SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Seven glasses with an alkali oxide content in the range 9.57 to 29.53 mole percent were investigated. The temperature at which the transition of microheterogeneous mixing to the condition of mutual solubility occurs on heating is found. It is found that the altered constituent composition results in the alteration in the percentage amount of the coexisting phases.
Previously reported nitrogen distributions in SiO2 films on Si which have been thermally nitrided at 1000 C have been explained by a kinetic model of the nitridation process which rests upon the effects of interfacial strain. A critical test of this kinetic model is the validity of the predictions regarding nitrogen distributions obtained at other nitridation temperatures. In this work, nitrogen distributions determined via X-ray photoelectron spectroscopy are reported for samples nitrided at 800 and 1150 C, and are shown to be consistent with the kinetic model. In addition, the intensity of a fluorine marker is found to correlate with the nitrogen distribution, and is postulated to be related to kinetically generated defects in the dielectric film, consistent with the strain-dependent energy of formation of defects proposed recently to explain electrical data.
Commercially applied SiOx was evaluated as a protective coating for the polyimide Kapton solar array blankets for Space Station Freedom. Three different rolls of coated material were tested in a plasma asher to determine their durability to attack by atomic oxygen. Mass loss data indicated that all of the coatings tested would structurally survive for 15 years in LEO (low earth orbit), except for one which had several uncoated lines across the sample which were caused by ridgelanes in the Kapton. It appears that the size rather than number of defects alone effects the mass loss the most. Careful handling of the material after coating and during processing may be critical for array survival.
Kapton polyimide wiring insulation was found to be vulnerable to pyrolization, arc tracking, and flashover when momentary short-circuit arcs have occurred on aircraft power systems. Short-circuit arcs between wire pairs can pyrolize the polyimide resulting in a conductive char between conductors that may sustain the arc (arc tracking). Furthermore, the arc tracking may spread (flashover) to other wire pairs within a wire bundle. Polyimide Kapton will also be used as the insulating material for the flexible current carrier (FCC) of Space Station Freedom (SSF). The FCC, with conductors in a planar type geometric layout as opposed to bundles, is known to sustain arc tracking at proposed SSF power levels. Tests were conducted in a vacuum bell jar that was designed to conduct polyimide pyrolysis, arc tracking, and flashover studies on samples of SSF's FCC. Test results will be reported concerning the minimal power level needed to sustain arc tracking and the FCC susceptibility to flashover. Results of the FCC arc tracking tests indicate that only 22 volt amps were necessary to sustain arc tracking (proposed SSF power level is 400 watts). FCC flashover studies indicate that the flashover event is highly unlikely.
Improved seasonal forecasts of Arctic sea ice are important for regional stakeholders, but also for obtaining a better understanding of the Arctic climate system. An important part of the forecasts is the initial sea ice, ocean, and atmosphere initial conditions. I briefly give an overview of the initial conditions currently being used in seasonal sea ice predictions. I also identify available sources of observational data and prospects for coupled atmosphere/ocean reanalyses.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Sulfur poisoning of noble metal catalysts has been a major challenge for decades. This work demonstrates the superior sulfur tolerance of a hybrid zeolite-supported Pd catalyst for hydrogenation of tetralin containing benzothiophene. The hybrid catalyst consists of Pd supported on a large-pore acidic zeolite Y (Pd/HY) and a small-pore zeolite A without (Pd/HA) or with surface metal passivation by chemical vapor deposition of SiO 2 (SiO 2 -Pd/HA) and with potassium ion exchange (SiO 2 -Pd/KA). Pd/HY is very active for tetralin hydrogenation but quickly deactivates after exposure to benzothiophene at high concentration of 100 ppm sulfur. The SiO 2 -coated Pd/HA shows no activity for tetralin hydrogenation, but continues to activate H 2 and serve as a source of hydrogen spillover from Pd/HA since these metal sites are protected from thiophenic sulfur due to size-selective exclusion. Adding K ion-exchanged and SiO 2 -coated catalyst SiO 2 -Pd/KA to Pd/HY is even more effective for enhancing sulfur tolerance, both for tetralin hydrogenation and for isomerization of cis-decalin to trans-decalin in the presence of benzothiophene. The turnover frequencies (TOF) of all the catalysts are similar at the exposed sulfur/Pd atomic ratio of around 0.5. With further increase in sulfur/Pd ratio, rapid decline in TOF was observed on Pd/HY, but SiO 2 -Pd/KA + Pd/HY hybrid catalyst shows a significantly higher TOF than that over Pd/HY, even though SiO 2 -Pd/KA or SiO 2 -Pd/HA alone shows no TOF for tetralin hydrogenation. Even after high-dose poisoning at 400 ppm sulfur, the SiO 2 -Pd/KA + Pd/HY hybrid recovered activity more quickly than SiO 2 -Pd/HA + Pd/HY, while the latter in turn is much better than Pd/HY alone. These results point to the higher activity for hydrogen spillover from SiO 2 -Pd/KA where Pd metal sites are protected from not only thiophenic sulfur but also inorganic sulfur H 2 S by shape-selective exclusion. The present work further establishes the validity of shape-selective exclusion and hydrogen spillover in the design concept proposed for a sulfur-tolerant bimodal acidic zeolite-supported metal catalyst for hydrogenation of naphthalene [C.S. Song, Chemtech, 29 (1999) 26–30], and refines the design concept further for limiting the size of small pore in hybrid catalysts to~3 Å for restricting access of H 2 S but allowing entrance of H 2 . Further, this refined design concept is applicable to other supported monometallic and bimetallic catalysts.
Because of its metastable nature, silicon monoxide (SiO) consists of Si nanodomains in an amorphous matrix of SiO 2 . The microstructure of SiO, including SiO 2 , Si domains, and interphase (SiO x ) between domains, was modified via an annealing treatment in argon gas and thoroughly characterized by in-situ and ex-situ X-ray diffraction, pair distribution function, and electron energy loss spectroscopy. Two microstructure transformation routes were observed during the annealing process: (1) at a temperature of <800 °C, the annealing treatment was found to affect mainly the structural conformation of the amorphous SiO 2 matrix and the interphase, while (2) an annealing temperature of >800 °C led to significant Si nanodomain growth. Here, we found that the microstructure has a great impact on the electrochemical performance of SiO. The optimized microstructure of SiO appears to be achieved through annealing treatment at 800 °C or less, which results in interphase (SiO x ) reduction without causing significant Si domain growth. This work provides a deep insight into the domain and interphase transformation of SiO upon heat treatment. The improved understanding of the relationship between SiO microstructure and its electrochemical behavior will enable proper design and development of high-energy SiO for lithium-ion batteries.
Nanocomposites integrate functional nanofillers into viscoelastic matrices for electronics, lightweight structural materials, and tissue engineering. Herein, the effect of methacrylate-functionalized (MA-SiO 2 ) and vinyl-functionalized (V-SiO 2 ) silica nanoparticles on the thermal, mechanical, physical, and morphological characteristics of poly(ethylene glycol) (PEG) nanocomposites was investigated. The gel fraction of V-SiO 2 composites decreases upon addition of 3.8 wt% but increases with further addition (>7.4 wt%) until it reaches a plateau at 10.7 wt%. The MA-SiO 2 induced no significant changes in gel fraction and both V-SiO 2 and MA-SiO 2 nanoparticles had a negligible impact on the nanocomposite glass transition temperature and water absorption. The Young's modulus and ultimate compressive stress increased with increasing nanoparticle concentration for both nanoparticles. Due to the higher crosslink density, MA-SiO 2 composites reached a maximum mechanical stress at a concentration of 7.4 wt%, while V-SiO 2 composites reached a maximum at a concentration of 10.7 wt%. Scanning electron microscopy, transmission electron microscopy, and small-angle X-ray scattering revealed a bimodal size distribution for V-SiO 2 and a monomodal size distribution for MA-SiO 2 . Although aggregates were observed for both nanoparticle surface treatments, V-SiO 2 dispersion was poor while MA-SiO 2 were generally well-dispersed. Finally, these findings lay the framework for silica nanofillers in PEG-based nanocomposites for advanced manufacturing applications.
Abstract Silicon oxide (SiO x ) is a promising anode candidate of lithium‐ion batteries (LIBs) owing to its extremely high specific capacity. However, the low initial Coulombic efficiency (ICE) and rapid capacity degradation of SiO x , triggered by the enormous volume variation upon repeated (de)lithiation, gravely hinder its practical use. Herein, two mass‐produced micro‐sized SiO x @C composites with obviously different morphologies for commercial LIBs are reported. Particularly, the SiO x ‐graphite blended anode (SiO x @3D‐G‐Gr) based on SiO x wrapped by three‐dimensional (3D) carbon layers (SiO x @3D‐G) exhibits a capacity of 519 mAh g −1 , an ICE of 90.0 % and a capacity retention of 83.4 % at 0.2 C over 100 cycles. which is far exceeding its counterpart SiO x @C‐H‐Gr (65.7 %). The obtained impressive properties of SiO x @3D‐G originate from the critical contribution of 3D carbon layers, which serves as the effective stress buffer and protective layer as well as the strong networks for electron/Li + transport. Accordingly, the full‐cell based on SiO x @3D‐G‐Gr anode and commercial LiCoO 2 cathode delivers a capacity of 803 mAh and an excellent capacity retention of 95.6 % (616 mAh, 96.6 % for graphite, respectively) at 1 C over 100 cycles with a stabilized CE of nearly 100 %. The micro‐sized SiO x @3D‐G showing a promising prospect in the commercial‐grade anodes in LIBs.
Ruthenium (Ru) is a promising interconnect material for advanced semiconductor technologies due to its favorable scaling characteristics, including a short electron mean free path and strong electromigration resistance. In semiconductor integration, silicon oxide-based dielectrics serve as dominant insulating materials and constitute ubiquitous interfaces for metallization; however, their formation-dependent surface chemistry and its impact on Ru growth remain insufficiently explored. Here, we investigate Ru ALD on native oxide SiO x (N-SiO x ) and thermally grown SiO 2 (T-SiO 2 ) as model substrates using bis(ethylcyclopentadienyl)ruthenium(II) [Ru(EtCp) 2 ] under two distinct reactant-sequence environments: AB-type (Ru(EtCp) 2 /O 2 ) and hydrogenassisted ABC-type (Ru(EtCp) 2 /O 2 /H 2 ). Under the AB-type process, both N-SiO x and T-SiO 2 exhibit pronounced nucleation delay. N-SiO x shows earlier nucleation and higher nucleation density than T-SiO 2 , plausibly attributed to differences in surface hydroxyl populations. Similar temperature-dependent phase evolution is observed on both substrates, with mixed Ru and RuO 2 phases at 250 °C and predominantly metallic Ru at 300 °C accompanied by increased morphological roughening. In contrast, incorporating an H 2 subpulse (ABC-type) mitigates nucleation delay, particularly on hydroxyl-deficient T-SiO 2 , thereby reducing the substratedependent disparity observed under AB cycling. Moreover, RuO 2 formation is suppressed even at 250 °C on both substrates, shifting growth toward more metallic Ru with reduced resistivity (∼20 μΩ·cm at ∼ 20 nm on N-SiO x ). These trends suggest that H 2 influences the surface reaction pathway, contributing to enhanced metallic stabilization and altered early stage growth kinetics. Overall, this work clarifies the coupled roles of substrate chemistry and reactant-sequence design in governing Ru nucleation and early stage film evolution, providing insight relevant to next-generation interconnect integration and future area-selective deposition strategies.
A significant promotion effect of colloidal SiO 2 on Pd/TiO 2 catalyst for improving the activity and N 2 selectivity in the selective catalytic reduction of NO with H 2 (H 2 -SCR) was reported, both before and after hydrothermal aging. The SiO 2 addition not only benefited the formation of more oxygen vacancies but also increased Pd dispersion and created rich Pd-SiO 2 interfaces on Pd-SiO 2 /TiO 2 catalyst. The H 2 -SCR of NO on both Pd/TiO 2 and Pd-SiO 2 /TiO 2 followed a Langmuir-Hinshelwood mechanism, in which the adsorbed bridging bidentate nitrates on TiO 2 could react with dissociated H 2 species on Pd sites at Pd-TiO 2 interface. Particularly, on the promoted Pd-SiO 2 /TiO 2 , the Pd-TiO 2 interface could facilitate NO adsorption and activation, and the created Pd-SiO 2 interface could benefit H 2 adsorption and dissociation, thus contributing to its significantly improved H 2 -SCR activity. Additionally, the active Pd species (which should be Pd0 under reaction condition with higher surface concentration) within Pd-SiO 2 /TiO 2 could be well stabilized during long-term hydrothermal aging process through the formation of rich Pd-SiO 2 interfaces.
Mixed oxides are ubiquitious solid acid catalysts for a number of transformations. Here, the chemistry of mixed oxide interfaces was experimentally probed by constructing model SiO 2 on MO x interfaces using a liquid-phase, stoichiometrically-controlled deposition of tetraethyl orthosilicate (TEOS). Catalytically active Brønsted sites were generated in four series of overcoated SiO 2 on metal oxide materials prepared by depositing TEOS onto Al 2 O 3 , anatase TiO 2 , Nb 2 O 5 , and ZrO 2 . Pyridine DRIFTS studies indicate that the acidity of deposited silanol groups was enhanced by interaction with the metal oxide surface, suggesting that pseudo-bridging silanol type structures were formed. Trimethylphosphine oxide (TMPO) 31 P NMR experiments showed that Brønsted acid strength varied in the overcoated materials, with increasing strength in the following order: SiO 2 /ZrO 2 < SiO 2 /TiO 2 < SiO 2 /Nb 2 O 5 < SiO 2 /Al 2 O 3 . This order correlated with the Lewis acidity and chemical hardness of the underlying metal oxides. The catalytic performance of the materials was evaluated in the liquid-phase hydroalkoxylation of dihydropyran with n-octanol, revealing that activity was highly dependent on SiO 2 loading, which impacted the density of acid sites, and scaled exponentially with Brønsted acid strength, determined by the core metal oxide identity. Brønsted acid strength appears to be the key driver of the materials’ activity, with the highest areal rate of 2.2 mmol / m 2 – h being measured over SiO 2 /Al 2 O 3 . Furthermore, this study shows that SiO 2 -overcoated materials are a systematically tunable class of catalysts that can be applied to acid catalyzed reactions.
We report high spatial resolution VLA observations of the low-mass star-forming region IRAS 16293-2422 using four molecular probes: ethyl cyanide (CH3CH2CN)) methyl formate (CH3OCHO), formic acid (HCOOH), and the ground vibrational state of silicon monoxide (SiO). Ethyl cyanide emission has a spatial scale of approx. 20" and encompasses binary cores A and B as determined by continuum emission peaks. Surrounded by formic acid emission, methyl formate emission has a spatial scale of approx. 6" and is confined to core B. SiO emission shows two velocity components with spatial scales less than 2" that map approx. 2" northeast of the A and B symmetry axis. The redshifted SiO is approx. 2" northwest of blueshifted SiO along a position angle of approx. 135deg which is approximately parallel to the A and B symmetry axis. We interpret the spatial position offset in red and blueshifted SiO emission as due to rotation of a protostellar accretion disk and we derive approx. 1.4 Solar Mass, interior to the SiO emission. In the same vicinity, Mundy et al. (1986) also concluded rotation of a nearly edge-on disk from OVRO observations of much stronger and ubiquitous CO-13 emission but the direction of rotation is opposite to the SiO emission findings. Taken together, SiO and CO-13 data suggest evidence for a counter-rotating disk. Moreover, archival BIMA array CO-12C data show an inverse P Cygni profile with the strongest absorption in close proximity to the SiO emission, indicating unambiguous material infall toward the counter-rotating protostellar disk at a new source location within the IRAS 16293-2422 complex. The details of these observations and our interpretations are discussed.
Robust synthesis of small colloidal silica (SiO 2 ) nanoparticles with narrow size distributions (<5%) is challenging because the possible involvement of continuous nucleation and growth of SiO 2 in the widely used Stöber process usually results in silica nanoparticles with large sizes and broad size distributions. Promoting heterogeneous nucleation and growth of silica is promising to tackle the challenges by in-situ forming transient colloidal seeds that provide nucleation surfaces for silica condensate. Here in this work, poly(acrylic acid) (PAA) is introduced to the Stöber synthesis solutions, which are usually composed of ethanol (containing a trace amount of water), tetraethyl orthosilicate (TEOS), and ammonia, to mediate the nucleation of TEOS hydrolysates and growth of SiO 2 nanoparticles. PAA reacts with ammonia to form soft PAA-NH 3 complex colloids that serve as transient seeds to facilitate heterogeneous nucleation and growth of SiO 2 nanoparticles after adding TEOS to the synthesis solution. The number of PAA-NH 3 complex colloidal particles, which strongly depends on the molar ratio of PAA and ammonia, determines the number of the resulting SiO 2 nanoparticles and thus the size of the SiO 2 nanoparticles correspondingly according to the supply of TEOS. Highly uniform SiO 2 nanoparticles with finely tuned diameters in the sub-100 region have been successfully synthesized, and the synthesis protocol is feasible to be scaled up while maintaining the high quality of SiO 2 nanoparticles.
Abstract Magnesite (MgCO 3 ) entering the lower mantle together with the subducted oceanic crust is an important carbon carrier. The reaction between magnesite and mantle minerals has been documented, but its influence on the density and velocity profiles of lower mantle remains unexplored. To decipher the deep carbon transportation and its associated effect, here we determined the thermal equations of state of magnesite up to 120 GPa and 2600 K using X‐ray diffraction in laser‐heated diamond anvil cells. The obtained thermal elastic parameters of magnesite facilitated a comprehensive understanding on the influence of magnesite‐SiO 2 reaction, variation of carbon and SiO 2 content, and temperature on the origin of lower‐mantle scatterers at 1,000–1,800 km depth. Our modeling revealed that the depth of the lower‐mantleV S scatterers is mainly controlled by the Al 2 O 3 content in SiO 2 , while its magnitude depends on the SiO 2 content. Along normal geotherm, the magnesite‐SiO 2 reaction would occur before the post‐stishovite transition, consuming substantial SiO 2 in the subducted oceanic crust. Depending on the amount of residual SiO 2 , the post‐stishovite transition can produce a 2.5–5.2 (2)%V S reduction, compatible with the observed seismic scatterers in Izu‐Bonin and Mariana subduction zones. Along slab geotherm, this reaction occurs after the post‐stishovite transition, generating a greaterV S reduction of 4.4–6.4 (4)%. We thus propose that the reaction between sinking MgCO 3 and SiO 2 in the slab is one of the potential factors influencing the magnitude of the lower‐Vs scatterers at 1,000–1,900 km depth. Our results provide new insights into the deep‐mantle carbonate transportation influencing regional geophysics.
The deposition of a 2.0 µm SiO 2 film on the alumina surface in Kovar TM /94% alumina joints enables the formation of a silicide reaction layer on the alumina during brazing with 97Ag2Zr1Cu. Additionally, the average and standard deviation of joint thickness decrease from 50 to 15 and 29 to 4 µm, respectively compared to joints without added SiO 2 . Finally, the average failure stress of these braze joints was 45 MPa, while that of similar joints without added SiO 2 was 90 MPa. Sessile drop experiments of 98Ag2Zr on SiO 2 and 99.6% Al 2 O 3 substrates show that the braze wets and spreads to 3x its original area on SiO 2 with a wetting angle near 0°, but remains the same area on 99.6% Al 2 O 3 with a wetting angle of 106.6°. Focused-ion-beam scanning electron microscopy analysis of a cross-section of the 98Ag2Zr sessile drop on the SiO 2 substrate has shown that Zr reacts with SiO 2 to form Zr oxide and silicide layers. Scanning transmission electron microscopy diffraction and energy dispersive X-ray spectroscopy analysis indicate this silicide layer contains tetragonal Zr 5 Si 4 . In conclusion, analysis shows the silicide layer enhances wetting and joint uniformity while unreacted SiO 2 embrittles the joint and degrades strength.