SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Presentation at Produced Water Society Conference 2024. National Energy Water Treatment & Speciation (NEWTS): A Water & Critical Mineral Database and Dashboard.
The In Situ Resource Utilization (ISRU) project has been developing technologies to produce oxygen from lunar regolith to provide consumables to a lunar outpost. The processes developed reduce metal oxides in the regolith to produce water, which is then electrolyzed to produce oxygen. Hydrochloic and hydrofluoric acids are byproducts of the reduction processes, as halide minerals are also reduced at oxide reduction conditions. Because of the stringent water quality requirements for electrolysis, there is a need for a contaminant removal process. The Contaminant Removal from Oxygen Production Systems (CROPS) team has been developing a separation process to remove these contaminants in the gas and liquid phase that eliminates the need for consumables. CROPS has been using Nafion, a highly water selective polymeric proton exchange membrane, to recover pure water from the contaminated solution. Membrane thickness, product stream flow rate, and acid solution temperature and concentration were varied with the goal of maximizing water permeation and acid rejection. The results show that water permeation increases with increasing solution temperature and product stream flow rate, while acid rejection increases with decreasing solution temperature and concentration. Thinner membranes allowed for higher water flux and acid rejection than thicker ones. These results were used in the development of the hardware built for the most recent Mars ISRU demonstration project.
Alongside the rising global water demand, continued stress on current water supplies has sparked interest in using nontraditional source waters for energy, agriculture, industry, and domestic needs. Membrane technologies have emerged as one of the most promising approaches to achieve water security, but implementation of membrane processes for increasingly complex waters remains a challenge. The technical feasibility of membrane processes replacing conventional treatment of alternative water supplies (e.g., wastewater, seawater, and produced water) is considered in the context of typical and emerging water quality goals. This review considers the effectiveness of current technologies (both conventional and membrane based), as well as the potential for recent advancements in membrane research to achieve these water quality goals. We envision the future of water treatment to integrate advanced membranes (e.g., mixed-matrix membranes, block copolymers) into smart treatment trains that achieve several goals, including fit-for-purpose water generation, resource recovery, and energy conservation.
Overview and How-to Tutorial Videos for Using NEWTS Data Video 1: Overview of NEWTS Database Video 2: How-to tutorial for EPA Flue Gas Desulfurization (FGD) Effluent NEWTS dataset Video 3: How-to tutorial for USGS Produced Waters NEWTS dataset Video 4: How-to tutorial for EPA Ash NEWTS dataset Video 5: How-to tutorial for Quillinan, et al 2018 DOE Geothermal Technology Office REE dataset Video 6: Tutorial video on navigating the NEWTS Dashboard, with an overview of NEWTS and navigating between the NEWTS Dashboard and Datasets (https://netl-doe.maps.arcgis.com/apps/dashboards/a5fa4192f7c6478dab3d6180d9c30b84) Video 7: Additional tutorial video on navigating the NEWTS Dashboard and investigating specific data points in the Dashboard and Datasets Video 8: Re-record of recent webinar giving an overview of the NEWTS Database and Dashboard, including interacting with the NEWTS Dashboard, locating specific data points, and finding the relevant streams in the NEWTS Database and datasets on EDX. Includes overview of the datasets, case studies, and steps for taking stream data from the database and modeling stream data in OLI Studio and Geochemist's Workbench. Note: Video 3 tutorial is also applicable to the USGS Brackish Water NEWTS dataset.
This report provides a best-estimate evaluation of residual water content (post-dry out) in the High Burnup (HBU) LWR Spent Fuel Demonstration project TN-32 cask, and evaluates the radiolysis of the residual free water, and the physisorbed and chemisorbed waters on the surfaces of the fuel and cask internal contents. The evaluation of radiolytic breakdown of those waters with gamma radiation causing the generation of hydrogen gas (H 2 ) is made using available literature data and models. This evaluation is part of the overall materials performance evaluation of the SNF-in-canister system, and is part of the technical bases for their continued safe dry storage. The TN-32 cask contents included 32 HBU LWR spent fuel assemblies each with 264 fuel rods clad in zirconium alloys, aluminum neutron absorber components, and aluminum and stainless steel structural components. The residual free and surface (physisorbed/chemisorbed) waters are ascribed to water vapor in the free volume and to components’ surfaces, respectively. The total potential radiolytic hydrogen inventory from the water vapor and from waters ascribed to surfaces has been calculated assuming all the water produced molecular H 2 . The residual water that is chemically incorporated into the bulk of a hydrated oxide, i.e., chemisorbed water, and its total potential hydrogen inventory has been calculated. These calculations are at the physical limit of material available and are used for a bounding assessment purpose only.
The Reverse Water Gas Shift (RWGS) process can produce water and ultimately oxygen through electrolysis. This technology is being investigated for possible use in the exploration of Mars as well as a potential process to aid in the regeneration of oxygen from carbon dioxide. The initial part of this report summarizes the results obtained from operation of the RWGS process at Kennedy Space Center during May and June of this year. It has been demonstrated that close to complete conversion can be achieved with the RWGS process under certain operating conditions. The report also presents results obtained through simulation for an alternative staged configuration for RWGS which eliminates the recycle compressor. This configuration looks promising and hence seems worthy of experimental investigation.
Beginning in June of 2010 an environmental mystery was unfolding on the International Space Station (ISS). The U.S. Water Processor Assembly (WPA) began to produce water with increasing levels of total organic carbon (TOC). A surprisingly consistent upward TOC trend was observed through weekly in-flight total organic carbon analyzer (TOCA) monitoring. As TOC is a general organics indicator, return of water archive samples was needed to make better-informed crew health decisions and to aid in WPA troubleshooting. TOCA-measured TOC was more than halfway to its health-based screening limit before archive samples could be returned on Soyuz 22 and analyzed. Although TOC was confirmed to be elevated, somewhat surprisingly, none of the typical target compounds were the source. After some solid detective work, it was confirmed that the TOC was associated with a compound known as dimethylsilanediol (DMSD). DMSD is believed to be a breakdown product of silicon-containing compounds present on ISS. A toxicological limit was set for DMSD and a forward plan developed for operations given this new understanding of the source of the TOC. This required extensive coordination with ISS stakeholders and innovative use of available in-flight and archive monitoring resources. Behind the numbers and scientific detail surrounding this anomaly, there exists a compelling story of multi-disciplinary awareness, teamwork, and important environmental lessons learned.
The National Energy Water Treatment and Speciation (NEWTS) Integrated Dataset v1.0 provides water researchers, community leaders, and regulators with a unified and standardized energy-related wastewater stream database. This resource is derived from 27 state and federal entities, and scientific publications, and contains more than 400,000 sample records, many of which also provide geospatial information. The dataset includes data for several different energy-related wastewater types including produced water, other oil and gas wastewaters, mine drainage, coal ash leachate, and power plant wastewater. The NEWTS Integrated Dataset was built to support environmentally prudent decision-making, explore treatment opportunities, and identify potential critical mineral sources. A subset of this novel resource is also featured on NETL NEWTS State-Level Database Dashboard. Additional data can be found in the NEWTS EDX Group and the NEWTS Federal Database Dashboard.
The search for methanotrophs as plant-growth-promoting rhizobacteria (PGPR) presents an important contribution to mitigating the impact of global warming by restoring the natural soil potential for consuming methane while benefiting plants during droughts. Our in silico simulations suggest that water, produced as a byproduct of methane oxidation, can satisfy the cell growth requirement. In addition to water, methanotrophs can produce metabolites that stimulate plant growth. Considering this, we proposed that applying methanotrophs as PGPR can alleviate the effect of droughts on crops, while stimulating atmospheric methane consumption. In this work, we isolated a series of methanotrophic communities from the rhizospheres of different crops, including Italian sweet pepper and zucchini, using an atmosphere enriched with pure methane gas, to determine their potential for alleviating drought stress in wheat plants. Subsequently, 23 strains of nonmethanotrophic bacteria present in the methanotrophic communities were isolated and characterized. We then analyzed the contribution of the methane-consuming consortia to the improvement of plant growth under drought conditions, showing that some communities contributed to increases in the wheat plants’ lengths and weights, with statistically significant differences according to ANOVA models. Furthermore, we found that the presence of methane gas can further stimulate the plant–microbe interactions, resulting in larger plants and higher drought tolerance.
A total wash water renovation system concept was developed for removing objectionable materials from spacecraft wash water in order to make the water reusable. The breadboard model system described provides for pretreatment with ferric chloride to remove soap by chemical precipitation, carbon adsorption to remove trace dissolved organics, and ion exchange for removal of dissolved salts. The entire system was put into continuous operation and carefully monitored to assess overall efficiency and equipment maintenance problems that could be expected in actual use. In addition, the capacity of the carbon adsorbers and the ion-exchange resin was calculated and taken into consideration in the final evaluation of the system adequacy. The product water produced was well within the Tentative Wash Water Standards with regard to total organic carbon, conductivity, urea content, sodium chloride content, color, odor, and clarity.
This paper describes a hybrid regenerative fuel cell (RFC) system for space application, which is made up of an alkaline fuel cell (Space Shuttle fuel cell) and an acid electrolysis unit (solid polymer electrolyte). In the RFC, gas produced from the acid electrolysis unit and water produced by the alkaline fuel cell are repeatedly reacted in the other unit. The results of RFC's tests indicate that the system is feasible in terms of fluid/unit compatibility. In addition, the fuel cell thermal-control system proved capable of controlling fuel cell temperatures throughout long open-circuit periods. Diagrams of the RFC and its subsystems are included.
Heavy oil reservoirs on Alaska North Slope (ANS) are unconsolidated and contain abundant clay minerals, where the first-ever field pilot is currently implemented to validate the use of polymer floods for heavy oil enhanced oil recovery (EOR). The polymer molecules and/or fine clay particles carried with the produced liquid could potentially affect the oil/water separation, which is one of the major concerns for field operators. This dissertation aims to investigate the emulsification behavior of produced liquid, understand the emulsifying mechanism, and seek an adaptive and cost-effective method to treat the produced liquid from polymer flooding. Emulsions were prepared by mechanically mixing the actual heavy oil and the produced water from the pilot site, of which the stability was investigated by bottle test method or multiple light scattering method. Drop size distribution and interfacial properties were measured via microscope and pendant drop technique to probe the stability mechanism further. Results showed that oil-continuous or water-continuous emulsion could be generated depending on the water cut, clay types, clay concentration, and polymer concentration. In the crude oil/water system, the increasing water cut triggered the phase inversion of oil-continuous emulsion to water-continuous emulsion, resulting in faster separation and lower emulsion stability. Whereas, clay particles, no matter added to the oil or water phase, resulted in an unfavorable phase inversion from the loose water-continuous emulsion to the tight oil-continuous emulsion as clay concentration increased. For all four types of clay except Ca-montmorillonite, clay particles added to water led to an earlier phase inversion and higher emulsion stability than that added to the oil. The dual function of polymer on emulsion stability was observed. On the one hand, both sheared and unsheared polymer tended to convert the oil-continuous emulsion formed in either crude oil/water system or complex crude oil/water/clay particle system to the water-continuous emulsion, acting as a weak demulsifier to accelerate the oil/water separation. On the other hand, the addition of polymer to the water-continuous emulsion could result in enhanced emulsion stability, which is primarily attributed to the increased viscosity of the continuous phase and the decreased drop size of the dispersed oil phase. Particularly, the sheared polymer had a weaker ability to stabilize the o/w emulsion than the unsheared polymer due to the lower viscosity of the sheared polymer solution resulting from the breakdown of the polymer macromolecules. As for the chemical demulsification tests, the performance of demulsifiers showed a complex dependency upon the water cut, the shearing intensity, demulsifier type and dosage, and the polymer concentration. A compound emulsion breaker, E12+E18, exhibited the most satisfactory demulsification performance despite the varied test conditions. For severe water-continuous emulsions that might require a multi-fold dosage of demulsifier, a less expensive electrolyte, KCl, was proposed to be used in combination with demulsifier E12+E18 to improve the demulsification performance. In the proposed demulsifier formula, the effectiveness of the commercial demulsifier relied on its destructive effect on the interfacial film, while the efficacy of KCl was mainly dependent on its viscosity reduction effect on the continuous phase. This dissertation illustrates that intermediate layer elimination and water clarification are the major challenges for produced liquid treatment from polymer flooding. It also provides practical and theoretical guidance in advance for the demulsification strategy of the produced liquid from the ongoing first-ever polymer flooding pilot on ANS.
The National Energy Water Treatment and Speciation (NEWTS) Integrated Dataset v2.0 provides water researchers, community leaders, regulators, and industry stakeholders with a unified and standardized energy-process wastewater chemistry database. This resource is derived from 39 state and federal entities, and scientific publications, and contains more than 700,000 sample records, many of which also provide geospatial information. The dataset includes chemistry data for several different energy-process wastewater types including produced water, other oil and gas wastewaters, mine drainage, coal ash leachate, power plant wastewater, and geothermal fluids. The NEWTS Integrated Dataset was built to support prudent decision-making, characterization of potential critical mineral sources, and modeling of treatment and valorization options. A subset of this novel resource is also featured on the NEWTS State-Level Database Dashboard. Additional data can be found in the NEWTS EDX Group and the NEWTS Federal Database Dashboard.
The surface of Mars once had abundant water flowing on its surface, but now there is a general perception that this surface is completely dry. Several lines of research have shown that there are sources of potentially large quantities of water at many locations on the surface, including regions considered as candidates for future human missions. Traditionally, system designs for these human missions are constrained to tightly recycle water and oxygen, and current resource utilization strategies involve ascent vehicle oxidizer production only. But the assumption of relatively abundant extant water may change this. Several scenarios were constructed to evaluate water requirements for human Mars expeditions to assess the impact to system design if locally produced water is available. Specifically, we have assessed water resources needed for 1) ascent vehicle oxidizer and fuel production, 2) open-loop water and oxygen life support requirements along with more robust usage scenarios, and 3) crew radiation protection augmentation. In this assessment, production techniques and the associated chemistry to transform Martian water and atmosphere into these useful commodities are identified, but production mass and power requirements are left to future analyses. The figure below illustrates the type of water need assessment performed and that will be discussed. There have been several sources of feedstock material discussed in recent literature that could be used to produce these quantities of water. This paper will focus on Mars surface features that resemble glacier-like forms on Earth. Several lines of evidence indicate that some of these features are in fact buried ice, likely remnants from an earlier ice age on Mars. This paper examines techniques and hardware systems used in the polar regions of Earth to access this buried ice and withdraw water from it. These techniques and systems will be described to illustrate options available. A technique known as a Rodriguez Well is assessed as a likely method for extracting water from these bodies of ice. The figure below is a sample of results from this assessment that will be discussed.
A main goal in the field of In Situ Resource Utilization is to develop technologies that produce oxygen from regolith to provide consumables to an extraterrestrial outpost. The processes developed reduce metal oxides in the regolith to produce water, which is then electrolyzed to produce oxygen. Hydrochloric and hydrofluoric acids are byproducts of the reduction processes, which must be removed to meet electrolysis purity standards. We previously characterized Nation, a highly water selective polymeric proton-exchange membrane, as a filtration material to recover pure water from the contaminated solution. While the membranes successfully removed both acid contaminants, the removal efficiency of and water flow rate through the membranes were not sufficient to produce large volumes of electrolysis-grade water. In the present study, we investigated electrodialysis as a potential acid removal technique. Our studies have shown a rapid and significant reduction in chloride and fluoride concentrations in the feed solution, while generating a relatively small volume of concentrated waste water. Electrodialysis has shown significant promise as the primary separation technique in ISRU water purification processes.
A main goal in the field of In Situ Resource Utilization is to develop technologies that produce oxygen from regolith to provide consumables to an extratrrestrial outpost. The processes developed reduce metal oxides in the regolith to produce water, which is then electrolyzed to produce oxygen. Hydrochloric and hydrofluoric acids are byproducts of the reduction processes, which must be removed to meet electrolysis purity standards. We previously characterized Nation, a highly water selective polymeric proton-exchange membrane, as a filtrtion material to recover pure water from the contaminated solution. While the membranes successfully removed both acid contaminants, the removal efficiency of and water flow rate through the membranes were not sufficient to produce large volumes of electrolysis-grade water. In the present study, we investigated electrodialysis as a potential acid removable technique. Our studies have show a rapid and significant reduction in chloride and fluoride concentrations in the feed solution, while generating a relatively small volume of concentrated waste water. Electrodialysis has shown significant promise as the primary separation technique in ISRU water purification processes.
The NEWTS Economic Data Dashboard: Critical Materials for Energy is an economic screening tool for assessing the concentration and potential value of the 18 critical materials for energy in fossil energy-related wastewater across the United States. Datasets used to develop the dashboard and complete economic calculations are available as supplementary downloads. These resources were developed primarily using geochemical composition and volume data from the NEWTS Integrated dataset (version 1.0). Energy-related wastewater types presented in the dashboard include produced water (PW), brackish groundwater (BW), acid mine drainage (AMD), coal combustion residual leachate (CCRL), power plant flue gas desulfurization wastewater (FGD), and geothermal fluids. The concentrations of the following critical minerals were included in the analysis, when available: Al, Co, Cu, Dy, F, Ga, Ge, C, Ir, Li, Mg, Mn, Nd, Ni, Pt, Pr, Si, Tb. This economic screening tool was built to support identification of promising critical mineral feedstocks and economic research targets.
Mineral precipitation within hydraulically fractured shale may affect fluid flow pathways and impact longterm hydrocarbon production. The ability to predict geochemical reactions that lead to problematic mineral precipitation will lead to active reservoir management strategies to improve overall production. Using the Marcellus Shale as a case study, a combination of laboratory experiments and reaction path modeling was applied to determine which reactions are likely to occur upon introduction of hydraulic fracturing fluid into the shale reservoir. Experimental results indicate that contact between fracturing fluid and shale will result in dissolution of primary minerals (quartz, feldspars, kaolinite, chlorite, pyrite) and secondary mineral precipitation over time periods of less than one week. Precipitation of barite, Fe-oxides, feldspars, amorphous silica and clay is likely to occur within the reservoir during shut in and early flowback due to mixing between fracturing fluid and reservoir brine as based on modeling saturation indices using experimental fluid data. Reaction path modeling of the experimental scenarios corroborates the specific dissolution and precipitation reactions observed experimentally. Comparison of the results to injected and produced waters from a Marcellus Shale well pad in Greene County, PA, USA, shows that the mineral reactions occur during the hydraulic fracturing, shut in, and early flowback periods. The results presented in this paper demonstrate the value in applying experimental approaches to identify mineral precipitation/dissolution reactions that may significantly impact reservoir performance. The good agreement between geochemical models and experimental results provides confidence that numerical models can be applied to screen the potential fluid-mineral and fluid-mixing reactions in unconventional reservoirs that result in undesired mineral scale precipitation.