Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TIC”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

In-situ irradiation tolerance investigation of high strength ultrafine tungsten-titanium carbide alloy

Refining grain size and adding alloying elements are two complementary approaches for enhancing the radiation tolerance of existing nuclear materials. We present detailed in-situ irradiation research on defect evolution behavior and irradiation tolerance of ultrafine W-TiC alloys (thin foils) irradiated with 1 MeV Kr +2 at RT and 1073 K, and compare their overall performance to pure coarse grained tungsten. Loop Burgers vector was studied confirming the presence of <100> loops whose population increased at high temperature. Loop density, average loop area, and overall damage are reported as a function of irradiation dose revealing distinct defect evolution behavior from pure materials. The overall damage generally followed the average loop size trend, which decreased with time for both temperatures, but was higher at 1073 K and attributed to biased vacancy sink behavior of the TiC dispersoids evidenced by large vacancy clusters on their interfaces. By comparison, the overall loop and void damage in pure tungsten was larger by a factor of six and two, respectively. The improved irradiation damage resistance in the alloys is thus attributed to the effect of dispersoids in 1) the enhancement in annihilating defects and mutual defect recombination due to both dispersoids and a higher grain boundary density; 2) decreasing the loop mobility, causing shrinkage and annihilation of loop density, which was confirmed via in-situ video. Several mechanisms are illustrated to describe the performance of the complex alloy system. Finally, the results motivate further experimental and modeling research that aims to understand the many different phenomena occurring at different time scales.

36 MATERIALS SCIENCE↗

Mitigating keyhole pore formation by nanoparticles during laser powder bed fusion additive manufacturing

Keyhole pore formation is one of the most detrimental subsurface defects in the laser metal additive manufacturing process. However, effective ways to mitigate keyhole pore formation beyond tuning laser processing conditions during keyhole mode laser melting are still lacking. Here we report a novel approach to mitigate keyhole pore formation during laser powder bed fusion (LPBF) process by using stable nanoparticles. The critical keyhole depth for keyhole pore generation (i.e., the largest keyhole depth without keyhole pore formation) during LPBF of Al6061 increases from 246 µm to 454 µm (85% increase) after adding TiC nanoparticles. In-depth x-ray imaging studies and thermo-fluid dynamics simulation enable us to identify that two mechanisms work together to mitigate keyhole pore generation: (1) adding nanoparticles prevents the keyhole from collapsing by increasing the liquid viscosity to impede the protrusion development; (2) adding nanoparticles slows down the keyhole pore movement by increasing the liquid viscosity, resulting in the recapturing of the pore by the keyhole. We further demonstrate that adding TiC nanoparticles can also eliminate the keyhole fluctuation induced keyhole pore during LPBF of Al6061. Our research provides a potential way to mitigate keyhole pore formation for defect lean metal additive manufacturing.

36 MATERIALS SCIENCE↗

Thermal coupling-decoupling mechanism of heat transfer across van der Waals interfaces in n-eicosane

Progress toward improving thermal transport properties of n-eicosane, a promising phase change material for thermal energy storage near human body temperature, is hindered by lack of a general theoretical framework to model thermal interfacial conductance (TIC) of the van der Waals (vdW) force bonded molecular interfaces, which have little compositional/structural mismatch. Combining molecular dynamics simulations at temperatures up to the melting point and a time-domain analysis of interfacial heat currents in individual molecules, we unveil that (1) the heat flux across a molecular vdW interface has an alternating coupling-decoupling pattern at the single molecule level due to thermal fluctuations, and (2) the net heat transfer during the thermally coupled periods is orders of magnitude larger than that during the thermally decoupled periods. Furthermore, we demonstrate that a vdW interface's TIC correlates almost linearly with two atomistic-scale coupling-decoupling parameters: αc and σc, that represent the duration and strength of the thermal coupling, respectively. This thermal coupling-decoupling mechanism proposes a new paradigm that explicitly accounts for the effects of structural flexibility and dynamical fluctuation on heat transfer across molecular interfaces, and will likely provide new insights into modeling thermal transport properties in a wide-ranging soft materials, including self-assembled monolayers, paraffins or lipids.

42 ENGINEERING↗

Interaction of SO2 with Cu/TiC(0 0 1) and Au/TiC(0 0 1): Toward a New Family of DeSOx Catalysts

Experiments carried out under well-controlled conditions and density functional theory (DFT)-based calculations evidence that Cu and Au nanoparticles supported on a TiC(0 0 1) surface are quite active for the dissociation of the SO{sub 2} molecule. The Cu/TiC(0 0 1) and Au/TiC(0 0 1) systems cleave both S-O bonds of SO{sub 2} at a temperature of 150 K, displaying a reactivity much larger than that of TiC(0 0 1) or extended surfaces of bulk copper and gold. The origin of the high activity of the Cu/TiC(0 0 1) and Au/TiC(0 0 1) systems lies on the interaction between the C atoms of the substrate and the metal atoms of the supported particle, which results in a large polarization of its electron density. Experiments and theory consistently indicate that the Cu/TiC system is more active toward SO{sub 2} dissociation than the Au/TiC system. This type of systems may provide alternative and efficient DeSO{sub x} catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ceramic plasma-sprayed coating of melting crucibles for casting metal fuel slugs

Thermal cycling and melt reaction studies of ceramic coatings plasma-sprayed on Nb substrates were carried out to evaluate the performance of barrier coatings for metallic fuel casting applications. Thermal cycling tests of the ceramic plasma-sprayed coatings to 1450 degrees C showed that HfN, TiC, ZrC, and Y2O3 coating had good cycling characteristics with few interconnected cracks even after 20 cycles. Interaction studies by 1550 degrees C melt dipping tests of the plasma-sprayed coatings also indicated that HfN and Y2O3 do not form significant reaction layer between U–20 wt.% Zr melt and the coating layer. Plasma-sprayed Y2O3 coating exhibited the most promising characteristics among HfN, TiC, ZrC, and Y2O3 coating.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Modeling and Testing Miniature Torsion Specimens for SiC Joining Development Studies for Fusion

The international fusion community has designed a miniature torsion specimen for neutron irradiation studies of joined SiC and SiC/SiC composite materials. Miniature torsion joints based on this specimen design were fabricated using displacement reactions between Si and TiC to produce Ti3SiC2 + SiC joints with CVD-SiC and tested in torsion-shear prior to and after neutron irradiation. However, many of these miniature torsion specimens fail out-of-plane within the CVD-SiC specimen body, which makes it problematic to assign a shear strength value to the joints and makes it difficult to compare unirradiated and irradiated joint strengths to determine the effects of the irradiation. Finite element elastic damage and elastic-plastic damage models of miniature torsion joints are developed that indicate shear fracture is likely to occur within the body of the joined sample and cause out-of-plane failures for miniature torsion specimens when a certain modulus and strength ratio between the joint material and the joined material exists. The model results are compared and discussed with regard to unirradiated and irradiated joint test data for a variety of joint materials. The unirradiated data includes Ti3SiC2 + SiC/CVD-SiC joints with tailored joint moduli, and includes steel/epoxy and CVD-SiC/epoxy joints. The implications for joint data based on this sample design are discussed.

Joining:Fusion:Torsion:Modeling and Simulation↗

Ti{sub 2}GaC, Ti{sub 4}GaC{sub 3} and Cr{sub 2}GaC-Synthesis, crystal growth and structure analysis of Ga-containing MAX-phases M{sub n+1}GaC{sub n} with M=Ti, Cr and n=1, 3

Single crystals of Ga-containing MAX-phases Ti{sub 2}GaC, Ti{sub 4}GaC{sub 3}, and Cr{sub 2}GaC were grown from a metallic melt generated by an excess of Ga. This technique allows the crystal growth at different temperatures to control the product distribution. Compounds developed were Ti{sub 2}GaC and TiC at 1500 deg. C, and Ti{sub 2}GaC and Ti{sub 4}GaC{sub 3} at 1300 deg. C. Crystal structures were refined from single crystal data. Ti{sub 2}GaC and Cr{sub 2}GaC were previously known, and belong to the Cr{sub 2}AlC type as well as the solid solutions V{sub 2}Ga{sub 1-x}Al{sub x}C and Cr{sub 2}Ga{sub 1-x}Al{sub x}C. Ti{sub 4}GaC{sub 3} is one of the few 413-phases (P6{sub 3}/mmc, a=3.0690(4) A, c=23.440(5) A) and the first Ga-containing representative. The crystal structures of MAX-phases are intergrowths of layers of an intermetallic MGa in a hexagonal stacking sequence with carbidic layers (MC){sub n} of the NaCl type. The thickness of the layer depends from the value of n. The results of the structure refinements also demonstrate that also the structural details follow this description. - Graphical abstract: Single crystals of Ga-containing MAX-Phases (TiC){sub n}(TiGa) (n=1, 3) were grown from a metallic melt including and characterised by X-ray diffraction. Ti{sub 4}GaC{sub 3} is one of the few 413-phase and the first containing Ga.

36 MATERIALS SCIENCE↗

Microstructural study and densification analysis of hot work tool steel matrix composites reinforced with TiB{sub 2} particles

Hot work tool steels are characterized by good toughness and high hot hardness but are less wear resistant than other tooling materials, such as high speed steel. Metal matrix composites show improved tribological behavior, but not much work has been done in the field of hot work tool steels. In this paper TiB{sub 2}-reinforced hot work tool steel matrix composites were produced by spark plasma sintering (SPS). Mechanical alloying (MA) was proposed as a suited process to improve the composite microstructure. Density measurements and microstructure confirmed that MA promotes sintering and produces a fine and homogeneous dispersion of reinforcing particles. X-ray diffraction patterns of the sintered composites highlighted the formation of equilibrium Fe{sub 2}B and TiC, as predicted by thermodynamic calculations using Thermo-Calc® software. Scanning electron microscopy as well as scanning Kelvin probe force microscopy highlighted the reaction of the steel matrix with TiB{sub 2} particles, showing the formation of a reaction layer at the TiB{sub 2}-steel interface. Phase investigations pointed out that TiB{sub 2} is not chemically stable in steel matrix because of the presence of carbon even during short time SPS. - Highlights: • TiB{sub 2} reinforced steel matrix composites were produced by spark plasma sintering. • TiB{sub 2} was successfully dispersed in the steel matrix by mechanical alloying. • Steel and TiB{sub 2} react during sintering forming equilibrium Fe{sub 2}B and TiC. • The new phases were investigated by means of AFM, Volta potential and XRD analyses.

36 MATERIALS SCIENCE↗

Effects of high temperature treatment on microstructure and mechanical properties of laser-clad NiCrBSi/WC coatings on titanium alloy substrate

Laser-clad composite coatings on the Ti6Al4V substrate were heat-treated at 700, 800, and 900 °C for 1 h. The effects of post-heat treatment on the microstructure, microhardness, and fracture toughness of the coatings were investigated by scanning electron microscopy, X-ray diffractometry, energy dispersive spectroscopy, and optical microscopy. The wear resistance of the coatings was evaluated under dry reciprocating sliding friction at room temperature. The coatings mainly comprised some coarse gray blocky (W,Ti)C particles accompanied by the fine white WC particles, a large number of black TiC cellular/dendrites, and the matrix composed of NiTi and Ni{sub 3}Ti; some unknown rich Ni- and Ti-rich particles with sizes ranging from 10 nm to 50 nm were precipitated and uniformly distributed in the Ni{sub 3}Ti phase to form a thin granular layer after heat treatment at 700 °C. The granular layer spread from the edge toward the center of the Ni{sub 3}Ti phase with increasing temperature. A large number of fine equiaxed Cr{sub 23}C{sub 6} particles with 0.2–0.5 μm sizes were observed around the edges of the NiTi supersaturated solid solution when the temperature was further increased to 900 °C. The microhardness and fracture toughness of the coatings were improved with increased temperature due to the dispersion-strengthening effect of the precipitates. Dominant wear mechanisms for all the coatings included abrasive and delamination wear. The post-heat treatment not only reduced wear volume and friction coefficient, but also decreased cracking susceptibility during sliding friction. Comparatively speaking, the heat-treated coating at 900 °C presented the most excellent wear resistance. - Highlights: • TiC + WC reinforced intermetallic compound matrix composite coatings were produced. • The formation mechanism of the reinforcements was analyzed. • Two precipitates were generated at elevated temperature. • Cracking susceptibility and microhardness of the coatings were improved. • Post-heat treatment enhances wear resistance of the coatings.

36 MATERIALS SCIENCE↗

Titanium-deposition assisted brazing of SiC ceramics using inactive AgCu filler

Highlights: • Reliable joint of SiC ceramics was achieved via Titanium-deposition assisted brazing using inactive AgCu filler metal. • Microstructure characteristic of deposited-SiC brazed joint was investigated in detail. • Ti-deposition assisted brazing inhibited the formation of numerous intermetallic compounds. - Abstract: In this study, active titanium element film was designed to deposit on SiC ceramics directly to enhance the brazability of inactive AgCu brazing alloy on ceramics. The result showed the reliable joint was successfully obtained and the deposition of titanium film on SiC directly inhibited the formation of amounts of intermetallic compounds effectively in the brazing seam. Detailed interfacial microstructure of joint investigated by scanning electron microscope equipped with energy dispersive spectrum analysis and transmission electron microscope revealed that the interfacial reactions were based on deposited Ti film. The typical joint was SiC/TiCu + Ti{sub 2}Cu/TiC/Ti{sub 5}Si{sub 3} containing TiC particles/Ag(s,s) + Cu(s,s)/Ti{sub 5}Si{sub 3} containing TiC particles/TiC/TiCu + Ti{sub 2}Cu/SiC.

36 MATERIALS SCIENCE↗

Phase evolution during spark plasma sintering of novel Si3N4-doped TiB2–SiC composite

Highlights: • The effect of Si{sub 3}N{sub 4} addition on microstructure of TiB{sub 2}–SiC composite was studied. • Fully dense TiB{sub 2}-based composite was obtained by addition of SiC and Si{sub 3}N{sub 4}. • TiC, B{sub 4}C and SiO{sub 2} were formed in Si{sub 3}N{sub 4}-free and Si{sub 3}N{sub 4}-doped TiB{sub 2}–SiC ceramics. • TiN and BN were in-situ formed only in Si{sub 3}N{sub 4}-doped TiB{sub 2}–SiC sample. - Abstract: Spark plasma sintering process was employed to fabricate TiB{sub 2}–SiC and novel Si{sub 3}N{sub 4}-doped TiB{sub 2}–SiC ceramic composites at 1900 °C for 7 min under 40 MPa. The microstructural development of TiB{sub 2}-based composites was significantly influenced by the addition of SiC as a reinforcement phase and Si{sub 3}N{sub 4} as a sintering aid. Thermodynamic assessment, X-ray diffractometry, scanning electron microscopy and energy dispersive spectroscopy disclosed the in-situ formation of TiC, B{sub 4}C and SiO{sub 2} in both samples as well as TiN and BN in the Si{sub 3}N{sub 4}-doped TiB{sub 2}–SiC sample through the chemical reactions of SiC and Si{sub 3}N{sub 4} additives with the surface oxide impurities of TiB{sub 2} particles (TiO{sub 2} and B{sub 2}O{sub 3}). The elimination of harmful oxide layers and the in-situ formation various secondary phases had remarkable influences on the sinterability and final microstructure of TiB{sub 2}.

36 MATERIALS SCIENCE↗

Overview of advanced plasma-facing materials testing for Fusion Pilot Plants at DIII-D

Characterization and testing of advanced plasma-facing materials (PFMs) for Fusion Pilot Plants (FPP) is being conducted at the DIII-D National Fusion Facility through the ongoing two-year FPP Candidate Materials Thrust. Year one tested 17 novel materials utilizing the Divertor Materials Evaluation System (DiMES), with samples analyzed pre- and post-experiment via SEM, EDS, and confocal microscopy. Repeatable reference discharges were developed to ensure uniformity between experiments, including a new strike-point rastering scenario to provide more uniform heat/particle flux across DiMES during ELMing H-mode discharges. Various sample geometries and temperatures were used to achieve FPP-relevant conditions, including samples angled 10° towards the incident plasma flux and pre-heating up to 500 °C. The first exposure of liquid lithium (Li) capillary porous structures in a tokamak demonstrated uniform emission of Li vapor and suppression of Li droplets in H-mode when preheated to 350 °C. Dispersoid-strengthened W with 1 wt% TaC, TiC, and ZrC exposed to H-mode showed cracking and dispersoid ejection for all varieties except TiC, providing a clear down-selection. Ultra-high temperature ceramic materials TiB 2 and ZrB 2 showed minimal degradation under L-mode exposure. Silicon carbide (SiC) fiber composites showed arcing along edges, while CVD SiC remained pristine. Atmospheric plasma-sprayed W and SiC coatings endured H-mode exposure without macroscopic delamination; SiC exhibited granular ejection, while W showed increased outgassing. Additional W-based alloys were stress tested in H-mode, including Ni-based W heavy alloys, W f SiC f /W composites, W multi-principle element alloys, and functionally-graded W/SiC, to varying degrees of success.

DIII-D↗

Development of Ti 3 SiC 2 MAX phase tubular structures for solar receiver applications

Solar receiver tubes are key components of concentrating solar-thermal power (CSP) systems that harvest solar energy. For better efficiency, the Gen3 CSP receivers, which collect heat into a heat transfer fluid, require a temperature exceeding 700 °C during operation and need to perform under extreme conditions of high temperature and high thermal stress. Operators are seeking CSP designs using new high-temperature structural materials with high thermal conductivity and high creep resistance to achieve a design life of 30 years and thus help recover the plant capital cost sooner. MAX phase materials, which consist of an early transition metal element, an A-group element, and carbon or nitrogen, are expected to exhibit high creep resistance as well as high fracture toughness. Here, in this paper, we describe fabricating both (1) dense Ti 3 SiC 2 MAX phase disks and (2) short-length tubes using field-assisted sintering technology (FAST). First, the disk samples that we fabricated are fully dense and contain ≈90 % Ti 3 SiC 2 MAX phase materials and ≈10 % TiC phase materials. We determined a flexure strength of 519 ± 32 MPa by conducting a four-point bending test at room temperature with rectangular bar samples of ≈100 % density. The thermal conductivity of the Ti 3 SiC 2 MAX phase samples, measured by light flashing analysis, decreases linearly from a value of 41 W . m -1 . K -1 at room temperature to a value of 36 W . m -1 . K -1 at 650 °C. A solar reflectance measurement of the Ti 3 SiC 2 MAX phase revealed that, temperature increases from 400 to 1400 °C, thermal emittance increases from 0.39 to 0.49, while selectivity decreases from 1.8 to 1.4, respectively. Whereas the surface oxidized MAX phase samples after 100 h exposure to air at 1000 °C exhibit that of SiC. Next, we discuss fabrication of the crack-free Ti 3 SiC 2 MAX phase tubular structures accomplished by using FAST processing in graphite bedding. A Ti 3 SiC 2 MAX phase content of > 95 % with traceable ≈3% remaining TiC phase and ≈15 % porosity were demonstrated after high-temperature annealing. An average fracture strength of ≈250 MPa was determined with Ti 3 SiC 2 MAX phase tubes of ≈85 % density by diametral compression testing at room temperature. Our work demonstrated that using FAST processing to produce Ti 3 SiC 2 MAX phase tubular structures for CSP receiver applications is a viable approach.

14 SOLAR ENERGY↗

Properties of Ti/TiC Interfaces from Molecular Dynamics Simulations

Titanium carbide is used as a primary component in coating materials, thin films for electronic devices, and composites. Here, the structure of coherent and semicoherent interfaces formed between close-packed TiC (111) and Ti (0001) is investigated in classical molecular dynamics simulations. The forces on the atoms in the simulations are determined using a newly developed TiC potential under the framework of the third-generation charge optimized many-body (COMB 3 ) suite of potentials. The work of adhesion energies for the coherent interfaces is calculated and compared with the predictions of density functional theory calculations. In the case of relaxed semicoherent interfaces, a two-dimensional (2D) misfit dislocation network is predicted to form that separates the interface into different regions in which the positions of the atoms are similar to the positions at the corresponding coherent interfaces. After the interface is annealed at an elevated temperature, the climb of edge dislocations is activated which modifies the 2D misfit dislocation network and increases the work of adhesion. These findings can be used as inputs for sequential larger simulation models to understand and predict the macroscopic properties of TiC/Ti interfaces.

36 MATERIALS SCIENCE↗

Assessment of Blocking Contacts in Suppressing Polarization Effects in CsPbBr 3 Perovskite Detectors

The CsPbBr 3 perovskite has garnered significant attention as a room-temperature semiconductor for hard radiation detection due to straightforward synthesis, scalable crystal growth, low cost, and excellent energy resolution. However, despite these advantages, at ambient temperature, CsPbBr 3 devices may experience performance deterioration and irreversible failure due to “polarization” induced by electromigration of ions to electrical connections on the device. In this study, we tested several contact materials and their optimization deposition techniques to assess the stability of high-performance CsPbBr 3 γ-ray detectors. Metals, with low work functions (Ti, In, Sn, Sb, Pb, Bi, Al, Au, and TiC) and high-work-function (Au or Pt) contacts, were used to form different Schottky junctions using vacuum thermal evaporation, electron-beam evaporation, and sputtering methods. These detectors were tested in intermittent and continuous modes to assess their stability. Among the tested detectors, the Bi/CLB/Pt electrode configuration demonstrated superior stability, operating effectively for 11 months under periodic testing and 16 days under continuous testing. In contrast, other configurations functioned only for a few months under intermittent conditions. Upon incorporating a ~40-nm-thick TiC passivation layer on the anode side (Bi/TiC/CLB/Pt), the CLB device operated continuously for 36 days without degradation. In many cases, the failure mode of the devices was due to the degradation of the anode. Here, the chemical changes in the fresh and deteriorated anodes were characterized using scanning electron microscopy and energydispersive X-ray spectroscopy

CsPbBr3 perovskite↗

The Importance of Nanometric Passivating Films on Cathodes forLi - Air Batteries

Recently, there has been a transition from fully carbonaceous positive electrodes for the aprotic lithium oxygen battery to alternative materials and the use of redox mediator additives, in an attempt to lower the large electrochemical overpotentials associated with the charge reaction. However, the stabilizing or catalytic effect of these materials can become complicated due to the presence of major side-reactions observed during dis(charge). Here, we isolate the charge reaction from the discharge by utilizing electrodes prefilled with commercial lithium peroxide with a crystallite size of about 200-800 nm. Using a combination of S/TEM, online mass spectrometry, XPS, and electrochemical methods to probe the nature of surface films on carbon and conductive Ti-based nanoparticles, we show that oxygen evolution from lithium peroxide is strongly dependent on their surface properties. Insulating TiO2 surface layers on TiC and TiN - even as thin as 3 nm*can completely inhibit the charge reaction under these conditions. On the other hand, TiC, which lacks this oxide film, readily facilitates oxidation of the bulk Li2O2 crystallites, at a much lower overpotential relative to carbon. Since oxidation of lithium oxygen battery cathodes is inevitable in these systems, precise control of the surface chemistry at the nanoscale becomes of upmost importance.

Adams, Brian D.↗

Structural basis for bifunctional peptide recognition at human δ-opioid receptor

Bi-functional μ- and δ- opioid receptor (OR) ligands are potential therapeutic alternatives to alkaloid opiate analgesics with diminished side effects. We solved the structure of human δ-OR bound to the bi-functional δ-OR antagonist and μ-OR agonist tetrapeptide H-Dmt-Tic-Phe-Phe-NH 2 (DIPP-NH 2 ) by serial femtosecond crystallography, revealing a cis-peptide bond between H-Dmt and Tic. In summary, the observed receptor-peptide interactions are critical to understand the pharmacological profiles of opioid peptides, and to develop improved analgesics.

60 APPLIED LIFE SCIENCES↗

Control of electronic properties of 2D carbides (MXenes) by manipulating their transition metal layers

In this paper, a transition from metallic to semiconducting-like behavior has been demonstrated in two-dimensional (2D) transition metal carbides by replacing titanium with molybdenum in the outer transition metal (M) layers of M 3 C 2 and M 4 C 3 MXenes. The MXene structure consists of n + 1 layers of near-close packed M layers with C or N occupying the octahedral site between them in an [MX] n M arrangement. Recently, two new families of ordered 2D double transition metal carbides MXenes were discovered, M' 2 M"C 2 and M' 2 M" 2 C 3 – where M' and M" are two different early transition metals, such as Mo, Cr, Ta, Nb, V, and Ti. The M' atoms only occupy the outer layers and the M" atoms fill the middle layers. In other words, M' atomic layers sandwich the middle M"–C layers. Using X-ray atomic pair distribution function (PDF) analysis on Mo 2 TiC 2 and Mo 2 Ti 2 C 3 MXenes, we present the first quantitative analysis of structures of these novel materials and experimentally confirm that Mo atoms are in the outer layers of the [MC] n M structures. The electronic properties of these Mo-containing MXenes are compared with their Ti 3 C 2 counterparts, and are found to be no longer metallic-like conductors; instead the resistance increases mildly with decreasing temperatures. Density functional theory (DFT) calculations suggest that OH terminated Mo–Ti MXenes are semiconductors with narrow band gaps. Measurements of the temperature dependencies of conductivities and magnetoresistances have confirmed that Mo 2 TiC 2 T x exhibits semiconductor-like transport behavior, while Ti 3 C 2 T x is a metal. Finally, this finding opens new avenues for the control of the electronic and optical applications of MXenes and for exploring new applications, in which semiconducting properties are required.

36 MATERIALS SCIENCE↗