Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SPLINE FUNCTIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Biharmonic spline interpolation of GEOS-3 and Seasat altimeter data

An algorithm is presented for determining the minimum curvature surface passing through a set of nonuniformly spaced data points. The curve is generated as a linear combination of Green functions for the biharmonic operator at each data point, with the amplitudes of the functions adjusted so that the interpolating surfaces passes through each point. The function passing through the points can be regarded as a spline to which point forces are applied, defining the minimum curvature between the points. The technique was used to combine the along track slopes of the GEOS-3 and Seasat altimeter data into a consistent geoid height map of the Caribbean area, covering 0.5 million data points in the process. Sample images are provided and new topographic features that are revealed are discussed.

Sandwell, David T.↗

Spline based least squares integration for two-dimensional shape or wavefront reconstruction

In this paper, we present a novel method to handle two-dimensional shape or wavefront reconstruction from its slopes. The proposed integration method employs splines to fit the measured slope data with piecewise polynomials and uses the analytical polynomial functions to represent the height changes in a lateral spacing with the pre-determined spline coefficients. The linear least squares method is applied to estimate the height or wavefront as a final result. Numerical simulations verify that the proposed method has less algorithm errors than two other existing methods used for comparison. Especially at the boundaries, the proposed method has better performance. The noise influence is studied by adding white Gaussian noise to the slope data. Finally, experimental data from phase measuring deflectometry are tested to demonstrate the feasibility of the new method in a practical measurement.

42 ENGINEERING↗

Evaluation of interpolation methods for surface-based motion compensated tomographic reconstruction for cardiac angiographic C-arm data

Purpose: For interventional cardiac procedures, anatomical and functional information about the cardiac chambers is of major interest. With the technology of angiographic C-arm systems it is possible to reconstruct intraprocedural three-dimensional (3D) images from 2D rotational angiographic projection data (C-arm CT). However, 3D reconstruction of a dynamic object is a fundamental problem in C-arm CT reconstruction. The 2D projections are acquired over a scan time of several seconds, thus the projection data show different states of the heart. A standard FDK reconstruction algorithm would use all acquired data for a filtered backprojection and result in a motion-blurred image. In this approach, a motion compensated reconstruction algorithm requiring knowledge of the 3D heart motion is used. The motion is estimated from a previously presented 3D dynamic surface model. This dynamic surface model results in a sparse motion vector field (MVF) defined at control points. In order to perform a motion compensated reconstruction, a dense motion vector field is required. The dense MVF is generated by interpolation of the sparse MVF. Therefore, the influence of different motion interpolation methods on the reconstructed image quality is evaluated. Methods: Four different interpolation methods, thin-plate splines (TPS), Shepard's method, a smoothed weighting function, and a simple averaging, were evaluated. The reconstruction quality was measured on phantom data, a porcine model as well as on in vivo clinical data sets. As a quality index, the 2D overlap of the forward projected motion compensated reconstructed ventricle and the segmented 2D ventricle blood pool was quantitatively measured with the Dice similarity coefficient and the mean deviation between extracted ventricle contours. For the phantom data set, the normalized root mean square error (nRMSE) and the universal quality index (UQI) were also evaluated in 3D image space. Results: The quantitative evaluation of all experiments showed that TPS interpolation provided the best results. The quantitative results in the phantom experiments showed comparable nRMSE of Almost-Equal-To 0.047 {+-} 0.004 for the TPS and Shepard's method. Only slightly inferior results for the smoothed weighting function and the linear approach were achieved. The UQI resulted in a value of Almost-Equal-To 99% for all four interpolation methods. On clinical human data sets, the best results were clearly obtained with the TPS interpolation. The mean contour deviation between the TPS reconstruction and the standard FDK reconstruction improved in the three human cases by 1.52, 1.34, and 1.55 mm. The Dice coefficient showed less sensitivity with respect to variations in the ventricle boundary. Conclusions: In this work, the influence of different motion interpolation methods on left ventricle motion compensated tomographic reconstructions was investigated. The best quantitative reconstruction results of a phantom, a porcine, and human clinical data sets were achieved with the TPS approach. In general, the framework of motion estimation using a surface model and motion interpolation to a dense MVF provides the ability for tomographic reconstruction using a motion compensation technique.

60 APPLIED LIFE SCIENCES↗

Tungsten anode spectral model using interpolating cubic splines: Unfiltered x-ray spectra from 20 kV to 640 kV

Purpose: Monte Carlo methods were used to generate lightly filtered high resolution x-ray spectra spanning from 20 kV to 640 kV. Methods: X-ray spectra were simulated for a conventional tungsten anode. The Monte Carlo N-Particle eXtended radiation transport code (MCNPX 2.6.0) was used to produce 35 spectra over the tube potential range from 20 kV to 640 kV, and cubic spline interpolation procedures were used to create piecewise polynomials characterizing the photon fluence per energy bin as a function of x-ray tube potential. Using these basis spectra and the cubic spline interpolation, 621 spectra were generated at 1 kV intervals from 20 to 640 kV. The tungsten anode spectral model using interpolating cubic splines (TASMICS) produces minimally filtered (0.8 mm Be) x-ray spectra with 1 keV energy resolution. The TASMICS spectra were compared mathematically with other, previously reported spectra. Results: Using pairedt-test analyses, no statistically significant difference (i.e., p > 0.05) was observed between compared spectra over energy bins above 1% of peak bremsstrahlung fluence. For all energy bins, the correlation of determination (R{sup 2}) demonstrated good correlation for all spectral comparisons. The mean overall difference (MOD) and mean absolute difference (MAD) were computed over energy bins (above 1% of peak bremsstrahlung fluence) and over all the kV permutations compared. MOD and MAD comparisons with previously reported spectra were 2.7% and 9.7%, respectively (TASMIP), 0.1% and 12.0%, respectively [R. Birch and M. Marshall, “Computation of bremsstrahlung x-ray spectra and comparison with spectra measured with a Ge(Li) detector,” Phys. Med. Biol. 24, 505–517 (1979)], 0.4% and 8.1%, respectively (Poludniowski), and 0.4% and 8.1%, respectively (AAPM TG 195). The effective energy of TASMICS spectra with 2.5 mm of added Al filtration ranged from 17 keV (at 20 kV) to 138 keV (at 640 kV); with 0.2 mm of added Cu filtration the effective energy was 9 keV at 20 kV and 169 keV at 640 kV. Conclusions: Ranging from 20 kV to 640 kV, 621 x-ray spectra were produced and are available at 1 kV tube potential intervals. The spectra are tabulated at 1 keV intervals. TASMICS spectra were shown to be largely equivalent to published spectral models and are available in spreadsheet format for interested users by emailing the corresponding author (JMB)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

On nonconvergence of adjoint semigroups for control systems with delays

The spline scheme of Banks and Kappel (1979) is used as an aproximation method for calculating optimal feedback gains for control systems governed by functional differential equations. It is shown that the adjoints of the spline-based approximation scheme for delay equations do not converge strongly.

Burns, John↗

Inclusion Capture Probability Prediction Model for Bubble Floatation in Turbulent Steel Flow

The turbulent flow around bubbles is simulated for the fixed turbulent kinetic energy. Inclusion motion through the flow field is studied by considering the stochastic effect of turbulence to calculate the capture probability of inclusions with different sizes to a fixed-size individual bubble according to the redefinition. Using the cubic spline interpolation, the capture probability is predicted as functions of the bubble size, inclusion size and turbulent kinetic energy.

36 MATERIALS SCIENCE↗

Quality Quandaries: Predicting a Population of Curves

We present a random effects spline regression model based on splines that provides an integrated approach for analyzing functional data, i.e., curves, when the shape of the curves is not parametrically specified. An analysis using this model is presented that makes inferences about a population of curves as well as features of the curves.

42 ENGINEERING↗

Comparison of hot wire/laser velocimeter turbulence intensity measurements

The question of whether a random measure of particle velocities yields a good statistical estimate of the stationary condition of the turbulence flow field was investigated by comparing hot-wire and laser velocimeter turbulence intensity measurements. Great care was taken to insure that the instrument precision of both the laser velocimeter and hot wire was maximized. In this attempt to reduce the measurement uncertainties in the hot wire, direct digitization of the analog output signal was performed with point-by-point conversion to velocity through a spline fit calibration curve and the turbulence intensity function was calculated statistically. Frequent calibrations of the hot wire were performed using the laser velocimeter as the velocity standard to account for the presence of the small seed particles in the air flow and signal drift in the hot wire.

Meyers, J. F.↗

The spectral world coordinate systems in IRAF/NOAO

The world coordinate system (WCS) for dispersion calibrated spectra used in the IRAF/NOAO spectroscopy packages is described. In particular, the image header keywords which define the coordinates in an 'image' pixel array. These keywords appear both as part of the IRAF image structure and map directly to FITS format. The types of spectra include multidimensional images with spectral dispersion as one axis, one dimensional images, and a special 'multispec' format consisting of multiple, semi-independent, one dimensional spectra in two or three dimensional images. The types of coordinate systems include multidimensional linear coordinates with individual keywords and one dimensional linear and nonlinear coordinates for the 'multispec' images stored in IRAF WCS attributes. The nonlinear world coordinate systems include polynomial, spline, sampled table, and look-up table function representations.

Valdes, F.↗

How to fly an aircraft with control theory and splines

When trying to fly an aircraft as smoothly as possible it is a good idea to use the derivatives of the pilot command instead of using the actual control. This idea was implemented with splines and control theory, in a system that tries to model an aircraft. Computer calculations in Matlab show that it is impossible to receive enough smooth control signals by this way. This is due to the fact that the splines not only try to approximate the test function, but also its derivatives. A perfect traction is received but we have to pay in very peaky control signals and accelerations.

Karlsson, Anders↗

LQR Control of Thin Shell Dynamics: Formulation and Numerical Implementation

A PDE-based feedback control method for thin cylindrical shells with surface-mounted piezoceramic actuators is presented. Donnell-Mushtari equations modified to incorporate both passive and active piezoceramic patch contributions are used to model the system dynamics. The well-posedness of this model and the associated LQR problem with an unbounded input operator are established through analytic semigroup theory. The model is discretized using a Galerkin expansion with basis functions constructed from Fourier polynomials tensored with cubic splines, and convergence criteria for the associated approximate LQR problem are established. The effectiveness of the method for attenuating the coupled longitudinal, circumferential and transverse shell displacements is illustrated through a set of numerical examples.

delRosario, R. C. H.↗

A numerical approach for solving a class of variable-order fractional functional integral equations

This paper proposes new discretization techniques to estimate variable-order fractional integral operators based on the piecewise integro quadratic spline interpolation. The proposed methods are modified to solve a class of variable-order fractional functional integral equations. Moreover, we investigate the performance of the proposed methods by solving the variable-order fractional pantograph and Emden–Fowler functional integral equations.

97 MATHEMATICS AND COMPUTING↗

Some new function spaces of variable smoothness

A new Besov space of variable smoothness is introduced on which the norm is defined in terms of difference relations. This space is shown to be the trace of a weighted Sobolev space with a weight in the corresponding Muckenhoupt class. Methods of nonlinear spline approximation are applied to derive an atomic decomposition theorem for functions in a Besov space of variable smoothness. A complete description of traces on the hyperplane of a Besov space of variable smoothness and of a weighted Besov space with a weight in the corresponding Muckenhoupt class is given. Bibliography: 27 titles.

97 MATHEMATICS AND COMPUTING↗

Physics-based dimension reduction in uncertainty quantification for radiative transfer

We present a physics-based methodology for quantifying the uncertainty in a given quantity of interest (QOI) that is contributed by uncertainties in opacities in radiation transport problems. Typically, opacities are tabulated as a function of density, temperature, and photon energy group. The size of this table makes a study of uncertainties at this level challenging because of the well-known 'curse of dimensionality.' We address this by studying uncertain parameters in the underlying physical model that generates the opacity tables. At this level, there are fewer uncertain parameters but still too many to analyze directly through computationally expensive radiation transport simulations. In order to explore this large uncertain parameter space, we develop two simplified radiation transport problems that are much less computationally demanding than the target problem of interest. An emulator is created for each QOI for each simplified problem using Bayesian Multivariate Adaptive Regression Splines (BMARS). This emulator is used to create a functional relationship between the QOIs and the uncertain parameters. Sensitivity analysis is performed using the emulator to determine which parameters contribute significantly to the uncertainty. This physics-based screening process reduces the dimension of the parameter space that is then studied via the computationally expensive radiation transport calculation to generate distributions of quantities of interest. Results of this research demonstrate that the QOIs for the target problem agree for varying screening criteria determined by the sensitivity analysis, and the QOIs agree well for varying Latin Hypercube Design (LHD) sample sizes for the uncertain space. (authors)

97 MATHEMATICS AND COMPUTING↗

Recursive algorithms for two-dimensional smoothing using bicubic hermite polynomial

It is noted that in the past, smoothing splines originated from approximation theory have been successfully applied to data filtering and image smoothing problems. Even though the nonrecursive technique of smoothing splines gives an optimal solution, the amount of computation increases rapidly with the size of the two-dimensional data. A derivation is presented here of quarter-plane filtering algorithms that provide smoothed estimates of function values and their derivatives by fitting two-dimensional smoothing splines in a recursive manner. The derivation procedure sheds light on specific problems encountered in two-dimensional filtering problems. What is more, the amount of computation for this recursive processor increases only linearly with the size of the two-dimensional data. Because of certain approximations introduced in its derivation, this recursive processor becomes suboptimal.

Kim, C. S.↗

Effective collision strengths for fine-structure transitions in Si VII

The effective collision strengths for electron-impact excitation of fine-structure transitions in Si VII are calculated as a function of electron temperature in the range 5000-2,000,000 K. The B-spline Breit-Pauli R-matrix method has been used to calculate collision strengths by electron impact. The target wave functions have been obtained using the multi-configuration Hartree-Fock method with term-dependent non-orthogonal orbitals. The 92 fine-structure levels belonging to the 46 LS states of 2s {sup 2}2p {sup 4}, 2s2p {sup 5}, 2p {sup 6}, 2s {sup 2}2p {sup 3}3s, 2s {sup 2}2p {sup 3}3p, 2s {sup 2}2p {sup 3}3d, and 2s2p {sup 4}3s configurations are included in our calculations of oscillator strengths and collision strengths. There are 4186 possible fine-structure allowed and forbidden transitions among the 92 levels. The present excitation energies, oscillator strengths, and collision strengths have been compared with previous theoretical results and available experimental data. Generally, a good agreement is found with the 6 LS-state close-coupling approximation results of Butler and Zeippen and the 44 LS-state distorted wave calculation of Bhatia and Landi.

74 ATOMIC AND MOLECULAR PHYSICS↗

Noise correction on LANDSAT images using a spline-like algorithm

Many applications using LANDSAT images face a dilemma: the user needs a certain scene (for example, a flooded region), but that particular image may present interference or noise in form of horizontal stripes. During automatic analysis, this interference or noise may cause false readings of the region of interest. In order to minimize this interference or noise, many solutions are used, for instane, that of using the average (simple or weighted) values of the neighboring vertical points. In the case of high interference (more than one adjacent line lost) the method of averages may not suit the desired purpose. The solution proposed is to use a spline-like algorithm (weighted splines). This type of interpolation is simple to be computer implemented, fast, uses only four points in each interval, and eliminates the necessity of solving a linear equation system. In the normal mode of operation, the first and second derivatives of the solution function are continuous and determined by data points, as in cubic splines. It is possible, however, to impose the values of the first derivatives, in order to account for shapr boundaries, without increasing the computational effort. Some examples using the proposed method are also shown.

Vijaykumar, N. L.↗

Predicting protein concentrations with ELISA microarray assays, monotonic splines and Monte Carlo simulation

Background: A microarray of enzyme-linked immunosorbent assays, or ELISA microarray, predicts simultaneously the concentrations of numerous proteins in a small sample. These predictions, however, are uncertain due to processing error and biological variability. Making sound biological inferences as well as improving the ELISA microarray process require require both concentration predictions and creditable estimates of their errors. Methods: We present a statistical method based on monotonic spline statistical models, penalized constrained least squares fitting (PCLS) and Monte Carlo simulation (MC) to predict concentrations and estimate prediction errors in ELISA microarray. PCLS restrains the flexible spline to a fit of assay intensity that is a monotone function of protein concentration. With MC, both modeling and measurement errors are combined to estimate prediction error. The spline/PCLS/MC method is compared to a common method using simulated and real ELISA microarray data sets. Results: In contrast to the rigid logistic model, the flexible spline model gave credible fits in almost all test cases including troublesome cases with left and/or right censoring, or other asymmetries. For the real data sets, 61% of the spline predictions were more accurate than their comparable logistic predictions; especially the spline predictions at the extremes of the prediction curve. The relative errors of 50% of comparable spline and logistic predictions differed by less than 20%. Monte Carlo simulation rendered acceptable asymmetric prediction intervals for both spline and logistic models while propagation of error produced symmetric intervals that diverged unrealistically as the standard curves approached horizontal asymptotes. Conclusions: The spline/PCLS/MC method is a flexible, robust alternative to a logistic/NLS/propagation-of-error method to reliably predict protein concentrations and estimate their errors. The spline method simplifies model selection and fitting, and reliably estimates believable prediction errors. For the 50% of the real data sets fit well by both methods, spline and logistic predictions are practically indistinguishable, varying in accuracy by less than 15%. The spline method may be useful when automated prediction across simultaneous assays of numerous proteins must be applied routinely with minimal user intervention.

59 BASIC BIOLOGICAL SCIENCES↗