Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “STYRENE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Kinetics of scrap tyre pyrolysis under vacuum conditions

Scrap tyre pyrolysis under vacuum is attractive because it allows easier product condensation and control of composition (gas, liquid and solid). With the aim of determining the effect of vacuum on the pyrolysis kinetics, a study has been carried out in thermobalance. Two data analysis methods have been used in the kinetic study: (i) the treatment of experimental data of weight loss and (ii) the deconvolution of DTG (differential thermogravimetry) curve. The former allows for distinguishing the pyrolysis of the three main components (volatile components, natural rubber and styrene-butadiene rubber) according to three successive steps. The latter method identifies the kinetics for the pyrolysis of individual components by means of DTG curve deconvolution. The effect of vacuum in the process is significant. The values of activation energy for the pyrolysis of individual components of easier devolatilization (volatiles and NR) are lower for pyrolysis under vacuum with a reduction of 12 K in the reaction starting temperature. The kinetic constant at 503 K for devolatilization of volatile additives at 0.25 atm is 1.7 times higher than that at 1 atm, and that corresponding to styrene-butadiene rubber at 723 K is 2.8 times higher. Vacuum enhances the volatilization and internal diffusion of products in the pyrolysis process, which contributes to attenuating the secondary reactions of the repolymerization and carbonization of these products on the surface of the char (carbon black). The higher quality of carbon black is interesting for process viability. The large-scale implementation of this process in continuous mode requires a comparison to be made between the economic advantages of using a vacuum and the energy costs, which will be lower when the technologies used for pyrolysis require a lower ratio between reactor volume and scrap tyre flow rate.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Antimony leaching in plastics from waste electrical and electronic equipment (WEEE) with various acids and gamma irradiation

Highlights: • We have proposed a method to recover antimony from electronic plastics. • The most efficient acid solution was sodium hydrogen tartrate in dimethyl sulfoxide. • Gamma irradiation did not influence the antimony leaching ability. - Abstract: There has been a recent interest in antimony since the availability in readily mined areas is decreasing compared to the amounts used. It is important in many applications such as flame retardants and in the production of polyester, which can trigger an investigation of the leachability of antimony from plastics using different acids. In this paper, different types of acids are tested for their ability to leach antimony from a discarded computer housing, made of poly(acrylonitrile butadiene styrene), which is a common plastic type used in electrical and electronic equipment. The acid solutions included sodium hydrogen tartrate (0.5 M) dissolved in either dimethyl sulfoxide or water (at ca. 23 °C and heated to ca. 105 °C). The metal content after leaching was determined by inductively coupled plasma optical emission spectroscopy. The most efficient leaching medium was the heated solution of sodium hydrogen tartrate in dimethyl sulfoxide, which leached almost half of the antimony from the poly(acrylonitrile butadiene styrene). Gamma irradiation, which is proposed to improve the mechanical properties in plastics, was used here to investigate the influence of antimony leaching ability. No significant change in the amount of leached antimony could be observed.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Laboratory simulations of the mixed solvent extraction recovery of dominate polymers in electronic waste

Highlights: • Mixed plastics in e-waste are separated with a solvent extraction method. • Recovery procedure obtained an acceptable recovery rate with high purity. • The recovered plastics are greatly energy-saving compared with virgin polymers. • Cost-saving can be potentially achieved for specific composition of plastics. - Abstract: The recovery of four dominant plastics from electronic waste (e-waste) using mixed solvent extraction was studied. The target plastics included polycarbonate (PC), polystyrene (PS), acrylonitrile butadiene styrene (ABS), and styrene acrylonitrile (SAN). The extraction procedure for multi-polymers at room temperature yielded PC, PS, ABS, and SAN in acceptable recovery rates (64%, 86%, 127%, and 143%, respectively, where recovery rate is defined as the mass ratio of the recovered plastic to the added standard polymer). Fourier transform infrared spectroscopy (FTIR) was used to verify the recovered plastics’ purity using a similarity analysis. The similarities ranged from 0.98 to 0.99. Another similar process, which was denoted as an alternative method for plastic recovery, was examined as well. Nonetheless, the FTIR results showed degradation may occur over time. Additionally, the recovery cost estimation model of our method was established. The recovery cost estimation indicated that a certain range of proportion of plastics in e-waste, especially with a higher proportion of PC and PS, can achieve a lower cost than virgin polymer product. It also reduced 99.6%, 30.7% and 75.8% of energy consumptions and CO{sub 2} emissions during the recovery of PC, PS and ABS, and reduced the amount of plastic waste disposal via landfill or incineration and associated environmental impacts.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Plastic waste to liquid oil through catalytic pyrolysis using natural and synthetic zeolite catalysts

Highlights: • Liquid fuel was produced from plastic waste through catalytic pyrolysis. • Pyrolysis of polystyrene plastic produced highest liquid oil yield of 54% using natural zeolite. • Pyrolysis liquid oil mainly consisted of aromatic hydrocarbons with a few aliphatic compounds. • Primary compounds in liquid oil were styrene, ethylbenzene, benzene, azulene, and naphthalene. • Liquid oil had high heating values (HHV) of 40.2–45 MJ/kg. - Abstract: This study aims to examine the catalytic pyrolysis of various plastic wastes in the presence of natural and synthetic zeolite catalysts. A small pilot scale reactor was commissioned to carry out the catalytic pyrolysis of polystyrene (PS), polypropylene (PP), polyethylene (PE) and their mixtures in different ratios at 450 °C and 75 min. PS plastic waste resulted in the highest liquid oil yield of 54% using natural zeolite and 50% using synthetic zeolite catalysts. Mixing of PS with other plastic wastes lowered the liquid oil yield whereas all mixtures of PP and PE resulted in higher liquid oil yield than the individual plastic feedstocks using both catalysts. The GC–MS analysis revealed that the pyrolysis liquid oils from all samples mainly consisted of aromatic hydrocarbons with a few aliphatic hydrocarbon compounds. The types and amounts of different compounds present in liquid oils vary with some common compounds such as styrene, ethylbenzene, benzene, azulene, naphthalene, and toluene. The FT-IR data also confirmed that liquid oil contained mostly aromatic compounds with some alkanes, alkenes and small amounts of phenol group. The produced liquid oils have high heating values (HHV) of 40.2–45 MJ/kg, which are similar to conventional diesel. The liquid oil has potential to be used as an alternative source of energy or fuel production.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cavitation-Induced Stiffness Reductions in Quantum Dot–Polymer Nanocomposites

The elastic stiffness of two polymer nanocomposite systems is investigated. The nanoscale fillers comprise cadmium selenide (CdSe, ~4 nm) and cadmium selenide/cadmium sulfide (CdSe/CdS, ~13 nm) quantum dots (QDs). The QDs are embedded within an electrospun structural block copolymer, poly(styrene-ethylene-butylene-styrene) (SEBS). Tensile testing shows a monotonic decrease in the tensile Young's modulus with increasing partially phase-separated QD concentration; this is to be compared to corresponding nanocomposites reinforced with nanorod (NR) and tetrapod (TP)-SEBS nanocomposites which show a monotonic increase with particle loading. While most studies to date emphasize the increase in Young's modulus in polymer nanocomposites at higher reinforcement loadings, few focus on the tunability of the modulus from reductions in stiffness. The present work reveals up to an ~80% reduction in tensile Young's modulus with the addition of 5 vol % of QDs to electrospun SEBS. In this study, we sought mechanistic insight into this reduction in composite stiffness using a 2D lattice spring model. Simulation results reveal that the stiffness decrease with the addition of QD reinforcements is likely due to cavitation in the polymer in the vicinity of the QD aggregates arising from polymer debonding under tension. We anticipate that this study, performed with a commonly used structural rubber, may find use in designing polymer-matrix nanocomposite fibers with specific Young's moduli for applications requiring a tunable lower stiffness material.

36 MATERIALS SCIENCE↗

Compatibility Assessment of Fuel System Elastomers with Bio-oil and Diesel Fuel

Bio-oil derived via fast pyrolysis is being developed as a renewable fuel option for petroleum distillates. The compatibility of neat bio-oil with six elastomer types was evaluated against the elastomer performance in neat diesel fuel, which served as the baseline. The elastomers included two fluorocarbons, six acrylonitrile butadiene rubbers (NBRs), and one type each of fluorosilicone, silicone, styrene butadiene rubber (SBR), polyurethane, and neoprene. Specimens of each material were exposed to the liquid and gaseous phases of the test fuels for 4 weeks at 60 degrees C, and properties in the wetted and dried states were measured. Exposure to bio-oil produced significant volume expansion in the fluorocarbons, NBRs, and fluorosilicone; however, excessive swelling (over 80%) was only observed for the two fluorocarbons and two NBR grades. The polyurethane specimens were completely degraded by the bio-oil. In contrast, both silicone and SBR exhibited lower swelling levels in bio-oil compared to neat diesel fuel. The implication is that, while polyurethane and fluorocarbon may not be acceptable seal materials for bio-oils, silicone may offer a lower cost alternative.

09 BIOMASS FUELS↗

Ultrathin and Conformal Initiated Chemical-Vapor-Deposited Layers of Systematically Varied Surface Energy for Controlling the Directed Self-Assembly of Block CoPolymers

Directed self-assembly (DSA) of block copolymer (BCP) thin films is a promising approach to enable next-generation patterning at increasingly smaller length scales. DSA utilizes interfacial wetting layers to force the BCP domains to self-assemble with the desired orientation with respect to the substrate. Here, we demonstrate that initiated chemical-vapor-deposited (iCVD) polydivinylbenzene (pDVB) ultrathin films can direct the self-assembly of poly(styrene-block-methylmethacrylate). Here, we found that the methyl radicals formed at increased filament temperatures during the iCVD process result in the backbone methylation of pDVB. By tuning the degree of backbone methylation, we systematically changed the wetting properties of the iCVD pDVB from a slight poly(methylmethacrylate) preference to complete poly(styrene) preference. Additionally, we utilize the conformal nature of the iCVD to form a wetting layer over a topographical line and space pattern, which is subsequently used to produce self-assembled BCP films with both perpendicular orientation and long-range alignment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Proton Conducting Sulfonated Poly(Ionic Liquid) Block Copolymers

Herein, we report the synthesis of proton-conducting sulfonated poly(ionic liquid) block copolymers (S-PILBCPs) containing one block with sulfonic acid (sulfonated styrene, SS) and the other with an IL moiety (vinylbenzylmethylimidazolium bis(trifluoromethylsulfonyl)imide, VBMIm-TFSI) using reversible addition–fragmentation chain-transfer (RAFT) polymerization and post-polymerization modifications (i.e., functionalization, anion exchange reactions, and sulfonation). The S-PILBCPs uniquely conjoin the SS block with mobile protons (H + ) and the PIL block with mobile anions (TFSI – ), where multiple highly desired properties, including high proton conductivity (from the SS block), and high IL-philicity and oxygen solubility (from the PIL block) can exist compartmentally within a microphase separated morphology (evidenced by differential scanning calorimetry (DSC) and small-angle X-ray scattering (SAXS)). High ion conductivity of 79.7 mS/cm at a PIL block composition of 21.6 mol % was observed at 80 °C and 90% relative humidity (RH) (comparable to the benchmark Nafion ionomer). This work successfully demonstrates the design of S-PILBCPs as a new material platform and showcases its promise as an ionomer for proton exchange membrane fuel cells (PEMFCs) as they simultaneously and compartmentally combine proton conductivity and oxygen solubility. Furthermore, these benefits have recently been leveraged to achieve substantial improvement in oxygen reduction reaction (ORR) activity and subsequently fuel cell performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

SAN-Based Block Polymers as a Platform for Manufacturing Strong Isoporous Membranes

Ultrafiltration (UF) membranes are ubiquitous in water purification and bioprocessing. However, co-designing their mechanical and transport properties remains challenging because of the broad pore size distributions at the surface and within the bulk that result from nonsolvent-induced phase separation (NIPS) – their typical manufacturing process. These distributions influence the hydrodynamic resistance to water flow and the stress concentrations around the pores. Developing advanced UF membranes requires innovative molecular designs that offer control over the surface and bulk pores, as well as the mechanical properties of the load-bearing, polymer. Here, we introduce a platform for designing UF membranes by leveraging solution self-assembly of block polymers and chain architectures with pendant polar groups. The block polymers consist of a poly(styrene-co-acrylonitrile) hydrophobic block, which is known for its strength, and a poly(4-vinyl pyridine) hydrophilic block, which drives solution self-assembly. We focus on a series of block polymers with constant molecular weight, M n ≈ 115 kDa, SAN fraction, 75 wt.%, and varying acrylonitrile content, 0 to 40 mol%, to demonstrate that: (i) RAFT dispersion copolymerization of acrylonitrile and styrene provides a facile route to synthesize strong block polymers, (ii) incorporation of acrylonitrile into the hydrophobic block enhances membrane strength by facilitating chain entanglements and dipole-dipole interactions, and (iii) acrylonitrile alters the balance between membrane permeance and rejection, even when the membranes feature similar surface and bulk pores. Overall, our results provide insights into the molecular design of UF membranes with enhanced mechanical and separation properties, contributing to the development of materials for water and energy technologies.

deformation↗

A Reactive Platform Approach for the Rapid Synthesis and Discovery of High $χ$/Low N Block Polymers

We report a reactive polymer platform for the rapid discovery of strongly segregated diblock polymers that microphase separate into well-defined morphologies with sub-5 nm features. Our strategy employs reactive poly(styrene- block -2-vinyl-4,4-dimethylazlactone) (SV) polymers with low degrees of polymerization ( N ), in which the V blocks undergo selective and quantitative reactions with functional primary amines, to identify new poly(acrylamides) that are highly immiscible with poly(styrene) and induce block polymer self-assembly. Using a combination of optical birefringence and small-angle X-ray scattering (SAXS), we characterize a library of 17 block polymers produced by amine functionalization of four parent SV diblocks synthesized by sequential RAFT polymerizations. Further, we demonstrate that V block functionalization with hydroxy- and methoxy-functional amines yields diblocks that order into lamellar mesophases with half-pitches as small as 3.8 nm. Thus, this azlactone-based reactive molecular platform enables combinatorial generation of polymer libraries with diverse side chain structures that may be rapidly screened to identify new high $χ$/low N systems for self-assembly at ever decreasing length scales.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Comparison of Gel Relaxation Times and End-Block Pullout Times in ABA Triblock Copolymer Networks

The gel relaxation times of two different poly[styrene-$b$-(ethylene-alt-propylene)-$b$-styrene] (SEPS) ABA triblock copolymers in squalane at various concentrations has been measured by rheology. These relaxation times were compared with the results of previous time-resolved small-angle neutron scattering (TR-SANS) experiments, which measured chain exchange kinetics in SEP diblock and SEPS triblock micelles in squalane. We report the gels relaxed up to four orders of magnitude faster than expected based on the chain exchange measurements of equivalent diblock polymers. By accounting for two factors—a bias toward shorter end-block lengths in the gel relaxation, and a reduction in the energy barrier to chain pullout caused by the triblock architecture—a model is constructed that reconciles the surprisingly short gel relaxation times with the chain exchange times measured via TR-SANS.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of Miscibility on Poly(ethylene oxide) Crystallization from Disordered Melts of Block Copolymers with Lithium and Magnesium Counterions

Crystallization within block copolymers is a subject of considerable interest; however, little is understood about how the presence of an ion-containing block, such as poly[(styrene-4-sulfonyltrifluoromethylsulfonyl)imide (P[(STFSI)]), influences the crystallization behavior of single-ion conducting block copolymers derived from poly(ethylene oxide)-b-poly[(styrene-4-sulfonyltrifluoromethylsulfonyl)imide (PEO-P[(STFSI)]). In this study, we report on the crystallization behavior of PEO in a matched-set library of lithiated (PEO-P[(STFSI)Li]) and magnesiated (PEO-P[(STFSI) 2 Mg]) single-ion conducting block copolymers that are disordered in the melt. Structural and thermal analysis of semicrystalline samples prepared by quenching amorphous melts reveals that total PEO crystallinity is independent of cation identity. Furthermore, crystallization induces the formation of lamellar nanostructures regardless of the counterion present. However, the quality of the PEO crystallites and concomitant nanostructures appears to be strongly influenced by counterion identity; magnesiated samples demonstrate more disorder at both the crystalline and nanostructural level. By monitoring PEO crystallization with in situ small and wide-angle X-ray scattering, we show that PEO crystallizes from a homogeneous melt within PEO-P[(STFSI)Li] but is hindered by the presence of disordered concentration fluctuations within the magnesiated samples. Thus, counterion identity influences PEO crystallization by controlling the miscibility of the polymer blocks within the crystallizing melt.

36 MATERIALS SCIENCE↗

Interpreting Neutron Reflectivity Profiles of Diblock Copolymer Nanocomposite Thin Films Using Hybrid Particle-Field Simulations

Mixtures of block copolymers and nanoparticles (block copolymer nanocomposites) are known to microphase separate into a plethora of microstructures, depending on the composition, length scale and nature of interactions among its different constituents. Theoretical and experimental works on this class of nanocomposites have already high-lighted intricate relations among chemical details of the polymers, nanoparticles, and various microstructures. Confining these nanocomposites in thin films yields an even larger array of structures, which are not normally observed in the bulk. In contrast to the bulk, exploring various microstructures in thin films by the experimental route remains a challenging task. Here in this work, we construct a model for the thin films of lamellar forming diblock copolymers containing spherical nanoparticles based on a hybrid particle-field approach. The model is benchmarked by comparison with the depth profiles obtained from the neutron reflectivity experiments for symmetric poly(deuterated styrene-b-n butyl methacrylate) copolymers blended with spherical magnetite nanoparticles covered with hydrogenated poly(styrene) corona. We show that the model based on a hybrid particle-field approach provides details of the underlying microphase separation in the presence of the nanoparticles through a direct comparison to the neutron reflectivity data. This work benchmarks the application of the hybrid particle-field model to extract the interaction parameters for exploring different microstructures in thin films containing block copolymers and nanocomposites.

36 MATERIALS SCIENCE↗

Microphase-Separated Morphologies and Molecular Network Topologies in Multiblock Copolymer Gels

Strong physical gels derived from thermoplastic elastomeric ABA triblock copolymers solvated with a midblock-selective oil continue to find use in increasingly diverse applications requiring highly elastic and mechanically robust soft materials with tunable properties. Here, in this study, we first investigate the morphological characteristics of thermoplastic elastomer gels (TPEGs) derived from a homologous series of linear A(BA) n multiblock copolymers composed of styrene and hydrogenated isoprene repeat units and possessing comparable molecular weight but varying in the number of B-blocks: 1 (triblock), 2 (pentablock), and 3 (heptablock). Small-angle X-ray scattering performed at ambient temperature confirms that (i) increasing hydrogenation reduces the microdomain periodicity of the neat copolymers and (ii) increasing the oil concentration of the TPEGs tends to swell the nanostructure (increasing the periodicity), but concurrently decreases the size of the styrenic micelles, to different extents depending on the molecular architecture. Complementary dissipative particle dynamics simulations reveal the level to which midblock bridging, which is primarily responsible for the elasticity in this class of materials, is influenced by both oil concentration and molecular architecture. Since constrained topological complexity increases with increasing block number, we introduce a midblock conformation index that facilitates systematic classification of the different topologies involved in nearest-micelle bridge formation. Lastly, those possessing at least one bridged and one looped midblock with no dangling ends are found to be the most predominant topologies in the pentablock and heptablock networks.

36 MATERIALS SCIENCE↗

A Change in C–H Activation Mechanism: Experimental and Computational Investigations of Rh-Catalyzed Disubstituted Benzene Functionalization

We report the ethenylation of 1,3- and 1,2-disubstituted benzenes using [(η 2 -C 2 H 4 ) 2 Rh(μ-OAc)] 2 as a catalyst precursor and Cu(OPiv) 2 as the oxidant. The regioselectivity of alkenylation for 1,3-disubstituted benzenes produces 3,5-disubstituted styrene products, while the alkenylation of 1,2-disubstituted benzenes produces 3,4- disubstituted styrene products. The rate of alkenylation is influenced by steric and electronic factors based on the substituents of the benzene unit. In all cases, 1,2-disubstituted benzenes react faster than 1,3-disubstituted benzenes, with a rate difference that is from 2 times up to >70 times more rapid for 1,2-disubstituted substrates. This is likely due to the difference in the number of accessible C−H bonds based on the steric protection of C−H bonds adjacent to functionality. Furthermore, the rate of alkenylation is influenced by the arene substituent electronics. The rates of alkenylation for 1,2-disubstituted benzenes follow the trend OMe > Me > CF 3 > Cl, while for 1,3-disubstituted benzenes the trend is CF 3 > Cl > Me > OMe. Using quantum mechanics DFT calculations, we found that the C−H activation step can occur by two different mechanisms. The electronic properties of substituents on the arene ring change the preferred C−H bond-breaking mechanism for 1,2-disubstituted and 1,3-disubstituted benzenes.

Aromatic compounds↗

Rhodium-Catalyzed Arene Alkenylation Using Benzoquinone Derivatives as Oxidants

The Rh-catalyzed conversion of olefins and arenes to alkenyl arenes using [(η 2 -C 2 H 4 ) 2 Rh(μ-OPiv)] 2 as the catalyst precursor and 12 ortho- and para-substituted benzoquinone derivatives as the in situ oxidant is reported. Included are comparative studies of the quinone derivatives for (1) rate of styrene production from benzene and ethylene, (2) Markovnikov to anti-Markovnikov selectivity for reactions of benzene and propylene, and (3) ortho/meta/para selectivity when using tert-butylbenzene as the arene. Cyclic voltammetry was utilized to measure reduction potentials for each quinone to determine any possible influence of the quinone redox potential on arene alkenylation rate and selectivity. While significant differences in selectivity are observed between ortho -quinone derivatives, such differences are minimal when para-substituted quinones are utilized. These results suggest that ortho -benzoquinone derivatives likely serve as bidentate ligands, which explains the stronger influence on catalyst activity of ortho -benzoquinone identity compared to para -benzoquinones. Although ortho -benzoquinones generally give styrene production rates faster than those of para -benzoquinones, 3,5-di- tert -butyl- ortho -benzoquinone and ortho -chloranil react with ethylene to form bicyclo[2.2.2]oct-5-ene-2,3-dione derivatives as a significant side product.

aromatic compounds↗

Distinctive Stereochemically Linked Cooperative Effects in Bimetallic Titanium Olefin Polymerization Catalysts

The complex (μ-Me 2 C-3,3'){(η 5 -cyclopentadienyl)[1-Me 2 Si-( t BuN)](TiMe 2 )} 2 (3) was prepared as a new binuclear catalyst motif for homogeneous olefin polymerization. Complex 3 exists as rac-3 and meso-3 diastereomers, which can be separated and characterized by solution NMR spectroscopy and single-crystal X-ray diffraction. While meso-3 has high thermal stability, rac-3 undergoes thermolysis in solution to quantitatively form the dimeric methylidene complex (μ-Me 2 C-3,3'){(η 5 -cyclopentadienyl)[1-Me 2 Si( t BuN)][(μ-CH 2 )Ti]}2 (rac-4). Activation of rac-3 and meso-3 with 1 equiv of Ph 3 C + B(C 6 F 5 ) 4 – yields [(μ-CMe 2 -3,3'){(η 5 -cyclopentadienyl)[1-Me 2 Si( t BuN)]} 2 (μ-CH 2 )(μ-CH 3 )Ti 2 ] + B(C 6 F 5 ) 4 – (5; rac-5 and meso-5, respectively). Interestingly, meso-5 is stable in the presence of an additional 1 equiv of Ph 3 C + B(C 6 F 5 ) 4 –, while rac-5 reacts to yield rac-[(μ-CMe2-3,3'){(η5-cyclopentadienyl)[1-Me2Si(tBuN)]}2(μ-CH2)[(TiCH3)(Ti-η1-Ph3C)]2+[B(C6F5)4–]2 (rac-6) as indicated by multinuclear NMR spectroscopy and DFT computation. meso-3 reacts with 2 equiv of B(C 6 F 5 ) 3 to yield meso-[(μ-CMe 2 -3,3'){(η 5 -cyclopentadienyl)[1-Me 2 Si( t BuN)]} 2 (μ-CH 2 )(μ-CH 3 )Ti 2 ]+MeB(C 6 F 5 ) 3 – (meso-7) containing the same meso-5 cation but with a MeB(C 6 F 5 ) 3 –counteranion. These findings, along with catalytic results, indicate that rac-3 and meso-3 remain structurally intact during polymerization, consistent with the observed diastereoselectivity effects. Under identical ethylene/1-octene copolymerization conditions, only activated bimetallic rac-3 produces appreciable polymer, with meso-3 exhibiting low activity, but both yield polymer with a branch density >2× that of the monometallic control [(3- t Bu-C 5 H 3 )SiMe 2 N t Bu]TiMe 2 (Ti 1 ). In ethylene/styrene copolymerizations, rac-3 produces polymers with 3.1× higher M n and 2.1× greater styrene incorporation versus Ti 1 , while meso-3 catalyzes only ethylene-free styrene homopolymerization. In 1-octene homopolymerizations, meso-3 + B(C 6 F 5 ) 3 (i.e., meso-7) produces highly isotactic poly-1-octene (mmmm 91.7%), while rac-3 + Ph 3 C + B(C 6 F 5 ) 4 – (i.e., rac-5), rac-3 + B(C 6 F 5 ) 3 (i.e., rac-7), and meso-3 + Ph 3 C + B(C 6 F 5 ) 4 – (i.e., meso-5) produce only atactic poly-1-octene. In conclusion, these bimetallic polymerization catalysts exhibit distinctive cooperative effects influencing product M n , tacticity, and comonomer selection, demonstrating that binuclear catalyst stereochemical factors are significant.

36 MATERIALS SCIENCE↗