Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SEE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Electron Tomography: Seeing Atoms in Three Dimensions

Our eyes - a parallel lens system - have the phenomenal ability to observe and "reconstruct" the three-dimensional world, relaying a 3-D image to our brains. Imaging of the nanoworld is best done with electrons rather than photons because of their lower wavelengths and higher resolution. The advent of aberration-correction has led to transmission electron microscopes with sub-Angstrom resolution that can resolve single atoms. Yet, no matter what detector is used, the resulting images are only two-dimensional projections of three-dimensional objects. Electron tomography is a technique that allows reconstruction of the three-dimensional structure and morphology of nanomaterials from such projections. X-ray tomography has been used in many branches of science for nearly half a century, and in the biological sciences electron tomography has been a powerful tool for understanding ultrastructure. However, for many years crystalline materials posed a challenge to electron tomography because diffraction contrast (a change in intensity in the image at particular crystal orientations) creates artifacts in the 3-D reconstruction. In 2003, with advances in scanning transmission electron microscopy, Midgley and colleagues obtained the first electron tomograms of crystalline materials. Shortly thereafter, Arslan et al. showed that the spatial resolution could be improved to 1 nm in all three spatial dimensions and visualized the formation of faceted 3.5-nm quantum dots embedded in a Si matrix. However, with that work existing reconstruction algorithms appeared to have reached their limit. To attain a resolution of 1 nm, a total of 140 images over ±78 degrees of tilt were needed. Writing in Nature Materials, Goris et al. now report a novel algorithm for 3-D reconstruction of the atomic structure of free-standing Au nanorods, using only four projection images. I.A. acknowledges collaboration with J.D. Roehling, K.J. Batenburg, B.C. Gates and A. Katz for Figure 1, supported in part by the DOE BES DE-SC0005822, and in part by the LDRD program at PNNL. The Pacific Northwest National Laboratory is operated by Battelle under contract DE-AC05-76RL01830.

Arslan, Ilke↗

Seeing structural evolution of organic molecular nano-crystallites using 4D scanning confocal electron diffraction (4D-SCED)

Abstract Direct observation of organic molecular nanocrystals and their evolution using electron microscopy is extremely challenging, due to their radiation sensitivity and complex structure. Here, we introduce 4D-scanning confocal electron diffraction (4D-SCED), which enables direct in situ observation of bulk heterojunction (BHJ) thin films. 4D-SCED combines confocal electron optic setup with a pixelated detector to record focused spot-like diffraction patterns with high angular resolution, using an order of magnitude lower dose than previous methods. We apply it to study an active layer in organic solar cells, namely DRCN5T:PC 71 BM BHJ thin films. Structural details of DRCN5T nano-crystallites oriented both in- and out-of-plane are imaged at ~5 nm resolution and dose budget of ~5 e − /Å 2 . We use in situ annealing to observe the growth of the donor crystals, evolution of the crystal orientation, and progressive enrichment of PC 71 BM at interfaces. This highly dose-efficient method opens more possibilities for studying beam sensitive soft materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Seeing is believing: visualization of antiferromagnetic domains

Abstract Understanding and utilizing novel antiferromagnetic (AFM) materials has been recently one of the central issues in condensed matter physics, as well as in materials science and engineering. The relevant contemporary topics include multiferroicity, topological magnetism and AFM spintronics. The ability to image magnetic domains in AFM materials is of key importance for the success of these exciting fields. While imaging techniques of magnetic domains on the surfaces of ferro-(ferri)magnetic materials with, for example, magneto-optical Kerr microscopy and magnetic force microscopy have been available for a number of decades, AFM domain imaging is a relatively new development. We review various experimental techniques utilizing scanning, optical, and synchrotron X-ray probes to visualize AFM domains and domain walls, and to unveil their physical properties. We also discuss the existing challenges and opportunities in these techniques, especially with further increase of spatial and temporal resolution.

36 MATERIALS SCIENCE↗

Seeing the invisible plasma with transient phonons in cuprous oxide

Here, the emission of phonons from electron–hole plasma is the primary limit on the efficiency of photovoltaic devices operating above the bandgap. In cuprous oxide (Cu 2 O) there is no luminescence from electron–hole plasma. Therefore, we searched for optical phonons emitted by energetic charge carriers using phonon-to-exciton upconversion transitions. We found 14 meV phonons with a lifetime of 0.916 ± 0.008 ps and 79 meV phonons that are longer lived and overrepresented. It is surprising that the higher energy phonon has a longer lifetime.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Seeing Oxygen disorder in YSZ/SrTiO3 colossal ionic conductor heterostructures using EELS

Colossal ionic conductivity was recently discovered in YSZ/SrTiO3 multilayers and was ex- plained in terms of strain and interface-enhanced disorder of the O sublattice. In the present paper we use a combination of scanning transmission electron microscopy and electron energy loss spectroscopy (EELS) and theoretical EELS simulations to confirm the presence of a disordered YSZ O sublattice in coherent YSZ/SrTiO3 multilayers. O K-edge fine structure simulated for the strained disordered O sublattice phase of YSZ possess blurred-out features compared to that of ordered cubic bulk YSZ, and experimental EELS fine structure taken from the strained YSZ of coherent YSZ/SrTiO3 thin films is similarly blurred out. Elemental mapping is shown to be capable of resolving ordered YSZ O sublattices. Elemental mapping of O in the coherent YSZ/STO multilayers is presented in which the O sublattice is seen to be clearly resolved in the STO but blurred out in the YSZ, indicating it to be disordered. In addition, we present imaging and EELS results which show that strained regions exist at the incoherent interfaces of YSZ islands in STO with blurred out fine structure suggesting these incoherent regions may also support high ionic conductivites. Recently, Cavallaro et al. reported electronic conductivities in samples of incoherent disconnected islands embedded in STO that are similar to the islands described herein. The presence of a region of O depleted STO at the interface with incoherent YSZ islands is revealed by EELS elemental mapping, implying the n-type doping of STO/YSZ nanocomposites with disconnected incoherent YSZ islands.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Can we see tau-Flavour Violation at the LHC?

We study the conditions required for chi{sub 2}->chi+tau{sup +}-mu{sup +}- decays to yield observable tau flavour violation at the LHC, for cosmologically interesting values of the neutralino relic density.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

See-through amorphous silicon solar cells with selectively transparent and conducting photonic crystal back reflectors for building integrated photovoltaics

Thin semi-transparent hydrogenated amorphous silicon (a-Si:H) solar cells with selectively transparent and conducting photonic crystal (STCPC) back-reflectors are demonstrated. Short circuit current density of a 135 nm thick a-Si:H cell with a given STCPC back-reflector is enhanced by as much as 23% in comparison to a reference cell with an ITO film functioning as its rear contact. Concurrently, solar irradiance of 295 W/m{sup 2} and illuminance of 3480 lux are transmitted through the cell with a given STCPC back reflector under AM1.5 Global tilt illumination, indicating its utility as a source of space heating and lighting, respectively, in building integrated photovoltaic applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Will new horizons see dust clumps in the Edgeworth-Kuiper Belt?

Debris disks are thought to be sculptured by neighboring planets. The same is true for the Edgeworth-Kuiper debris disk, yet no direct observational evidence for signatures of giant planets in the Kuiper Belt dust distribution has been found so far. Here we model the dust distribution in the outer solar system to reproduce the dust impact rates onto the dust detector on board the New Horizons spacecraft measured so far and to predict the rates during the Neptune orbit traverse. To this end, we take a realistic distribution of trans-Neptunian objects to launch a sufficient number of dust grains of different sizes and follow their orbits by including radiation pressure, Poynting-Robertson and stellar wind drag, as well as the perturbations of four giant planets. In a subsequent statistical analysis, we calculate number densities and lifetimes of the dust grains in order to simulate a collisional cascade. In contrast to the previous work, our model not only considers collisional elimination of particles but also includes production of finer debris. We find that particles captured in the 3:2 resonance with Neptune build clumps that are not removed by collisions, because the depleting effect of collisions is counteracted by production of smaller fragments. Our model successfully reproduces the dust impact rates measured by New Horizons out to ≈23 AU and predicts an increase of the impact rate of about a factor of two or three around the Neptune orbit crossing. This result is robust with respect to the variation of the vaguely known number of dust-producing scattered disk objects, collisional outcomes, and the dust properties.

79 ASTRONOMY AND ASTROPHYSICS↗

SEEING THE COLLISION OF A SUPERNOVA WITH ITS COMPANION STAR

The progenitors of Type Ia and some core collapse supernovae are thought to be stars in binary systems, but little direct observational evidence exists to confirm the hypothesis. We show that the collision of the supernova ejecta with its companion star should produce detectable emission in the hours and days following the explosion. The interaction occurs at distances approx10{sup 11}-10{sup 13} cm and shocks the impacting supernova debris, dissipating kinetic energy and re-heating the gas. Initially, some radiation may escape promptly through the evacuated region of the shadowcone, producing a bright X-ray (0.1-2 keV) burst lasting minutes to hours with luminosity L approx 10{sup 44} ergs s{sup -1}. Continuing radiative diffusion from deeper layers of shock-heated ejecta produces a longer lasting optical/UV emission, which exceeds the radioactively powered luminosity of the supernova for the first few days after the explosion. These signatures are prominent for viewing angles looking down upon the shocked region, or about 10% of the time. The properties of the emission provide a straightforward measure of the separation distance between the stars and hence (assuming Roche lobe overflow) the companion's radius. Current optical and UV data sets likely already constrain red giant companions. By systematically acquiring early time data for many supernovae, it may eventually be possible to empirically determine how the parameters of the progenitor system influence the outcome of the explosion.

79 ASTRONOMY AND ASTROPHYSICS↗

Seeing red in M32: Constraints on the stellar content from near- and mid-infrared observations and applications for studies of more distant galaxies {sup ,} {sup ,}

The properties of asymptotic giant branch (AGB) stars in the Local Group galaxy M32 are investigated using ground- and space-based observations that span the 1-8 μm wavelength interval, with the goal of demonstrating the utility of infrared observations as probes of stellar content. Comparisons with isochrones indicate that the brightest resolved stars in M32 have ages of a few gigayears and are younger on average than AGB stars with the same intrinsic brightness in the outer disk of M31. Accounting for stellar variability is shown to be essential for modeling AGB luminosity functions (LFs). Model LFs that assume the star-forming history measured by Monachesi et al. and the variability properties of Galactic AGB stars match both the K and [5.8] LFs of M32. Models also suggest that the slope of the [5.8] LF between M{sub [5.8]} = –8.5 and –10.0 is sensitive to the mix of stellar ages, and a sizeable fraction of the stars in M32 must have an age older than 7 Gyr in order to match the [5.8] LF. The structural properties of M32 in the infrared are also investigated. The effective radii that are computed from near-infrared and mid-infrared isophotes are similar to those measured at visible wavelengths, suggesting that the stellar content of M32 is well mixed. However, isophotes at radii >16'' (>60 pc) in the near- and mid-infrared are flatter than those at visible wavelengths. The coefficient of the fourth-order cosine term in the Fourier expansion of isophotes changes from 'boxy' values at r < 16'' to 'disky' values at r > 48''in [3.6] and [4.5]. The mid-infrared colors near the center of M32 do not vary systematically with radius, providing evidence of a well mixed stellar content in this part of the galaxy.

79 ASTRONOMY AND ASTROPHYSICS↗

Seeing the forest for the trees: implementing dynamic representation of forest management and forest carbon in a long-term global multisector model

Abstract Studies have found that understanding forest management is critical in understanding the interaction between the carbon cycle and the integrated human-Earth system. This makes effectively representing forest management decisions such as planting and harvesting important. Here, we implement a novel dynamic forest harvest model in a global state of the art multi-sector dynamics model, namely the Global Change Analysis Model (GCAM). We implement an approach that explicitly tracks forest age and generates rotation ages for forest harvest that are responsive to changes in wood prices, changes in forest age and regional preferences for forest rotation. Furthermore, the forest sector in GCAM competes for investment with other land use types in the future years based on expected profit. Our baseline scenario results indicate that with the new forest harvest model, the current global wood product demand in GCAM can be met with minimal loss of old growth forest through the age-based harvest decisions. We find that economic pressure for deforestation and consequent loss of forest carbon is a bigger driver of global forest change than wood harvests, especially in developing regions. Under alternative scenarios where an economic value is placed on carbon across the terrestrial and energy systems, while there is an increase in forest plantations, there can be corresponding decreases in forest cover in some regions as forest land competes with land for bio-energy crops. When the carbon in forests is assigned a price, we find that the average rotation age for wood harvests can be reduced across regions to harvest forests in a more carbon efficient manner.

54 ENVIRONMENTAL SCIENCES↗

OBSERVATIONS OF A TWO-STAGE SOLAR ERUPTIVE EVENT (SEE): EVIDENCE FOR SECONDARY HEATING

We present RHESSI, SDO/AIA, SOHO/LASCO, STEREO, and GOES observations of a partially occulted solar eruptive event that occurred at the southwest limb on 2011 March 8. The GOES X-ray light curve shows two peaks separated by almost 2 hr that we interpret as two stages of a single event associated with the delayed eruption of a coronal mass ejection (CME). A hot flux rope formed during the first stage and continued expanding and rising throughout the event. The speed of the flux rope decreased from {approx}120 to 14 km s{sup -1} during the decay phase of the first stage and increased again during the second stage to become the CME with a speed of {approx}516 km s{sup -1}. RHESSI and GOES data analyses show that the plasma temperature reached over 20 MK in the first stage, then decreased to {approx}10 MK and increased to 15 MK in the second stage. This event provides clear evidence for a secondary heating phase. The enhanced EUV and X-ray emission came from the high corona ({approx}60 arcsec above the limb) in the second stage, {approx}40 arcsec higher than the site of the initial flare emission. STEREO-A on-disk observations indicate that the post-flare loops during this stage were of larger scale sizes and spatially distinct from those in the first stage.

79 ASTRONOMY AND ASTROPHYSICS↗

SEEING THE FIRST SUPERNOVAE AT THE EDGE OF THE UNIVERSE WITH JWST

The first stars ended the cosmic dark ages and created the first heavy elements necessary for the formation of planets and life. The properties of these stars remain uncertain, and it may be decades before individual Population III (Pop III) stars are directly observed. Their masses, however, can be inferred from their supernova explosions, which may soon be found in both deep-field surveys by the James Webb Space Telescope (JWST) and in all-sky surveys by the Wide Field Infrared Survey Telescope (WFIRST). We have performed radiation hydrodynamical simulations of the near-infrared signals of Pop III pair-instability supernovae in realistic circumstellar environments with Lyman absorption by the neutral intergalactic medium. We find that JWST and WFIRST will detect these explosions out to z {approx} 30 and 20, respectively, unveiling the first generation of stars in the universe.

79 ASTRONOMY AND ASTROPHYSICS↗

Dear microtubule, I see you

This essay summarizes my personal journey toward the atomic visualization of microtubules and a mechanistic understanding of how these amazing polymers work. During this journey, I have been witness and partaker in the blooming of a technique I love—cryo-electron microscopy.

59 BASIC BIOLOGICAL SCIENCES↗

Nothing to see here: failed supernovae are faint or rare

ABSTRACT The absence of Type IIP core-collapse supernovae arising from progenitors above 17 solar masses suggests the existence of another evolutionary path by which massive stars end their lives. The direct collapse of a stellar core to a black hole without the production of a bright, explosive transient is expected to produce a long-lived, dim, red transient known as a failed supernova. Despite the detection of a number of candidates for disappearing massive stars in recent years, conclusive observational evidence for failed supernovae remains elusive. A custom-built pipeline designed for the detection of faint transients is used to re-analyse 10 yr of observations of 231 nearby galaxies from the PTF/ZTF surveys. This analysis recovers known supernovae, and yields a number of interesting transients. However, none of these are consistent with a failed supernova. Through Monte Carlo tests the recovery efficiency of our pipeline is quantified. By assuming failed supernovae occur as a Poissonian process with zero detections in the data set, 95 per cent upper limits to the rate of failed supernovae are calculated as a function of failed supernova absolute magnitude. We estimate failed supernovae to be less than 0.61, 0.33, 0.26, or 0.23 of the core-collapse SN rate for absolute magnitudes of −11, −12, −13, and −14, respectively. Finally, we show that if they exist, the Vera C. Rubin Observatory will find 1.7–3.7 failed SNe per year for an absolute bolometric luminosity of ∼6 × 1039 erg s−1 out to distances of 33–43 Mpc, depending on their assumed spectral energy distribution.

Byrne, R. A. (ORCID:0000000177661737)↗