Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “REPROCESSING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Glutarimidedioxime: A Complexing and Reducing Reagent for Plutonium Recovery from Spent Nuclear Fuel Reprocessing

Abstract Efficient separation processes for recovering uranium and plutonium from spent nuclear fuel are essential to the development of advanced nuclear fuel cycles. The performance characteristics of a new salt‐free complexing and reducing reagent, glutarimidedioxime (H 2 A), are reported for recovering plutonium in a PUREX process. With a phase ratio of organic to aqueous of up to 10:1, plutonium can be effectively stripped from 30 % tributyl phosphate (TBP) in kerosene into 1 m HNO 3 with H 2 A. The complexation‐reduction mechanism is illustrated with the combination of UV/Vis absorption spectra and the crystal structure of a Pu IV complex with the reagent. The fast stripping rate and the high efficiency for stripping Pu IV , through the complexation‐reduction mechanism, is suitable for use in centrifugal contactors with very short contact/resident times, thereby offering significant advantages over conventional processes.

Xian, Liang↗

Use of CAP88 PC to infer differences in the chemical form of I-129 emitted from a fuel reprocessing facility

Emissions of 129I from nuclear fuel separations conducted at the Hanford Site in Washington State have been occurring since the 1940’s. Fuel separation on the Hanford Site stopped in 1988, but emissions of 129I have continued as venting of the building occurred. In this study, atmospheric measurements of 129I concentrations were coupled with an EPA approved plume dispersion model (CAP-88PC) to evaluate the effectiveness of the dispersion model for estimating ambient concentrations at the Hanford Site. This evaluation led to the hypothesis of different chemical forms of iodine being emitted over the years; this hypothesis was developed as an explanation for the model agreeing with measurements over some time periods, but not over all time periods. The model was then run with modified emissions to simulate the short atmospheric half-life of the suspected reactive chemical form of iodine being emitted. This modification resulted in good agreement between the modeled and measured concentrations over the entire 20 year study period, and provided evidence that the hypothesis of a reactive form of iodine being emitted was correct.

Fritz, Brad G.↗

Glass waste form options for rare-earth fission products from electrochemical reprocessing

Herein, we describe a first-of-a-kind study where lead tellurite (Pb-Te-O), iron phosphate (Fe-P-O), and lanthanide aluminoborosilicate (LABS) waste forms are evaluated for treating and/or immobilizing waste streams containing high rare-earth (RE) content, e.g., RECl 3 , REOCl, and/or REO x . Results from this study show that NdOCl can be immobilized in 78TeO 2 -22PbO glass at up to 10 mass%. Higher loadings of up to 15 mass% were demonstrated, but with a small fraction of crystallization. Two Fe-P-O glasses produced from either RECl 3 (RE = Nd,Ce) or NdOCl revealed products with very similar properties, demonstrating that the phosphate process can be used to chlorinate a variety of RE-containing waste streams. Two LABS glasses produced from Nd 2 O 3 or NdOCl showed similar properties, but the LABS-NdOCl glass did have some residual Cl present. Characterization is provided for all waste forms including chemical analysis, X-ray diffraction, and bulk density.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigation of molybdate melts as an alternative method of reprocessing used nuclear fuel

Here, an investigation of molybdate melts containing sodium molybdate (Na 2 MoO 4 ) and molybdenum trioxide (MoO 3 ) to achieve the separation of uranium from fission products by crystallization has been performed. The separation is based on the difference in solubility of the fission product metal oxides compared to the uranium oxide or molybdate in the molybdate melt. The molybdate melt dissolves uranium dioxide at high temperatures, and upon cooling, uranium precipitates as uranium dioxide or molybdate, whereas the fission product metals remain soluble in the melt. Small-scale experiments using gram quantities of uranium dioxide have been performed to investigate the feasibility of UO 2 purification from the fission products. The composition of the uranium precipitate as well as data for partitioning of several fission product surrogates between the uranium precipitate and molybdate melt for various melt compositions are presented and discussed. The fission products Cs, Sr, Ru and Rh all displayed very large distribution ratios. The fission products Zr, Pd, and the lanthanides also displayed good distribution ratios (D > 10). A melt consisting of 20 wt% MoO 3 -50 wt% Na 2 MoO 4 -30 wt% UO 2 heated to 1313 K and cooled to 1123 K for the physical separation of the UO 2 product from the melt, and washed once with Na 2 MoO 4 displays optimum conditions for separation of the UO 2 from the fission products.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Promising Method of Sm–Co Magnet Reprocessing in Alkali Chloride Melts

Developing new, efficient methods for samarium and cobalt recovery from scraps/rejects and swarf at Sm–Co magnet manufacturing sites during shaping and finishing is an important task in terms of meeting their growing demand. In this work, the reaction of oxygen with a solution of samarium and cobalt chlorides in a LiCl–KCl eutectic melt was studied at 400–600 °C to explore possible methods for the separation and recovery of samarium and cobalt from these waste products. The pyrochemical reaction resulted in the formation and precipitation of samarium oxychloride, while the cobalt remained in the melt in a soluble chloride form. The effect of temperature and the amount of oxygen passed through the melt (oxygen-to-samarium molar ratio) on the course of the reaction were studied. Kinetic parameters of the oxygen with samarium chloride reaction were determined.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Metal-Organic Frameworks for Removal of Xe and Kr from Nuclear Fuel Reprocessing Plants

Removal of Xenon (Xe) and Krypton (Kr) from in parts per million (ppm) levels were demonstrated for the first time using two well known metal-organic frameworks (MOFs), HKUST-1 and Ni/DOBDC. Results of an activated carbon were also included for comparison. Ni/DOBDC has higher Xe/Kr selectivities than those of the activated carbon. Moreover, results show that the Ni/DOBDC and HKUST-1 can selectively adsorb Xe and Kr from air even at 1000 ppm concentration. This shows a promising future for MOFs in a radioactive nuclides separation from spent fuel.

activated carbon↗

Relativistic pair beams from TeV blazars: A source of reprocessed GeV emission rather than intergalactic heating

The interaction of TeV photons from blazars with the extragalactic background light produces a relativistic beam of electron-positron pairs streaming through the intergalactic medium (IGM). The fate of the beam energy is uncertain. By means of two- and three-dimensional particle-in-cell simulations, we study the nonlinear evolution of dilute ultra-relativistic pair beams propagating through the IGM. We explore a wide range of beam Lorentz factors γ {sub b} >> 1 and beam-to-plasma density ratios α << 1, so that our results can be extrapolated to the extreme parameters of blazar-induced beams (γ {sub b} ∼ 10{sup 6} and α ∼ 10{sup –15}, for powerful blazars). For cold beams, we show that the oblique instability governs the early stages of evolution, but its exponential growth terminates—due to self-heating of the beam in the transverse direction—when only a negligible fraction ∼(α/γ {sub b}){sup 1/3} ∼ 10{sup –7} of the beam energy has been transferred to the IGM plasma. Further relaxation of the beam proceeds through quasi-longitudinal modes, until the momentum dispersion in the direction of propagation saturates at Δp {sub b,} {sub ∥}/γ{sub b} m{sub e}c ∼ 0.2. This corresponds to a fraction ∼10% of the beam energy—irrespective of γ {sub b} or α—being ultimately transferred to the IGM plasma (as compared to the heating efficiency of ∼50% predicted by one-dimensional models, which cannot properly account for the transverse broadening of the beam). For the warm beams generated by TeV blazars, the development of the longitudinal relaxation is suppressed, since the initial dispersion in beam momentum is already Δp {sub b0,} {sub ∥}/γ {sub b} m{sub e}c ≳ 1. Here, the fraction of beam energy ultimately deposited into the IGM is only ∼α γ {sub b} ∼ 10{sup –9}. It follows that most of the beam energy is still available to power the GeV emission produced by inverse Compton up-scattering of the cosmic microwave background by the beam pairs.

79 ASTRONOMY AND ASTROPHYSICS↗