts. In this study, we report the complexity of the CO oxidation reaction mechanism on Pt single atoms supported on anatase TiO 2 (Pt SA /a-TiO 2 ) by coupling density functional theory (DFT) calculations and microkinetic analysis with kinetic measurements, in situ/operando infrared, and X-ray absorption spectroscopies. Starting from the adsorbed Pt SA occupying an O vacancy induced by reductive pretreatment, we show that CO oxidation follows a complex mechanism consisting of initiation steps to reorganize the active site and multibranch reactive cycles, with the Pt SA /a-TiO 2 catalyst not returning to its initial configuration. The initiation step consists of CO and O 2 adsorption healing the O vacancy, followed by CO oxidation using gas-phase CO to form Pt(CO). The reactive cycle alternates O 2 adsorption and dissociation to oxidize the catalyst to Pt(O)(O)(CO) and branching pathways of competing Langmuir–Hinshelwood (LH)- or Eley–Rideal (ER)-type CO oxidation steps to reduce it again to Pt(CO). In situ/operando infrared experiments, including cryogenic CO adsorption and isotopic CO exchange, confirm the combined involvement of strongly adsorbed CO and gas-phase CO in an Eley–Rideal step along the reaction cycle. Microkinetic modeling shows that Pt single atoms are present in a mixture of Pt(CO), Pt(CO)(O 2 ), Pt(O)(CO)(O 2 ), and Pt(CO)(CO 3 ) structures as the main intermediates during steady-state CO oxidation, all having the C–O vibrational stretch close to the experimentally observed value of 2115 cm –1 . Microkinetic modeling also shows that the fractional orders of CO and O 2 measured experimentally originate from multiple steps with a high degree of rate control and not from a simple competitive adsorption. The results demonstrate the complex reaction pathways that even CO oxidation on a simple single-atom system can follow, providing mechanistic insights for designing efficient Pt-based single-atom catalysts. Here, we further show that microkinetic modeling results are sensitive to changes in energies of intermediate and transition states within errors of density functional theory, which can ultimately lead to incorrect conclusions regarding the reaction pathways and most abundant reaction intermediates if not accounted for by experiments.

36 MATERIALS SCIENCE↗