Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Pr”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Mars Surface Habitat Concept Design

An initial Mars Surface Habitat (MSH) concept design study was conducted as part of the National Aeronautics and Space Administration (NASA) Habitation Systems Development Office’s effort to inform NASA crewed Mars architecture decisions. The study assessed the unique challenges, risks, and benefits of a surface habitation element within the Mars architecture trade space. The goal of the study was to identify unique functional capabilities necessary to support a crewed mission on the Martian surface, the unique challenges and risks associated with such an architecture, and the areas of further analysis required to make such a mission possible. Continuing NASA’s development and execution of the Moon to Mars lunar surface missions, attention will continue progressing toward the initial crewed Mars mission. To prepare for this, NASA’s Exploration Systems Development Mission Directorate (ESDMD) has established a strategic analysis cycle (SAC) where an architectural trade space is identified and evaluated. Given that the Mars architecture and mission profile are still in this trade space, the architecture and mission considered for this study is SAC21. In addition, reference conceptual designs are being refined for the Mars Transit Habitat (TH) and MSH systems which will enable crew to safely travel to and inhabit the surface of Mars. The NASA Mars architectures trade space includes the use of a Pressurized Rover (PR) to address both crew habitation and mobility needs. This study assesses the use of a dedicated habitat via the MSH and an unpressurized terrain vehicle for crew mobility and exploration in lieu of the PR. Determining the optimum mission architecture will require continued analysis by ESDMD teams and this study is intended to support of such a study. The MSH concept design team aims to explore this area of the Mars habitation trade space, and in doing so, inform and highlight the considerations associated with a MSH in the surface architecture. It is not the intention of this study to make specific habitation or architecture decisions, but instead to provide a habitation element concept compatible with the Mars architecture trade space.

Mars Surface Habitat↗
NASA NTRSDate not supplied

Mars Surface Habitat (MSH) Concept Design

An initial Mars Surface Habitat (MSH) concept design study was conducted as part of the National Aeronautics and Space Administration (NASA) Habitation Systems Development Office’s effort to inform NASA crewed Mars architecture decisions. The study assessed the unique challenges, risks, and benefits of a surface habitation element within the Mars architecture trade space. The goal of the study was to identify unique functional capabilities necessary to support a crewed mission on the Martian surface, the unique challenges and risks associated with such an architecture, and the areas of further analysis required to make such a mission possible. Continuing NASA’s development and execution of the Moon to Mars lunar surface missions, attention will continue progressing toward the initial crewed Mars mission. To prepare for this, NASA’s Exploration Systems Development Mission Directorate (ESDMD) has established a strategic analysis cycle (SAC) where an architectural trade space is identified and evaluated. Given that the Mars architecture and mission profile are still in this trade space, the architecture and mission considered for this study is SAC21. In addition, reference conceptual designs are being refined for the Mars Transit Habitat (TH) and MSH systems which will enable crew to safely travel to and inhabit the surface of Mars. The NASA Mars architectures trade space includes the use of a Pressurized Rover (PR) to address both crew habitation and mobility needs. This study assesses the use of a dedicated habitat via the MSH and an unpressurized terrain vehicle for crew mobility and exploration in lieu of the PR. Determining the optimum mission architecture will require continued analysis by ESDMD teams and this study is intended to support of such a study. The MSH concept design team aims to explore this area of the Mars habitation trade space, and in doing so, inform and highlight the considerations associated with a MSH in the surface architecture. It is not the intention of this study to make specific habitation or architecture decisions, but instead to provide a habitation element concept compatible with the Mars architecture trade space.

Ryan Hughes↗
NASA NTRS2016

NASA Phase2 Unlimited Rights Final Report Research and Technology for Aerospace Propulsion Systems (RTAPS) Task Order: ERA Advanced Core Compressor Technology Program

As part of the NASA Integrated Systems Research Program (ISRP), Environmentally Responsible Aviation (ERA) Project, NASA GRC and GE Aviation have partnered to investigate the technology barriers associated with improved fuel economy of large gas turbine engines. Crucial to improving fuel economy is the increase in pressure ratio (PR) of the core high pressure compressor (HPC). A key enabler to increasing HPC pressure ratios are new technology front stage airfoil designs that have higher efficiency, higher pressure ratios and improvements in front stage part-power operability. The purpose of this work is to design and test two high pressure ratio, high efficiency front block designs. The baseline design, hereafter referred to as Build 1, is similar to what would be found in a high efficiency 30:1 PR class HPC. A redesigned front block with improved blading will also be tested and hereafter be referred to as Build 2. The goal of Build 2 is to increase stage aero loading (increase stage pressure ratio) beyond Build 1 while maintaining equivalent efficiency and stall margin. The detailed inter-stage and traverse data from the two builds will be used to improve understanding of the complex flow physics at high-speed and part-speed conditions that impact performance and operability. By addressing, understanding and solving the challenges associated with aerodynamic losses and stage matching better design strategies can be incorporated in future core compressors with higher efficiency, thereby enabling improvement in mission fuel burn while still meeting operability requirements.

Axial Compressors↗
NASA NTRS2024

Extravehicular Activity and Human Surface Mobility Program (EHP) Exploration EVA (xEVA) System Compatibility Standards

Extravehicular Activity (EVA) is a significant capability for Artemis Systems which includes Gateway Program (modules), Human Landing System (HLS) Program (Integrated Lander and Human Class Delivery Lander), Lunar Terrain Vehicle (LTV), Pressurized Rover (PR), Payloads, and any other future lunar surface assets that will be utilized for exploration or science. The EVA and Human Surface Mobility Program (EHP) will provide the following: Exploration EVA (xEVA) suits, xEVA tools and crew aids along with vehicle integration/support hardware, LTV, and PR. Being a distributed and dynamic capability (moving components), xEVA System hardware will interface with almost all elements of the Artemis architecture. As such, it is important to document a singular set of EVA compatibility standards at the programmatic level to articulate “how to interface with xEVA suit hardware” and “how to design hardware that EVA crewmembers will access and manipulate.”

Exploration↗
NASA NTRS2013

An Updated TRMM Composite Climatology of Tropical Rainfall and Its Validation

An updated 15-yr Tropical Rainfall Measuring Mission (TRMM) composite climatology (TCC) is presented and evaluated. This climatology is based on a combination of individual rainfall estimates made with data from the primaryTRMMinstruments: theTRMM Microwave Imager (TMI) and the precipitation radar (PR). This combination climatology of passive microwave retrievals, radar-based retrievals, and an algorithm using both instruments simultaneously provides a consensus TRMM-based estimate of mean precipitation. The dispersion of the three estimates, as indicated by the standard deviation sigma among the estimates, is presented as a measure of confidence in the final estimate and as an estimate of the uncertainty thereof. The procedures utilized by the compositing technique, including adjustments and quality-control measures, are described. The results give a mean value of the TCC of 4.3mm day(exp -1) for the deep tropical ocean beltbetween 10 deg N and 10 deg S, with lower values outside that band. In general, the TCC values confirm ocean estimates from the Global Precipitation Climatology Project (GPCP) analysis, which is based on passive microwave results adjusted for sampling by infrared-based estimates. The pattern of uncertainty estimates shown by sigma is seen to be useful to indicate variations in confidence. Examples include differences between the eastern and western portions of the Pacific Ocean and high values in coastal and mountainous areas. Comparison of the TCC values (and the input products) to gauge analyses over land indicates the value of the radar-based estimates (small biases) and the limitations of the passive microwave algorithm (relatively large biases). Comparison with surface gauge information from western Pacific Ocean atolls shows a negative bias (~16%) for all the TRMM products, although the representativeness of the atoll gauges of open-ocean rainfall is still in question.

(GPCP) Global Precipitation Project analysis↗
NASA NTRS1968

Internal low Reynolds number turbulent heat transfer

The results of a semi-analytical and experimental study of adiabatic tube flow and an analytical and experimental investigation of the thermal entrance region for gas flowing through electrically heated circular tubes are presented. Emphasis is placed on the low Reynolds number turbulent flow regime--defined as fully turbulent flow at bulk Reynolds numbers from 3,000 to about 15,000. Adiabatic air velocity and friction data and localized heat transfer measurements for air and helium, at low heating rates, are presented for this range. The adiabatic data were obtained in a 1.61 inch 1D tube for flow at bulk Reynolds numbers from 3,000 to 15,000. A continuous, Reynolds number-dependent, profile is developed from the data by using a modification of Reichardts' wall and middle law eddy diffusivity expressions. The velocity profile satisfies continuity. It is valid for all Reynolds numbers in excess of 3,000 for which the flow is fully turbulent and the Blasius friction factor expression is valid. The thermal entrance problem for a fully developed velocity profile is solved analytically by the method of Sparrow, Hallman, and Siegel. The solution is based on the profile developed from the velocity study. Tabular values of the eigenvalues and normalized Nusselt numbers for gases are presented for it range of Reynolds numbers from 3,000 to 50,000. The axial variation of Nusselt number is found to be correlated by [Nu/Nu_(∞)] = 1 + 0.8 (1+ 70,000 Re^(-3/2)) ((x/D)^(-1)) to within ± 5 per cent for x/D ≥2. The fully developed value agrees with the Dittus - Boelter correlation, Nu_(∞) = 0.021 Re^(0.8) Pr^(0.4) For the eigenvalues, λ^(2)_(n), and the associated constants, A_(n), correlations of the form λ^(2)_(n) =A_(1,n) Re^(-b_(1,n) + C_(1,n) Re^(-d_(1,n)) A_(n) = -A_(2,n) Re^(-b_(2,n) + C_(2,n) Re^(-d_(2,n)) are obtained. The coefficients and powers are presented in tabular form. Heat transfer data are presented, primarily for helium, for the low Reynolds number turbulent range. A one-quarter inch, resistively heated, vertical, circular tube was used for the study. The data cover an axial range from 1.2 to 96 diameters; wall-to-bulk temperature ratios vary from 1 to 1.4. In the low Reynolds number turbulent regime, these data clearly support the present analytical solution rather than the prediction obtained by applying the eddy diffusivity distribution used by Sparrow, Hallman, and Siegel.

Harold C. Reynolds, Jr.↗
NASA NTRS1973

Lightweight tire concept for space shuttle

Various tests were conducted on a 49x17/26 PR aircraft tire that had been designed as a lightweight tire for use on the C-5A military transport. This tire is approximately 25 per cent lighter than a tire of the same size and ply rating that would be used in commercial airline service. The tires were tested at 40 per cent, 37 per cent, and 35 per cent deflections. These deflections were obtained by adjusting the inflation pressure while the load on the tire remained constant at 60,000 pounds. It was determined that the tire would operate successfully under the test conditions at 35% deflection. Prior to testing, the tires were subjected to conditions of high vacuum and low temperature. It was determined that the tires were not adversely affected by these conditions.

Shufflebotham, W. T.↗
NASA NTRS1973

Studies of beta Coronae Borealis. II - Identification of the lanthanides

A table presented contains the identification of Ce III (Sugar 1965), Pr III (Sugar 1961), Nd III (Crosswhite 1972), Sm III (Crosswhite 1969), Ho II, and Yb II (Corliss and Tech 1972) lines. The tolerance for identifications was 0.04 A. Each of these ionic identifications is based primarily on only a few of the lines listed while the remaining lines which are normally blended add support.

Adelman, S. J.↗
NASA NTRS1974

Vectorcardiographic results from Skylab medical experiment M092: Lower body negative pressure

Vectorcardiograms were recorded via a modified Frank lead system from all crewmen of the three Skylab missions in conjuction with the Lower Body Negative Pressure - M092 Experiment. Data were analyzed by a specially developed computer program (VECTAN). Design of the test sequences allowed direct comparisons of supine resting, Earth based (reference) vectorcardiograms with those taken during lower body negative pressure stress and those obtained at rest in orbit, as well as combinations of these conditions. Results revealed several statistically significant space flight related changes; namely, increased testing and lower body negative pressure stressed heart rates, modestly increased PR interval and corrected QTC interval, and greatly increased P and QPS loop maximal amplitudes. In addition, orientation changes in the QRS maximum vector and the J-vector at rest in space seem quite consistent among crewmen and different from those caused by the application of lower body negative pressure. No clinical abnormalities were observed. Etiology of these findings is conjectured to be, at least in part, related to fluid mass shifts occurring in weightlessness and attendant alterations in cardiovascular dynamics and myocardial autonomic control mechanisms.

Hoffler, G. W.↗
NASA NTRS1976

Preliminary Evaluation of a Turbine/Rotary Combustion Compound Engine for a Subsonic Transport

The fuel consumption of a modern compound engine with that of an advanced high pressure ratio turbofan was compared. The compound engine was derived from a turbofan engine by replacing the combustor with a rotary combustion (RC) engine. A number of boost pressure ratios and compression ratios were examined. Cooling of the RC engine was accomplished by heat exchanging to the fan duct. Performance was estimated with an Otto-cycle for two levels of energy lost to cooling. The effects of added complexity on cost and maintainability were not examined and the comparison was solely in terms of cruise performance and weight. Assuming a 25 percent Otto-cycle cooling loss (representative of current experience), the best compound engine gave a 1.2 percent improvement in cruise. Engine weight increased by 23 percent. For a 10 percent Otto-cycle cooling loss (representing advanced insulation/high temperature materials technology), a compound engine with a boost PR of 10 and a compression ratio of 10 gave an 8.1 percent lower cruise than the reference turbofan.

Civinskas, K. C.↗
NASA NTRS1976

Further development of high temperature-resistant graphite fiber coupling agents

Potential coupling agents for graphite fibers were screened by their effect on the weight losses of Thornel 300, HMS, and HTS fibers at 588K for 200 and 400 hours. Unidirectional laminates were made from HMS and HTS fibers, untreated, and treated with each of the seven coupling agents. The matrix of all laminates was PMR polyimide (PMR-PR). On the basis of the best overall retention of elevated temperature interlaminar shear strength after 200 hours at 588K, composite weight after 200 hours at 588K, and fiber weight after 400 hours at 588K, ventromer T-1 applied from aqueous solution and pyrolyzed PPQ were selected for further evaluation as coupling agents for HTS fiber while ventromer T-2 and pyrolyzed PPQ were selected as coupling agents for HMS fiber. It was shown that pyrolyzed PPQ as a coupling agent improves the oxidative stability of HTS/PMR-PI composites.

Griffin, R. N.↗
NASA NTRS1977

An integrated theory for predicting the hydrothermomechanical response of advanced composite structural components

A theory is developed for predicting the hydrothermomechanical response of advanced composite structural components. The combined hydrothermal effects on the mechanical properties of unidirectional composites loaded along the material axis and off-axis, and of angleplied laminates are also evaluated. The materials investigated consist of neat PR-288 epoxy matrix resin and an AS-type graphite fiber/PR-288 resin unidirectional composite.

Chamis, C. C.↗
NASA NTRS1979

X-ray emission from the region of gamma 195 plus 5

X-ray emission from the vicinity of the MeV gamma ray source, gamma 195+5, was observed with the HEAO-A2 detectors. A source with an intensity of (1.5 + pr - 0.5) x 10 to the -11th power erg/sq cm s (2-6 keV) was seen in each of two separate observations at a combined confidence level of 3.1 sigma. The location of the source is l2 = 194.56 degrees, b2 = 4.92 degrees with a 90% confidence error box of 1.4 square degrees, significantly smaller than the positional uncertainty of the gamma ray source, and consistent with its location. The chance overlap of such an X-ray source with the gamma ray region is estimated to be 9% and, therefore, they may be 9% and therefore they may be associated. The spectrum appears too steep to extrapolate simply to the 100 MeV flux value for gamma 195+5.

Worrall, D. M.↗