Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Simulation software”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

Grasping objects autonomously in simulated KC-135 zero-g

The KC-135 aircraft was chosen for simulated zero gravity testing of the Extravehicular Activity Helper/retriever (EVAHR). A software simulation of the EVAHR hardware, KC-135 flight dynamics, collision detection and grasp inpact dynamics has been developed to integrate and test the EVAHR software prior to flight testing on the KC-135. The EVAHR software will perform target pose estimation, tracking, and motion estimation for rigid, freely rotating, polyhedral objects. Manipulator grasp planning and trajectory control software has also been developed to grasp targets while avoiding collisions.

Norsworthy, Robert S.↗
DOE OSTI2024

Spinbox: tools for many-body quantum systems in a Monte Carlo context

Spinbox is a piece of software that facilitates quantum mechanical calculations relevant to Monte Carlo simulation of atomic nuclei. At the front lines of research on the nuclear many-body problem are a large number of supercomputer-scale simulation codes. These codes produce valuable results but can be hard to understand, especially for those without intimate knowledge of the relevant theoretical methods. Thus, tools that fill pedagogical roles are extremely valuable. Spinbox makes it easy for one to replicate and analyze the computational processes relevant to a Quantum Monte Carlo (QMC) simulation that may be difficult to understand/debug/analyze due to the scale of the corresponding simulation software. Spinbox is written in Python using other state-of-the-art Python modules for numerical calculations. While a number of Python libraries exist that are suited to general quantum many-body calculations, the motivation of Spinbox is quite particular. In Diffusion Monte Carlo methods (DMC, GFMC, AFDMC), the central calculation is the imaginary-time propagation of individual samples of the many-body wavefunction. Although quantum wavefunctions generally must be described by a probability distribution over a basis, DMC imbues particles (within one sample) with classical spatial coordinates. This method is unusual, so other Python packages are typically not set up to do this easily. Furthermore, the software has built-in options for nuclear systems assuming isospin symmetry, which can be set up with other libraries but is a nontrivial process to do so. Features: - numerical representation of samples of the many-body wavefunctions, including tensor-product states (used in AFDMC) - numerical representation of many-body operators, including tensor-product operators: general, spin, imaginary-time propagation, etc. - the correct associated arithmetic and algebra, implemented as class methods - classes for representing realistic nuclear two- and three-body Hamiltonians (e.g. Argonne V18, Illinois NNN) - large-scale parallel integration over random variables, crucial for the AFDMC method My goal is to make this package open source so that anyone may use it and contribute to it, particularly other researchers doing AFDMC calculations

Fox, Jordan↗
NASA NTRS1990

Facilitating researcher use of flight simulators

Researchers conducting experiments with flight simulators encounter numerous obstacles in bringing their ideas to the simulator. Research into how these simulators could be used more efficiently is presented. The study involved: (1) analyzing the Advanced Concepts Simulator software architecture, (2) analyzing the interaction between the researchers and simulation programmers, and (3) proposing a documentation tool for the researchers.

Russell, C. Ray↗
NASA NTRS1990

Advanced data management system architectures testbed

The objective of the Architecture and Tools Testbed is to provide a working, experimental focus to the evolving automation applications for the Space Station Freedom data management system. Emphasis is on defining and refining real-world applications including the following: the validation of user needs; understanding system requirements and capabilities; and extending capabilities. The approach is to provide an open, distributed system of high performance workstations representing both the standard data processors and networks and advanced RISC-based processors and multiprocessor systems. The system provides a base from which to develop and evaluate new performance and risk management concepts and for sharing the results. Participants are given a common view of requirements and capability via: remote login to the testbed; standard, natural user interfaces to simulations and emulations; special attention to user manuals for all software tools; and E-mail communication. The testbed elements which instantiate the approach are briefly described including the workstations, the software simulation and monitoring tools, and performance and fault tolerance experiments.

Grant, Terry↗
NASA NTRS1999

A Further Look at X-33 Entry Guidance and Beyond

An entry guidance design developed at Iowa State University (ISU) for the X-33 advanced technology demonstrator is outlined and compared with the X-33 entry guidance algorithms developed at NASA Marshall. Both designs are based on the Space Shuttle entry guidance concept, but significant improvements have been made to enhance the performance and reduce the complexity. The ISU design was incorporated into MAVERIC, a high fidelity vehicle simulation software for the X-33, and evaluated in Monte Carlo simulations against random dispersions in propulsion system, wind and atmospheric properties, aerodynamic coefficients, interaction between propulsion and aerodynamics, and navigation data. The simulations clearly demonstrated the capability and precision of the ISU entry guidance design in successfully guiding the X-33 in some rather difficult flight scenarios. As the entry guidance development for the X-33 is completing, this report also offers some review of the strength and limitations of the current Shuttle-based entry guidance framework, and finally some potential candidates for next generation of more capable and cost-effective entry guidance designs are discussed.

Lu, Ping↗
DOE OSTI2026

MixPI: Mixed-time slicing path integral software for quantized molecular dynamics simulations

We introduce the MixPI software to implement path integral molecular dynamics (PIMD) simulations for the study of condensed phase systems where nuclear quantum effects (NQEs) are important. In contrast to existing PIMD simulation software, MixPI enables the implementation of mixed quantum–classical path integral simulations where only a subset of system degrees of freedom (dofs) are treated quantum mechanically in an extended phase space while the remaining dofs are described classically. We expect this software to be particularly useful for simulations of electron and proton transfer in condensed phase systems, as well as for the study of biological and material systems where only a handful of dofs contribute significantly to the observed NQEs. We demonstrate the use of MixPI in two different systems. The first is a simple water model where we implement a set of mixed quantum–classical simulations to compute average energy and radial distribution functions. We use these simulations to benchmark the effectiveness of MixPI and to demonstrate how it enables systematic investigation into the origin of observed NQEs. We then compute radial distribution functions for a system where MixPI is essential: a solvated metal (M 2+ ) cation described using an explicit quantized electron localized on an M 3+ ion in water.

chemical physics↗
NASA NTRS2001

Simulation of MC-1 Engine on Real-Time Station

The MC-1 rocket engine is a new, 60,000-pound-thrust engine designed to boost small spacecraft carrying payloads weighing up to 500 pounds. The engine was designed in-house at NASA's Marshall Space Flight Center (MSFC) in Huntsville, Alabama, and built by SUMMA Technology, Inc. A vital part of the success of the engine development was the verification of the Propulsion System Controller (PSC) used to control the MC-1 engine during development testing at test facilities in Mississippi and California. The MC-1 engine simulation software was developed on the Applied Dynamics, Inc.'s Real-Time Station (RTS) computer system (ESL) to verify the PSC's hardware and software performance in the Marshall Avionics System Testbed's (MAST) Engine Simulation Lab at the MSFC. The engine model includes the simulation of pressure transducers, thermocouple sensors and valve-positions.

Ly, William↗
DOE OSTI2021

Predicting Deformation of Parts from HP Printers due to Sintering with Modeling and Simulation (CRADA NFE-18-07363)

This work proposes to leverage Oak Ridge National Laboratory’s (ORNL) sintering simulation software developed at the Manufacturing Demonstration Facility to 1) investigate the deformation of sintered parts and 2) to develop fast surrogate-based optimization methods for HP Inc. This includes the development of ORNL’s software on HP systems, integration and testing with HP part geometries and material properties, the development of surrogate models based on the results of the simulation, and modifications to the software based on feedback from HP. The expected impacts of this work are a drastic reduction in print costs, an increase in printer throughput, and the identification of novel, possibly exotic materials for 3D printing. This work will also decrease the time to market for HP’s print technology by decreasing the amount of resources and type dedicated to physical testing.

42 ENGINEERING↗
DOE OSTI2023

FLORIS v3.5 Wake Modeling and Wind Farm Controls Software [SWR-17-43 and SWR-14-20]

FLORIS is a controls-focused wind farm simulation software incorporating steady-state engineering wake models into a performance-focused Python framework. It has been in active development at NREL since 2013 and the latest release is FLORIS v3.5.Online documentation is available at https://nrel.github.io/floris. The software is in active development and engagement with the development team is highly encouraged. If you are interested in using FLORIS to conduct studies of a wind farm or extending FLORIS to include your own wake model, please join the conversation in GitHub Discussions! https://www.nrel.gov/wind/floris.html

Fleming, Paul↗
NASA NTRS1994

Hardware interface for isolation of vibrations in flexible manipulators: Development and applications

NASA's Langley Research Center (LaRC) is addressing the problem of isolating the vibrations of the Shuttle remote manipulator system (RMS) from its end-effector and/or payload by modeling an RMS flat-floor simulator with a dynamic payload. Analysis of the model can lead to control techniques that will improve the speed, accuracy, and safety of the RMS in capturing satellites and eventually facilitate berthing with the space station. Rockwell International Corporation, also involved in vibration isolation, has developed a hardware interface unit to isolate the end-effector from the vibrations of an arm on a Shuttle robotic tile processing system (RTPS). To apply the RTPS isolation techniques to long-reach arms like the RMS, engineers have modeled the dynamics of the hardware interface unit with simulation software. By integrating the Rockwell interface model with the NASA LaRC RMS simulator model, investigators can study the use of a hardware interface to isolate dynamic payloads from the RMS. The interface unit uses both active and passive compliance and damping for vibration isolation. Thus equipped, the RMS could be used as a telemanipulator with control characteristics for capture and berthing operations. The hardware interface also has applications in industry.

Manouchehri, Davoud↗
NASA NTRS2000

Modeling of Nonacoustic Combustion Instability in Simulations of Hybrid Motor Tests

A transient model of a hybrid motor was formulated to study the cause and elimination of nonacoustic combustion instability. The transient model was used to simulate four key tests out of a series of seventeen hybrid motor tests conducted by Thiokol, Rocketdyne, and Martin Marietta at NASA Marshall Space Flight Center (MSFC). These tests were performed under the Hybrid Propulsion Technology for Launch Vehicle Boosters (HPTLVB) program. The first test resulted in stable combustion. The second test resulted in large-amplitude, 6.5-Hz chamber pressure oscillations that gradually damped away by the end of the test. The third test resulted in large-amplitude, 7.5-Hz chamber pressure oscillations that were sustained throughout the test. The seventh test resulted in elimination of combustion instability with the installation of an orifice immediately upstream of the injector. Formulation and implementation of the model are the scope of this presentation. The current model is an independent continuation of modeling presented previously by joint Thiokol-Rocketdyne collaborators Boardman, Hawkins, Wassom. and Claflin. The previous model simulated an unstable independent research and development (IR&D) hybrid motor test performed by Thiokol. There was very good agreement between the model and test data. Like the previous model, the current model was developed using Matrix-x simulation software. However, tests performed at MSFC under the HPTLVB program were actually simulated. ln the current model, the hybrid motor, consisting of the liquid oxygen (lox) injector, the multiport solid fuel grain, and nozzle, was simulated. The lox feedsystem, consisting of the tank, venturi. valve, and feed lines, was also simulated in the model. All components of the hybrid motor and lox feedsystem are treated by a lumped-parameter approach. Agreement between the results of the transient model and actual test data was very good. This agreement between simulated and actual test data indicated that the combustion instability in the hybrid motor was due to two causes: 1. a lox feed system of insufficient stiffness, and 2. a lox injector with an impedance (it pressure drop that was too low to provide damping against the feed system oscillations. Also, it was discovered that testing with a new grain of solid fuel sustained the combustion instability. However, testing with a used grain of solid fuel caused the combustion instability to gradually decay.

Rocker, M.↗
NASA NTRS2019

X-57 60kW Permanent Magnet Synchronous Cruise Motor Finite Element Electromagnetic Modeling

The X-57 60kW Permanent Magnet Synchronous Motor for cruise applications was modeled utilizing a two-dimensional electromagnetics simulation software called Finite Element Method Magnets (FEMM, D. Meeker). Through FEMM, the simulated induction and torque characteristics of the X-57 PMSM were obtained. These parameters and other values were compared to actual static laboratory measurements. A three-dimensional electromagnetic model of the X-57 cruise motor was created utilizing OperaFEA (Dassault Systemes SE, Velizy-Villacoublay, France). Torque, RPM, power, resistance, and inductance characteristics were examined along with establishing work to begin examining heat flow and heat dissipation for efficiency purposes.

Marrufo, Marco↗
NASA NTRS2020

Fit2Fly: A Proof of Concept for Testing the Commercial Feasibility of Unmanned Aerial System Operations

As autonomous Unmanned Aerial Systems (UAS) become more prevalent, improvements in airworthiness assessments, data security, establishing vehicle trust, and more will become necessary to make fleet operations of these systems routine. Currently, these are verified for every UAS vehicle through a time-intensive manual inspection performed by human individuals. This process becomes infeasible when introduced into large-scale operations, so the Fit2Fly project is attempting to address these concerns. Fit2Fly is a multi-year project with a large scope, so we chose to narrow our focus to building a proof-of-concept feasibility simulation in tandem with physical UAS demonstration. This work resulted in a software simulation capable of running asynchronous commercial operations with persistent data modeling in coordination with several autonomous drones using integrated radio and GPS configurations.

Ryan Bonk↗
NASA NTRS1986

Distributed control for COFS 1

An overview is given of the work being done at NASA LaRC on developing the Control of Flexible Structures (COFS) 1 Flight Experiment Baseline Control Law. This control law currently evolving to a generic control system software package designed to supply many, but not all, guest investigators. A system simulator is also described. It is currently being developed for COFS-1 and will be used to develop the Baseline Control Law and to evaluate guest investigator control schemes. It will be available for use whether or not control schemes fall into the category of the Baseline Control Law. First, the hardware configuration for control experiments is described. This is followed by a description of the simulation software. Open-loop sinusoid excitation time histories are next presented both with and without a local controller for the Linear DC Motor (LDCM) actuators currently planned for the flight. The generic control law follows and algorithm processing requirements are cited for a nominal case of interest. Finally, a closed-loop simulation study is presented, and the state of the work is summarized in the concluding remarks.

Montgomery, R. C.↗
NASA NTRS2016

Modeling SMAP Spacecraft Attitude Control Estimation Error Using Signal Generation Model

Two ground simulation software are used to model the SMAP spacecraft dynamics. The CAST software uses a higher fidelity model than the ADAMS software. The ADAMS software models the spacecraft plant, controller and actuator models, and assumes a perfect sensor and estimator model. In this simulation study, the spacecraft dynamics results from the ADAMS software are used as CAST software is unavailable. The main source of spacecraft dynamics error in the higher fidelity CAST software is due to the estimation error. A signal generation model is developed to capture the effect of this estimation error in the overall spacecraft dynamics. Then, this signal generation model is included in the ADAMS software spacecraft dynamics estimate such that the results are similar to CAST. This signal generation model has similar characteristics mean, variance and power spectral density as the true CAST estimation error. In this way, ADAMS software can still be used while capturing the higher fidelity spacecraft dynamics modeling from CAST software.

Soil Moisture Active Passive↗
NASA NTRS2010

Unified Approach to Modeling and Simulation of Space Communication Networks and Systems

Network simulator software tools are often used to model the behaviors and interactions of applications, protocols, packets, and data links in terrestrial communication networks. Other software tools that model the physics, orbital dynamics, and RF characteristics of space systems have matured to allow for rapid, detailed analysis of space communication links. However, the absence of a unified toolset that integrates the two modeling approaches has encumbered the systems engineers tasked with the design, architecture, and analysis of complex space communication networks and systems. This paper presents the unified approach and describes the motivation, challenges, and our solution - the customization of the network simulator to integrate with astronautical analysis software tools for high-fidelity end-to-end simulation. Keywords space; communication; systems; networking; simulation; modeling; QualNet; STK; integration; space networks

Barritt, Brian↗
NASA NTRS2013

Automatic Parameter Tuning for the Morpheus Vehicle Using Particle Swarm Optimization

A high fidelity simulation using a PC based Trick framework has been developed for Johnson Space Center's Morpheus test bed flight vehicle. There is an iterative development loop of refining and testing the hardware, refining the software, comparing the software simulation to hardware performance and adjusting either or both the hardware and the simulation to extract the best performance from the hardware as well as the most realistic representation of the hardware from the software. A Particle Swarm Optimization (PSO) based technique has been developed that increases speed and accuracy of the iterative development cycle. Parameters in software can be automatically tuned to make the simulation match real world subsystem data from test flights. Special considerations for scale, linearity, discontinuities, can be all but ignored with this technique, allowing fast turnaround both for simulation tune up to match hardware changes as well as during the test and validation phase to help identify hardware issues. Software models with insufficient control authority to match hardware test data can be immediately identified and using this technique requires very little to no specialized knowledge of optimization, freeing model developers to concentrate on spacecraft engineering. Integration of the PSO into the Morpheus development cycle will be discussed as well as a case study highlighting the tool's effectiveness.

Birge, B.↗