Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Solar cell”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Optimal design study of high efficiency indium phosphide space solar cells

Recently indium phosphide solar cells have achieved beginning of life AMO efficiencies in excess of 19 pct. at 25 C. The high efficiency prospects along with superb radiation tolerance make indium phosphide a leading material for space power requirements. To achieve cost effectiveness, practical cell efficiencies have to be raised to near theoretical limits and thin film indium phosphide cells need to be developed. The optimal design study is described of high efficiency indium phosphide solar cells for space power applications using the PC-1D computer program. It is shown that cells with efficiencies over 22 pct. AMO at 25 C could be fabricated by achieving proper material and process parameters. It is observed that further improvements in cell material and process parameters could lead to experimental cell efficiencies near theoretical limits. The effect of various emitter and base parameters on cell performance was studied.

Jain, Raj K.↗
NASA NTRS1985

Stowable Solar-Cell Array

Solar electric power source easily storable and transportable. Source employs blanket of photovoltaic cells rolled up when not in use. The hollow core of canister reel used as storage space for radio equipment or first aid supplies, etc.

Stella, P. M.↗
NASA NTRS1972

Development of lithium doped radiation resistent solar cells

Lithium-doped solar cells have been fabricated with initial lot efficiencies averaging 11.9 percent in an air mass zero (AMO) solar simulator and a maximum observed efficiency of 12.8 percent. The best lithium-doped solar cells are approximately 15 percent higher in maximum power than state-of-the-art n-p cells after moderate to high fluences of 1-MeV electrons and after 6-7 months exposure to low flux irradiation by a Sr-90 beta source, which approximates the electron spectrum and flux associated with near Earth space. Furthermore, lithium-doped cells were found to degrade at a rate only one tenth that of state-of-the-art n-p cells under 28-MeV electron irradiation. Excellent progress has been made in quantitative predictions of post-irradiation current-voltage characteristics as a function of cell design by means of capacitance-voltage measurements, and this information has been used to achieve further improvements in lithium-doped cell design.

Berman, P. A.↗
NASA NTRS1980

Periodic annealing of radiation damage in GaAs solar cells

Continuous annealing of GaAs solar cells is compared with periodic annealing to determine their relative effectiveness in minimizing proton radiation damage. It is concluded that continuous annealing of the cells in space at 150 C can effectively reduce the proton radiation damage to the GaAs solar cells. Periodic annealing is most effective if it can be initiated at relatively low fluences (approximating continuous annealing), especially if low temperatures of less than 200 C are to be used. If annealing is started only after the fluence of the damaging protons has accumulated to a high value 10 to the 11th power sq/pcm), effective annealing is still possible at relatively high temperatures. Finally, since electron radiation damage anneals even more easily than proton radiation damage, substantial improvements in GaAs solar cell life can be achieved by incorporating the proper annealing capabilities in solar panels for practical space missions where both electron and proton radiation damage have to be minimized.

Loo, R. Y.↗
NASA NTRS1985

Fabrication and analysis of dot junction silicon solar cells

A design of solar cells with reduced junction area on the cell surface is investigated for reduction of saturation current and increase in open-circuit voltage. Equidiameter dot junctions distributed across the surface of the cell offer an efficient alternative, with variations in dot diameter and in the spacing between dots giving the required variations in the ratio of junctions area to total surface area. A simplified analysis for short-circuit current and other cell parameters, which enables cell design optimization, is presented. Efficiencies beyond 18 percent are obtainable in flat-plate terrestrial applications. Experimental solar-cell performance results, as functions of different area ratios, and bulk doping are presented. It is shown that saturation current reduction and open-circuit voltage increase is obtained by reduced junction area.

Crotty, G. T.↗
NASA NTRS2004

Utility of Thin-Film Solar Cells on Flexible Substrates for Space Power

The thin-film solar cell program at NASA GRC is developing solar cell technologies for space applications which address two critical metrics: specific power (power per unit mass) and launch stowed volume. To be competitive for many space applications, an array using thin film solar cells must significantly increase specific power while reducing stowed volume when compared to the present baseline technology utilizing crystalline solar cells. The NASA GRC program is developing two approaches. Since the vast majority of the mass of a thin film solar cell is in the substrate, a thin film solar cell on a very lightweight flexible substrate (polymer or metal films) is being developed as the first approach. The second approach is the development of multijunction thin film solar cells. Total cell efficiency can be increased by stacking multiple cells having bandgaps tuned to convert the spectrum passing through the upper cells to the lower cells. Once developed, the two approaches will be merged to yield a multijunction, thin film solar cell on a very lightweight, flexible substrate. The ultimate utility of such solar cells in space require the development of monolithic interconnections, lightweight array structures, and ultra-lightweight support and deployment techniques.

Dickman, J. E.↗
NASA NTRS1988

Photon degradation of AlGaAs/GaAs solar cells

The behavior of GaAs solar cells after photon illumination for a prolonged exposure time is presented. More than 55 OMCVD AlGaAs/GaAs solar cells were exposed for over 400 h to AM0 photons at 28 C in three separate, well-controlled runs. Significant degradation of solar cell efficiency was observed in two out of three runs. Although noticeable losses in the open-circuit voltage, fill factor, and maximum power were observed, no change in the short-circuit current was found. In one of the runs, no change was seen in either the test cells or the control cells. Each cell in this run was protected with a coverglass. The cells in this run had thicker buffer layers and thinner window layers than the cells in the other two runs.

Anspaugh, Bruce↗
NASA NTRS2007

Multijunction Solar Cells Optimized for the Mars Surface Solar Spectrum

This paper gives an update on the performance of the Mars Exploration Rovers (MER) which have been continually performing for more than 3 years beyond their original 90-day missions. The paper also gives the latest results on the optimization of a multijunction solar cell that is optimized to give more power on the surface of Mars.

solar power↗
NASA NTRS1979

A theoretical analysis of the current-voltage characteristics of solar cells

The following topics are discussed: (1) dark current-voltage characteristics of solar cells; (2) high efficiency silicon solar cells; (3) short circuit current density as a function of temperature and the radiation intensity; (4) Keldysh-Franz effects and silicon solar cells; (5) thin silicon solar cells; (6) optimum solar cell designs for concentrated sunlight; (7) nonuniform illumination effects of a solar cell; and (8) high-low junction emitter solar cells.

Fang, R. C. Y.↗
NASA NTRS1972

Flexible, low-cost silicon solar cell arrays

Silicon solar cell arrays are pressure-bonded to flexible backing and protected by fluorinated ethylene propylene cover in one mechanized operation. Arrays packaged by this method are flexible, lightweight, insulated, breakage resistant and less expensive.

Forestieri, A. F.↗