Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Spinel”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Structurally Regenerable High Entropy Aluminate Spinel Catalysts for Dry Reforming of Methane

The dry reforming of methane reaction is a promising means to convert two potent greenhouse gases, methane and carbon dioxide, into industrially valuable synthesis gas. However, the presence of reducing gases and high operating temperatures degrade conventional nickel catalysts via excessive coke formation and particle sintering. These catalysts are not readily regenerated because the oxidative heat treatments employed to remove coke further promote active particle sintering. In this work, we designed high entropy aluminate spinel oxides (MAl 2 O 4 where M = Co, Mg, Ni, and divalent site vacancies in nominal equimolar concentration) as selective and regenerable reforming catalysts. Under reaction conditions, reducible nickel and cobalt cations exsolved from the spinel lattice to form highly selective bimetallic particles on the oxide surface. Instead of sintering, these particles uniquely redissolved back into the aluminate lattice upon reoxidation and regained the original spinel structure. This phenomenon is ascribed to entropic stabilization, wherein an increase in configurational entropy creates a thermodynamic driving force for redispersing supported metal particles back into the multi‐cationic oxide structure. During the dry reforming reaction, nickel atoms similarly exsolved from a NiAl 2 O 4 sample and reduced to form metallic nickel particles. However, subsequent oxidation of this sample promoted sintering and oxidation of the nickel particles to an inactive state. High entropy materials thus provide a unique mechanism of regeneration, which is inaccessible in conventional catalysts.

coke deposition↗

Pulse Cathodoluminescence of the Impurity Centers in Ceramics Based on the MgAl{sub 2}O{sub 4} Spinel

The spectral and luminescence decay kinetics of magnesium aluminate spinel ceramics prepared by spark plasma sintering (SPS) and the starting nanopowders were studied. It was demonstrated that two types of luminescence in spinel ceramics can be observed after pulse e-beam excitation. The first type is due to intrinsic defects, and the second type due to Cr{sup 3+} and Mn{sup 2+} ions. It was shown that the luminescence decay kinetics for Cr{sup 3+} and Mn{sup 2+} impurity ions can be approximated by the sum of two exponents. The decay times for the Cr{sup 3+} ion are 35 and 409 ns, for the Mn{sup 2+} ion are 29 and 340 ns. High-temperature exposure during SPS synthesis does not lead to a change in the nearest surroundings of impurity ions. In the luminescence spectra of ceramic and powder samples the intensity ratio changes of intrinsic and impurity centers is associated with strong diffuse scattering of light for spinel nanopowders.

36 MATERIALS SCIENCE↗

Effect of transition metal substitution on elastoplastic properties of LiMn 2 O 4 spinel

LiMn 2 O 4 (LMO) derivatives partially substituted with transition metals (e.g., Ni) have received attention for their higher energy density achieved at higher charge voltage than pure LMO, and may be attractive cathode candidates for emerging all solid state batteries. Accurate mechanical properties of these high voltage spinels are required for prediction of electrode and electrolyte fracture that may compromise battery lifetime and performance. In this work, we quantified the Young’s elastic modulus E and hardness H for LMO, LiMn 1.5 Ni 0.5 O 4 (LMNO), and LiMn 1.5 Ni 0.42 Fe 0.08 O 4 (LMNFO) spinel microparticles via instrumented grid nanoindentation. Elastic modulus E and hardness H increased by more than 40% (up to 145 and 11 GPa, respectively) as a result of Ni or Ni/Fe substitution; such substitution also reduces the lattice parameter and increases the oxidization state of Mn. In conclusion, these results demonstrate how changes in transition metal occupancy can significantly affect the mechanical properties of LMO spinel, and provide critical parameters for designing against fracture in all solid state batteries.

36 MATERIALS SCIENCE↗

Enhanced Magneto-optical and Photocatalytic Properties of Ferromagnetic Mg{sub 1−y}Ni{sub y}Fe{sub 2}O{sub 4} (0.0 ≤ y ≤ 1.0) Spinel Nano-ferrites

Spinel Mg{sub 1−y}Ni{sub y}Fe{sub 2}O{sub 4} (0.0 ≤ y ≤ 1.0) ferrite magnetic nanoparticles (MNPs) were synthesized by a sol-gel combustion method using urea as the reducing agent/fuel. Powder X-ray diffraction (XRD) analysis revealed the formation of cubic spinel Mg{sub 1−y}Ni{sub y}Fe{sub 2}O{sub 4} powders and confirmed pure crystalline phase and the average crystalline size of 21.25 to 17.04 nm. Functional group bonds between metal and oxygen (M–O) were confirmed by Fourier transform infrared (FT-IR) spectra. The microstructure of the powders was recorded by high-resolution scanning electron microscope (HR-SEM) and confirmed the particle-like surface morphology with smaller agglomeration, due to the magnetic interaction of the particles. Energy-dispersive X-ray (EDX) results showed the composition of the expected elements and confirmed the phase purity of the products. Vibrating sample magnetometer (VSM) technique recorded at room temperature was used to analyse the magnetic properties of the samples and the hysteresis loops showed the ferromagnetic behaviour. Moreover, the samples Mg{sub 1−y}Ni{sub y}Fe{sub 2}O{sub 4} NPs were tested for the photocatalytic degradation (PCD) of methylene blue (MB) dye and the sample y = 0.6 showed maximum degradation efficiency (96.83 %), due to the smaller particle size with higher surface area than other compositions. Furthermore, spinel Mg{sub 1−y}Ni{sub y}Fe{sub 2}O{sub 4} nano-photocatalysts can be reused several times without change of its catalytic activity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A new interatomic potential for mixed Mg-Al-Ga-In spinels

While density functional theory (DFT) has become the de facto approach for accurate simulation of materials at the atomic scale, there are many aspects of materials that are simply out of reach of DFT methods. In particular, finite temperature properties such as diffusivities, the structure and properties of grain boundaries and interfaces, and the study of defect properties in complex alloys are computationally challenging for DFT methods. Recently, a new class of spinels in which three cations order over two sublattices was discovered. In order to predict the properties of these types of structures, classical potentials are a must. Here, in this work, we derive a new classical potential for Mg-bearing spinels in which the B cations are Al, Ga, and/or In. The potential does well in describing the DFT energetics of various spinel structures as a function of chemistry and inversion. In particular, it reproduces the thermodynamically favorable MgAlGaO 4 structure while correctly predicting that neither MgAlInO 4 nor MgGaInO 4 are stable. Further, it reproduces physical trends in elastic properties as compared against experiment.

36 MATERIALS SCIENCE↗

Au on MgAl2O4 spinels: The effect of support surface properties in glycerol oxidation

Here we investigated the properties of Au nanoparticles, prepared via three different techniques and supported on three different MgAl2O4 spinels. The surface composition and area of the spinel plays an important role in determining the selectivity of the catalyst in the selective oxidation of glycerol. it was found that aluminum rich surfaces enhance the C-C bond cleavage reaction for large gold particles which is opposite of what is normally observed for large clusters which typically show no C-C cleavage. We also report that similarly sized AuNPs on the different MgAl2O4 spinels with the same surface Al/Mg ratio, show a similar selectivity; however activity depends on surface area.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High-pressure Cr 3+ luminescence and Raman spectroscopy of a natural MgAl 2 O 4 spinel to ∼60 GPa

Cr 3+ luminescence and Raman spectroscopy of a natural spinel were collected up to ∼60 GPa at ambient temperature using a Ne or a 4:1 methanol-ethanol mixture as the pressure transmitting media. Here, in the Ne experiments above ∼40 GPa, and in the 4:1 methanol–ethanol experiments above ∼20 GPa, all luminescence emission lines shift non-linearly, and by 59 GPa the spectra are broadened and are significantly changed. The Raman modes shift smoothly to higher frequencies with pressure, with a slight change in slope above 40 GPa, with no kinks or discontinuities. By ∼60 GPa, only the most intense Eg mode remains resolvable, appearing broadened and reduced in intensity. The change in slope in the Raman modes and luminescence bands may be due to a change in the compression mechanism of spinel. When spinel was decompressed from 40 GPa all changes were fully reversible; however, when the samples were decompressed from 54 to 60 GPa in Ne and 59 GPa in 4:1 methanol-ethanol the spectra were irreversibly changed. The change in the luminescence spectra and the Raman spectra are likely due to a pressure induced disorder of the anions or partial amorphization between 40 and 60 GPa.

Cr3+↗

The effect of high-level waste glass composition on spinel liquidus temperature

Spinel crystals precipitate in high-level waste glasses containing Fe, Cr, Ni , Mn, Zn, and Ru. The liquidus temperature (TL) of spinel as the primary crystallization phase is a function of glass composition and the spinel solubility (c0) is a function of both glass composition and temperature (T). Previously reported models of TL as a function of composition are based on TL measured directly, which requires laborious experimental procedures. Viewing the curve of c0 versus T as the liquidus line allows a significant broadening of the composition region for model fitting. This paper estimates TL as a function of composition based on c0 data obtained with the X-ray diffraction technique.

crystal fraction↗

Improvement by heating of the electronic conductivity of cobalt spinel phases, electrochemically synthesized in various electrolytes

The nature of the alkaline electrolyte (based on KOH, NaOH, LiOH), in which Co{sub 3}O{sub 4} spinel type phases are synthesized by electrooxidation of CoO, is shown to play a key role on the composition, the structure and the electronic conductivity of the materials. In the materials, prepared in pure LiOH electrolyte or in mixed ternary electrolyte (KOH, NaOH, LiOH), Co{sup 4+} ions are present in the octahedral framework, which entails electronic delocalization in the cobalt T{sub 2g} band and a high conductivity. The structure of the sample, synthesized in KOH, is on the opposite closer to that of ideal Co{sub 3}O{sub 4}, with only Co{sup 3+} in the octahedral sublattice, which leads to a semi-conducting behavior. Whatever the initial material, a thermal treatment induces an increase of the Co{sup 4+}/Co{sup 3+} ratio in the octahedral network, resulting in a significant increase of the electronic conductivity. - Graphical abstract: In 'Co{sub 3}O{sub 4}' type spinel phases synthesized by eleectrooxidation, the nature of the alkaline electrolyte allows to monitor the amounts of hydrogen and lithium, inserted in spinel framework and therefore the electronic conductivity. Whatever the initial synthesis electrolyte, a moderate thermal treatment of the materials induces a significant increase of the electronic conductivity, due to a structural reorganization (illustrated by the evolution of the cell parameter) and an increase of the Co{sup 4+}/Co{sup 3+} ratio in the octahedral framework.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and Mg 2+ deintercalation in manganese spinel nanocrystals

Transition metal oxides are promising materials as cathodes for divalent batteries with high capacity under high voltage. A major challenge is the sluggish kinetics of intercalation of divalent cations into the oxide host. Tailoring of the size, composition and crystal structure of oxides is a necessary strategy to alleviate these barriers, which challenges our control of their synthesis. In this work, we selectively synthesize spinel-type Mg x Mn 3-x O 4 nanocrystals with different Mg/Mn ratios and investigate their ability to electrochemically shuttle Mg 2+ ions. Crystal-chemical characterization of the reaction outcomes was conducted with X-ray diffraction, X-ray absorption spectroscopy, electron microscopy, and elemental analysis. Both 5 nm thick MgMn 2 O 4 nanosheets and 10 nm Mg 0.41 Mn 2.59 O 4 nanocubes underwent reversible Mg 2+ deintercalation, yet no obvious reaction was observed in 60 nm Mg 1.2 Mn 1.8 O 4 nanocubes. Our results suggest that both the size of the spinel nanocrystals and the Mg/Mn ratios play a role in the observed behaviour. The advances in the synthesis of spinel oxide nanocrystals achieved, and their correlation with Mg 2+ deintercalation, pave the way toward the precise synthesis of multivalent cathode materials that fundamentally overcome barriers to practical application.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Studies on densification, mechanical, micro-structural and structure–properties relationship of magnesium aluminate spinel refractory aggregates prepared from Indian magnesite

The present work intends to study the development of magnesium aluminate spinel aggregates from Indian magnesite in a single firing stage. The raw magnesite has been evaluated in terms of chemical analysis, differential thermal analysis, thermogravimetric analysis, infrared spectroscopy, and X-ray diffraction. The experimental batch containing Indian magnesite and calcined alumina has been sintered in the temperature range of 1550 °C–1700 °C. The sintered material has been characterized in terms of physico-chemical properties like bulk density, apparent porosity, true density, relative density and thermo-mechanical/mechanical properties like hot modulus of rupture, thermal shock resistance, cold modulus of rupture and structural properties by X-ray diffraction in terms of phase identification and evaluation of crystal structure parameters of corresponding phases by Rietveld analysis. The microstructures developed at different temperatures have been analyzed by field emission scanning electron microscope study and compositional analysis of the developed phase has been carried out by energy dispersive X-ray study. - Highlights: • The studies have been done to characterize the developed magnesium aluminate spinel. • The studies reveal correlation between refractory behavior of spinel and developed microstructures. • The studies show the values of lattice parameters of developed phases.

36 MATERIALS SCIENCE↗

Synthesis and characterization of nanocrystalline MgAl{sub 2}O{sub 4} spinel via sucrose process

Nanocrystalline MgAl{sub 2}O{sub 4} spinel powder was synthesized using metal nitrates and a polymer matrix precursor composed of sucrose and polyvinyl alcohol (PVA). The precursor and the calcined powders were characterized by simultaneous thermal analysis (STA), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), field emission scanning electron microscopy (FE-SEM) and transmission electron microscopy (TEM). According to XRD results, the inceptive formation temperature of spinel via this technique was between 600 and 700 deg. C. The calcined powder at 800 deg. C for 2 h has faced shaped morphology and its crystallite size is in the range of 8-12 nm. Further studies also showed that the amount of polymeric matrix to metal ions has significant influence on the crystallite size of synthesized magnesium aluminate spinel powder.

36 MATERIALS SCIENCE↗

The effect of Cu content on the structure of Ni{sub 1-x}Cu{sub x}Fe{sub 2}O{sub 4} spinels

A series of Ni{sub 1-x}Cu{sub x}Fe{sub 2}O{sub 4} (0 {<=} x {<=} 0.5) spinels were synthesized employing sol-gel combustion method at 400 {sup o}C. The decomposition process was monitored by thermal analysis, and the synthesized nanocrystallites were characterized by X-ray diffraction, transmission electron microscopy, infra-red and X-ray photoelectron spectroscopy. The decomposition process and ferritization occur simultaneously over the temperature range from 280 {sup o}C to 350 {sup o}C. TEM indicates the increase of lattice parameter and particle size with the increase of copper content in accordance with the XRD analysis. Cu{sup 2+} can enter the cubic spinel phase and occupy preferentially the B-sites within x = 0.3, and redundant copper forms CuO phase separately. A broadening of the O 1s region increases with the increment of copper content compared to pure NiFe{sub 2}O{sub 4}, showing different surface oxygen species from the spinel and CuO. Cu{sup 2+} substitution favors the occupancy of A-sites by Fe{sup 3+}.

36 MATERIALS SCIENCE↗

A comparative study on the optical limiting properties of different nano spinel ferrites with Z-scan technique

Highlights: ► First report in which the optical limiting properties of five different nano spinel ferrites are compared. ► The obtained nonlinearity fits to a two-photon like absorption process. ► Except for NiFe{sub 2}O{sub 4}, the observed nonlinearity has contributions from excited state absorption. ► A size dependent optical limiting response is obtained. ► Among the investigated ferrites, ZnFe{sub 2}O{sub 4} is found to be a better candidate for the optical limiting applications. -- Abstract: We report the optical limiting properties of five different spinel ferrites, NiFe{sub 2}O{sub 4}, Ni{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4}, ZnFe{sub 2}O{sub 4}, Ni{sub 0.5}Co{sub 0.5}Fe{sub 2}O{sub 4}, and CoFe{sub 2}O{sub 4} with an average particle grain size of 8 nm. The optical limiting properties are investigated using the open aperture Z-scan technique. The obtained nonlinearity fits to a two-photon like absorption process. Except for NiFe{sub 2}O{sub 4}, the observed nonlinearity has contributions from excited state absorption. The optical limiting response is also studied against particle size and the nonlinearity is found to increase with increasing particle size within the range of our investigations. On comparing the optical limiting properties, ZnFe{sub 2}O{sub 4} is found to be a better candidate for the optical limiting applications. To the best of our knowledge, this is the first report where the optical limiting properties of spinel ferrites are compared.

36 MATERIALS SCIENCE↗

Study on the energy band structure and photoelectrochemical performances of spinel Li{sub 4}Ti{sub 5}O{sub 12}

Highlights: • Spinel Li{sub 4}Ti{sub 5}O{sub 12} possesses more positive potential of valence band and wider band gap than TiO{sub 2}. • Spinel Li{sub 4}Ti{sub 5}O{sub 12} displays typical n-type semiconductor characteristic and excellent UV-excitateded photocatalysis activity. • Our preliminary study will open new perspectives in investigation of other lithium-based compounds for new photocatalysts. - Abstract: Energy band structure, photoelectrochemical performances and photocatalysis activity of spinel Li{sub 4}Ti{sub 5}O{sub 12} are investigated for the first time in this paper. Li{sub 4}Ti{sub 5}O{sub 12} possesses more positive valence band potential and wider band gap than TiO{sub 2} due to its valence band consisting of Li{sub 1s} and Ti{sub 3d} orbitals mixed with O{sub 2p}. Li{sub 4}Ti{sub 5}O{sub 12} shows typical photocatalysis material characteristics and excellent photocatlytic activity under UV irradiation.

36 MATERIALS SCIENCE↗

Role of Ni concentration on structural and magnetic properties of inverse spinel Ferrite

Highlights: • Ni doped Co{sub 1-x}Mn{sub x}Fe{sub 2}O{sub 4} (0≤x≤0.1) nanoparticles have been synthesized with an average particle size in the range 15–20 nm. • Lattice parameter decreases with increase in Ni concentration in CoFe{sub 2}O{sub 4} nanoparticles. • XRD and FTIR analysis confirmed the formation of cubic spinel ferrite structure. • Room temperature and low temperature magnetic properties of described system have been measured. - Abstract: In present work, Nickel (Ni) substituted Mn-Co ferrite nanoparticles, with doping content varying from 0 to 0.1, have been synthesized. The inverse spinel structure of doped cobalt ferrite has been claimed by X-ray diffractometer with average particle size of 20 nm. The decrease in lattice parameter and increase in X-ray density has been found with increase in Ni concentration in ferrite structure. Fourier transform infrared spectroscopy analysis showed two vibrational frequency bands (υ{sub 1} and υ{sub 2}) for octahedral and tetrahedral sites depicting the formation of spinel ferrite. In addition, Transmission electron microscopy analyses were carried out to investigate particle size, which indicates that TEM and XRD analyses are in agreement. Magnetic analyses depict that coercivity value increases from 635 Oe to 841 Oe in Ni doped Mn-Co ferrite. Exchange interactions between Ni and Mn{sub 0.2}Co{sub 0.8-x}Fe{sub 2}O{sub 4} result for enlargement in coercivity and shift in hysteresis loop towards positive direction along the field axis. The increment in magnetic coercive field and exchange bias has been observed as temperature decreases. Enhanced magnetic properties at low temperature are attributed to magneto-crystalline anisotropy and surface effects.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Li-Substituted Layered-Spinel Cathode Material for Sodium-Ion Batteries

The O 3 -type layered Na(Ni x Fe y Mn z )O 2 (0 < x, y, z < 1) cathode materials have attracted great interest in sodium ion batteries due to the abundance and cost of raw materials and their high specific capacities. However, the cycling stability and rate capability at high voltages (> 4.0 V) of these materials remain an issue. In this work, we successfully synthesized a Li-substituted layered-tunneled (O 3 -spinel) intergrowth cathode (LS-NFM) to address these issues. The remarkable structural compatibility and connectivity of the two phases were confirmed by X-ray diffraction (XRD), selected area electron diffraction (SAED), and high-resolution transmission electron microscopy (HRTEM). The LS-NFM electrode reached a discharge capacity of 96 mAh g -1 with a capacity retention of 86% after 100 cycles at a current rate of 100 mA g -1 in a voltage window of 2.0-4.2 V. Moreover, the LS-NFM cathode exhibited an enhanced rate capability in comparison to the undoped single-phased layered cathode (NFM). The enhanced rate capability of LS-NFM can be explained by the significantly increased effective Na + diffusivity measured by the galvanostatic intermittent titration technique (GITT) compared to the undoped control NFM cathode, which can be ascribed to the improved charge transport kinetics through shortened diffusion path by direct connection between the 3D channels in the spinel phase and 2D channels in the layered phase. The results from ex situ hard/soft X-ray adsorption spectroscopy (XAS) suggest that the capacity of the LS-NFM cathode is mainly associated with the Ni 2+ /Ni 4+ redox couple and slightly from the Fe 3+ /Fe 4+ redox couple. The voltage profile of the LS-NFM cathode exhibits a reversible plateau above 4.0 V, indicating great stability at high voltages and structural stabilization by the spinel phase. In addition to the substitution of various transition metals, or the modification of the stoichiometry of each transition metal, this study provides a new strategy to improve electrochemical performance of layered cathode materials for sodium ion batteries.

25 ENERGY STORAGE↗

Intervening Oxygen Enabled Magnetic Moment Modulation in Spinel Nanostructures

Oxygen vacancies and lattice oxygen on the surface of nanoparticles play crucial roles in the magnetism of transition metal oxides. A fundamental understanding of the interactions between the 2p orbitals of oxygen anions and the 3d orbitals of metal cations is of immense interest for applications due to specific electronic, magnetic, and chemical properties. The spinel nanostructures Co 3 O 4 ,Fe 3 O 4 , and CoFe 2 O 4 present a unique model to alter coordination and bonding due to d electrons and oxygen 2p states. We performed complementary experimental techniques and corresponding model calculations to show that the overall net magnetism differs significantly between the O 2 -rich and -deficient environments. It was found that in monometallic spinel oxides (e.g., Co 3 O 4 and Fe 3 O 4 ), the changes in the spin moment are relatively small (~0.08μ B per formula unit) compared to those in the bimetallic spinel oxide CoFe 2 O 4 (~0.40 μ B per formula unit). Finally, our study illustrates that the O 2 -rich/deficient conditions alter the exchange of O h sites and adjust the metal ion moments so as to impact the overall magnetism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗