Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Surfaced Polymers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Surface relief grating in azo-polymer obtained for s-s polarization configuration of the writing beams

The paper reports on the formation of the surface relief gratings in thin films of the azobenzene-functionalized polymer. We evidence that the efficiency of the formation process of the surface relief gratings strongly depends on the length of the main polymer chains in the case of the s-s configuration. The explanation of this relationship is given and is based on the revealing of the differences in the ability of the motion of the main chain which is strictly related to its length.

36 MATERIALS SCIENCE↗

Preparation of transition metal nanoparticles and surfaces modified with (co)polymers synthesized by RAFT

A new, facile, general one-phase method of generating thiol-functionalized transition metal nanoparticles and surfaces modified by (co)polymers synthesized by the RAFT method is described. The method includes the steps of forming a (co)polymer in aqueous solution using the RAFT methodology, forming a colloidal transition metal precursor solution from an appropriate transition metal; adding the metal precursor solution or surface to the (co)polymer solution, adding a reducing agent into the solution to reduce the metal colloid in situ to produce the stabilized nanoparticles or surface, and isolating the stabilized nanoparticles or surface in a manner such that aggregation is minimized. The functionalized surfaces generated using these methods can further undergo planar surface modifications, such as functionalization with a variety of different chemical groups, expanding their utility and application.

36 MATERIALS SCIENCE↗

Enhanced heat transfer through filler-polymer interface by surface-coupling agent in heat-dissipation material: A non-equilibrium molecular dynamics study

Developing a composite material of polymers and micrometer-sized fillers with higher heat conductance is crucial to realize modular packaging of electronic components at higher densities. Enhancement mechanisms of the heat conductance of the polymer-filler interfaces by adding the surface-coupling agent in such a polymer composite material are investigated through the non-equilibrium molecular dynamics (MD) simulation. A simulation system is composed of α-alumina as the filler, bisphenol-A epoxy molecules as the polymers, and model molecules for the surface-coupling agent. The inter-atomic potential between the α-alumina and surface-coupling molecule, which is essential in the present MD simulation, is constructed to reproduce the calculated energies with the electronic density-functional theory. Through the non-equilibrium MD simulation runs, we find that the thermal resistance at the interface decreases significantly by increasing either number or lengths of the surface-coupling molecules and that the effective thermal conductivity of the system approaches to the theoretical value corresponding to zero thermal-resistance at the interface. Detailed analyses about the atomic configurations and local temperatures around the interface are performed to identify heat-transfer routes through the interface.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Adhesion Peptide Immobilization on Electrospun Polymers: a Photoelectron Spectroscopy Study

The immobilization of an oligopeptide, mimicking the adhesion sequence of fibronectin, on the surface of polymer films prepared by electrospinning was investigated by XPS spectroscopy. Films of polycaprolactone (PCL) and poly(l-lactide-caprolactone)[P(LLA-CL)] were prepared by electrospinning onto aluminium substrates. A modified adhesion peptide containing a photoreactive group was immobilized on the surface of the polymer nanofibers by incubation in peptide solution and subsequent UV irradiation. XPS analysis yield evidence of successful peptide immobilization on the polymer surface; the amount of immobilized peptide increases with the concentration of the mother solution.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Electronic materials high-T(sub c) superconductivity polymers and composites structural materials surface science and catalysts industry participation

The fifth year of the Center for Advanced Materials was marked primarily by the significant scientific accomplishments of the research programs. The Electronics Materials program continued its work on the growth and characterization of gallium arsenide crystals, and the development of theories to understand the nature and distribution of defects in the crystals. The High Tc Superconductivity Program continued to make significant contributions to the field in theoretical and experimental work on both bulk materials and thin films and devices. The Ceramic Processing group developed a new technique for cladding YBCO superconductors for high current applications in work with the Electric Power Research Institute. The Polymers and Composites program published a number of important studies involving atomistic simulations of polymer surfaces with excellent correlations to experimental results. The new Enzymatic Synthesis of Materials project produced its first fluorinated polymers and successfully began engineering enzymes designed for materials synthesis. The structural Materials Program continued work on novel alloys, development of processing methods for advanced ceramics, and characterization of mechanical properties of these materials, including the newly documented characterization of cyclic fatigue crack propagation behavior in toughened ceramics. Finally, the Surface Science and Catalysis program made significant contributions to the understanding of microporous catalysts and the nature of surface structures and interface compounds.

Source record↗

Communication: Rate coefficients of the H + CH{sub 4} → H{sub 2} + CH{sub 3} reaction from ring polymer molecular dynamics on a highly accurate potential energy surface

The ring polymer molecular dynamics (RPMD) calculations are performed to calculate rate constants for the title reaction on the recently constructed potential energy surface based on permutation invariant polynomial (PIP) neural-network (NN) fitting [J. Li et al., J. Chem. Phys. 142, 204302 (2015)]. By inspecting convergence, 16 beads are used in computing free-energy barriers at 300 K ≤ T ≤ 1000 K, while different numbers of beads are used for transmission coefficients. The present RPMD rates are in excellent agreement with quantum rates computed on the same potential energy surface, as well as with the experimental measurements, demonstrating further that the RPMD is capable of producing accurate rates for polyatomic chemical reactions even at rather low temperatures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ultraviolet and infrared femtosecond laser induced periodic surface structures on thin polymer films

This work demonstrates the formation of femtosecond laser induced periodic surface structures (LIPSS) by multipulse irradiation with the fundamental and 3rd harmonic of a linearly polarized Ti:sapphire laser (795 and 265 nm) on thin films of the polymers poly (ethylene terephthalate), poly (trimethylene terephthalate), and poly (carbonate bisphenol A) prepared by spin-coating. LIPSS, inspected by atomic force microscopy, are formed upon multiple pulse UV and IR irradiation with wavelength-sized period in a narrow range of fluences below the ablation threshold. Control and tunability of the size and morphology of the periodic structures become thus possible ensuring photochemical integrity of polymer films.

36 MATERIALS SCIENCE↗

Effect of Fluorosurfactant on Capillary Instabilities in Nanoimprinted Polymer Patterns

Surface forces play a paramount role in most aspects of Nanoimprint Lithography. In particular, subjecting nanoimprinted patterns to moderate heating allows surface tension to smooth out undesirable roughness and defects in the patterns, but this thermal reflow treatment can induce structural decay or even collapse of the patterns by capillary instability if this process is not carefully controlled. Adhesion between the mold and polymer film can also cause the imprinted structure to tear or fracture. Fluorinated surfactants (FS) are attractive for reducing mold adhesion, yet the effects of these additives on nanostructure stability during thermal reflow are not well understood. Here we present thermal stability studies of line-space grating patterns created by Thermal Embossing Nanoimprint Lithography (TENIL) on model polystyrene (PS) films with FS additives. As expected by energy considerations, FS segregates to the air interface where it seems to facilitate mold release. This also reduces the surface energy and thus reduces the driving force for pattern "slumping" (height decay). However, the beneficial effects of the surfactant are counterbalanced by the fact that the FS decreases the effective film viscosity, which accelerates nanopattern leveling. The net effect is that the pattern height decay is strongly a function of FS concentration. This enhanced film fluidity in the presence of FS also makes the pattern more susceptible to an undulatory capillary instability under thermal reflow conditions. Surface phase segregation of FS and PS is also observed in conjunction with both slumping and lateral capillary instabilities, which may be useful for producing chemically patterned surfaces.

36 MATERIALS SCIENCE↗

Distribution of Chains in Polymer Brushes Produced by a “Grafting From” Mechanism

The molecular weight and polydispersity of the chains in a polymer brush are critical parameters determining the brush properties. However, the characterization of polymer brushes is hindered by the vanishingly small mass of polymer present in brush layers. In this study, in order to obtain sufficient quantities of polymer for analysis, polymer brushes were grown from high surface area fibrous nylon membranes by ATRP. We synthesized the brushes with varying surface initiator densities, polymerization times, and amounts of sacrificial initiator, then cleaved from the substrate, and analyzed by GPC and NMR. Characterization showed that the surface-grown polymer chains were more polydisperse and had lower average molecular weight compared to solution-grown polymers synthesized concurrently. Furthermore, the molecular weight distribution of the polymer brushes was observed to be bimodal, with a low molecular weight population of chains representing a significant mass fraction of the polymer chains at high surface initiator densities. Moreover, the origin of this low MW polymer fraction is proposed to be the termination of growing chains by recombination during the early stages of polymerization, a mechanism confirmed by molecular dynamics simulations of brush polymerization.

36 MATERIALS SCIENCE↗

Anomalous Confinement Slows Surface Fluctuations of Star Polymer Melt Films

The unusually large film thickness at which confinement effects manifest themselves in surface fluctuations of unentangled four-arm star polymers has been defined using film thicknesses from 10 R g to 107 R g . For 15k four-arm star polystyrene (SPS) confinement appears at a thickness between 112 nm (40 R g ) and 72 nm (26 R g ), which is remarkably larger than the thicknesses at which confinement appears for unentangled 6k linear (<15 nm, <7 R g ) and 6k and 14k cyclic (24 nm and 22 nm, respectively) polystyrenes. Data for 15k star films can be rationalized using a two-layer model with a 17 nm (6 R g ) thick highly viscous layer at the substrate, which is significantly thicker than the 1 R g thick “irreversibly adsorbed” layer. For a 29 nm (10 R g ) thick film more striking confinement occurs due to the combined influence of both interfaces. 2 Here, these results underscore the extraordinary role long-chain branching plays in dictating surface fluctuations of thin films.

36 MATERIALS SCIENCE↗

Composite Structured Surfaces for Durable Dropwise Condensation

Dropwise condensation of steam on hydrophobic substrates has a 10X higher heat transfer coefficient compared to filmwise condensation. To promote dropwise condensation, low surface energy hydrophobic coatings (polymers) are typically utilized. The low intrinsic thermal conductivity (k < 1 W/(m · K)) of polymers, coupled with high heat transfer coefficient of dropwise condensation (100 kW/(m 2 · K)), necessitates that the coating be thin (< 1µm) in order to avoid reducing the overall heat exchanger conductance. However, thin polymeric films easily degrade. The two opposing requirements result in the need for optimization between the durability (thick coating) and the heat transfer (thin coating). To enable high thermal conductivity in thicker coatings, we develop metal-polymer structured surfaces. By using porous structures as inter-connected heat-conducting backbones that are filled with hydrophobic materials, we enable tuning of the coating effective thermal conductivity and surface energy. Three metal structures were studied; micro/nanowires, inverse opals, and sintered spheres. Heat transfer performance was calculated using three-dimensional finite element method simulations with two distinct boundary conditions; convection at the walls and isothermal walls. Interestingly, the overall conductance shows up to 40% difference depending on the boundary condition used in calculating the composite coating effective thermal conductivity. We use our model to predict the heat transfer performance as a function of metal fraction by volume and by surface area for condensation. By coupling our thermal simulations with a previously verified analytical model for predicting wetting behavior on heterogeneous surfaces, we propose a regime map to predict dropwise-to-filmwise transition. Furthermore, our work not only forms a starting point for the development of durable dropwise condensing surfaces, it identifies important considerations needed for computing effective thermal conductivity of composites.

42 ENGINEERING↗

Size and Structure Effects of Carbon-Supported Ruthenium Nanoparticles on Waste Polypropylene Hydrogenolysis Activity, Selectivity, and Product Microstructure

Hydrogenolysis of plastic waste using Ru-based catalysts is promising for deconstructing polyolefins into lower molecular weight products. Yet, the effect of catalyst atomic structure and size on activity and product selectivity is poorly understood. Herein, we expose the effect of metal particle size and atomic structure on isotactic-polypropylene (i-PP) hydrogenolysis over Ru supported on carbon. Despite similar molecular weight distributions of solid and liquid products, their physical properties are distinct due to different chain regio-irregular CH3 sequences of steric pentads containing racemo configurations. We propose that i-PP hydrogenolysis entails an interplay of C–C bond scission and stereoisomerization. The active site’s local electronic environment and structure dictate the former, whereas polymer–catalyst surface interactions creating suitable polymer conformations control the latter. C–C scission and stereoisomerization are structure-sensitive. Small, disordered nanoclusters are effective in C–C bond scission, whereas larger metal nanoparticles promote stereoisomerization. Finally, we hypothesize that a heterogeneous distribution of metal active sites is essential for deconstruction and product (lubricant base oil) quality control.

36 MATERIALS SCIENCE↗

Nanoscale Particle Motion Reveals Polymer Mobility Gradient in Nanocomposites

Polymer mobility near nanoparticle surfaces has been extensively discussed; however, direct experimental observation in the nanocomposite melts has been a difficult task. Here, by taking advantage of large dynamical asymmetry between the miscible matrix and surface-bound polymers, we highlighted their interphases and studied the resulting effect on the nanoparticle relaxation using X-ray photon correlation spectroscopy. Here, the local mobility gradient is signified by an unprecedented increase in the relaxation time at length scales on the order of polymer radius of gyration. The effect is accompanied by a transition from simple diffusive to subdiffusive behavior in accord with viscous and entangled dynamics of polymers in the matrix and in the interphase, respectively. Our results demonstrate that the nanoparticle-induced polymer mobility changes in the interphases of nanocomposite melts can be extracted from the length-scale-dependent slow particle motion.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Atomic Origins of the Self-Healing Function in Cement–Polymer Composites

Motivated by recent advances in self-healing cement and epoxy polymer composites, we present a combined ab initio molecular dynamics and sum frequency generation (SFG) spectroscopy study of a calcium-silicate-hydrate/polymer interface. On stable, low-defect surfaces, the polymer only weakly adheres through coordination and hydrogen bonding interactions and can be easily mobilized towards defected surfaces. Conversely, on fractured surfaces, the polymer strongly anchors through ionic Ca-O bonds resulting from the deprotonation of polymer hydroxyl groups. In addition, polymer S-S groups are turned away from the cement/polymer interface, allowing for the self-healing function within the polymer. The overall elasticity and healing properties of these composites stem from a flexible hydrogen bonding network that can readily adapt to surface morphology. The theoretical vibrational signals associated with the proposed cement-polymer interfacial chemistry were confirmed experimentally by SFG spectroscopy.

ab initio molecular 8 dynamics↗

Exponential time differencing methods with Chebyshev collocation for polymers confined by interacting surfaces

We present a fast and accurate numerical method for the self-consistent field theory calculations of confined polymer systems. It introduces an exponential time differencing method (ETDRK4) based on Chebyshev collocation, which exhibits fourth-order accuracy in temporal domain and spectral accuracy in spatial domain, to solve the modified diffusion equations. Similar to the approach proposed by Hur et al. [Macromolecules 45, 2905 (2012)], non-periodic boundary conditions are adopted to model the confining walls with or without preferential interactions with polymer species, avoiding the use of surface field terms and the mask technique in a conventional approach. The performance of ETDRK4 is examined in comparison with the operator splitting methods with either Fourier collocation or Chebyshev collocation. Numerical experiments show that our exponential time differencing method is more efficient than the operator splitting methods in high accuracy calculations. This method has been applied to diblock copolymers confined by two parallel flat surfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

X-ray optics for laser-plasma sources: Aplications of intense SXR and EUV radiation pulses

In this work we present a short review of SXR and EUV optics that have been designed and developed for experiments concerning material processing and imaging, using a laser-plasma radiation source based on a gas puff target. Three different kinds of mirrors employed as the EUV collectors are presented: the grazing incidence axisymmetrical ellipsoidal mirror, the grazing incidence multifoil mirror, and the ellipsoidal mirror with Mo/Si multilayer coating. Experiments concerning characterization of the mirrors were performed using EUV radiation from Kr or Xe plasmas produced in a double stream gas puff target irradiated with Nd:YAG laser pulses (4ns, 0.8 J, 10 Hz). Intensity of the focused radiation was sufficient for micromachining of organic polymers and surface modification of organic and inorganic solids. Different kinds of micro-and nanostructures created in near-surface layers of different kinds polymers were obtained. Significant differences were revealed in XPS spectra acquired for irradiated and not irradiated polymers.

36 MATERIALS SCIENCE↗

Mean-Field Ring Polymer Rates Using a Population Dividing Surface

Mean-field Ring Polymer Molecular Dynamics (MF-RPMD) offers a computationally efficient method for the simulation of reaction rates in multi-level systems. Previous work has established that, to model a nonadiabatic state-to-state reaction accurately, the dividing surface must be chosen to explicitly sample kinked ring polymer configurations where at least one bead is in a different electronic state than the others. Building on this, we introduce a population difference coordinate and a kink-constrained dividing surface, and we test the accuracy of the resulting mean-field rate theory on a series of bilinear coupling model systems. Here, we demonstrate that this new MF-RPMD rate approach is efficient to implement and quantitatively accurate for models over a wide range of driving forces, coupling strengths, and temperatures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗