Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RADIOCHEMISTRY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

The distinct conditions of atmospheric and underground nuclear tests revealed by Zn isotopic compositions of nuclear debris samples

We analyzed the Zn isotopic compositions of nuclear debris samples from atmospheric and underground nuclear tests. Samples from the site of atmospheric tests exhibit a range of Zn isotopic fractionation (δ 66 Zn JMC-Lyon = 0.23–0.86 ‰) while samples from underground tests exhibit Zn isotopic compositions with minimal variation among samples and from terrestrial igneous rock standards (δ 66 ZnJMC-Lyon = 0.28–0.39 ‰). In conclusion, the larger range of δ 66 Zn JMC-Lyon observed in atmospheric test samples relative to underground test samples is likely the result of the open system characteristics of atmospheric nuclear tests and the closed system characteristics of underground nuclear tests.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2024

Uptake of arsenic and selenium on iron-doped Pb resin

We report the uptake of the radioisotopes 73 As and 75 Se was characterized on Fe 3+ -doped Pb resin (Eichrom Technologies) from pH 1 to 12. There is good uptake of arsenic and selenium over a wide pH range (~ 1 to 10) with a decrease only at high pH (~ 12). Column experiments were performed to demonstrate the separations of these elements from solutions with near neutral pH values (~ 6 to 8) with high yields and high radiopurity. These separations may be relevant for a wide variety of applications especially isotope harvesting research.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2024

Effects of uranium metal carbon content on hydriding kinetics and corrosion blister number/area at sub-ambient pressures

Carbon is a common impurity in uranium metal, resulting in a number of uranium–carbon inclusion phases that contribute to an increase in metal defect density as carbon content increases. It is widely held that uranium hydride corrosion preferentially nucleates at these defect sites, and that an increase in carbon content will therefore represents an increase in uranium hydride corrosion sites on the metal surface. We hydrided six uranium sources with differing carbon contents to explore whether this assumption holds in a sub-ambient (~ 0.1 atm hydrogen), sealed environment, and report the resulting reaction kinetics and uranium hydride blister benchmarking data. We find that carbon content is not strongly correlated with reaction kinetics terms or the resulting hydride blister number and area, but that there is a tight relationship between corrosion blister number/area and kinetics as is expected. Further, we find that there is a strong trend of decreasing variance in the blister number, blister area, and induction time as carbon content increases (higher carbon content results in more reproducible blister populations). Additionally, we find a narrow band of uranium metal consumption at the end of the parabolic phase of reaction progress (beginning of linear growth phase) of 0.098 ± 0.011 w/w%, a fact that may be useful in assaying hydrogen corrosion of uranium metal within sealed environments generally.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2024

Investigation of candidates for reactor produced radioactive materials in support of radiological training exercises

Bromine-82, Potassium-42 and Copper-64 have been successfully adopted as radioactive surrogates for outdoor large area contamination training. The goal of this project was to discover new materials that could supplement potassium bromide (KBr) and copper pellets in radiological dispersal device (RDD) training events to reduce the down time of the training fields and to broaden the toolbox of the RDD surrogate training event program at Idaho National Laboratory. Of the ten different materials investigated, sodium nitrite, gallium metal, and gallium oxide presented the greatest promise as potential materials to replace potassium bromide in RDD training events.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2024

Evaluation of SR/ TEVA/ TRU triple stack for separation of activation products

A rapid method to separate Ta, Po, Au, Pt, and W from a sample containing mixed fission and activation products was developed using three commercially available extraction chromatography resins stacked in series. When the separation was tested using all the target activation products, even those with short half-lives were measurable. Finally, combining multiple extraction chromatography resin cartridges in tandem allows for multiple short-lived activation products to be separated from one sample addition without the complication of multiple steps.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2024

Extraction of 88 Y, 152 Eu, 228 Ac, 241 Am, and 244 Cm with 2-thenoyltrifluoroacetone (TTA) resin

In this report the behavior of 88 Y, 152 Eu, 228 Ac, 241 Am, and 244 Cm was studied with 2-thenoyltrifluoroacetone resin with batch uptake, kinetics and column studies. Studies were performed in acetate buffer solutions (pH ~ 2 to ~ 6) and there was high uptake of all isotopes, except 228 Ac, at pH > 4.5. The kinetics of uptake were reasonable, although slower for the actinides, and sufficient for column studies. The retention of 88 Y, 152 Eu, and 241 Am on the resin in column studies was demonstrated as well as a reasonable separation of these isotopes from 228 Ac.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2024

Uptake behavior of 73 As, 75 Se, 197m Hg, 212 Pb and 210 Po on Eichrom pre-filter resin from HCl and HNO 3

We report the extraction of 73 As, 75 Se, 197 mHg, 212 Pb and 210 Po on Eichrom pre-filter resin was studied in HCl and HNO 3 with batch uptake, kinetic and column experiments. There was significant extraction of mercury in HNO 3 and HCl, and polonium and selenium in HCl. The kinetics are sufficient to allow for retention on pre-filter columns, and separations of 73 As from 75 Se and 197 mHg, and 212 Pb from 210 Po are demonstrated. This retention is important for the development of chemical separations as pre-filter resin is commonly used alongside extraction chromatography resins but its potential for uptake of metal ions is not well characterized.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2024

Simple separation of technetium from molybdenum for tracer isotope production

A procedure for the separation of technetium isotopes from bulk molybdenum was developed in nitric acid media. After irradiation of nat Mo foils, and dissolution in H 2 O 2 , the solution is acidified to 2 M HNO 3 , and anion exchange resin is used to separate technetium from molybdenum. The procedure is simple, requiring only basic laboratory equipment and, with a two-column separation, the technetium yield is high (~ 85%) with extremely high purity (< 0.1 ppm nat Mo). In conclusion, this is ideally suited for laboratory production of technetium tracer isotopes, particularly 95m Tc.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2024

The LLNL rabbit: determination of trace element levels in polyethylene

Rabbit facilities are systems that pneumatically transport a sample carrier (known as a rabbit) to and from a radiation source. However, trace impurities in the polyethylene (PE) rabbit may interfere with measurements of short-lived isotopes. Activated impurities with short half-lives as 28 Al interfere with the fission product γ-ray, therefore the rabbit cannot be measured immediately. Neutron activation analysis was performed on various PE samples obtained from different manufacturers and the highest quality PE was used to fabricate a high-purity PE rabbit. Here, the impurities identified in the PE study were 27 Al, 48 Ca, 37 Cl, 50 Cr, 65 Cu, 127 I, 26 Mg, 55 Mn, and 30 Si.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2024

Fractionation of UF6 and daughter progeny in storage cylinders from external heating

Abstract Uranium hexafluoride (UF 6 ) is a significant concern for material accountancy and verification in the international safeguards community. Verification of the contents of UF 6 cylinders is generally attempted with gamma spectroscopy but the current methods assume a uniform, homogeneous UF 6 mass distribution within the cylinder. In this work, it was found experimentally and confirmed via modeling, that under an external heat load (the sun), the UF 6 and its daughter products undergo fractionation in the cylinder. This fractionation of the UF 6 and daughter products can cause an errant measurement of the enrichment of the cylinder when using the current verification methods.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2025

A heat and mass transfer model for evaluation of damaged cesium chloride radiological sources

Radiological sources are vital to many applications, and typically contain byproducts from waste streams which decay over time to form complex mixtures of elements. Daughter products resulting from these decay processes can introduce complicating factors to the integrity and safety of the vessel that contains the radiological material. Sources containing cesium 137 ( 137 Cs) are of particular interest, because the decay of this isotope produces barium metal which reacts readily and exothermically with oxygen. This work employs physics-based numerical tools to examine the thermal response of a radiological source containing a mixture of cesium and barium in the event that vessel walls are damaged and atmospheric gases contact source material. A parametric study was conducted to determine the sensitivity of the response to various factors, including vessel geometry, source material age, the degree of vessel damage, and other parameters. Here, it was found that the peak temperatures that occurred within the source material strongly depend on these parameters, particularly vessel geometry and age, which determine whether a breach would be a relatively minor accident or a catastrophic incident. Finally, the model’s sensitivity to uncertain thermophysical properties is discussed.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2025

Field deployable trace radioisotope analysis through combined electrochemical and alpha spectroscopy methods

A method for depositing actinides directly onto a 4H-SiC Schottky barrier diode (SBD) detector as a field deployable actinides sensor was developed to enable off-site analysis, shortening the time to obtain critical information such as elements, concentration, and/or isotopic ratio related to the radiological situation. A thin film of Hg was first electrodeposited onto the Pt contact of the SiC diode, followed by chronoamperometric deposition of microgram levels of actinides under conventional control conditions. The 4H-SiC diode maintained consistent functionality through the electrodeposition process and showed resolved alpha-energy spectra that contained accurate isotopic information demonstrating the feasibility of a combined chemical and radiological sensor for field actinide detection and quantification.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2025

Comparison of microprecipitation methods for polonium source preparation for alpha spectrometry

Detection of radioactive isotopes of polonium is important for understanding natural processes, management and assessment of radioactive waste, and nuclear forensics applications. Further, the most common methods for preparation of polonium samples for alpha spectrometry are electrodeposition and spontaneous deposition which are time consuming. Here, we compare three approaches utilizing rapid microprecipitation from bismuth phosphate, copper sulfide, or tellurium alongside traditional spontaneous deposition methods. From these experiments, results show that copper sulfide microprecipitation recoveries are similar to spontaneous deposition on silver and less time consuming with an approximate five-fold decrease in preparation time, including in the presence of complex matrices like seawater.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2025

Biofilm growth in water-cooling towers as collection platforms for airborne radionuclides

Given its history of nuclear material processing, the Savannah River Site (SRS) was used to evaluate whether biofilms growing in water-cooling towers (WCTs) are effective passive collection platforms for environmental radionuclide surveillance. Uranium and plutonium analyses suggest that WCT-sourced biofilms are efficient, indigenous, constantly running samplers that can be used for environmental monitoring, as their isotopic compositions are distinct from atmospheric fallout and representative of SRS historical activities. Further, the ubiquity of WCTs worldwide and demonstrated ability to detect nuclear material processing and constrain specific activities based on biofilm actinide isotopic compositions make WCT biofilms a promising means to improve monitoring.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2025

Model ages of three uranium metal CRMs and implications for radiochronometry data interpretation

In this study, we report 230 Th/ 234 U and 231 Pa/ 235 U model ages in three uranium metal certified reference materials with distinct production histories and isotopic compositions ranging from depleted to highly enriched (CRMs 112-A, 115, and 116-A). Here, our results provide the first model age values for these materials using multiple radiochronometers, which can be used as reference values for quality control of radiochronometry measurements performed during nuclear forensic investigations. Furthermore, we evaluate the model ages in the context of available production records for the materials, which provides insight into the processes that may impact radiochronometry systems during uranium metal production.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2025

Single particle trace element analysis of uranium oxide standards with laser-induced breakdown spectroscopy

Femtosecond Laser-Induced Breakdown Spectroscopy (LIBS) was used to analyze over 1000 individual particles of uranium oxide trace element standard CRM124. Intra-granular analysis showed elemental concentrations were consistent across different surface locations on each uranium grain. However, inter-granular comparison revealed large heterogeneity between different grains of the same sample. By comparing the distribution of elemental concentrations across the particle populations, we were able to correctly identify a manufacturing process involving wet chemistry, rather than a dry mixing of two powders to give an overall chemical average. In conclusion, this demonstrates the utility of LIBS as a large-scale single particle analysis tool for nuclear forensics.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Photonuclear production of 225 Ac from 226 Ra targets

Herein we report proof of principal production of 225 Ac via 226 Ra(γ , n) 225 Ra $\overset{^-β}{\rightarrow}$ 225 Ac and subsequent chemical separation via extraction chromatography using BDGA and Ln resins. Irradiation of 0.35 µg 226 Ra with 39 MeV bremsstrahlung end-point energy photons produced 225 Ra and 224 Ra at a rate of 754 and 2215 kBq/g 226 Ra/mA/h, respectively. The production rate of 225 Ac determined at its peak radioactivity was 335 kBq/g 226 Ra/mA/h. Radiochemically pure 225 Ac was isolated with a minimum separation factor of 125,000 for 225 Ac: 226 Ra. In conclusion, these results are promising and lay the foundation for future studies to scale-up production for preclinical quantities of high purity 225 Ac using the 226 Ra(γ , n) 225 Ra $\overset{^-β}{\rightarrow}$ 225 Ac approach.

38 - RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCL↗
DOE OSTI2025

Radiochemical transport analysis of gamma spectroscopic data to support estimation of molten salt reactor off-gas inventories

This work introduces a novel application of radiochronometry to estimate nuclide inventories in molten salt reactor off-gas systems based on gamma spectroscopic data from the Molten Salt Reactor Experiment. By analyzing isotopic, isobaric, and isomeric activity ratios, key depletion model parameters related to species transport within the reactor system could be inferred. The findings demonstrate the potential of leveraging a limited subset of gamma spectroscopy measurements to accurately estimate nuclide inventories throughout the off-gas system. The approach can be useful in reactor design activities and support analyses relevant to operations, safety, security, and safeguards.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗