Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Resistance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

Study of coatings for improved fire and decay resistance of mine timbers

The purpose of this program was to find a fire- and rot-retardant polymer/fungicide reaction product for coating mine timbers. Fire-retardant polymers were screened as films and coatings on fir wood. Curable polyimide appeared to be flame retardant and evolved a minimum of fumes when exposed to a flame. Several organic and metal, low toxicity, fungicides were reacted with the polyimide in-situ on the wood. These coated samples were screened for fungus resistance. All formulations rated well - even the polyimide film without additives was fungicidal. The fir wood control itself resisted internal damage during the ten weeks of fungus exposure. A more severe test for fungus resistance will be required.

Baum, B.↗
NASA NTRS1976

Basic aspects of superalloy design for crack growth resistance

It is pointed out that the major difficulty concerning an understanding of the flaw growth resistance properties of superalloys is related to the lack of basic theories. An attempt is made to develop these theories, taking into account their use for the identification of tentative alloy design guidelines for flaw growth resistance. A brief review of the fatigue crack growth literature is provided. Attention is given to continuous fatigue crack growth theory, threshold fatigue crack growth, planar slip superalloy fatigue crack growth, and aspects of creep crack growth resistance.

Tien, J. K.↗
NASA NTRS1978

An exact derivation of contact resistance to planar devices

A mixed boundary-value problem is formulated for an imperfect rectangular contact to a semiconducting sheet (layer). An exact model for derivation of contact resistance is developed and its solution by conformal mapping and eigenfunction expansion is presented. The expression for contact resistance is similar to that for a perfect (lossless) contact but includes an additional term containing the lowest-order coefficient in the infinite series expansion of the complex potential function. The calculated contact resistances are compared with those obtained from three approximate models: lossless contact, transmission line, and extended transmission line models. The extended transmission line model appears to be a very satisfactory approximation provided the ratio of contact length to sheet thickness is no less than 0.5.

Schuldt, S. B.↗
NASA NTRS1975

Approaches to flame resistant polymeric materials

Four research and development areas are considered for further exploration in the quest of more flame-resistant polymeric materials. It is suggested that improvements in phenolphthalein polycarbonate processability may be gained through linear free energy relationship correlations. Looped functionality in the backbone of a polymer leads to both improved thermal resistance and increased solubility. The guidelines used in the pyrolytic carbon production constitute a good starting point for the development of improved flame-resistant materials. Numerous organic reactions requiring high temperatures and the techniques of protected functionality and latent functionality constitute the third area for exploration. Finally, some well-known organic reactions are suggested for the formation of polymers that were not made before.

Liepins, R.↗
NASA NTRS1978

Development of aircraft lavatory compartments with improved fire resistance characteristics

The Boeing's participation in a NASA-funded program (FIREMEN) included developing materials for use as lavatory wall panels, sidewall panels, and ceiling panels possessing flammability, smoke, and toxicity (FS&T) characteristics superior to current materials of construction is described. A sandwich panel system is developed for improving FS&T characteristics and acceptable cost, processing requirements, aesthetic qualities, abrasion resistance, strain resistance, scuff resistance, and washability.

Anderson, R. A.↗
NASA NTRS1979

Study of high resistance inorganic coatings on graphite fibers

Coatings made of boron, silicon carbide, silica, and silica-like materials were studied to determine their ability to increase resistance of graphite fibers. The most promising results were attained by chemical vapor depositing silicon carbide on graphite fiber followed by oxidation, and drawing graphite fiber through ethyl silicate followed by appropriate heat treatments. In the silicon carbide coating studies, no degradation of the graphite fibers was observed and resistance values as high as three orders of magnitude higher than that of the uncoated fiber was attained. The strength of a composite fabricated from the coated fiber had a strength which compared favorably with those of composites prepared from uncoated fiber. For the silica-like coated fiber prepared by drawing the graphite fiber through an ethyl silicate solution followed by heating, coated fiber resistances about an order of magnitude greater than that of the uncoated fiber were attained. Composites prepared using these fibers had flexural strengths comparable with those prepared using uncoated fibers, but the shear strengths were lower.

Galasso, F. S.↗
NASA NTRS1979

Development and fabrication of low ON resistance high current vertical VMOS power FETs

The design of a VMOS Power FET exhibiting low ON resistance, high current as well as high breakdown voltage and fast switching speeds is described. The design which is based on a 1st-order device model, features a novel polysilicon-gate structure and fieldplated groove termination to achieve high packing density and high breakdown voltage, respectively. One test chip, named VNTKI, can block 180 V at an ON resistence of 2.5 ohm. A 150 mil x 200 mil (.19 sq cm) experimental chip has demonstrated a breakdown voltage of 200v, an ON resistance of 0.12 ohm, a switching time of less than 100 ns, and a pulse drain - current of 50 A with 10 V gate drive.

Kay, S.↗
NASA NTRS1979

Coherent anomalous resistivity in the region of electrostatic shocks

Anomalous resistivity in a phase-coherent electrostatic ion cyclotron wave in the region of the auroral electrostatic shocks observed by the S3-3 satellite is considered. It is shown that current-driven shocks and anomalous resistivity will be most important above 5,000 km, where the electron drift velocity is maximized and parallel electric fields are possible. A model for the parallel field based on the dissipation of an Alfven wave pulse by current-driven electrostatic ion cyclotron turbulence is presented. In the model, coherent electrostatic ion cyclotron waves lead to anomalous resistivity by electron trapping, producing parallel electric fields greater than 1 mV/m, and may set up the parallel populations necessary to support oblique electrostatic shocks.

Lysak, R. L.↗
NASA NTRS1979

The energetics of resistive magnetic tearing

A new treatment of the energetics of resistive magnetic tearing is presented. This instability is the only known field-reconnection mechanism which develops in time, and is thus a primary candidate for a number of astrophysical 'flare' processes occurring in stressed magnetic fields. The tearing process is elucidated by a subdivision into magnetic regions of different characteristics: first, as dominated by resistive or highly conductive dynamics, and then by function as a source or sink of the energy flux. Matching conditions between these zones provide a determination of the growth rate and its physical-parameter dependence. The observable plasma energy outputs, due mainly to two distinct magnetically driven acceleration mechanisms, are estimated and their directive spatial properties shown. Finally, the generality of resistive tearing is demonstrated by an application of the previous considerations to realistic sheared-field configurations, including the case of a solar coronal loop, for which flare-instability thresholds and energy-deposition sites are described.

Van Hoven, G.↗
NASA NTRS1979

Mechanical properties and oxidation and corrosion resistance of reduced-chromium 304 stainless steel alloys

An experimental program was undertaken to identify effective substitutes for part of the Cr in 304 stainless steel as a method of conserving the strategic element Cr. Although special emphasis was placed on tensile properties, oxidation and corrosion resistance were also examined. Results indicate that over the temperature range of -196 C to 540 C the yield stress of experimental austenitic alloys with only 12 percent Cr compare favorably with the 18 percent Cr in 304 stainless steel. Oxidation resistance and in most cases corrosion resistance for the experimental alloys were comparable to the commercial alloy. Effective substitutes for Cr included Al, Mo, Si, Ti, and V, while Ni and Mn contents were increased to maintain an austenitic structure.

Stephens, J. R.↗
NASA NTRS1980

Significance of thermal contact resistance in two-layer thermal-barrier-coated turbine vanes

The importance of thermal contact resistance between layers in heat transfer through two layer, plasma sprayed, thermal barrier coatings applied to turbine vanes was investigated. Results obtained with a system of NiCrAlY bond and yttria stabilized zirconia ceramic show that thermal contact resistance between layers is negligible. These results also verified other studies which showed that thermal contact resistance is negligible for a different coating system of NiCr bond calcia stabilized zirconia ceramic. The zirconia stabilized ceramic thermal conductivity data scatter presented in the literature is ?20 to -10 percent about a curve fit of the data. More accurate predictions of heat transfer and metal wall temperatures are obtained when the thermal conductivity values are used at the ?20 percent level.

Liebert, C. H.↗
NASA NTRS1979

An investigation of thermal resistance in single- and multiple-cell GaAs MESFETs

Thermal resistances among FETs of a variable number of gates in parallel are compared. Although the thermal resistance per cell for multiple cells is higher, the total thermal resistance is still low because all the cells are parallel to one another. This implies that the multiple-cell structure is capable of dissipating more power than the single-cell structure and therefore of being used as a power FET.

Wang, Y.-C.↗
NASA NTRS1979

Wetland flow resistance determination using Landsat data

In the past, one value of the roughness coefficient has frequently been used to represent the flow resistance characteristics of an entire natural wetland throughout the year. To improve the simulation of water flow through these natural vegetation communities, Landsat imagery and in situ flow measurements were combined to produce a more detailed representation of flow resistance. The vegetation in a typical marshland drainage basin in south Florida was classified into five categories using Landsat data. Flow measurements were then performed at characteristic sites in the basin. The measurements were taken at various depths during months of significant flow to examine the effect of seasonal growth. This information was then combined with the areal distribution of the vegetation as measured by satellite to more accurately simulate resistance to water flow in a natural marshland drainage basin.

Gervin, J. C.↗
NASA NTRS1982

Resistance Heater Helps Stirling-Engine Research

Stirling engine heater head consists of 18 double-turn coils of tubing, each of which is tightly wrapped with resistance-heating element, through which working gas flows. Coils form a toroid about periphery of heater-head body. With new resistance heater, total circuit resistance can be selected independently of tube geometry by changing size of wires and/or number of wire wraps around each tube.

Hoehn, F. W.↗
NASA NTRS1981

Method for applying photographic resists to otherwise incompatible substrates

A method for applying photographic resists to otherwise incompatible substrates, such as a baking enamel paint surface, is described wherein the uncured enamel paint surface is coated with a non-curing lacquer which is, in turn, coated with a partially cured lacquer. The non-curing lacquer adheres to the enamel and a photo resist material satisfactorily adheres to the partially cured lacquer. Once normal photo etching techniques are employed the lacquer coats can be easily removed from the enamel leaving the photo etched image. In the case of edge lighted instrument panels, a coat of uncured enamel is placed over the cured enamel followed by the lacquer coats and the photo resists which is exposed and developed. Once the etched uncured enamel is cured, the lacquer coats are removed leaving an etched panel.

Fuhr, W.↗
NASA NTRS1980

On the resistive diffusion of force-free magnetic fields

Reid and Laing (1979) conjectured on the general behavior of resistive force-free magnetic fields in a slab model following a numerical study. However, the basic properties of resistive force-free magnetic fields had been established previously. Some results from the previous work are extended to show that the conjecture of Reid and Laing is incorrect. A general analytic treatment of the problem provides the correct physical properties that Reid and Laing were unable to deduce from their numerical solutions. A criticism is also given of the results presented in another numerical study treating cylindrical resistive force-free magnetic fields, by the same authors.

Low, B. C.↗
NASA NTRS1981

Fast plasma heating by anomalous and inertial resistivity effects in the solar atmosphere

A simple model is presented to describe fast plasma heating by anomalous and inertial resistivity effects. It is noted that a small fraction of the plasma contains strong currents that run parallel to the magnetic field and are driven by an exponentiating electric field. The anomalous character of the current dissipation derives from the excitation of electrostatic ion-cyclotron and/or ion-acoustic waves. The possible role of resistivity deriving from geometrical effects ('inertial resistivity') is also considered. Using a marginal stability analysis, equations for the average electron and ion temperatures are derived and numerically solved. No loss mechanisms are taken into account. The evolution of the plasma is described as a path in the drift velocity diagram, where the drift velocity is plotted as a function of the electron to ion temperature ratio.

Duijveman, A.↗
NASA NTRS1981

A technique for improved assessment of flow resistance characteristics of natural wetlands using Landsat data

In the past, one value of the roughness coefficient has frequently been used to represent the flow resistance characteristics of the entire natural wetland throughout the year. To improve the simulation of water flow through these natural vegetation communities, Landsat imagery and in situ flow measurements could be combined to produce a more detailed representation of flow resistance. The vegetation in a typical marshland drainage basin in south Florida was classified into five major categories using Landsat data. Flow measurements were then performed at characteristic sites in the basin. The measurements were taken at various depths during months of significant flow to examine the effect of seasonal growth. This information can be compared with the areal extent of the vegetation measured by satellite to more accurately simulate resistance to water flow in natural marshland drainage basins.

Gervin, J. C.↗