Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Space Window”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS2015

Seasonal Variations of the James Webb Space Telescope Orbital Dynamics

While spacecraft orbital variations due to the Earth's tilt and orbital eccentricity are well-known phenomena, the implications for the James Webb Space Telescope present unique features. We investigate the variability of the observatory trajectory characteristics, and present an explanation of some of these effects using invariant manifold theory and local approximation of the dynamics in terms of the restricted three-body problem.

launch windows↗
NASA NTRS2015

Seasonal Variations of the James Webb Space Telescope Orbital Dynamics

LV separation state is fixed ECEF, so inertial states vary with hourly, daily, monthly, and yearly frequencies The net effect of all frequencies leads to significant variations in orbit geometry Injection states can be matched with invariant manifolds of periodic orbits in the CR3BP to explain observed final orbit.

Three Body Problem↗
NASA NTRS1997

Cosmic Ray Induced Degradation in X-Ray Detectors On Board the Near Earth Asteroid Rendezvous Spacecraft

The Near-Earth Asteroid Rendezvous (NEAR) mission is the first in NASA's new Discovery Program to explore the solar system. Launched in February 1996, the NEAR spacecraft will take a long cruise flight arriving at the asteroid 433 Eros in January 1999 for a one year orbiting survey operation. This long exposure to the space environment has already proven to be an additional complication for the x-ray spectrometer. The asteroid pointing detectors for the x-ray spectrometer are three gas-filled proportional counters with resolving power in the range of 1 keV. Therefore, to resolve the important but closely spaced magnesium, aluminum and silicon k alpha lines( 1.255, 1.487, 1.739 keV respectively), magnesium and aluminum balanced filters are used on two of the detectors. The x-ray florescence from the surface of Eros is stimulated by solar x-rays. A proportional counter and a silicon PIN detector are used to monitor the solar incident x-ray flux. The proportional counters are single wire gas filled beryllium lined steel tubes operating at about 1100 volt. The 25 cm(exp 2) optical window is one mil. thick beryllium. To define the detector's active region, two boron nitride disks were incorporated in the tube just outside window area. It appears from the space flight data that the space environment is creating a charge on these boron nitride disks which ultimately distorts the tube gain and resolution. This broadening of the photo peak makes it more difficult to identify weak peaks and so degrades the statistical accuracy for some very important elements such as sulfur, calcium and iron (2.307, 3.690, 6.403 keV respectively). If the broadening is severe enough in the low energy region, counts will be lost as the photo peak spreads below the lower level discriminator (0.7 keV).

Floyd, S. R.↗
NASA NTRS2000

InGaP/InGaAs-on-Ge Concentrator Solar Cell for Space Power Generation

The passivating front and back window layer of the top cell has been chosen. We have chosen to use InGaAs as the tunnel junction interconnect compound since it is easily degenerately doped. All of the dual junction cell structures were grown on GaAs substrates. Time constraints prevented us from completing the development of the GaAs-on-Ge growth process. Analysis of the I-V and EQE data, and comparison with computer-modeled data, shows that the performance of the dual-junction cell is still being controlled by the bottom cell, in spite of top cell thinning. Further improvement in the dual-junction cell efficiency is possible by thinning the front window.

Sinharoy, Samar↗
DOE OSTI2014

Hyperbolic-metamaterial antennas for broadband enhancement of dipole emission to free space

Dipole emitters used in nano optics and nanophotonics (e.g., fluorescent molecules or quantum dots) are weak radiators and thus detecting the radiation of a single emitter gets possible only if it is significantly enhanced. For this enhancement, one often utilizes resonant nanoantennas (Purcell's effect); this method, however, requires the exact knowledge of source location and radiation frequency which constitute a significant drawback. One known possibility for broadband location-insensitive radiation enhancement is to use a layer of the so-called hyperbolic metamaterial. However, the enhanced radiated energy is mainly directed into the volume of the lossy medium, where it is lost to heating. In this work, we suggest specific shapes of macroscopic hyperbolic metamaterial samples to open radiation windows for enhanced radiation to free space. We show that hyperbolic media slabs with properly shaped macroscopic grooves convert the evanescent waves produced by a dipole into waves traveling in free space, which results in the enhancement of useful radiation by one to two orders of magnitude. That level of enhancement of radiation into free-space which is also wideband and of non-resonant nature has not been reported up to now. These results may open possibilities for realization of broadband and directive antennas, where the primary radiators are randomly positioned fluorescent molecules or quantum dots.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1990

The use of PLAID in the Space Station Freedom viewing analysis

The focus early in the Space Station Freedom Program was on identifying viewing requirements for both direct viewing (windows) and indirect viewing (closed-circuit television). Currently, an analysis is being conducted to address the feasibility of viewing for Space Station Freedom. The goal of this analysis is to determine the optimum location for the windows and closed-circuit television cameras in order to meet the established requirements. Additionally all viewing provisions must adequately support Space Station assembly and on-board operations once the Station is operable. PLAID, a three-dimensional graphics system developed at NASA/Johnson Space Center, was selected for use as the primary tool in this analysis. PLAID provides the capability to simulate the assembly of the Space Station Freedom, as well as to examine operations on the Station as it evolves. In addition, it is used as a tool to analyze general out-the-window viewing conditions for all Space Station components, and provides the ability to integrate an anthropometric scale-modeled person (representing a crewmember) with the Station's interior architecture.

Mount, Frances E.↗
NASA NTRS1993

Using computer graphics to design Space Station Freedom viewing

Viewing requirements were identified early in the Space Station Freedom program for both direct viewing via windows and indirect viewing via cameras and closed-circuit television (CCTV). These requirements reside in NASA Program Definition and Requirements Document (PDRD), Section 3: Space Station Systems Requirements. Currently, analyses are addressing the feasibility of direct and indirect viewing. The goal of these analyses is to determine the optimum locations for the windows, cameras, and CCTV's in order to meet established requirements, to adequately support space station assembly, and to operate on-board equipment. PLAID, a three-dimensional computer graphics program developed at NASA JSC, was selected for use as the major tool in these analyses. PLAID provides the capability to simulate the assembly of the station as well as to examine operations as the station evolves. This program has been used successfully as a tool to analyze general viewing conditions for many Space Shuttle elements and can be used for virtually all Space Station components. Additionally, PLAID provides the ability to integrate an anthropometric scale-modeled human (representing a crew member) with interior and exterior architecture.

Goldsberry, Betty S.↗
NASA NTRS2008

Titan's Surface Brightness Temperatures and H2 Mole Fraction from Cassini CIRS

The atmosphere of Titan has a spectral window of low opacity around 530/cm in the thermal infrared where radiation from the surface can be detected from space. The Composite Infrared spectrometer1 (CIRS) uses this window to measure the surface brightness temperature of Titan. By combining all observations from the Cassini tour it is possible to go beyond previous Voyager IRIS studies in latitude mapping of surface temperature. CIRS finds an average equatorial surface brightness temperature of 93.7+/-0.6 K, which is close to the 93.65+/-0.25 K value measured at the surface by Huygens HASi. The temperature decreases toward the poles, reaching 91.6+/-0.7 K at 90 S and 90.0+/-1.0 K at 87 N. The temperature distribution is centered in latitude at approximately 12 S, consistent with Titan's season of late northern winter. Near the equator the temperature varies with longitude and is higher in the trailing hemisphere, where the lower albedo may lead to relatively greater surface heating5. Modeling of radiances at 590/cm constrains the atmospheric H2 mole fraction to 0.12+/-0.06 %, in agreement with results from Voyager iris.

Jennings, Donald E.↗
NASA NTRS1977

Optical scanner

An optical scanner that sequentially focuses optical energy (light) at selected points in space is described. The essential component is a scanning wheel including several glass windows with each window having a different thickness. Due to this difference in thickness, the displacement of the emerging light from the incident light is different for each window. The scanner transmits optical energy to a point in space while at the same time receiving any optical energy generated at that point and then moves on to the next selected point and repeats this transmit and receive operation. It fills the need for a system that permits a laser velocimeter to rapidly scan across a constantly changing flow field in an aerodynamic test facility.

Rhodes, D. B.↗
NASA NTRS1989

Earth-orbiting resonant-mass gravitational wave detectors

Earth-based gravitational wave detectors suffer from the need to support the large antenna masses against the earth's gravity without transmitting a significant amount of seismic noise. Passive vibration isolation is difficult to achieve below 1 Hz on the earth. Vibration-free space environment thus gives an opportunity to extend the frequency window of gravitational wave detection to ultralow frequencies. The weightless condition of a space laboratory also enables construction of a highly symmetric multimode antenna which is capable of resolving the direction of the source and the polarization of the incoming wave without resorting to multiantenna coincidence. Two types of earth-orbiting resonant-mass gravitational wave detectors are considered. One is a skyhook gravitational wave detector, proposed by Braginsky and Thorne (1985). The other is a spherical detector, proposed by Forward (1971) and analyzed by Wagoner and Paik (1976).

Paik, Ho Jung↗
NASA NTRS2015

Cost-Effective Icy Bodies Exploration using Small Satellite Missions

It has long been known that Saturn's moon Enceladus is expelling water-rich plumes into space, providing passing spacecraft with a window into what is hidden underneath its frozen crust. Recent discoveries indicate that similar events could also occur on other bodies in the solar system, such as Jupiter's moon Europa and the dwarf planet Ceres in the asteroid belt. These plumes provide a possible giant leap forward in the search for organics and assessing habitability beyond Earth, stepping stones toward the long-term goal of finding extraterrestrial life. The United States Congress recently requested mission designs to Europa, to fit within a cost cap of $1B, much less than previous mission designs' estimates. Here, innovative cost-effective small spacecraft designs for the deep-space exploration of these icy worlds, using new and emerging enabling technologies, and how to explore the outer solar system on a budget below the cost horizon of a flagship mission, are investigated. Science requirements, instruments selection, rendezvous trajectories, and spacecraft designs are some topics detailed. The mission concepts revolve around a comparably small-sized and low-cost Plume Chaser spacecraft, instrumented to characterize the vapor constituents encountered on its trajectory. In the event that a plume is not encountered, an ejecta plume can be artificially created by a companion spacecraft, the Plume Maker, on the target body at a location timed with the passage of the Plume Chaser spacecraft. Especially in the case of Ceres, such a mission could be a great complimentary mission to Dawn, as well as a possible future Europa Clipper mission. The comparably small volume of the spacecraft enables a launch to GTO as a secondary payload, providing multiple launch opportunities per year. Plume Maker's design is nearly identical to the Plume Chaser, and fits within the constraints for a secondary payload launch. The cost-effectiveness of small spacecraft missions enables the exploration of multiple solar system bodies in reasonable timeframes despite budgetary constraints, with only minor adaptations. The work presented here is a summary of concepts targeting icy bodies, such as Europa and Ceres, which have been developed over the last year at NASA Ames Research Center's Mission Design Division. The platforms detailed in this work are also applicable to the cost-effective exploration of many other small icy bodies in the solar system.

Mission Design↗
NASA NTRS1987

Optimized retrievals of precipitable water from the VAS 'split window'

Precipitable water fields have been retrieved from the VISSR Atmospheric Sounder (VAS) using a radiation transfer model for the differential water vapor absorption between the 11- and 12-micron 'split window' channels. Previous moisture retrievals using only the split window channels provided very good space-time continuity but poor absolute accuracy. This note describes how retrieval errors can be significantly reduced from plus or minus 0.9 to plus or minus 0.6 gm/sq cm by empirically optimizing the effective air temperature and absorption coefficients used in the two-channel model. The differential absorption between the VAS 11- and 12-micron channels, empirically estimated from 135 colocated VAS-RAOB observations, is found to be approximately 50 percent smaller than the theoretical estimates. Similar discrepancies have been noted previously between theoretical and empirical absorption coefficients applied to the retrieval of sea surface temperatures using radiances observed by VAS and polar-orbiting satellites. These discrepancies indicate that radiation transfer models for the 11-micron window appear to be less accurate than the satellite observations.

Chesters, Dennis↗
NASA NTRS2019

The NASA Orbital Debris Engineering Model 3.1: Development, Verification, and Validation

The NASA Orbital Debris Program Office has developed the Orbital Debris Engineering Model (ORDEM) primarily as a tool for spacecraft designers and other users to understand the long-term risk of collisions with orbital debris. The newest version, ORDEM 3.1, incorporates the latest and highest fidelity datasets available to build and validate representative orbital debris populations encompassing low Earth orbit (LEO) to geosynchronous orbit (GEO) altitudes for the years 2016-2050. ORDEM 3.1 models fluxes for object sizes > 10 μm within or transiting LEO and > 10 cm in GEO. The deterministic portion of the populations in ORDEM 3.1 is based on the U.S. Space Surveillance Network (SSN) catalog, which provides coverage down to approximately 10 cm in LEO and 1 m in GEO. Observational datasets from radar, in situ, and optical sources provide a foundation from which the model populations are statistically extrapolated to smaller sizes and orbit regions that are not well-covered by the SSN catalog, yet may pose the greatest threat to operational spacecraft. Objects in LEO ranging from approximately 5 mm to 10 cm are modeled using observational data from ground-based radar, namely the Haystack Ultrawideband Satellite Imaging Radar (HUSIR – formerly known as Haystack). The LEO population smaller than approximately 3 mm in size is characterized based on a reanalysis of in situ data from impacts to the windows and radiators of the U.S. Space Transportation System orbiter vehicle, i.e., the Space Shuttle. Data from impacts on the Hubble Space Telescope are also used to validate the sub-millimeter model populations in LEO. Debris in GEO with sizes ranging from 10 cm to 1 m is modeled using optical measurement data from the Michigan Orbital DEbris Survey Telescope (MODEST). Specific, major debris-producing events, including the Fengyun-1C, Iridium 33, and Cosmos 2251 debris clouds, and unique populations, such as sodium-potassium droplets, have been re-examined and are modeled and added to the ORDEM environment separately. The debris environment greater than 1 mm is forecast using NASA’s LEO-to- GEO ENvironment Debris model (LEGEND). Future explosions of intact objects and collisions involving objects greater than 10 cm are assessed statistically, and the NASA Standard Satellite Breakup Model is used to generate fragments from these events. Fragments smaller than 10 cm are further differentiated based on material density categories, i.e., high-, medium-, and low-density, to better characterize the potential debris risk posed to spacecraft. The future projection of the sub-millimeter environment is computed using a special small-particle degradation model where small particles are created from intact spacecraft and rocket bodies. This work discusses the development, features, and capabilities of the ORDEM 3.1 model; the ne new data analyses used to build the model populations; and sample verification and validation results.

Matney, M.↗
DOE OSTI2014

Beam coupling in hybrid photorefractive inorganic-cholesteric liquid crystal cells: Impact of optical rotation

We develop a theoretical model to describe two-beam energy exchange in a hybrid photorefractive inorganic-cholesteric cell. A cholesteric layer is placed between two inorganic substrates. One of the substrates is photorefractive (Ce:SBN). Weak and strong light beams are incident on the hybrid cell. The interfering light beams induce a periodic space-charge field in the photorefractive window. This penetrates into the cholesteric liquid crystal (LC), inducing a diffraction grating written on the LC director. In the theory, the flexoelectric mechanism for electric field-director coupling is more important than the LC static dielectric anisotropy coupling. The LC optics is described in the Bragg regime. Each beam induces two circular polarized waves propagating in the cholesteric cell with different velocities. The model thus includes optical rotation in the cholesteric LC. The incident light beam wavelength can fall above, below, or inside the cholesteric gap. The theory calculates the energy gain of the weak beam, as a result of its interaction with the pump beam within the diffraction grating. Theoretical results for exponential gain coefficients are compared with experimental results for hybrid cells filled with cholesteric mixture BL038/CB15 at different concentrations of chiral agent CB15. Reconciliation between theory and experiment requires the inclusion of a phenomenological multiplier in the magnitude of the director grating. This multiplier is cubic in the space-charge field, and we provide a justification of the q-dependence of the multiplier. Within this paradigm, we are able to fit theory to experimental data for cholesteric mixtures with different spectral position of cholesteric gap relative to the wavelength of incident beams, subject to the use of some fitting parameters.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2016

Measurement of a redshift-space power spectrum for BOSS galaxies and the growth rate at redshift 0.57

We present a measurement of the two-dimensional (2D) redshift-space power spectrum for the Baryon Oscillation Spectroscopic Survey Data Release 11 CMASS galaxies in the northern Galactic cap based on the method developed by Jing and Börner. In this method, we first measure the 2D redshift-space correlation function and obtain the 2D power spectrum based on Fourier transform of the correlation function. The method is tested with an N-body mock galaxy catalog, which demonstrates that the method can yield an accurate and unbiased measurement of the redshift-space power spectrum given that the input 2D correlation function is correct. Compared with previous measurements in literature that are usually based on direct Fourier transform in redshift space, our method has the advantages that the window function and shot noise are fully corrected. Thus, our measurement can facilitate a direct comparison with the theoretical predictions. Our 2D power spectrum, by construction, can reproduce the 2D correlation function, and it can reproduce, for example, the 2D power spectrum of Beutler et al. accurately if ours is convolved with the window function they provided. We then develop a method to measure the structure growth rate, by separating the anisotropic redshift-space power spectrum from the isotropic real-space power spectrum. We have carefully corrected for the nonlinearities in the mapping from real space to redshift space, according to the theoretical model of Zhang et al. Finally, we obtain the measurement of structure growth rate f(z{sub eff})σ {sub 8}(z{sub eff}) = 0.438 ± 0.037 at the effective redshift z{sub eff} = 0.57. The result is useful for constraining cosmological parameters. The measurements of the 2D power spectrum will be released soon.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2019

Performance Analysis of 0.4–1.2-μm CdTe Solar Cells

Thin-film CdTe solar cells with an absorber thickness range of 0.4 to 1.2 μm were fabricated by close-space sublimation on a transparent MgZnO window layer. Microscopy cross sections showed that a significant fraction of the CdTe crystallites extended throughout the absorber layer, and capacitance measurements demonstrated that the absorbers were depleted into forward bias. Current and fill factor loss analyses were used to identify dominant loss mechanisms in the devices as a function of absorber thickness, and photoluminescence measurements were increasingly influenced by back-surface recombination as the absorber was made thinner. Furthermore, the thinner CdTe devices showed modest current and fill factor reduction but overall good diode quality, and the highest efficiency of 15% was achieved with 1.2 μm CdTe.

14 SOLAR ENERGY↗
NASA NTRS1992

Multilayer and grazing incidence X-ray/EUV optics; Proceedings of the Meeting, San Diego, CA, July 22-24, 1991

The present conference discusses the Advanced X-ray Astrophysics Facility (AXAF) calibration by means of synchrotron radiation and its X-ray reflectivity, X-ray scattering measurements from thin-foil X-ray mirrors, lobster-eye X-ray optics using microchannel plates, space-based interferometry at EUV and soft X-ray wavelengths, a water-window imaging X-ray telescope, a graded d-spacing multilayer telescope for high energy X-ray astronomy, photographic films for the multispectral solar telescope array, a soft X-ray ion chamber, and the development of hard X-ray optics. Also discussed are X-ray spectroscopy with multilayered optics, a slit aperture for monitoring X-ray experiments, an objective double-crystal spectrometer, a Ly-alpha coronagraph/polarimeter, tungsten/boron nitride multilayers for XUV optical applications, the evaluation of reflectors for soft X-ray optics, the manufacture of elastically bent crystals and multilayer mirrors, and selective photodevices for the VUV.

Hoover, Richard B.↗
NASA NTRS1992

Space environmental effects on coated optics

Several high reflectance mirrors and an output window were selected for the Long Duration Exposure Facility (LDEF) by pre-flight screening using laboratory simulation of natural space radiation. One mirror, a silicon/aluminum oxide design, showed expected excellent stability in orbit and a long shelf life. An aluminum oxide coated calcium fluoride window also showed good stability. Less stable but more interesting behavior was observed in the zinc sulfide based mirrors that showed contamination effects and related dendrite formation. These samples, which were located on both leading and trailing edges, also had interesting impact sites.

T M Donovan↗