SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The study of radio emission from SN 1987A after the neutrino burst is reviewed. The observed maximum flux density of the burst at radio wavelengths was about 140 mJy and occurred at 1.4 GHz. The radio light curves for SN 1987A at four frequencies are compared with data for SN 1979C and SN 1980K. VLBI observations of SN 1987A at 2.3 GHz and other radio monitoring programs are examined.
The amorphous phase of Sn would have a superconducting transition temperature near 8 K, much higher than that of crystalline Sn with T(sub c) = 3.5 K. To obtain the amorphous phase, however, it is necessary to use a Sn alloy, usually Cu, and quench condense the alloy films onto a liquid He temperature substrate. Alloying with Cu reduces the superconducting transition temperature almost linearly with Cu concentration with an extrapolation of T(sub c) to zero for x = 0.85. Analysis of the tunneling characteristics between a normal metal electrode with an insulating barrier and superconducting amorphous Sn-Cu films provides detailed information on the changes in the electron-phonon coupling which determines T(sub c) in these alloys. The change from very strong electron-phonon coupling to weak-coupling with the increase in Cu content of amorphous Sn-Cu alloys for the range 0.08 is less than or equal to x is less than or equal to 0.41 is presented and discussed in terms of theories of electron-phonon coupling in disordered metals.
The Type IIn supernova (SN IIn) 2005ip is one of the most well-studied and long-lasting examples of an SN interacting with its circumstellar environment. The optical light curve plateaued at a nearly constant level for more than five years, suggesting ongoing shock interaction with an extended and clumpy circumstellar medium (CSM). Here, we present continued observations of the SN from ∼1000 to 5000 d post-explosion at all wavelengths, including X-ray, ultraviolet, near-infrared (NIR), and mid-infrared. The UV spectra probe the pre-explosion mass loss and show evidence for CNO processing. From the bolometric light curve, we find that the total radiated energy is in excess of 10 50 erg, the progenitor star’s pre-explosion mass-loss rate was >~ 1 × 10 −2 Mꙩ yr −1 , and the total mass lost shortly before explosion was >~1Mꙩ, though the mass lost could have been considerably larger depending on the efficiency for the conversion of kinetic energy to radiation. The ultraviolet through NIR spectrum is characterized by two high-density components, one with narrow high-ionization lines, and one with broader low-ionization H I, He I, [OI], Mg II, and Fe II lines. The rich Fe II spectrum is strongly affected by Lyα fluorescence, consistent with spectral modelling. Both the Balmer and He I lines indicate a decreasing CSM density during the late interaction period. We find similarities to SN 1988Z, which shows a comparable change in spectrum at around the same time during its very slow decline. These results suggest that, at long last, the shock interaction in SN 2005ip may finally be on the decline.
Aqueous acidic batteries as a good choice to respond battery diversity, delivering safety, cost, environmental friendliness and high-power necessary for renewable energy storage. However, the practical adoption is greatly challenged by low-voltage and energy density due to the inadequate metal anode materials. Here we report an interfacial regulated Sn metal anode as the solution of the last piece of the puzzle. In this study, the ease of recycling, low potential, fast redox kinetics, and high capacity of Sn perfectly fit the battery system, and the Sn metal shedding critical issue is successfully suppressed by promoting uniform deposition for added interaction from alloying. Consequently, this reversible Sn anode with 442 mAh g -1 matches well to different types of cathodes. The as-assembled acidic batteries also demonstrate sufficient output voltage (up to 1.7 V), energy density (up to 312 Wh kg -1 based on both electrodes), kinetics (up to 24 C) and stability (up to 2400 cycles).
Sn(CCl)2 crystallizes in the orthorhombic Imma space group. The structure is one-dimensional and consists of two Sn(CCl)2 ribbons oriented in the (0, 1, 0) direction. Sn2+ is bonded in a tetrahedral geometry to two equivalent C and two equivalent Cl1- atoms. Both Sn–C bond lengths are 2.08 Å. Both Sn–Cl bond lengths are 2.34 Å. C is bonded in a linear geometry to one Sn2+ and one C atom. The C–C bond length is 1.23 Å. Cl1- is bonded in a single-bond geometry to one Sn2+ atom.
SnCl2O2 crystallizes in the monoclinic P2_1/c space group. The structure is two-dimensional and consists of four hydrogen peroxide molecules and one SnCl2 sheet oriented in the (1, 0, 0) direction. In the SnCl2 sheet, Sn is bonded in a distorted rectangular see-saw-like geometry to four Cl atoms. There are a spread of Sn–Cl bond distances ranging from 2.61–3.02 Å. There are two inequivalent Cl sites. In the first Cl site, Cl is bonded in a water-like geometry to two equivalent Sn atoms. In the second Cl site, Cl is bonded in a water-like geometry to two equivalent Sn atoms.
Unlike single-component 2D metal halide perovskites (MHPs) exhibiting sharp excitonic photoluminescence (PL), a broadband PL emerges in mixed Pb-Sn 2D lattices. Two physical models –self-trapped exciton and defect-induced Stokes-shift – are proposed to explain this unconventional phenomenon. However, the explanations provide limited rationalizations without consideration of the formidable compositional space, and thus, the fundamental origin of broadband PL remains elusive. Herein, the high-throughput automated experimental workflow is established to systematically explore the broadband PL in mixed Pb-Sn 2D MHPs, employing PEA (Phenethylammonium) as a model cation known to work as a rigid organic spacer. Spectrally, the broadband PL becomes further broadened with rapid PEA 2 PbI 4 phase segregation with increasing Pb concentrations during early-stage crystallization. Counterintuitively, MHPs with high Pb concentrations exhibit prolonged PL lifetimes. Hyperspectral microscopy identifies substantial PEA 2 PbI 4 phase segregation in those films, hypothesizing that the establishment of charge transfer excitons by the phase segregation upon crystallization at high-Pb compositions results in distinctive PL properties. In conclusion, these results indicate that two independent mechanisms—defect-induced Stoke-shifts and the establishment of charge transfer excitons by phase segregation—coexist which significantly correlates with the Pb:Sn ratio, thereby simultaneously contributing to the broadband PL emission in 2D mixed Pb-Sn HPs.
Narrow bandgap tin-lead (NBG Sn-Pb) perovskites generally have a high density of unintentional p-type self-doping, which reduces the charge carrier lifetimes, diffusion lengths and device efficiencies. Here, we demonstrate a p-n homojunction across the Sn-Pb perovskite resulted from a gradient doping by Ba 2+ . We report that 0.1 mol% Ba 2+ can effectively compensate the p-doping of Sn-Pb perovskites or even turns it to n-type without changing its bandgap. Ba 2+ cations are found to stay at the interstitial sites and work as shallow electron donor. In addition, Ba 2+ cations show a unique heterogeneous distribution in perovskite film. Most of the barium ions stay in the top 600 nanometer region of the perovskite films and turn it into weakly n-type, while the bottom portion of the film remains to be p-type. The gradient doping forms of a homojunction from top to bottom of the perovskite films with a built-in field that facilitates extraction of photogenerated carriers, resulting an increased carrier extraction length. Furthermore, this strategy enhanced the efficiency of Sn-Pb perovskite single-junction solar cells to over 21.0% and boosted the efficiencies of monolithic perovskite-perovskite tandem solar cells to 25.3% and 24.1%, for active areas of 5.9 mm2 and 0.94 cm 2 , respectively.
Advanced battery electrodes require a cautious design of microscale particles with built-in nanoscale features to exploit the advantages of both micro- and nano-particles relative to their performance attributes. Herein, the dynamic behavior of nanosized Sn clusters and their host pores in carbon nanofiber) during sodiation and desodiation is revealed using a state-of-the-art 3D electron microscopic reconstruction technique. For the first time, the anomalous expansion of Sn clusters after desodiation is observed owing to the aggregation of clusters/single atoms. Pore connectivity is retained despite the anomalous expansion, suggesting inhibition of solid electrolyte interface formation in the sub-2-nm pores. Taking advantage of the built-in nanoconfinement feature, the CNF film with nanometer-sized interconnected pores hosting Sn clusters (≈2 nm) enables high utilization (95% at a high rate of 1 A g –1 ) of Sn active sites while maintaining an improved initial Coulombic efficiency of 87%. Finally, the findings provide insights into electrochemical reactions in a confined space and a guiding principle in electrode design for battery applications.
We performed first-principles calculations to study the 3 H diffusion in the zirconium hydrides with or without Sn impurity. Our results show that the formation of Zr 3 H x becomes preferable as the 3 H concentration increases. Based on the most stable configurations of Zr 3 H x (x = 0.5, 1.0, 1.5, 2.0), we studied the interstitial 3 H diffusion with or without Sn impurity. The results show that the interstitial 3 H diffusion becomes less probable in the hydrides with a higher 3 H concentration. When introducing a substitutional Sn impurity, the diffusion barriers increase. Therefore, the substitutional Sn in the diffusion pathway hampers the 3 H diffusion in Zr hydrides.
The single crystalline material PdSn 4 , a homologue of the Dirac nodal arc semimetal PtSn 4 , is a promising candidate to search for new topological states with fascinating quantum physical properties. In the present work, the thermochemistry and phase diagram information of the Pd–Sn system published in the literature was collected and critically reviewed, two thermodynamic reassessments of the Pd–Sn system were carried out in the frame of the CALPHAD approach to optimize the Gibbs free energy of each phase presented in the system. The liquid phase was described using respectively the Bragg-Williams random mixing model and the associate solution model. All the reliable thermodynamic property and phase equilibria data can be generally described using the presently obtained thermodynamic descriptions of the Pd–Sn system. Issues related to the further improvement of the thermodynamic descriptions of the Pd–Sn system are discussed.
Hybrid superconductor–semiconductor platforms are foundational to advancing quantum information technologies, motivating the integration of materials with clean interfaces, robust superconductivity, and scalable architectures. Here, in this work, we report the synthesis and analysis of inclined InAs nanowires, conformally coated with β-Sn shells. These nanowires extend in opposite in-plane directions, forming a self-aligned, criss-cross network. This enables the deterministic formation of nanowire-shadow Josephson junctions through angle-controlled, low-temperature Sn deposition. Structural characterization shows uniform polycrystalline β-Sn shells forming a sharp, diffusion-free interface with InAs. Low-temperature transport measurements reveal a hard induced superconducting gap ≈ 600 μeV, switching currents up to ≈ 500 nA, and parallel magnetic field resilience beyond 1T. These results establish β-Sn/InAs nanowire networks as a promising platform for superconducting qubits, low-noise microwave devices, and the exploration of exotic superconducting phases including triplet pairing and topological superconductivity.
Abstract Nb 3 Sn is a promising next-generation material for superconducting radiofrequency cavities, with significant potential for both large scale and compact accelerator applications. However, so far, Nb 3 Sn cavities have been limited to continuous wave accelerating fields <18 MV m −1 . In this paper, new results are presented with significantly higher fields, as high as 24 MV m −1 in single cell cavities. Results are also presented from the first ever Nb 3 Sn-coated 1.3 GHz 9-cell cavity, a full-scale demonstration on the cavity type used in production for the European XFEL and LCLS-II. Results are presented together with heat dissipation curves to emphasize the potential for industrial accelerator applications using cryocooler-based cooling systems. The cavities studied have an atypical shiny visual appearance, and microscopy studies of witness samples reveal significantly reduced surface roughness and smaller film thickness compared to typical Nb 3 Sn films for superconducting cavities. Possible mechanisms for increased maximum field are discussed as well as implications for physics of RF superconductivity in the low coherence length regime. Outlook for continued development is presented.
To design materials for extreme applications, it is important to understand and predict phase transitions and their influence on material properties under high pressures and temperatures. Atomistic modeling can be a useful tool to assess these behaviors. However, this can be difficult due to the lack of fidelity of the interatomic potentials in reproducing this high pressure and temperature extreme behavior. Here, in this work, a hybrid EAM-R—which is the combination of embedded atom method (EAM) and rapid artificial neural network potential—for Tin (Sn) is described which is capable of accurately modeling the complex sequence of phase transitions between different metallic polymorphs as a function of pressure. This hybrid approach ensures that a basic empirical potential like EAM is used as a lower energy bound. By using the final activation function, the neural network contribution to energy must be positive, assuring stability over the whole configuration space. This implementation has the capacity to reproduce density functional theory results at 6 orders of magnitude slower than a pair potential for molecular dynamics simulation, including elastic and plastic characteristics and relative energies of each phase. Using calculations of the Gibbs free energy, it is demonstrated that the potential precisely predicts the experimentally observed phase changes at temperatures and pressures across the whole phase diagram. At 10.2 GPa, the present potential predicts a first-order phase transition between body-centered tetragonal (BCT) β-Sn and another polymorph of BCT-Sn. This structure transforms into body-centered cubic near the experimentally reported value at 33 GPa. Thus, the Sn potential developed in this paper can be used to study complex deformation mechanisms under extreme conditions of high pressure and strain rates unlike existing potentials. Moreover, the framework developed in this paper can be extended for different material systems with complex phase diagrams.
Abstract BACKGROUND The conversion of glucose into 5‐hydroxymethylfurfural (5‐HMF) involves the isomerization of glucose to fructose catalyzed by Lewis acid and subsequent dehydration of fructose catalyzed by Brönsted acid. In this work, in order to obtain a high yield of 5‐HMF, a series of Sn‐Al‐Beta catalysts containing both Lewis and Brönsted acid sites were prepared by a convenient solid state ion exchange (SSIE) method using partially dealuminated Beta zeolite and tin(II) acetate. RESULTS The obtained bifunctional catalysts were investigated for one‐pot production of 5‐HMF from glucose in the ionic liquid (IL) [C 4 mim]Cl. Among various catalysts, Sn‐Al‐Beta‐ 4 ‐ 8 exhibited the best catalytic performance, giving a 5‐HMF yield of 54% under optimal reaction conditions (393 K, 2 h), along with a glucose conversion of 81%. The Sn‐Al‐Beta‐ 4‐8 catalyst and IL were regenerated by the extraction of 5‐HMF, and the reactivity was reserved after five runs of recycling. In addition to glucose, the Sn‐Al‐Beta‐ 4‐8 /[C 4 mim]Cl system was also proven to have the potential to effectively convert other carbohydrates into 5‐HMF. CONCLUSION The results suggested that the catalyst is convenient to prepare and has preferable efficiency and stability in the conversion of carbohydrates into 5‐HMF. © 2022 Society of Chemical Industry (SCI).
The melt flow in an Al-50vol.% Sn immiscible alloy, produced by single-track laser melting of Al and Sn elemental powders, was studied in real time. High-speed synchrotron X-ray imaging was used to track Al and Sn liquids’ movements, and also to examine elemental distributions in the laser tracks, complimented by electron microscopy after solidification. Key aspects, including melt pool geometry, keyhole instability, and flow dynamics (flow pattern and velocity), were examined using digital image analysis. Relatively deeper melt pools formed at 400 W and 300 mm/s exhibited greater stability, with smooth surfaces, consistent outward flow, and minor vortices near the keyhole. In contrast, shallower pools produced at higher scanning speeds (>500 mm/s) demonstrated greater instability with increased surface waviness, and stronger velocity fluctuations, leading to numerous micro-vortices and increased Al-Sn heterogeneity. Velocity scale estimations, supported by experimental observations, examined the roles of vapour pressure, Marangoni effect, buoyancy, inertial, and surface tension forces in the flow. The results revealed that vapour pressure and mechanical waves dominated at high scanning speeds (shallow pools), while Marangoni forces were equally significant in deep pools at lower speeds (300 mm/s). Buoyancy was found to have minimal impact in both cases. Furthermore, the interaction between inertial and surface tension forces played a critical role in determining the degree of waviness of the pools’ surfaces. These findings offer valuable insights into melt pool dynamics during laser processing of immiscible alloys and other metallic systems using elemental powders, and provide guidance for developing high-fidelity computational fluid dynamics models.
In this work, we investigate the high-temperature phase of the kagome metal ScV 6 Sn 6 using scanning tunneling microscopy/spectroscopy (STM/S) and density functional theory calculations. STM topographic images of the cleaved sample reveal two distinct surface terminations: flat islands with Sn termination and trenches terminated by kagome layers with Sn as the outermost atomic layer. STS measurements on the Sn-terminated and kagome-terminated surfaces show significant differences, in particular the presence of large density of states near the Fermi level in the former case. Our first-principles calculations reveal that the charge density on the kagome-terminated surface gives rise to “ghost states” which show intensity away from surface atoms, arising due to hybridization of orbitals above the surface. These states can obscure the intrinsic properties of the surface, potentially leading to misattribution of the surface termination. This underscores the need for careful interpretation in STM studies, especially when discerning surface states of localized states. Understanding the surface structure of this versatile quantum material provides essential information for interpreting surface-sensitive experiments, tailoring material properties, engineering interfaces, and controlling stability and reactivity. This knowledge paves the way for further exploration and potential applications of kagome lattice materials in various fields, including quantum computing, topological physics, and advanced electronic devices.
Highly efficient recovery of Nd into liquid metals of Bi and Sn was achieved in molten LiCl-KCl-NdCl 3 electrolyte at 773–973 K by leveraging the strong interactions of Nd with liquid metals. Based on the emf measurements of Nd-Sn and Nd-Bi alloys, the activity values of Nd were determined as low as 1.1–5.8×10 –13 in both liquid metals at 973 K while the solubility of Nd was found to be 1.46 mol% in Sn and 5.65 mol% in Bi. Both liquid metals demonstrated high round-trip coulombic efficiencies (>99.3%) during deposition-removal cycles of 10–50 mA cm –2 and high recovery capacity up to approximately 20 mol% Nd beyond the solubility limit. In addition, a high Nd recovery yield (84–90%) with respect to the applied charge was confirmed based on chemical analysis of electrolysis products in Bi after constant current electrolysis (–50 mA cm –2 ) at 873–973 K. Overpotentials during the Nd deposition process were attributed to charge-transfer and mass-transport resistances based on the current-potential curve and electrochemical impedance spectroscopy. The charge-transfer kinetics of Nd deposition into liquid metals was facile with high exchange current densities at ~220 mA cm –2 . Finally, the exceptionally high recovery efficiency for Nd in the molten chloride is thought to result from strong chemical interactions (i.e., low activity) of Nd in liquid metals that encourage one-step reduction, i.e., Nd 3+ + 3e → Nd(in Bi or Sn) by effectively suppressing side reaction pathways from multivalent states (Nd 2+ and Nd 3+ ).