Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “STARTING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Carbonated hydroxyapatite starting from calcite and different orthophosphates under moderate hydrothermal conditions: Synthesis and surface reactivity in simulated body fluid

Highlights: • Carbonated apatite (CAP) could be easily obtained from CaCO{sub 3} and orthophosphates. • Highest CaCO{sub 3} dissolution and apatitic carbonate content were obtained with H{sub 3}PO{sub 4}. • A-B-type CAP was formed. • The synthesized CAP was thermally stable up to 1000 °C. • This CAP showed high biomineralization activity before and after thermal treatment. - Abstract: The one-step synthesis of carbonated hydroxyapatite (CAP) using calcite and different orthophosphates was investigated in a closed batch reactor. Only orthophosphoric acid could lead to the complete decomposition of calcite particles, when the reaction temperature was set at 80 °C. On the other hand, the reaction time and the dilution of the initial calcite suspension had no significant influence on the formation of the solid products. CAP was formed as the main crystalline calcium phosphate with the carbonate content in the range of 4.2–4.6 wt.%. The thermal decarbonation of the synthesized CAP started at 750 °C but it was only significant at 1000 °C under air atmosphere. This thermal decarbonation was total at 1200 °C or above. All CAP samples and products following thermal treatments were found bioactive in the test using simulated body fluid (SBF) solution.

36 MATERIALS SCIENCE↗

Reactive flash sintering of the complex oxide Li 0.5 La 0.5 TiO 3 starting from an amorphous precursor powder

We report the transformation of an amorphous mixture of Li 0.5 La 0.5 TiO 3 (LLTO) directly into a single phase dense polycrystal, all within a few seconds at about 800°C by the flash method. The starting material is a chemically-prepared precursor powder that experiences concurrent crystallization and densification to cubic LLTO during the flash event, as shown by in-situ X-ray measurements. The experiments were conducted at a constant heating rate with fields from 80 to 120 V cm –1 and a current limit of 60 mA mm –2 . Here, the resulting polycrystal yielded a bulk conductivity of 0.5 mS cm –1 .

36 MATERIALS SCIENCE↗

Single-phase and two-phase anaerobic digestion of fruit and vegetable waste: Comparison of start-up, reactor stability and process performance

Highlights: • Single-phase and two-phase systems were compared for fruit and vegetable waste digestion. • Single-phase digestion produced a methane yield of 0.45 m{sup 3} CH{sub 4}/kg VS and 83% VS removal. • Substrate solubilization was high in acidification conditions at 7.0 kg VS/m{sup 3} d and pH 5.5–6.2. • Energy yield was lower by 33% for two-phase system compared to the single-phase system. • Simple and straight-forward operation favored single phase process over two-phase process. - Abstract: Single-phase and two-phase digestion of fruit and vegetable waste were studied to compare reactor start-up, reactor stability and performance (methane yield, volatile solids reduction and energy yield). The single-phase reactor (SPR) was a conventional reactor operated at a low loading rate (maximum of 3.5 kg VS/m{sup 3} d), while the two-phase system consisted of an acidification reactor (TPAR) and a methanogenic reactor (TPMR). The TPAR was inoculated with methanogenic sludge similar to the SPR, but was operated with step-wise increase in the loading rate and with total recirculation of reactor solids to convert it into acidification sludge. Before each feeding, part of the sludge from TPAR was centrifuged, the centrifuge liquid (solubilized products) was fed to the TPMR and centrifuged solids were recycled back to the reactor. Single-phase digestion produced a methane yield of 0.45 m{sup 3} CH{sub 4}/kg VS fed and VS removal of 83%. The TPAR shifted to acidification mode at an OLR of 10.0 kg VS/m{sup 3} d and then achieved stable performance at 7.0 kg VS/m{sup 3} d and pH 5.5–6.2, with very high substrate solubilization rate and a methane yield of 0.30 m{sup 3} CH{sub 4}/kg COD fed. The two-phase process was capable of high VS reduction, but material and energy balance showed that the single-phase process was superior in terms of volumetric methane production and energy yield by 33%. The lower energy yield of the two-phase system was due to the loss of energy during hydrolysis in the TPAR and the deficit in methane production in the TPMR attributed to COD loss due to biomass synthesis and adsorption of hard COD onto the flocs. These results including the complicated operational procedure of the two-phase process and the economic factors suggested that the single-phase process could be the preferred system for FVW.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Organic Chemical Attribution Signatures for the Sourcing of a Mustard Agent and Its Starting Materials

Chemical attribution signatures (CAS) are being investigated for the sourcing of chemical warfare (CW) agents and their starting materials that may be implicated in chemical attacks or CW proliferation. The work reported here demonstrates for the first time trace impurities produced during the synthesis of tris(2-chloroethyl)amine (HN3) that point to specific reagent stocks used in the synthesis of this CW agent. Thirty batches of HN3 were synthesized using different combinations of commercial stocks of triethanolamine (TEA), thionyl chloride, chloroform, and acetone. The HN3 batches and reagent stocks were then analyzed for impurities by gas chromatography/mass spectrometry. Reaction-produced impurities indicative of specific TEA and chloroform stocks were exclusively discovered in HN3 batches made with those reagent stocks. In addition, some reagent impurities were found in the HN3 batches that were presumably not altered during synthesis and believed to be indicative of reagent type regardless of stock. Supervised classification using partial least squares discriminant analysis (PLSDA) on the impurity profiles of chloroform samples from seven stocks resulted in an average classification error by cross-validation of 2.4%. A classification error of zero was obtained using the seven-stock PLSDA model on a validation set of samples from an arbitrarily selected chloroform stock. In a separate analysis, all samples from two of seven chloroform stocks that were purposely not modeled had their samples matched to a chloroform stock rather than assigned a “no class” classification.

chemical forensics↗

Butterfly Effects Arising from Starting Materials in Fused-Ring Electron Acceptors

We designed and synthesized a series of fused-ring electron acceptors (FREAs) based on naphthalene-fused octacyclic cores end-capped by 3-(1,1-dicyanomethylene)-5,6-difluoro-1- indanone (NOICs) using a bottom-up approach. The NOIC series shares the same end groups and side chains, as well as similar fused-ring cores. The butterfly effects, arising from different methoxy positions in the starting materials, impact the design of the final FREAs, as well as their molecular packing, optical and electronic properties, charge transport, film morphology, and performance of organic solar cells. Here, the binary-blend devices based on this NOIC series show power conversion efficiencies varying from 7.15% to 14.1%, due to the different intrinsic properties of the NOIC series, morphologies of blend films, and voltage losses of devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The MuvB complex binds and stabilizes nucleosomes downstream of the transcription start site of cell-cycle dependent genes

The chromatin architecture in promoters is thought to regulate gene expression, but it remains uncertain how most transcription factors (TFs) impact nucleosome position. The MuvB TF complex regulates cell-cycle dependent gene-expression and is critical for differentiation and proliferation during development and cancer. MuvB can both positively and negatively regulate expression, but the structure of MuvB and its biochemical function are poorly understood. Here we determine the overall architecture of MuvB assembly and the crystal structure of a subcomplex critical for MuvB function in gene repression. We find that the MuvB subunits LIN9 and LIN37 function as scaffolding proteins that arrange the other subunits LIN52, LIN54 and RBAP48 for TF, DNA, and histone binding, respectively. Biochemical and structural data demonstrate that MuvB binds nucleosomes through an interface that is distinct from LIN54-DNA consensus site recognition and that MuvB increases nucleosome occupancy in a reconstituted promoter. We find in arrested cells that MuvB primarily associates with a tightly positioned +1 nucleosome near the transcription start site (TSS) of MuvB-regulated genes. These results support a model that MuvB binds and stabilizes nucleosomes just downstream of the TSS on its target promoters to repress gene expression.

59 BASIC BIOLOGICAL SCIENCES↗

Uranium(iii) and thorium(iv) alkyl complexes as potential starting materials

The synthesis and characterization of a rare U(iii) alkyl complex, U[η 4 -Me 2 NC(H)C 6 H 5 ] 3 , using the dimethylbenzylamine (DMBA) ligand has been accomplished. While attempting to prepare the U(iv) compound, reduction to the U(iii) complex occurred. In the analogous Th(iv) system, C-H bond activation of a methyl group of one dimethylamine was observed yielding Th[η 4 -Me 2 NC(H)C 6 H 5 ] 2 [η 5 -(CH 2 )MeNC(H)C 6 H 5 ] with a dianionic DMBA ligand. The utility of these complexes as starting materials has been analyzed using a bulky dithiocarboxylate ligand to yield tetravalent actinide species.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A high-solid DES pretreatment using never-dried biomass as the starting material: towards high-quality lignin fractionation

This study investigated a high-solid diol deep eutectic solvent (DES) pretreatment using a wet substrate as the starting material. This pretreatment led to a remarkable glucan saccharification of 94.8% with efficient lignin and xylan removal (as high as 63.1% and 73.0%, respectively). Here the chemical structures of the substrates were analyzed comprehensively to reveal the impact of the pretreatment. In addition, over 90% of the removed lignin was recovered from the pretreated liquid, which exhibited a well-preserved β-O-4 structure (46–56/100Ar). The protection mechanism of our DES was investigated by 2D HSQC NMR, GPC, and 31 P NMR analysis. This study emphasized that diol-based DES pretreatment of undried lignocellulosic biomass at a high-solid loading can significantly utilize both carbohydrates and lignin fractions with high saccharification yields and high-quality lignin as a co-product.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dynamics starting at a conical intersection: Application to the photochemistry of pyrrole

The photochemical ring opening process in pyrrole has been investigated by performing classical on-the-fly dynamics using the multiconfiguration self-consistent field method for the computation of energies and energy gradients. As starting point for the dynamics the conical intersection corresponding to the ring-puckered ring-opened structure, determined previously [Barbatti et al., J. Chem. Phys. 125, 164323 (2006)], has been chosen. Two sets of initial conditions for the nuclear velocities were constructed: (i) nuclear velocities in the branching (g,h) plane of the conical intersection and (ii) statistical distribution for all atoms. Both sets of initial conditions show very similar results. Reactive trajectories are only found in a very limited sector in the (g,h) plane and reaction products are very similar. Within the simulation time of 1 ps, ring opening of pyrrole to the biradical NH=CH-CH-CH=CH chain followed by ring closure to a substituted cyclopropene structure (NH=CH-C{sub 3}H{sub 3}) is observed. The computed structural data correlate well with the experimentally observed dissociation products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Starting current of coaxial relative backward wave oscillator

This paper is devoted to study the starting current of the coaxial relativistic backward wave oscillator (CRBWO) using a simple physical model that employs the eigenmodes of the enclosed resonant cavity and the external quality factor of the open cavity Q. The agreement between the theoretical and simulation results is presented. It is found that CRBWO is suffering from the mode competition during the startup of the oscillation due to the wide interaction region over the range of the longitudinal wavenumbers.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Neoclassical equilibria as starting point for global gyrokinetic microturbulence simulations

The implementation of linearized operators describing inter- and like-species collisions in the global gyrokinetic particle-in-cell code ORB5[S. Jolliet, Comput. Phys. Commun. 177, 409 (2007)] is presented. A neoclassical axisymmetric equilibrium with self-consistent electric field can be obtained with no assumption made on the radial width of the particle trajectories. The formulation thus makes it possible to study collisional transport in regions where the neoclassical approximation breaks down such as near the magnetic axis. The numerical model is validated against both analytical results as well as other simulation codes. The effects of the poloidally asymmetric Fourier modes of the electric field are discussed, and the contribution of collisional kinetic electrons is studied. In view of subsequent gyrokinetic simulations of turbulence started from a neoclassical equilibrium, the problem of numerical noise inherent to the particle-in-cell approach is addressed. A novel algorithm for collisional gyrokinetic simulation switching between a local and a canonical Maxwellian background for, respectively, carrying out the collisional and collisionless dynamics is proposed, and its beneficial effects together with a coarse graining procedure [Y. Chen and S. E. Parker, Phys. Plasmas 14, 082301 (2007)] on noise and weight spreading reduction are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Start-to-end modelling of a mode-locked optical klystron free electron laser amplifier

A free electron laser (FEL) in a mode-locked optical klystron (MLOK) configuration is modelled using start-to-end simulations that simulate realistic electron beam acceleration and transport before input into a full three-dimensional FEL simulation code. These simulations demonstrate that the MLOK scheme is compatible with the present generation of radiofrequency accelerator designs. A train of few-optical cycle pulses is predicted with peak powers similar to those of the equivalent conventional FEL amplifier. The role of electron beam energy modulation in these results is explained and the limitations of some simulation codes discussed. It is shown how seeding the FEL interaction using a High Harmonic seed laser can improve the coherence properties of the output.

43 PARTICLE ACCELERATORS↗

Gamow-Teller Transitions Starting from T{sub z} = +3/2 Nucleus {sup 45}Sc

Owing to its simplicity and also its nature of spin-isospin ({sigma}{tau}) excitation, Gamow-Teller (GT) transitions play key roles in the studies of nuclear structure as well as astro-nuclear processes. We studied GT transitions starting from {sup 45}Sc in a high-resolution ({sup 3}He,t) charge-exchange reactions at 0 deg. and at an intermediate incoming energy of 140 MeV/nucleon. Individual GT transitions were observed up to high excitation energy of 10 MeV and a concentration of GT strength, a resonance-like structure, was observed at 6.5 MeV.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Start-to-end beam dynamics simulation of double triangular current profile generation in Argonne Wakefield Accelerator

Double triangular current profile (DT) gives a high transformer ratio which is the determining factor of the performance of collinear wakefield accelerator. This current profile can be generated using the emittance exchange (EEX) beam line. Argonne Wakefield Accelerator (AWA) facility plans to generate DT using the EEX beam line. We conducted start-to-end simulation for the AWA beam line using PARMELA code. Also, we discuss requirements of beam parameters for the generation of DT.

43 PARTICLE ACCELERATORS↗

Verifying the INF and START treaties

The INF and START Treaties form the basis for constraints on nuclear weapons. Their verification provisions are one of the great success stories of modern arms control and will be an important part of the foundation upon which the verification regime for further constraints on nuclear weapons will be constructed.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

A synthesis of LiFePO{sub 4} starting from FePO{sub 4} under reducing atmosphere

A fast and easy way to produce LiFePO{sub 4} starting from FePO{sub 4}, used as iron and phosphorus source, is proposed. 5% hydrogen is employed as a reducing agent and various compounds containing lithium as lithiation agents. The selected lithiation agents included: LiCl, CH{sub 3}COOLi, LiOH, Li{sub 2}S, LiH, and Li{sub 2}CO{sub 3}. Solid state synthesis is used for the LiFePO{sub 4} preparation and the so obtained materials are structurally characterized by XRD. The materials are used to fabricate composite electrode and their specific capacity is evaluated by low rate galvanostatic charge/discharge cycles (C/10 rate). Among the various lithium salts, the acetate give rise to the LiFePO{sub 4} with the best electrochemical performance. The morphology of this material is further investigated by SEM microscopy and the specific capacity is evaluated as a function of the discharge rate and the cycle number.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Plasma current start-up by the outer ohmic heating coils in the Saskatchewan TORus Modified (STOR-M) iron core tokamak

A plasma current up to 15 kA has been driven with outer ohmic heating (OH) coils in the STOR-M iron core tokamak. Even when the inner OH coil is disconnected, the outer OH coils alone can induce the plasma current as primary windings and initial breakdown are even easier in this coil layout. Our results suggest a possibility to use an iron core in a spherical tokamak to start up the plasma current without a central solenoid. Finally, the effect of the iron core saturation on the extension of the discharge pulse length has been estimated for further experiments in the STOR-M tokamak.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Experimental demonstration of a single-spike hard-X-ray free-electron laser starting from noise

In this letter, we report the experimental demonstration of single-spike hard-X-ray free-electron laser pulses starting from noise with multi-eV bandwidth. Here, this is accomplished by shaping a low-charge electron beam with a slotted emittance spoiler and by adjusting the transport optics to optimize the beam-shaping accuracy. Based on elementary free-electron laser scaling laws, we estimate the pulse duration to be less than 1 fs full-width at half-maximum.

43 PARTICLE ACCELERATORS↗