Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Tensor factorizations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Improved Tensor Current Limit from 8 B 𝛽 Decay Including New Recoil-Order Calculations

A precision measurement of the 𝛽 + decay of 8 B was performed using the Beta-decay Paul Trap to determine the 𝛽−𝜈 angular correlation coefficient 𝑎 𝛽⁢𝜈 . The experimental results were combined with new ab initio symmetry-adapted no-core shell-model calculations to yield the second-most precise measurement from Gamow-Teller decays, 𝑎 𝛽⁢𝜈 = −0.3345 ± 0.001⁢9 stat ± 0.002⁢1 syst . This value agrees with the standard model value of −1/3 and improves uncertainties in 8 B by nearly a factor of 2. By combining results from 8 B and 8 Li , a tight limit on tensor current coupling to right-handed neutrinos was obtained. A recent global evaluation of all other precision 𝛽 decay studies suggested a nonzero value for right-handed neutrino coupling in contradiction with the standard model at just above 3⁢𝜎. Finally, the present results are of comparable sensitivity and do not support this finding.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2015

Multi-mode technique for the determination of the biaxial Y{sub 2}SiO{sub 5} permittivity tensor from 300 to 6 K

The Y{sub 2}SiO{sub 5} (YSO) crystal is a dielectric material with biaxial anisotropy with known values of refractive index at optical frequencies. It is a well-known rare-earth (RE) host material for optical research and more recently has shown promising performance for quantum-engineered devices. In this paper, we report the first microwave characterization of the real permittivity tensor of a bulk YSO sample, as well as an investigation of the temperature dependence of the tensor components from 296 K down to 6 K. Estimated uncertainties were below 0.26%, limited by the precision of machining the cylindrical dielectric. Also, the electrical Q-factors of a few electromagnetic modes were recorded as a way to provide some information about the crystal losses over the temperature range. To solve the tensor components necessary for a biaxial crystal, we developed the multi-mode technique, which uses simultaneous measurement of low order whispering gallery modes. Knowledge of the permittivity tensor offers important data, essential for the design of technologies involving YSO, such as microwave coupling to electron and hyperfine transitions in RE doped samples at low temperatures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Longitudinal short-distance constraints for the hadronic light-by-light contribution to (g - 2) μ with large-N c Regge models

While the low-energy part of the hadronic light-by-light (HLbL) tensor can be constrained from data using dispersion relations, for a full evaluation of its contribution to the anomalous magnetic moment of the muon (g – 2) μ also mixed- and high-energy regions need to be estimated. Both can be addressed within the operator product expansion (OPE), either for configurations where all photon virtualities become large or one of them remains finite. Imposing such short-distance constraints (SDCs) on the HLbL tensor is thus a major aspect of a model-independent approach towards HLbL scattering. Here, we focus on longitudinal SDCs, which concern the amplitudes containing the pseudoscalar-pole contributions from π o , η, η'. Since these conditions cannot be fulfilled by a finite number of pseudoscalar poles, we consider a tower of excited pseudoscalars, constraining their masses and transition form factors from Regge theory, the OPE, and phenomenology. Implementing a matching of the resulting expressions for the HLbL tensor onto the perturbative QCD quark loop, we are able to further constrain our calculation and significantly reduce its model dependence. We find that especially for the π0 the corresponding increase of the HLbL contribution is much smaller than previous prescriptions in the literature would imply. Overall, we estimate that longitudinal SDCs increase the HLbL contribution by Δa$^{LSDC}_{μ}$ = 13(6) × 10 -11 . This number does not include the contribution from the charm quark, for which we find a$^{c–quark}_{μ}$ = 3(1) × 10 –11 .

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2019

Thermal tensor renormalization group simulations of square-lattice quantum spin models

In this work, we benchmark the well-controlled and numerically accurate exponential thermal tensor renormalization group (XTRG) in the simulation of interacting spin models in two dimensions. Finite temperature introduces a finite thermal correlation length ξ, such that for system sizes L >> ξ finite-size calculations actually simulate the thermodynamic limit. Here in this paper, we focus on the square lattice Heisenberg antiferromagnet (SLH) and quantum Ising models (QIM) on open and cylindrical geometries up to width W = 10 . We explore various one-dimensional mapping paths in the matrix product operator (MPO) representation, whose performance is clearly shown to be geometry dependent. We benchmark against quantum Monte Carlo (QMC) data, yet also the series-expansion thermal tensor network results. Thermal properties including the internal energy, specific heat, and spin structure factors, etc. are computed with high precision, obtaining excellent agreement with QMC results. XTRG also allows us to reach remarkably low temperatures. For SLH, we obtain an energy per site u$^*_g$ ≃ -0.6694 (4) and a spontaneous magnetization m$^*_S$ ≃ 0.30 ( 1 ) already consistent with the ground-state properties, which is obtained from extrapolated low-T thermal data on W ≤ 8 cylinders and W ≤ 10 open strips, respectively. We extract an exponential divergence versus T of the structure factor S (M), as well as the correlation length ξ, at the ordering wave vector M = ($π,π$) , which represents the renormalized classical behavior and can be observed over a narrow but appreciable temperature window, by analyzing the finite-size data by XTRG simulations. For the QIM with a finite-temperature phase transition, we employ several thermal quantities, including the specific heat, Binder ratio, as well as the MPO entanglement to determine the critical temperature $T_c$.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Cooling arbitrary near-critical systems using hyperbolic quenches

We describe a quench protocol that allows the rapid preparation of ground states of arbitrary interacting conformal field theories in 1+1 dimensions. We start from the ground state of a related gapped relativistic quantum field theory and consider sudden quenches along the spacelike trajectories t 2 – x 2 = $T$ $^{2}_{0}$ (parameterized by T 0 ) to a conformal field theory. Using only arguments of symmetry and conformal invariance, we show that the post-quench stress-energy tensor of the conformal field theory is uniquely constrained up to an overall scaling factor. Crucially, the geometry of the quench necessitates that the system approach the vacuum energy density over all space except the singular lines x = ±t. Here, the above arguments are verified using an exact treatment of the quench for the Gaussian scalar field theory (equivalently the Luttinger liquid), and numerically for the quantum O(N) model in the large-N limit. Additionally, for the Gaussian theory, we find in fact that even when starting from certain excited states, the quench conserves entropy, and is thus also suitable for rapidly preparing excited states. Our methods serve as a fast, alternative route to reservoir-based cooling to prepare quantum states of interest.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

An Incremental Tensor Train Decomposition Algorithm

We present a new algorithm for incrementally updating the tensor train decomposition of a stream of tensor data. This new algorithm, called the tensor train incremental core expansion (TT-ICE) improves upon the current state-of-the-art algorithms for compressing in tensor train format by developing a new adaptive approach that incurs significantly slower rank growth and guarantees compression accuracy. This capability is achieved by limiting the number of new vectors appended to the TT-cores of an existing accumulation tensor after each data increment. These vectors represent directions orthogonal to the span of existing cores and are limited to those needed to represent a newly arrived tensor to a target accuracy. We provide two versions of the algorithm: TT-ICE and TT-ICE accelerated with heuristics (TT-ICE*). Here, we provide a proof of correctness for TT-ICE and empirically demonstrate the performance of the algorithms in compressing large-scale video and scientific simulation datasets. Compared to existing approaches that also use rank adaptation, TT-ICE* achieves 57× higher compression and up to 95% reduction in computational time.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS1993

Hybrid simulations of collisionless ion tearing

Ion tearing in a thin collisionless neutral sheet is investigated using hybrid (particle ion, massless fluid electron) simulations in which dissipation effects are included through a model of the full electron pressure tensor in which self-consistently generated anisotropies are reduced via an isotropization time factor. The linear growth rates and ion dynamics are in qualitative agreement with linear theory and one-component simulations. The reconnection rate increases with the isotropization time.

Hesse, Michael↗
DOE OSTI2025

Tensorized Interior Radiative Heat Transfer for a Scalable and Calibrated Building Energy Simulator

Building energy simulation is a critical tool for developing and testing advanced control strategies, such as Reinforcement Learning (RL), to provide demand flexibility and affordable energy costs. The recently introduced Smart Buildings Control Suite (sbsim) provides a lightweight, scalable, and data-calibrated simulation environment based on a 2D finite-difference model. However, the initial model primarily focused on conductive and convective heat transfer, neglecting the significant impact of long-wave radiative heat exchange between interior surfaces. This paper presents a significant extension to the sbsim framework by incorporating a physically-grounded model for interior radiative heat transfer. Our primary contribution is the development and integration of a fully tensorized radiative heat transfer module, which preserves the computational efficiency and scalability of the original simulator. This was achieved by developing a pipeline for view factor calculation, including an algorithm to identify directly seeing surfaces within complex floor plans, and formulating the net radiation equations for efficient execution on modern hardware accelerators. We validate the numerical accuracy of our tensorized implementation by comparing its results against a traditional iterative approach, demonstrating identical outcomes. This enhancement increases the physical fidelity of sbsim, enabling more accurate training of RL agents for building energy optimization.

Ham, Sang woo↗
DOE OSTI2019

Efficient Ab Initio Auxiliary-Field Quantum Monte Carlo Calculations in Gaussian Bases via Low-Rank Tensor Decomposition

We describe an algorithm to reduce the cost of auxiliary-field quantum Monte Carlo (AFQMC) calculations for the electronic structure problem. The technique uses a nested low-rank factorization of the electron repulsion integral (ERI). While the cost of conventional AFQMC calculations in Gaussian bases scales as O(N 4 ), where N is the size of the basis, we show that ground-state energies can be computed through tensor decomposition with reduced memory requirements and subquartic scaling. Here, the algorithm is applied to hydrogen chains and square grids, water clusters, and hexagonal BN. In all cases, we observe significant memory savings and, for larger systems, reduced, subquartic simulation time.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2012

Ab initio study of {sup 2}H(d,{gamma}){sup 4}He, {sup 2}H(d,p){sup 3}H, and {sup 2}H(d,n){sup 4}He reactions and the tensor force

The {sup 2}H(d,p){sup 3}H, {sup 2}H(d,n){sup 3}He, and {sup 2}H(d,{gamma}){sup 4}He reactions at low energies are studied with realistic nucleon-nucleon interactions in an ab initio approach. The obtained astrophysical S-factors are all in very good agreement with experiment. The most important channels for both transfer and radiative capture are all found to dominate thanks to the tensor force.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2012

Inflationary predictions in scalar-tensor DBI inflation

The scalar-tensor Dirac-Born-Infeld (DBI) inflation scenario provides a simple mechanism to reduce the large values of the boost factor associated with single field models with DBI action, whilst still being able to drive 60 efolds of inflation. Using a slow-roll approach, we obtain an analytical expression for the spectral index of the perturbations and, moreover, determine numerically the regions of the parameter space of the model capable of giving rise to a power spectrum with amplitude and spectral index within the observed bounds. We find that regions that exhibit significant DBI effects throughout the inflationary period can be discarded by virtue of a blue-tilted spectral index, however, there are a number of viable cases — associated with a more red-tilted spectral index — for which the boost factor is initially suppressed by the effect of the coupling between the fields, but increases later to moderate values.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2015

Two-dimensional NMR measurement and point dipole model prediction of paramagnetic shift tensors in solids

A new two-dimensional Nuclear Magnetic Resonance (NMR) experiment to separate and correlate the first-order quadrupolar and chemical/paramagnetic shift interactions is described. This experiment, which we call the shifting-d echo experiment, allows a more precise determination of tensor principal components values and their relative orientation. It is designed using the recently introduced symmetry pathway concept. A comparison of the shifting-d experiment with earlier proposed methods is presented and experimentally illustrated in the case of {sup 2}H (I = 1) paramagnetic shift and quadrupolar tensors of CuCl{sub 2}⋅2D{sub 2}O. The benefits of the shifting-d echo experiment over other methods are a factor of two improvement in sensitivity and the suppression of major artifacts. From the 2D lineshape analysis of the shifting-d spectrum, the {sup 2}H quadrupolar coupling parameters are 〈C{sub q}〉 = 118.1 kHz and 〈η{sub q}〉 = 0.88, and the {sup 2}H paramagnetic shift tensor anisotropy parameters are 〈ζ{sub P}〉 = − 152.5 ppm and 〈η{sub P}〉 = 0.91. The orientation of the quadrupolar coupling principal axis system (PAS) relative to the paramagnetic shift anisotropy principal axis system is given by (α,β,γ)=((π)/2 ,(π)/2 ,0). Using a simple ligand hopping model, the tensor parameters in the absence of exchange are estimated. On the basis of this analysis, the instantaneous principal components and orientation of the quadrupolar coupling are found to be in excellent agreement with previous measurements. A new point dipole model for predicting the paramagnetic shift tensor is proposed yielding significantly better agreement than previously used models. In the new model, the dipoles are displaced from nuclei at positions associated with high electron density in the singly occupied molecular orbital predicted from ligand field theory.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

General tensor structure for electron scattering in terms of invariant responses

The general structure of semi-inclusive polarized electron scattering from polarized spin-1/2 targets is developed for use at all energy scales, from modest-energy nuclear physics applications to use in very high energy particle physics. The leptonic and hadronic tensors that enter in the formalism are constructed in a general covariant way in terms of kinematic factors that are frame dependent but model independent and invariant response functions which contain all of the model-dependent dynamics. In the process of developing the general problem the relationships to the conventional responses expressed in terms of the helicity components of the exchanged virtual photon are presented. For semi-inclusive electron scattering with polarized electrons and polarized spin-1/2 targets one finds that 18 invariant response functions are required, each depending on four Lorentz scalar invariants. Additionally it is shown how the semi-inclusive cross sections are related via integrations over the momentum of the selected coincidence particle and sums over open channels.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2019

Injection current in ferroelectric group-IV monochalcogenide monolayers

We study the injection current response tensor (also known as circular photogalvanic effect or ballistic current) in ferrolectric monolayer GeS, GeSe, SnS, and SnSe. We find that the injection current is perpendicular to the spontaneous in-plane polarization and could reach peak (bulk) values of the order of 10 10 AV –2 s –1 in the visible spectrum. The magnitude of the injection current is the largest reported in the literature to date for a two dimensional material. To rationalize the large injection current, we correlate the injection current spectrum with the joint density of states, electric polarization, strain, etc. We find that various factors such as anisotropy, in-plane polarization and wave function delocalization are important in determining the injection current tensor in these materials. Here, we also find that compression along the polar axis can increase the injection current (or change its sign), and hence strain can be an effective control knob for their nonlinear optical response. Conversely, the injection current can be a sensitive probe of the crystal structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2015

Determination of g-tensors of low-symmetry Nd{sup 3+} centers in LiNbO{sub 3} by rectification of angular dependence of electron paramagnetic resonance spectra

Two procedures for facilitation of line tracing and deciphering of complicated spectra of electron paramagnetic resonance (EPR) were developed: a correction of microwave frequencies for every orientation of external magnetic field on the base of known values of g-tensor components for a reference paramagnetic center and followed rectification of measured angular dependences using plots of effective deviation of g{sup 2}-factors of observed lines from effective g{sup 2}-factors of the reference center versus angles or squared cosines of angles describing magnetic field orientations. Their application to EPR spectra of nearly stoichiometric lithium niobate crystals doped with neodymium allowed identifying two axial and six different low-symmetry Nd{sup 3+} centers, to determine all components of their g-tensors, and to propose common divacancy models for a whole family of Nd{sup 3+} centers.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2012

Intrinsic frame inverse mass tensor as a function of {beta} and {gamma} in the Bohr Hamiltonian

Analytical expressions are derived for the components of the intrinsic frame inverse mass tensor of the Bohr Hamiltonian. These expressions contain parameters which are determined by the experimental data on the B(E2)'s and the excitation energies of the low-lying collective states. It is shown that the nondiagonal component of the intrinsic frame mass tensor has a small effect on the collective motion. It is shown also that the values of the B{sub {beta}{beta}}, B{sub {gamma}{gamma}} and the rotational mass coefficientB{sub 1} differ in the well-deformed nuclei by factor 3 or more.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS1973

A finite element tensor approach to plate buckling and postbuckling.

A practical finite element method is presented for geometrically nonlinear (von Karman) plate problems. Symmetric strain energy tensors provide an efficient formulation and solution, and allow the effects of initial imperfections to be considered. An unbalanced force iteration is employed, with the advantage that the time consuming Gauss decomposition needs to be performed only once. The convergence is controlled by an automatically computed relaxation factor, and this makes the method applicable in advanced stages of non-linearity. Several different triangular elements are used in explicitly deriving the required tensors.

Vos, R. G.↗