Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SYSTEMS MODELING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS2005

Electric Propulsion System Modeling for the Proposed Prometheus 1 Mission

The proposed Prometheus 1 spacecraft would utilize nuclear electric propulsion to propel the spacecraft to its ultimate destination where it would perform its primary mission. As part of the Prometheus 1 Phase A studies, system models were developed for each of the spacecraft subsystems that were integrated into one overarching system model. The Electric Propulsion System (EPS) model was developed using data from the Prometheus 1 electric propulsion technology development efforts. This EPS model was then used to provide both performance and mass information to the Prometheus 1 system model for total system trades. Development of the EPS model is described, detailing both the performance calculations as well as its evolution over the course of Phase A through three technical baselines. Model outputs are also presented, detailing the performance of the model and its direct relationship to the Prometheus 1 technology development efforts. These EP system model outputs are also analyzed chronologically showing the response of the model development to the four technical baselines during Prometheus 1 Phase A.

Fiehler, Douglas↗
NASA NTRS1992

Comprehensive system models: Strategies for evaluation

The task of evaluating comprehensive earth system models is vast involving validations of every model component at every scale of organization, as well as tests of all the individual linkages. Even the most detailed evaluation of each of the component processes and the individual links among them should not, however, engender confidence in the performance of the whole. The integrated earth system is so rich with complex feedback loops, often involving components of the atmosphere, oceans, biosphere, and cryosphere, that it is certain to exhibit emergent properties very difficult to predict from the perspective of a narrow focus on any individual component of the system. Therefore, a substantial share of the task of evaluating comprehensive earth system models must reside at the level of whole system evaluations. Since complete, integrated atmosphere/ ocean/ biosphere/ hydrology models are not yet operational, questions of evaluation must be addressed at the level of the kinds of earth system processes that the models should be competent to simulate, rather than at the level of specific performance criteria. Here, we have tried to identify examples of earth system processes that are difficult to simulate with existing models and that involve a rich enough suite of feedbacks that they are unlikely to be satisfactorily described by highly simplified or toy models. Our purpose is not to specify a checklist of evaluation criteria but to introduce characteristics of the earth system that may present useful opportunities for model testing and, of course, improvement.

Field, Christopher↗
DOE OSTI2025

A Fortran–Python interface for integrating machine learning parameterization into earth system models

Abstract. Parameterizations in earth system models (ESMs) are subject to biases and uncertainties arising from subjective empirical assumptions and incomplete understanding of the underlying physical processes. Recently, the growing representational capability of machine learning (ML) in solving complex problems has spawned immense interests in climate science applications. Specifically, ML-based parameterizations have been developed to represent convection, radiation, and microphysics processes in ESMs by learning from observations or high-resolution simulations, which have the potential to improve the accuracies and alleviate the uncertainties. Previous works have developed some surrogate models for these processes using ML. These surrogate models need to be coupled with the dynamical core of ESMs to investigate the effectiveness and their performance in a coupled system. In this study, we present a novel Fortran–Python interface designed to seamlessly integrate ML parameterizations into ESMs. This interface showcases high versatility by supporting popular ML frameworks like PyTorch, TensorFlow, and scikit-learn. We demonstrate the interface's modularity and reusability through two cases: an ML trigger function for convection parameterization and an ML wildfire model. We conduct a comprehensive evaluation of memory usage and computational overhead resulting from the integration of Python codes into the Fortran ESMs. By leveraging this flexible interface, ML parameterizations can be effectively developed, tested, and integrated into ESMs.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2004

NASA Glenn Wind Tunnel Model Systems Criteria

This report describes criteria for the design, analysis, quality assurance, and documentation of models that are to be tested in the wind tunnel facilities at the NASA Glenn Research Center. This report presents two methods for computing model allowable stresses on the basis of the yield stress or ultimate stress, and it defines project procedures to test models in the NASA Glenn aeropropulsion facilities. Both customer-furnished and in-house model systems are discussed. The functions of the facility personnel and customers are defined. The format for the pretest meetings, safety permit process, and model reviews are outlined. The format for the model systems report (a requirement for each model that is to be tested at NASA Glenn) is described, the engineers responsible for developing the model systems report are listed, and the timetable for its delivery to the project engineer is given.

Soeder, Ronald H.↗
DOE OSTI2017

Significant inconsistency of vegetation carbon density in CMIP5 Earth system models against observational data

Abstract Earth system models (ESMs) have been widely used for projecting global vegetation carbon dynamics, yet how well ESMs performed for simulating vegetation carbon density remains untested. We compiled observational data of vegetation carbon density from literature and existing data sets to evaluate nine ESMs at site, biome, latitude, and global scales. Three variables—root (including fine and coarse roots), total vegetation carbon density, and the root:total vegetation carbon ratios (R/T ratios), were chosen for ESM evaluation. ESM models performed well in simulating the spatial distribution of carbon densities in root ( r = 0.71) and total vegetation ( r = 0.62). However, ESM models had significant biases in simulating absolute carbon densities in root and total vegetation biomass across the majority of land ecosystems, especially in tropical and arctic ecosystems. Particularly, ESMs significantly overestimated carbon density in root (183%) and total vegetation biomass (167%) in climate zones of 10°S–10°N. Substantial discrepancies between modeled and observed R/T ratios were found: the R/T ratios from ESMs were relatively constant, approximately 0.2 across all ecosystems, along latitudinal gradients, and in tropic, temperate, and arctic climatic zones, which was significantly different from the observed large variations in the R/T ratios (0.1–0.8). There were substantial inconsistencies between ESM‐derived carbon density in root and total vegetation biomass and the R/T ratio at multiple scales, indicating urgent needs for model improvements on carbon allocation algorithms and more intensive field campaigns targeting carbon density in all key vegetation components.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

The Impact of Model Resolution on the Southern Hemisphere in Community Climate System Model Version 4 Idealized Climate Simulations

Model resolution plays a large role in accurately simulating the Southern Hemisphere circulation in both the ocean and atmosphere. Resolving the mesoscale field is important as it has been shown to have a significant impact on the large-scale climate in eddy-rich regions, which are regions of large CO2 absorption. The presence of ocean and atmospheric mesoscale features can affect sea surface temperatures, the strength and location of storm tracks, and many other air-sea processes. Additionally, with an improvement in resolution, the eddy kinetic energy in the ocean can be expected to change considerably. The significance model resolution has on the Southern Hemisphere is examined using the Community Climate System Model, Version 4, eddy-parameterizing and eddy-resolving simulations. The CO2 concentrations and ozone levels are specified independently to better understand how the mesoscale field responds to extreme changes in external forcing and the resulting climate impacts. Overall, in the eddy-parameterizing simulations, the ozone forcing is found to be more important than the changes in CO2 concentrations. However, in the case of the eddy-resolving simulations, the CO2 concentrations are found to be more dominant, especially in eddy-rich regions. These results demonstrate the need for an increase in model resolution for climate prediction.

Daher, Houraa (ORCID:0000000200177346)↗
DOE OSTI2017

Virtual Observation System for Earth System Model: An Application to ACME Land Model Simulations

Investigating and evaluating physical-chemical-biological processes within an Earth system model (EMS) can be very challenging due to the complexity of both model design and software implementation. A virtual observation system (VOS) is presented to enable interactive observation of these processes during system simulation. Based on advance computing technologies, such as compiler-based software analysis, automatic code instrumentation, and high-performance data transport, the VOS provides run-time observation capability, in-situ data analytics for Earth system model simulation, model behavior adjustment opportunities through simulation steering. A VOS for a terrestrial land model simulation within the Accelerated Climate Modeling for Energy model is also presented to demonstrate the implementation details and system innovations.

58 GEOSCIENCES↗
DOE OSTI2018

Methodology Description for the Policy Analysis Modeling System (PAMS)

The Policy Analysis Modeling System is a spreadsheet tool developed to provide an estimate of costs and benefits of appliance efficiency standard and labeling programs. PAMS is a self-contained spreadsheet model that provides both a consumer-oriented analysis and a national cost-benefit analysis in the style of the analysis performed for U.S. appliance efficiency standards. The tool allows policy analysts from many countries to produce a first-cut analysis of appliance efficiency program costs and benefits, examine the sensitivities of the analysis with respect to different policy parameters and assumptions, and continually refine the analysis as more data becomes available. The methodology is a bottom-up approach, using technical specifications for particular products in estimating the increased cost to the consumer resulting from implementation of particular energy-saving designs. It is designed to operate for the widest possible variety of countries, and with as little need as possible for detailed input data. For more accurate results, it can be easily customized to use the most reliable country-specific data inputs. In addition to consumer financial impacts, the tool provides national primary energy savings and estimates of carbon emissions mitigation resulting from the program.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2017

Use of a Reduced Order Model (ROM) to Simulate SOFC Performance in System Models

Numerical models for design and optimization of fuel cell-based power generation systems require an accurate representation of the SOFC stack performance over a wide range of operating conditions. Response surface techniques were used with detailed SOFC stack model results to create a computationally efficient reduced order model (ROM) of the stack that retains desirable information about its internal state, which can be important in system optimization studies to preclude operation under off-design conditions that can adversely impact overall reliability. A tool was developed to randomly sample selected input parameters, obtain stack solutions for these sampled cases, perform regression to obtain response surfaces for stack performance and other metrics of interest, and export the response surfaces as a ROM. The ROM was then successfully implemented in an Aspen Plus® system model for a natural gas fuel cell (NGFC) power system. Additional work to characterize the ROM’s approximation error is ongoing.

Modeling & Simulation↗
NASA NTRSDate not supplied

New Developments In NASA’s Entry Systems Modeling Project

This paper describes recent developments for modeling entry, descent, and landing (EDL)of spacecraft in support of NASA’s exploration missions. Mission-specific research and model development for entry systems occurs across the Agency (e.g., within flight programs like Artemis/Orion and Mars Sample Return), however the aim of this paper is to discuss the research conducted by NASA’s Entry Systems Modeling (ESM) Project, which serves as the Agency’s only effort dedicated to advancing modeling capabilities that cross-cut multiple technical disciplines, missions and destinations. The ESM portfolio is developed to address the specific needs expressed by a cross-section of NASA stakeholders, including flight and research projects, technical leadership, and subject matter experts. Technology development in ESM is organized and prioritized from a system-level perspective, resulting in four broad technical areas of investment: (1) Thermal Protection System (TPS) material modeling, (2) Shock layer kinetics and radiation, (3) Aerosciences, and (4) Guidance, navigation, and control. In addition to the core technical areas, special topics are rolled into the project portfolio as specific demands arise. Current special topics include TPS Certification by Analysis, improving understanding of woven TPS material performance; Hypersonic Wake Flows, assessing and improving predictions of base flows; and the MEDLI2 Deep Dive, furthering analysis of data obtained during Mars2020 mission’s entry and descent at Mars. Key results from each of these areas are presented in this paper, along with associated references to serve as a roadmap for other EDL researchers to access NASA’s publications.

Aaron M Brandis↗
DOE OSTI2023

Network-Wide Traffic Signal Control Using Bilinear System Modeling and Adaptive Optimization

This study proposes a new multi-input multi-output optimal bilinear signal control method in which a bilinear dynamic model approximation is used to capture the nonlinear dynamics of the urban traffic networks. With signal green time splits as the control input and traffic delay changes as the output for each intersections in the network, a bilinear system model was developed, which, on the basis of linear system modeling, takes interactions among traffic delays and signal timing splits into consideration. Based on the bilinear system modeling framework, we conducted two steps in each time interval to derive traffic control strategies: (1) we used the normalized least-squared algorithm to estimate system parameters; and (2) we solved an online optimization problem to obtain the updated traffic control inputs for the signal timing that minimizes future traffic delays. We evaluated the proposed method in a microscopic traffic simulation environment (VISSIM) with a 35-intersection network of Bellevue city in Washington. Two different traffic demand patterns: (1) normal traffic demands; and (2) time-varying traffic demands were simulated to compare the performance of different control strategies. Experimental results show that (1) the proposed bilinear system model can better describe traffic system dynamics than linear-model based methods, such as our previously developed linear-quadratic regulator control; and (2) the proposed method outperforms the state-of-the-art signal control strategies, namely the max-pressure and the self-organizing traffic light control methods. We have also shown that the proposed method is applicable to all other possible network layouts and signal controller phasing structures.

42 ENGINEERING↗
DOE OSTI2022

Atmospheric river representation in the Energy Exascale Earth System Model (E3SM) version 1.0

Abstract. The Energy Exascale Earth System Model (E3SM) project is an ongoing, state-of-the-science Earth system modeling, simulation, and prediction project developed by the US Department of Energy (DOE). With an emphasis on supporting the DOE's energy mission, understanding and quantifying how well the model simulates water cycle processes is of particular importance. Here, we evaluate E3SM version 1.0 (v1.0) for its ability to represent atmospheric rivers (ARs), which play significant roles in water vapor transport and precipitation. The characteristics and precipitation associated with global ARs in E3SM at standard resolution (1∘ × 1∘) are compared to the Modern-Era Retrospective analysis for Research and Applications, version 2 (MERRA2). Global patterns of AR frequencies in E3SM show high degrees of correlation (≥0.97) with MERRA2 and low mean absolute errors (MAEs; <1 %) annually, seasonally, and across different ensemble members. However, some large-scale condition biases exist, leading to AR biases – most significant of which are the double intertropical convergence zone (ITCZ), a stronger and/or equatorward-shifted subtropical jet during boreal and austral winters, and enhanced Northern Hemisphere westerlies during summer. By comparing atmosphere-only and fully coupled simulations, we attribute the sources of the biases to the atmospheric component or to a coupling response. Using relationships revealed in Dong et al. (2021), we provide evidence showing the stronger North Pacific jet in winter and the enhanced Northern Hemisphere westerlies during summer, associated with E3SM's double ITCZ and related weaker Atlantic meridional overturning circulation (AMOC), respectively, which are significant sources of the AR biases found in the coupled simulations.

58 GEOSCIENCES↗
DOE OSTI2022

Nitrification, denitrification, and competition for soil N : Evaluation of two Earth System Models against observations

Abstract Earth System Models (ESMs) have implemented nitrogen (N) cycles to account for N limitation on terrestrial carbon uptake. However, representing inputs, losses, and recycling of N in ESMs is challenging. Here, we use global rates and ratios of key soil N fluxes, including nitrification, denitrification, mineralization, leaching, immobilization, and plant uptake (both NH 4 + and NO 3 − ), from the literature to evaluate the N cycles in the land model components of two ESMs. The two land models evaluated here, E3SM Land Model version 1 (ELMv1)‐ECA and CLM5.0, originated from a common model but have diverged in their representation of plant–microbe competition for soil N. The models predict similar global rates of gross primary productivity (GPP) but have approximately two‐fold to three‐fold differences in their underlying global mineralization, immobilization, plant N uptake, nitrification, and denitrification fluxes. Both models dramatically underestimate the immobilization of NO 3 − by soil bacteria compared with literature values and predict dominance of plant uptake by a single form of mineral nitrogen (NO 3 − for ELM, with regional exceptions, and NH 4 + for CLM5.0). CLM5.0 strongly underestimates the global ratio of gross nitrification:gross mineralization and both models are likely to substantially underestimate the ratio of nitrification:denitrification. Few experimental data exist to evaluate this last ratio, in part because nitrification and denitrification are quantified using different techniques and because denitrification fluxes are difficult to measure at all. More observational constraints on soil nitrogen fluxes such as nitrification and denitrification, as well as greater scrutiny of the functional impact of introducing separate NH 4 + and NO 3 − pools into ESMs, could help to improve confidence in present and future simulations of N limitation on the carbon cycle.

Nevison, Cynthia↗
DOE OSTI2019

Climate Forcing and Trends of Organic Aerosols in the Community Earth System Model (CESM2)

The Community Earth System Model version 2 (CESM2) includes three main atmospheric configurations: the Community Atmosphere Model version 6 (CAM6) with simplified chemistry and a simplified organic aerosol (OA) scheme, CAM6 with comprehensive tropospheric and stratospheric chemistry representation (CAM6-chem), and the Whole Atmosphere Community Climate Model version 6 (WACCM6). Both, CAM6-chem and WACCM6 include a more comprehensive secondary organic aerosols (SOA) approach using the volatility basis set (vbs) scheme and prognostic stratospheric aerosols. This paper describes the different OA schemes available in the different atmospheric configurations of CESM2 and discusses differences in aerosol burden and resulting climate forcings. Derived OA burden and trends differ due to differences in OA formation using the different approaches. Regional differences in Aerosol Optical Depth with larger values using the comprehensive approach occur over SOA source regions. Stronger increasing SOA trends between 1960 and 2015 in WACCM6 compared to CAM6 are due to increasing biogenic emissions aligned with increasing surface temperatures. Using the comprehensive SOA approach further leads to improved comparisons to aircraft observations and SOA formation of ˜143 Tg/yr. We further use WACCM6 to identify source contributions of OA from biogenic, fossil fuel, and biomass burning emissions, to quantify SOA amounts and trends from these sources. Increasing SOA trends between 1960 and 2015 are the result of increasing biogenic emissions aligned with increasing surface temperatures. Biogenic emissions are at least two thirds of the total SOA burden. In addition, SOA source contributions from fossil fuel emissions become more important, with largest values over Southeast Asia. The estimated total anthropogenic forcing of OA in WACCM6 for 1995–2010 conditions is -0.43 W/m2, mostly from the aerosol direct effect.

Tilmes, S↗
NASA NTRS2006

Development and Validation of a Pressurization System Model for a Crossfeed Subscale Water Test Article

A pressurization system model was developed for a crossfeed subscale water test article using the EASY5 modeling software. The model consisted of an integrated tank pressurization and pressurization line model. The tank model was developed using the general purpose library, while the line model was assembled from the gas dynamic library. The pressurization system model was correlated to water test data obtained from nine test runs conducted on the crossfeed subscale test article. The model was first correlated to a representative test run and frozen. The correlated model was then used to predict the tank pressures and compared with the test data for eight other runs. The model prediction showed excellent agreement with the test data, allowing it to be used in a later study to analyze the pressurization system performance of a full-scale bimese vehicle with cryogenic propellants.

Nguyen, Han↗
NASA NTRSDate not supplied

Evaluating Lunar Water Processing System Model Configurations for Small Scale Oxygen and Hydrogen Production Within JAXA'S ISRU Technology

Introduction: In-Situ Resource Utilization (ISRU) refers to novel methods of extracting and processing local resources for use in life support and propulsion systems, reducing or eliminating the required consumables to be transferred from Earth. Current estimates of water-ice availability embedded in regolith within the Moon’s permanently shadowed regions (PSR’s) range between 1-5% by weight. However, the composition and characteristics of the “wet” regolith is unknown. Alternate ISRU excavation techniques and Concept of Operations (ConOps) must be explored to optimize surface system operations based on these factors. To assess the feasibility of different ISRU subsystem technologies and compare system architecture configurations, an interchangeable system model was generated to incorporate technologies spanning excavation of raw materials to storage of products and determine optimal arrangement of total system processing needs. Total Mass, Volume, and Power (M/V/P) requirements were computed for 168 design iterations of this water processing plant. System Model: In FY24, the System Engineering and Integration (SE&I) ISRU Modeling and Analysis (SIMA) team developed a lunar water processing system model using the Mission Analysis and Integration Tool (MAIT) to estimate the M/V/P for ISRU subsystems operating under a wide range of Hydrogen (H2) and Oxygen (O2) production targets for the Space Technology Mission Directorate (STMD) [1]. Based on Japan Aerospace Exploration Agency’s (JAXA) surface operational requirements, this system architecture was modified to include the ability to excavate consolidated icy regolith (versus granular ice excavation using Kennedy Space Center’s (KSC) ISRU Pilot Excavator, IPEx) and explore the feasibility of processing the lunar water both inside and outside of the PSR. For the consolidated icy regolith case study, excavation was performed via a mobility transport chassis outfitted with The Regolith Ice Drill for Exploring New Terrain (TRIDENT) for drilling [2] and the Cold Operable Lunar Deployable Arm (COLDArm) [3] for regolith transfer. The system model determines the required rover and payload. M/V/P to handle the required regolith processing rates. The regolith is then sorted and heated to sublimate the ice (via an auger dryer). The exiting high temperature, low pressure vapor is cleaned of volatiles (via cold trap) and electrolyzed to produce H2 and O2. These products are then dried, liquified with 20 K and 90 K cryocoolers (for H2 and O2, respectively), and stored in cylindrical tanks. Study Goals: Due to the different ConOps options of regolith transport to the ridge for processing versus processing it directly inside the PSR, as well as the unknown regolith/water-ice composition, new excavation techniques and their power configurations are being evaluated within a ISRU system architecture for production targets less than NASA’s pilot plant (1 mT). This analysis investigates the feasibility of numerous excavation techniques, power architectures, and logistical operations and determines an optimal system configuration with regards to M/V/P. It aims to investigate which parameters, both locally and globally, have the greatest effect on each subsystem within the plant. This can be used to identify the most critical components of the plant, and guide future decisions on allocating funding for research and development. The results from this study may provide subsystem developers with appropriate interfaces with excavation subsystems and downstream processes, and assessing the overall feasibility of each excavation technique, power architecture, and logistical timeframe. References: [1] Carlson, A. et. al. (2024) ICES. [2] Zacny, K., et. al. (2024) “ASCE Earth and Space”. [3] McCormick, R., et. Al. (2024) IEEE Xplore.

ISRU↗
DOE OSTI2019

Novel Technique for Developing Linearized Convex System Models from Experimentally Derived Data: Preprint

This paper presents a novel technique for generating a convex system model from an experimentally derived data set which features variance among repeated measurements. The convex system model developed as a test case characterizes the dynamic system losses of a vanadium redox low battery as a function of the active power output and the battery state of charge.

24 POWER TRANSMISSION AND DISTRIBUTION↗