Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SHIELDING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Influence of mixer nozzle velocity decay characteristics on CTOL-OTW jet noise shielding

Jet noise shielding benefits for CTOL engine-over-the-wing configurations were obtained with model scale multitube and lobed mixer nozzles and various shielding surface geometries. Spectral data were obtained with jet velocities from 585 to 1110 ft/sec. Correlation equations for predicting jet noise shielding benefits with single conical nozzle installations were modified to correlate the mixer nozzle data. The modification included consideration of the number of nozzle elements and the peak axial velocity decay in the flow field adjacent to the shielding surface. The effect of forward velocity on jet noise attenuation by a shielding surface is discussed.

Vonglahn, U.↗
NASA NTRS1975

Honeycomb thermal shield study

A honeycomb thermal shield is described which is an economical and reliable alternative to existing thermal shielding methods for reducing the radiated heat loss from elements which will not allow obstructions in the field of view. The device is simply open-face honeycomb of the type used throughout the aerospace industry for structural panels. The honeycomb thermal shield uses only the core of the honeycomb panel, so it has little structural stiffness and is transparent through the cells. It is located in close proximity to, but conductively decoupled from, the element to be shielded (the radiative source) with the axis of the honeycomb cells parallel to the view direction of the source. The source radiates into a 2pi steradian field occupied by the shield. The view field will be transparent along the axis of the honeycomb but will be increasingly obscured as the off-normal view angle increases. The angular dependence is a function of the cell height to width ratio.

Dombroski, R. M.↗
NASA NTRS1975

Influence of mixer nozzle velocity decay characteristics on CTOL-OTW jet noise shielding

Jet noise shielding benefits for CTOL engine-over-wing configurations were obtained with model-scale multitube and lobed mixer nozzles and various shielding surface geometries. Spectral data were obtained with jet velocities from 585 to 1110 ft/sec. Correlation equations for predicting jet noise shielding benefits with single conical nozzle installations were modified to correlate the mixer nozzle data. The modification included consideration of the number of nozzle elements and the peak axial velocity decay in the flow field adjacent to the shielding surface. The effect of forward velocity on jet noise attenuation by a shielding surface is discussed.

Von Glahn, U.↗
NASA NTRS1975

Design and preliminary test results at Mach 5 of an axisymmetric slotted sound shield

The basic theory and sound attenuation mechanisms, the design procedures, and preliminary experimental results are presented for a small axisymmetric sound shield for supersonic wind tunnels. The shield consists of an array of small diameter rods aligned nearly parallel to the entrance flow with small gaps between the rods for boundary layer suction. Results show that at the lowest test Reynolds number (based on rod diameter) of 52,000 the noise shield reduced the test section noise by about 60 percent ( or 8 db attenuation) but no attenuation was measured for the higher range of test reynolds numbers from 73,000 to 190,000. These results are below expectations based on data reported elsewhere on a flat sound shield model. The smaller attenuation from the present tests is attributed to insufficient suction at the gaps to prevent feedback of vacuum manifold noise into the shielded test flow and to insufficient suction to prevent transition of the rod boundary layers to turbulent flow at the higher Reynolds numbers. Schlieren photographs of the flow are shown.

Beckwith, I. E.↗
NASA NTRS1976

Heat shield characterization: Outer planet atmospheric entry probe

A full scale carbon phenolic heat shield was fabricated for the Outer Planet Probe in order to demonstrate the feasibility of molding large carbon phenolic parts with a new fabrication processing method (multistep). The sphere-cone heat shield was molded as an integral unit with the nose cap plies configured into a double inverse chevron shape to achieve the desired ply orientation. The fabrication activity was successful and the feasibility of the multistep processing technology was established. Delaminations or unbonded plies were visible on the heat shield and resulted from excessive loss of resin and lack of sufficient pressure applied on the part during the curing cycle. A comprehensive heat shield characterization test program was conducted, including: nondestructive tests with the full scale heat shield and thermal and mechanical property tests with small test specimen.

Mezines, S. A.↗
NASA NTRS1975

Wind tunnel blockage tests at Mach 5 of vacuum duct models for two sound radiation shields

Two sound shield models with dummy vacuum exhaust ducts were tested in a Mach 5 pilot quiet tunnel. The first model simulates a new sound shield of 3 in. (7.62 cm) inside diameter and the second model is a shield of 4 in. (10.16 cm) inside diameter. The dummy vacuum exhaust ducts were attached to the external housing of the models. The flow in the first model, which had a by pass mass flow ratio of about 0.6, could not be started except at the two highest test Reynolds numbers where only the central core flow region was started. The flow in the second model with a mass ratio of approximately 0.3 was fully started except at the lowest unit Reynolds number where some unsteadiness and partial flow separation at the wall was observed. Since the external housing and dummy vacuum ducts were the same for both models, these results indicate that the ratio of by pass mass flow to total mass flow for a wind tunnel sound shield of this particular design must be less than about 0.3. Hence, a lower limit is imposed on the inlet diameter of the sound shield in relation to the exit diameter of the wind tunnel nozzle. This lower limit on the inlet diameter may possibly be reduced by improvements in streamlining of the external housing and ducts, by reductions in blockage area, or by the use of external ducting shrouds.

Beckwith, I. E.↗
NASA NTRS1975

Weight optimization methods in space radiation shield design

An empirical relation between proton range and material density is used to examine relations between shield weight, geometry, and material composition for shielding against a space proton environment. The optimum material resulting in minimum shield weight usually lies at the extremes of either the lightest or heaviest materials. Aluminum, which has special prominence in the space program, appears universally suboptimal as a radiation shielding material. Assuming square-box geometry (rectangular prisms with two square faces), the optimum shape for the shielded objects is found to be a cube, although moderate deviations from a cube result in only a small weight penalty.

Wilson, J. W.↗
NASA NTRS1976

Ion beam thruster shield

An ion thruster beam shield is provided that comprises a cylindrical housing that extends downstream from the ion thruster and a plurality of annular vanes which are spaced along the length of the housing, and extend inwardly from the interior wall of the housing. The shield intercepts and stops all charge exchange and beam ions, neutral propellant, and sputter products formed due to the interaction of beam and shield emanating from the ion thruster outside of a fixed conical angle from the thruster axis. Further, the shield prevents the sputter products formed during the operation of the engine from escaping the interior volume of the shield.

Power, J. L.↗
NASA NTRS1979

Report of the Ad Hoc Committee on the assessment of models of a wake shield environment around various spacecraft, Universities Space Research Association

Models depicting the ambient atmosphere which can overtake the spacecraft vacuum shield are presented. The subject areas discussed are: possible changing effects on the wake shield environment; possible utilization of the induced environmental contamination monitor; present state of the knowledge of the parameters used to describe the intermolecular collisions; the possibility of using simple models to describe the wake shield environment; possible errors associated with using kinetic theory to calculate that part of the atmosphere overtaking the shield; and a general assessment of the Monte Carlo techniques used to calculate the shield environment.

Wu, S. T.↗
NASA NTRS1980

Noise reduction in a Mach 5 wind tunnel with a rectangular rod-wall sound shield

A rod wall sound shield was tested over a range of Reynolds numbers of 0.5 x 10 to the 7th power to 8.0 x 10 to the 7th power per meter. The model consisted of a rectangular array of longitudinal rods with boundary-layer suction through gaps between the rods. Suitable measurement techniques were used to determine properties of the flow and acoustic disturbance in the shield and transition in the rod boundary layers. Measurements indicated that for a Reynolds number of 1.5 x 10 to the 9th power the noise in the shielded region was significantly reduced, but only when the flow is mostly laminar on the rods. Actual nozzle input noise measured on the nozzle centerline before reflection at the shield walls was attenuated only slightly even when the rod boundary layer were laminar. At a lower Reynolds number, nozzle input noise at noise levels in the shield were still too high for application to a quiet tunnel. At Reynolds numbers above 2.0 x 10 the the 7th power per meter, measured noise levels were generally higher than nozzle input levels, probably due to transition in the rod boundary layers. The small attenuation of nozzle input noise at intermediate Reynolds numbers for laminar rod layers at the acoustic origins is apparently due to high frequencies of noise.

Creel, T. R., Jr.↗
NASA NTRS1980

Effect of a semi-annular thermal acoustic shield on jet exhaust noise

Reductions in jet exhaust noise obtained by the use of an annular thermal acoustic shield consisting of a high temperature, low velocity gas stream surrounding a high velocity central jet exhaust appear to be limited by multiple reflections. The effect of a semi-annular shield on jet exhaust noise was investigted with the rationale that such a configuration would eliminate or reduce the multiple reflection mechanism. Noise measurements for a 10 cm conical nozzle with a semi-annular acoustic shield are presented in terms of lossless free field data at various angular locations with respect to the nozzle. Measurements were made on both the shielded and unshielded sides of the nozzle. The results are presented parametrically, showing the effects of various shield and central system velocities and temperatures. Selected results are scaled up to a typical full scale engine size to determine the perceived noise level reductions.

Goodykoontz, J.↗
NASA NTRS1981

Shielded conductor cable system

A cable system carries one or more insulated conductors completely enclosed within a shield having one end connected to ground. A lightning protector network connects the other end of the shield to ground. The protector network is normally open circuited and becomes only short circuited in response to a momentary abnormal surge voltage induced in the shield. The protector network's open to short impedance change completes a conductive circuit path between the shield and the two grounded ends for conducting a shield current which has the desired effect of protecting the signal carrying conductors in the cable from the large surge voltage.

Castle, K. D.↗
NASA NTRS1980

Effect of a semi-annular thermal acoustic shield on jet exhaust noise

The effect of a semi-annular acoustic shield on jet exhaust noise is investigated with the rationale that such a configuration would reduce or eliminate the multiple reflection mechanism. A limited range of flow conditions for one nozzle/shield configuration were studied at model scale. Noise measurements for a 10 cm conical nozzle with a semi-annular acoustical shield are presented in terms of lossless free field data at various angular locations with respect to the nozzle. Measurements were made on both the shielded and unshielded sides of the nozzle. Model scale overall sound pressure level directivity patterns and comparisons of model scale spectral data are provided. The results show that a semi-annular thermal acoustic shield consisting of a low velocity, high temperature gas stream partially surrounding a central jet exhibits lower noise levels than when the central jet is operated alone. The results are presented parametrically, showing the effects of various shield and central system velocities and temperatures.

Goodykoontz, J.↗
NASA NTRS1981

Two-dimensional analytical model of twin jet shielding

Estimation of the impact of jet noise requires analytical modeling not only of the noise source mechanism, but also of the propagation of noise from the source to receiver. One factor which influences the jet noise path is shielding of one jet by another in a twin jet configuration. An analytical model is developed to investigate the shielding phenomenon. The two-dimensional wave equation is solved for a stationary line source impinging upon a cylinder of heated flow. The solution estimates the diffraction and scattering of the incident sound wave by the shielding jet in a plane normal to the jet axis. The frequency dependence of the normalized sound pressure estimated by the model is found to agree in form with empirical data. The azimuthal redistribution of the incident sound shows that, as the frequency of maximum shielding is approached, the scattered sound becomes more highly concentrated into lobes adjacent to the shielding zone.

Gerhold, C. H.↗
NASA NTRS1985

Shielding of CO from dissociating radiation in interstellar clouds

The paper investigates the photodissociation of CO in interstellar clouds in the light of recent laboratory studies which suggest that line rather than continuum processes dominate its dissociation by ultraviolet radiation. Using a simple radiative transfer model, the shielding of representative dissociating bands is estimated, including self-shielding, mutual shielding between different isotopes, and near coincidences with strong lines of H2. Each of these processes materially affects the photodestruction rates of the various isotopic species in the transition regions of molecular clouds. These results are combined with an appropriate gas phase chemical model to determine how the abundances of the CO isotopes vary with depth into the cloud. It is found that self-shielding and mutual shielding cause significant variations in isotopic ratios. In addition, fractionation enhances species containing C-13. The relationship between the column densities of CO and H2 is found to vary for the different isotopes and to be sensitive to local conditions.

Glassgold, A. E.↗
NASA NTRS1986

Radiation environment and shielding for early manned Mars missions

The problem of shielding a crew during early manned Mars missions is discussed. Requirements for shielding are presented in the context of current astronaut exposure limits, natural ionizing radiation sources, and shielding inherent in a particular Mars vehicle configuration. An estimated range for shielding weight is presented based on the worst solar flare dose, mission duration, and inherent vehicle shielding.

Hall, Stephen B.↗
NASA NTRS1988

Experimental evaluation of resistojet thruster plume shields

The exhaust of an engineering model resistojet has been investigated using rotary pitot probes and a rotary quartz crystal microbalance. The resistojet operated on CO2 propellant at a mass flow rate of 0.29 g/sec in both heated and unheated flows. Measurements of local flow angles in the near field of a conical plume shield indicated that the shield was not wholly effective in confining the flow to the region upstream of its exit plane. However, the absolute levels of the measured mass flux into the backflow region were very low, on the order of 7 x 10 to the -7 power g/sqcm/sec or less. The use of a circualr disk at the exit plane of the existing conical shield showed some benefit in decreasing the amount of backflow by a factor of two. Lastly, a detached shield placed upstream of the resistojet exit plane demonstrated a small degree of local shielding for the region directly behind it.

Carney, Lynnette M.↗
NASA NTRS1988

Experimental evaluation of resistojet thruster plume shields

The exhaust of an engineering model resistojet has been investigated using rotary pitot probes and a rotary quartz crystal microbalance. The resistojet operated on CO2 propellant at a mass flow rate of 0.29 g/sec in both heated and unheated flows. Measurements of local flow angles in the near field of a conical plume shield indicated that the shield was not wholly effective in confining the flow to the region upstream of its exit plane. However, the absolute levels of the measured mass flux into the backflow region were very low, on the order of 7 x 10 to the -7 power g/sq cm/sec or less. The use of a circular disk at the exit plane of the existing conical shield showed some benefit in decreasing the amount of backflow by a factor of two. Lastly, a detached shield placed upstream of the resistojet exit plane demonstrated a small degree of local shielding for the region directly behind it.

Carney, Lynnette M.↗