Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Soil elemental composition”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Possible petrogenetic associations among igneous components in North Massif soils: Evidence in 2-4 mm soil particles from 76503

Studies of Apollo 17 highland igneous rocks and clasts in breccias from the North and South Massifs have described magnesian troctolite, norite, anorthositic gabbro, dunite, spinel cataclasites, and granulitic lithologies that may have noritic anothosite or anorthositic norite/gabbro as igneous precursors, and have speculated on possible petrogenetic relationships among these rock types. Mineral compositions and relative proportions of plagioclase and plagioclase-olivine particles in samples 76503 indicate that the precursor lithology of those particles were troctolitic anorthosite, not troctolite. Mineral and chemical compositions of more pyroxene-rich, magnesian breccias and granulites in 76503 indicate that their precursor lithology was anorthositic norite/gabbro. The combination of mineral compositions and whole-rock trace-element compositional trends supports a genetic relationship among these two groups as would result from differentiation of a single pluton. Although highland igneous lithologies in Apollo 17 materials have been described previously, the proportions of different igneous lithologies present in the massifs, their frequency of association, and how they are related are not well known. We consider the proportions of, and associations among, the igneous lithologies found in a North Massif soil, which may represent those of the North Massif or a major part of it.

Jolliff, Bradley L.↗
NASA NTRS1989

Long-term changes in solar wind elemental and isotopic ratios - A comparison of two lunar ilmenites of different antiquities

The solar wind components in two lunar ilmenites are examined. The noble gas and nitrogen elemental and isotopic abundances of lunar regolith breccia sample 79035, assumed to have been exposed to solar winds more than 2 Ga ago, are analyzed using stepwise oxidation and pyrolysis. This sample is compared with the data of Frick et al. (1988) for soil sample 71501, recently exposed to solar winds. It is observed that the two elements differ in terms of xenon abundance, helium and neon isotopic rates, and He/Ar elemental ratios. It is concluded that there have been isotopic and elemental abundance changes in solar wind composition over time.

Becker, Richard H.↗
NASA NTRS1976

Viking 1: early results

A brief outline of the Viking 1 mission to Mars is followed by descriptions of the Martian landing site and the scientific instrumentation aboard Viking 1 orbiter and lander. Measurements of the Martian atmosphere provided data on its molecular composition, temperature and pressure. The detection of nitrogen in the Martian atmosphere indicates the existence of life. Panoramic photographs of the Martian surface were also obtained and are shown. Preliminary chemical and biological investigations on samples of Martian soil indicated the presence of the elements iron, calcium, silicon, titanium and aluminum as major constituents. Observed biochemical reactions were judged conducive of biological activity.

Source record↗
NASA NTRS1972

Moon - Possible nature of the body that produced the Imbrian Basin, from the composition of Apollo 14 samples.

Soils from the Apollo 14 site contain nearly three times as much meteoritic material as soils from the Apollo 11, Apollo 12, and Luna 16 sites. Part of this material consists of the ubiquitous micrometeorite component, of primitive (carbonaceous-chondrite-like) composition. The remainder, seen most conspicuously in coarse glass and norite fragments, has a decidedly fractionated composition, with volatile elements less than one-tenth as abundant as siderophiles. This material seems to be debris of the Cyprus-sized planetesimal that produced the Imbrian Basin. Compositionally this planetesimal has no exact counterpart among known meteorite classes, though group IVA irons come close. It also resembles the initial composition of the earth as postulated by the two-component model. Apparently the Imbrian planetesimal was an earth satellite swept up by the moon during tidal recession or capture, or an asteroid deflected by Mars into terrestrial space.

Ganapathy, R.↗
NASA NTRS2006

Chemical Composition by the APXS along the Downhill Traverse of the Mars Exploration Rover Spirit at Gusev Crater

The Alpha Particle X-ray Spectrometer (APXS) onboard the Mars Exploration Rover Spirit continues to determine the elemental composition of samples at Gusev Crater. Starting around sol 600 the rover descended Husband Hill, which is part of the Columbia Hills, visited the inner basin with a large dune field, called 'El Dorado', and parked at Low Ridge to conserve energy during the martian winter. Many unique samples were discovered by the instruments onboard Spirit during her downhill traverse. Here, we report only on the chemical data obtained by the APXS. The compositions of some of the soil samples are comparable to the mean soil determined along the earlier traverse. However, a light-toned subsurface sample (disturbed by the rover wheels), called Dead Sea Samra , showed the highest sulfur content of all soil samples, the lowest Na, Mg, Al, Cl, K, Ca, Ti, Mn, and Zn, among the lowest Si and P, and among the highest Cr, Fe and Ni. Assuming ferric sulfate as a major mineral, large amounts of a pure silica phase must be present. Color and quantity of Dead Sea Samra resemble somewhat an earlier soil called Paso Robles , though the latter is a mixture of sulfates with phosphate-rich soil. Manganese in Dead Sea Samra is so low that the Fe/Mn ratio exceeds 300, a value that has never been found previously on Mars (Fe/Mn ratio of 46 for Gusev basalts), indicating that only Fe(3+) occurs. The dune field El Dorado contained granulated material that exhibited the highest Mg and Ni concentrations and the lowest S and Cl compared to all other soils implying an enrichment of olivine-rich sands. Two outcrops, called Algonquin and Comanche , revealed compositions that differ significantly from those of earlier outcrops as they have the highest concentrations of Mg, Fe, and Ni (except for Ni in Independence) and the lowest of Al, K (detection limit), Ca, and Ti of all brushed and almost all abraded rocks. Normative estimates assign them the highest olivine contents ever found for martian rocks and a very mafic nature based on their high Mg/(Mg+Fe) and low Al, Ca and Na. Their significantly high Ni contents point to a different source than the Gusev plains basalts. The elemental compositions of samples encountered during the downhill traverse revealed a larger chemical diversity of the Columbia Hills than the uphill trek already published.

Bruckner, J.↗
DOE OSTI2023

Community response of soil microorganisms to combined contamination of polycyclic aromatic hydrocarbons and potentially toxic elements in a typical coking plant

Both polycyclic aromatic hydrocarbons (PAHs) and potentially toxic elements (PTEs) of coking industries impose negative effects on the stability of soil ecosystem. Soil microbes are regarded as an essential moderator of biochemical processes and soil remediation, while their responses to PAHs-PTEs combined contamination are largely unknown. In the present study, soil microbial diversity and community composition in the typical coking plant under the chronic co-exposure of PAHs and PTEs were investigated and microbial interaction networks were built to reveal microbial co-occurrence patterns. The results indicated that the concentrations of PAHs in the soil inside the coking plant were significantly higher than those outside the plant. The mean concentration of ∑16PAHs was 2894.4 ng·g −1 , which is 5.58 times higher than that outside the plant. The average Hg concentration inside the coking plant was 22 times higher than the background value of Hebei province. The soil fungal community inside the coking plant showed lower richness compared with that of outside community, and there are significant difference in the bacterial and fungal community composition between inside and outside of coking plant ( p < 0.01). Predicted contribution of different environmental factors to each dominant species based on random forest identified 20 and 25 biomarkers in bacteria and fungi, respectively, that were highly sensitive to coking plant soil in operation, such as Betaproteobacteria，Sordariomycetes and Dothideomycetes . Bacterial and fungal communities were shaped by the soil chemical properties (pH), PTEs (Hg), and PAHs together in the coking plant soils. Furthermore, the bacterial and fungal interaction patterns were investigated separately or jointly by intradomain and interdomain networks. Competition is the main strategy based on the co-exclusion pattern in fungal community, and the competitive relationship inside the coking plant is more complex than that outside the plant. In contrast, cooperation is the dominant strategy in bacterial networks based on the co-occurrence pattern. The present study provided insights into microbial response strategies and the interactions between bacteria and fungi under long-term combined contamination.

Shen, Qihui↗
DOE OSTI2024

Comparison of Geochemical Reactivity of Marcellus and Caney Shale Based on Effluent Analysis

ABSTRACT: In this comparative study, we analyzed the changes in elemental concentrations of hydraulic fracturing fluids after interaction with the Marcellus and Caney Shale formations. The focus was on assessing the inherent risks and environmental implications associated with flowback waters, including their impact on soil, ground, and drinking water quality, and human health safety. The chemical compositions of effluents were determined through Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES) and Mass spectrometry (ICP-MS). The Marcellus Shale, showed concentrations of Cd, averaging 0.380 ppm far exceeding safe water thresholds. Significant levels of As, Se, B, and Pb were detected in both shales, raising concerns about soil and water contamination. Analyzing the effluents from representative samples of sections of the Marcellus (S2 and S7) and Caney (R1 and R2) indicates different geochemical responses over 4 weeks of experiments. This comparison underscores the chemical changes and environmental considerations linked to hydraulic fracturing across shale formations, suggesting the value of tailored monitoring and regulatory measures for each type. 1. INTRODUCTION The Caney and Marcellus shales, differing in geology and geochemistry, represent distinct unconventional reservoirs. The Caney shale, is more ductile, with higher produced water volumes, (Smith et al., 2022) contrasts with the brittle Marcellus shale known for lower brine production but significant data availability. This study aims to elucidate the possible environmental health and safety issues that may arise from the hydraulic fracturing processes. The interaction between fracturing fluids and clays presents a significant challenge. The primary base of these fluids is water, which, when introduced to clay, can induce swelling and constrict flow pathways. This phenomenon is attributed to water molecules infiltrating the layers of clay, particularly in 2:1-type clays, leading to an increased distance between layers. To counteract this, clay stabilizers are employed (Awejori et al., 2021). Despite their effectiveness, these stabilizers are considered temporary solutions. Upon completion of the fracturing process, a concomitant amount of contaminated waters (flow back), with varied content is collected at the surface. From these, we can infer the geochemical reactions and the environmental challenges associated with these waters. Flowback waters can be reinjected or used for other purposes such as irrigation. This requires adequate screening and treatment for safe use.

Dje, L. B.↗
NASA NTRS1974

Breccia 66055 and related clastic materials from the Descartes region, Apollo 16

Trace and major element contents obtained by instrumental neutron activation are reported for a number of Apollo 16 soil samples and miscellaneous breccia fragments. In addition, data obtained by instrumental neutron activation and electron microprobe techniques along with petrographic descriptions are presented for selected subsamples of breccia 66055. The compositions of our soil samples can be modeled by mixtures of various amounts of anorthosite, anorthositic gabbro and low-K Fra Mauro basalt components. These mixtures are typical of those found in a number of petrographic surveys of the fines. Breccia 66055 is a complex regolith breccia which consists of at least four distinct types of microbreccias. No systematic relation with respect to stratigraphic age among the various microbreccia types was observed. Compositionally and texturally, the clasts which compose breccia 66055 are similar to a number of previously reported rock types from the Apollo 16 area. The entire breccia appears to have undergone a complex history of thermal metamorphism. We conclude from the study of these samples that the Cayley Formation is probably homogeneous in its gross compositional and petrographic aspects.

Fruchter, J. S.↗
NASA NTRS2020

The Earth Surface Mineral Dust Source Investigation: An Earth Science Imaging Spectroscopy Mission

The Earth Surface Mineral Dust Source Investigation, EMIT, is planned to operate from the International Space Station starting no earlier than the fall of 2021. EMIT will use visible to short wavelength infrared imaging spectroscopy to determine the mineral composition of the arid land dust source regions of the Earth to advance our knowledge of the radiative forcing effect of these aerosols. Mineral dust emitted into the atmosphere under high wind conditions is an element of the Earth system with many impacts to the Earth’s energy balance, atmosphere, surface, and oceans. The Earth’s mineral dust cycle with source, transport, and deposition phases are studied with advanced Earth System Models. Because the chemical composition, optical and surface properties of soil particles vary strongly with the mineral composition of the source, these models require knowledge of surface soil mineral dust source composition knowledge to accurately understand dust impacts on the Earth system now and in the future. At present, compositional knowledge of the Earth’s mineral dust source regions from existing data sets is uncertain as a result of limited measurements. EMIT will use spectroscopically derived surface mineral composition to update the prescribe boundary conditions for state-of-the-art Earth System Models. The EMIT-initialized models will be used to investigate the impact of direct radiative forcing in the Earth system that depends strongly on the composition of the mineral dust aerosols emitted into the atmosphere. These new measurements and related products will be used to address the EMIT science objectives and made available to the science community for additional investigations. An overview of the EMIT science, development, and mission is presented in this paper.

Green, Robert O.↗
NASA NTRS1975

Light element geochemistry of the Apollo 16 site

The abundance and isotopic composition of carbon, sulfur, and nitrogen, the abundance of helium and hydrogen, and the content of metallic iron are reported for lunar surface samples from the Apollo 16 landing site at Cayley-Descartes. The light elements show marked interstation variability at the site. The abundances in soils of C, N, He, and H are apparently controlled mainly by exposure to the solar wind, through implantation or stripping processes. Carbon abundances (but not observed isotopic distributions) are compatible with a model in which equilibrium is established after 10,000-100,000 yr between solar wind input and loss by proton stripping. Sulfur abundances in soils are apparently controlled by abundances in local country rocks, but the lunar S cycle is quite complex. A metallic iron component may have originated by solar wind reduction of lunar Fe(2+).

Kerridge, J. F.↗
NASA NTRS1986

Composition of the Cayley Formation at Apollo 16 as inferred from impact melt splashes

Abundances of major and trace elements and magnetic properties of 50 impact melt splashes (IMSs) from the Apollo 16 landing site are analzyed to determine the composition of their meteoritic component. MgO-Sc and Ca-Sc variation diagrams and least-squares mixing models are utilized to analyze the IMS, soil, and rock data. Consideration is given to progenitor lithologies of the IMS, the number of impact events represented by the IMS, and the heterogeneity of impact melts from single events. It is observed that the IMSs are composed of either a mixture of anorthosite and low-Sc impact melt rocks or anorthositic norite. It is determined that the surface Cayley layer is composed of TiO2, MgO, Sc, and La concentrations of 0.69, and 7.1 wt pct and 10.5 and 21.2 microg/g, respectively and 0.38 and 5.9 wt pct and 6.1 and 11.8 microg/g, respectively, for the subsurface Cayley layer. The Descartes Formation composition is estimated as TiO2, MgO, Sc, and La concentrations of 0.25, and 3.5 wt pct and 7.7 and 2.2 microg/g, respectively.

Morris, Richard V.↗
NASA NTRS1980

Light elements in lunar soils revisited - Carbon, nitrogen, hydrogen and helium

Based on combined data from F2-stripping and step-wise heating experiments, it is found that about 30-40% of carbon and nitrogen in submature and mature lunar soils resides in the outermost 0.1 micron of grains, presumably in the amorphous coatings that are known to be present. The remainder of carbon and nitrogen resides in composite particles such as agglutinates and microbreccias, within which C and N are distributed in a roughly uniform way. Helium shows much larger variations in its distribution between grain surfaces and interiors, with helium yield related to ilmenite content of the soil. The depth distribution of solar wind hydrogen is not readily resolvable by the stripping technique.

Becker, R. H.↗
NASA NTRS1989

Mechanical properties of lunar regolith and lunar soil simulant

Through the Surveyor 3 and 7, and Apollo 11-17 missions a knowledge of the mechanical properties of Lunar regolith were gained. These properties, including material cohesion, friction, in-situ density, grain-size distribution and shape, and porosity, were determined by indirect means of trenching, penetration, and vane shear testing. Several of these properties were shown to be significantly different from those of terrestrial soils, such as an interlocking cohesion and tensile strength formed in the absence of moisture and particle cementation. To characterize the strength and deformation properties of Lunar regolith experiments have been conducted on a lunar soil simulant at various initial densities, fabric arrangements, and composition. These experiments included conventional triaxial compression and extension, direct tension, and combined tension-shear. Experiments have been conducted at low levels of effective confining stress. External conditions such as membrane induced confining stresses, end platten friction and material self weight have been shown to have a dramatic effect on the strength properties at low levels of confining stress. The solution has been to treat these external conditions and the specimen as a full-fledged boundary value problem rather than the idealized elemental cube of mechanics. Centrifuge modeling allows for the study of Lunar soil-structure interaction problems. In recent years centrifuge modeling has become an important tool for modeling processes that are dominated by gravity and for verifying analysis procedures and studying deformation and failure modes. Centrifuge modeling is well established for terrestrial enginering and applies equally as well to Lunar engineering. A brief review of the experiments is presented in graphic and outline form.

Steven W Perkins↗
NASA NTRS1974

Phase chemistry of Apollo 14 soil sample 14259

Optical, X-ray-diffraction and electron-microprobe techniques were used to investigate 0.26 gm of Apollo 14 soil sample 14259. Major element microprobe analyses were made of 470 mineral grains and 388 glass grains. The mineral abundances in the soil are 45% plagioclase, 41% pyroxene, 7% olivine, 3% oxides, 2% K-feldspar; 1% nickel-iron, and less than 1% troilite. The glasses have a wide range of compositions but preferred values are evident and are interpreted as representative of rock types contributing to the soil at the Fra Mauro site. Eleven per cent of the glasses have compositions like those of mare basalts or mare soils and are believed to be mare-derived. Eighty-six per cent of the glasses are equivalent in composition to basalts that have higher Al, and lower Ca/Al and Fe/Mg ratios than mare basalts. The most abundant compositional type is named Fra Mauro basaltic glass and is subdivided into three related types. The other major glass type in the soil corresponds in composition to anorthositic gabbro.

Aitken, F. K.↗
NASA NTRS1977

Pristine nonmare rocks and the nature of the lunar crust

It is shown that the interdisciplinary study of the nonmare lunar rocks based on trace element, major element, and isotopic data plus petrographic evidence can succeed in amassing a large suite of demonstrably pristine rocks, and that the relative numbers of these rocks are not in accord with statistics amassed on soil fragments and glasses. The term 'pristine' is taken to mean rocks with primary compositions (albeit not necessarily textures) produced by lunar endogenous igneous processes. Melt rocks and crystalline matrix breccias produced by impact processes are excluded. A petrographic synonym for pristine would be 'unremelted, monomict'. It is found that anorthositic norites and noritic anorthosites were rare as primary nonmare rocks. Mechanical mixing appears to have been the dominant petrogenetic process on the highlands.

Warren, P. H.↗
NASA NTRS1987

Mixing levels, the Apennine Front soil component, and compositional trends in the Apollo 15 soils

New compositional data (by INAA) for 29 samples of Apollo 15 soil fractions are presented along with data for six depth intervals of the bottom half of the double drive tube at station 2 on the Apennine Front. The compositional trends in the Apollo 15 soils are discussed in terms of four techniques used to determine the important components of the regolith: graphical techniques, factor analysis, chemical analysis of individual soil particles, and mixing models. The concept of 'mixing levels' is introduced, which states that a sample of lunar regolith can be considered as a mixture on several different compositional levels (I, igneous rock types; II, local rock types; III, soils), and it is shown that most attempts at modeling lunar soils as mixtures have been directed at level II. It is argued that only four components are required to account for the variation in concentrations of lithophile elements in the Apollo 15 samples: mare basalt, KREEP basalt, green glass, and Apennine front soil (best represented by the station 2 samples).

Korotev, Randy L.↗
NASA NTRS1992

A new angle on lunar ferroan-suite differentiation

Small fragments of rock found among soil particles in sample 67513 from Station 11 on the southern rim of North Ray Crater at Apollo 16 yield information regarding the mafic, ferroan rocks from which they drive. We have identified a set of particles that have distinctive trace element geochemistry and whose bulk and mineral compositions indicate a genetic relationship to one another. These include polymict as well as monomict lithologies. Igneous members range from fragments with abundant anorthite to some with abundant exsolved pigeonite and augite. Consideration of this set of rock fragments, combined with mafic ferroan clasts from large breccias and from lunar-highlands meteorites suggests that there may be separate differentiation trends within the ferroan suite which are subparallel and which are less steem in Fe-Mg vs. An fractionation that the vertical trend obtained when the entire ferroan suite is taken together. This may result from a complex magma system with isolated reservoirs or separate, independently evolving magmas. Mineral compositional and textural variations are consistent with a model set forth by Longhi and Boudreau wherein the anorthite-rich samples reflect adcumulus growth with mafic crystals forming only from trapped liquid, and the more mafic samples by anorthite and pyroxene orthocumulate development.

Jolliff, B. L.↗
DOE OSTI2024

Elemental profiling and genomewide association studies reveal genomic variants modulating ionomic composition in Populus trichocarpa leaves

Samples were collected from a population of 1,089 black cottonwood genotypes (P. trichocarpa) assembled from native stands to encompass the central portion of the natural range of the species, stretching from 38.8° to 54.3° N Q13 latitude from California, USA, to British Columbia, Canada. Establishment of the common garden, growth conditions, and site maintenance have been described by Muchero et al (2015). In this study, leaf samples for ionomic profiling were collected from 4-year-old trees, during the growing season, in July 2012, from a field located in Clatskanie, Oregon, USA (46°6′11″N 123°12′13″W). The field site was located in a protected alluvial floodplain containing a uniform Wauna-Locoda silt loam soil area characterized by an acidic pH, in Columbia County, Oregon. A subset of 584 out of the 1,089 P. trichocarpa genotypes were represented in this sampling. These genotypes were randomly selected to represent the geographical distribution of the population. A single fully mature (LPI 7-9) leaf on the south side of the tree exposed to full sunlight conditions was removed from the tree within a 6-hour window centering on solar noon and immediately frozen under dry ice before processing. Leaf samples of 584 P. trichocarpa genotypes were finely ground to 40 mm particle size using a mortar and pestle, and ionomic composition was analyzed using ICP-MS. In total, 20 elements were profiled, including aluminum (Al27), arsenic (As75), boron (B11), cadmium (Cd111), calcium (Ca43), cobalt (Co), copper (Cu), iron (Fe57), magnesium (Mg25), manganese (Mn55), molybdenum (Mo), nickel (Ni60), phosphorus (P31), potassium (K39), rubidium (Rb85), selenium (Se82), sodium (Na23), strontium (Sr88), sulfur (S34), and zinc (Zn66), following a protocol established by Ziegler et al. (2013). For each sample, 75mg of powder was digested overnight in 2.5 mL HNO3 containing 20 parts per billion (ppb) indium as an internal standard, following the protocol described in Ziegler et al. (2013). Following a dilution, concentration of the 20 elements was measured using an Elan 6000 DRC-e mass spectrometer (Perkin-Elmer SCIEX) connected to a PFA microflow nebulizer (Elemental Scientific) and Apex HF desolvator (Elemental Scientific). One measurement per sample per genotype was done. For subsequent analyses, the quantifications were converted to total element concentration.

CBI ionomics, GWAS, plasma-mass spectrometry, neut↗