Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Polyethylene”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Effect of Microstructure of High Density Polyethylene on Catalytic Degradation: A Comparison Between Nano Clay and FCC

The effect of microstructure of high density polyethylene (HDPE) on catalytic degradation over fluid catalytic cracking (FCC) catalyst and Nano clay is investigated. An ethylene/1-hexene copolymer (HDPE) was fractionated based on 1-hexene content to different fractions using preparative temperature rising elution fractionation (P-TREF) method. The short chain branch (SCB) content of each fraction calculated based on {sup 1}H NMR results. The homogenous SCB content fractions were subsequently analyzed using TGA and thermal degradation behavior of samples were compared with catalytic degradation. The results showed that FCC, in contrast to nano clay, is more sensitive to microstructure of HDPE during catalytic degradation. Therefore, linear chains can start degradation sooner on FCC than the branched chains. In comparison of nano clay and FCC it was found that the nano clay, reduces temperature at maximum degradation rate (T{sub max}), but FCC reduces the T{sub 5%} and T{sub max} significantly.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fiber from DDGS and Corn Grain as Alternative Fillers in Polymer Composites with High Density Polyethylene from Bio-based and Petroleum Sources

The steady increase in production of corn based ethanol fuel has dramatically increased the supply of its major co-product known as distiller’s dried grain with solubles (DDGS). Large amount of DDGS and corn flour are used as an animal feed. The elusieve process can separate DDGS or corn flour into two fractions: DDGS fraction with enhanced protein and oil content or corn flour fraction with high starch content, and hull fiber. This study investigated the feasibility of using fiber from DDGS and corn grain as alternative fillers to wood fiber in high density polyethylene (HDPE) composites made with two different sources of polymers. Two fiber loading rates of 30 and 50% were evaluated for fiber from DDGS, corn, and oak wood (control) to assess changes in various physical and mechanical properties of the composite materials. Two HDPE polymers, a bio-based HDPE made from sugarcane (Braskem), and a petroleum based HDPE (Marlex) were also compared as substrates. The biobased polymer composites with DDGS and corn fibers showed significantly lower water absorption than the Marlex composite samples. The Braskem composite with 30% DDGS fiber loading showed the highest impact resistance (80 J/m) among all the samples. The flexural properties showed no significant difference between the two HDPE composites.

36 MATERIALS SCIENCE↗

Transfer of Graphene CVD to Surface of Low Density Polyethylene (LDPE) and Poly(butylene adipate-co-terephthalate) (PBAT) Films: Effect on Biodegradation Process

Here, the influence of graphene as a coating on the biodegradation process for two different polymers is investigated, poly(butylene adipate-co-terephthalate) (PBAT) (biodegradable) and low-density polyethylene (LDPE) (non-biodegradable). Chemical vapor deposition graphene was transferred to the surface of two types of polymers using the Direct Dry Transfer technique. Polymer films, coated and uncoated with graphene, were buried in a maturated soil for up to 180 days. The films were analyzed before and after exposure to microorganisms in order to obtain information about the integrity of the graphene (Raman Spectroscopy), the biodegradation mechanism of the polymer (molecular weight and loss of weight), and surface changes of the films (atomic force microscopy and contact angle). The results prove that the graphene coating acted as a material to control the biodegradation process the PBAT underwent, while the LDPE covered by graphene only had changes in the surface properties of the film due to the accumulation of solid particles. Polymer films coated with graphene may allow the production of a material that can control the microbiological degradation, opening new possibilities in biodegradable polymer packaging. Regarding the possibility of graphene functionalization, the coating can also be selective for specific microorganisms attached to the surface.

36 MATERIALS SCIENCE↗

Biological Recycling of Polyethylene Terephthalate: A Mini-Review

Plastics have become an inseparable part of our life in the society due to their merits such as low cost, light weight, good mechanical and thermal properties along with easy process ability. Since the last few decades, the unrestrained use of plastics in various fields like agriculture, packaging, transportation has raised a serious issue about its disposal and pollution. An efficient decomposition of plastics takes about 1000 years. Not only there is an increase in the problem of waste disposal of plastics but also they release CO{sub 2} and dioxins on burning which contributes to cause pollution. There is a growing concern for use of efficient microorganisms meant for biodegradation of non-degradable synthetic polymer because conventionally used methods for plastic disposal are ineffective for plastic waste management. This review paper focuses on one such type of plastic-polyethylene terephthalate (PET) which is widely used in a flexible packaging application, its manufacturing process and the various effects of waste generated by it on the surrounding environment. This review discusses an overview of various existing plastic disposal methods along with their limitations and mechanism of biodegradation of PET and factors affecting biodegradation.

54 ENVIRONMENTAL SCIENCES↗

Microcellular Foaming Behaviors of Poly (Lactic Acid)/Low-Density Polyethylene Blends Induced by Compatibilization Effect

A facile methodology for improving the crystallization ability, rheological properties and microcellular foaming behaviors of poly (lactic acid)/low-density polyethylene (PLA/LDPE) blends through compatibilization was proposed. Poly (ethylene octene) grafted with glycidyl methacrylate (GPOE) as reactive compatibilizer was introduced into PLA/LDPE blends and the resultant PLA/LDPE/GPOE blends were foamed by supercritical CO{sub 2}. Torque curves and Fourier transformation infrared spectroscopy results confirmed that GPOE reacted with PLA successfully. The crystallization ability and rheological properties of PLA was promoted obviously by the addition of LDPE and GPOE. The size of LDPE dispersion phase in PLA/LDPE blends decreased from 4.4 ± 0.1 to 1.2 ± 0.1 µm, owing to the compatibility effect. When the content of GPOE reach 8 phr, microcellular structure appeared in the PLA/LDPE/GPOE blending foam. An interesting flower-like cellular structure was observed in PLA/LDPE/GPOE blending foams, with the foaming temperature at 85 and 90 °C. Finally, the microcellular foaming mechanism for various PLA foams was proposed and clarified using schematic diagram.

36 MATERIALS SCIENCE↗

Tuning Sugarcane Bagasse Biochar into a Potential Carbon Black Substitute for Polyethylene Composites

One of the most used carbonaceous materials by industry are carbon blacks, which have technological applications in polymeric composites, coatings and paints, electric and electrochemical devices. One drawback is that they are produced from fossil fuels. Although biochars are also carbonaceous materials some disadvantages like their larger particles size, high ash content and highly oxygenated surface must be overcome to enable their use as substitute of carbon blacks in composites. Sugarcane bagasse biochar was used to produce carbonaceous materials to substitute carbon blacks. Milling of biochar decreased particle size from several hundreds of micrometers to 100–500 nm and narrowed its size distribution. Chemical leaching reduced the inorganic compounds and ash content by almost 20%. Great advance was achieved when biochar was thermally annealed in alcohol vapor atmosphere which resulted in biochar-based material with very low oxygenated carbon species at particles surface and turned them hydrophobic. Almost no C–O/C=O and O–C=O peaks components were observed at the X-ray photoelectron spectroscopy spectrum. Reactive thermal annealing of the biochar based additive was a key procedure to obtain polyethylene composites (5% loading) with mechanical, thermal and colorimetric properties very close to the ones prepared with the carbon black from fossil fuels.

36 MATERIALS SCIENCE↗

Compatibility of mesophase pitch and linear low-density polyethylene for low-cost carbon fiber

Mesophase pitch and linear low-density polyethylene (LLDPE) were blended by shear mixing and extruded producing precursor fibers which were then converted to carbon fibers (CFs). LLDPE additives agglomerate within the isotropic spheres rather than uniformly dispersing throughout the entire matrix. The blends possess different thermal properties and precursor tensile properties evident by two-phase tensile stress nature not present in precursor fibers produced from pure pitch. The resultant CFs were oxidized at 280 °C for 4 h and carbonized at 1000 °C for 15 min. This process created pitch CFs with a tensile strength of 1.23 GPa and a Young’s modulus of 99 GPa. All CFs produced from blends of pitch and LLDPE possessed a tensile strength of 0.63 GPa and less. These CFs showed a microstructure slightly different from the pure pitch CFs with fractured CF cross sections revealing voids present in all blended CFs due to burnt off LLDPE stemming from carbonization. Further study into compatibilizers and new conversion processes is required to successfully blend LLDPE with mesophase pitch for the purpose of producing a new low-cost CF.

36 MATERIALS SCIENCE↗

New titanium(IV) coordination compounds with 2-hydroxybenzyl alcohol derivatives used in the preparation of ultra-high molecular weight polyethylene

A reaction of 2,4-bis(α,α-dimethylbenzyl)phenol with TiCl{sub 2}(ОPr{sup i})2 and Ti(ОPr{sup i}){sub 4} was used to obtain the coordination compounds (HL){sub 2}L{sub 2}Ti{sub 2}Cl{sub 2}•MeC{sub 6}H{sub 5} and L{sub 4}Ti{sub 4}(OPr{sup i}){sub 8}, respectively. The compounds were characterized by elemental analysis, NMR spectroscopy, and X-ray diffraction. The titanium(IV) coordination compounds obtained polymerize ethylene in the presence of binary cocatalysts {3Et_2AlCl + Bu_2Mg} or {3Et_3Al_2Cl_3 + Bu_2Mg} at moderate to high rates, giving rise to ultra-high molecular weight polyethylene with a wide range of molecular masses. The highest values of tensile strength (2.4 GPa) and modulus of elasticity (ε = 2.67%) were obtained for the sample with a molecular mass of 3.14•10{sup 6} Da under comparable conditions of orientation drawing of the film filaments. This sample was obtained when complex (HL)2L{sub 2}Ti{sub 2}Cl{sub 2} was activated by a 3: 1 mixture of Et{sub 2}AlCl—Bu{sub 2}Mg.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Conducting properties of nanocomposite polymer electrolytes based on polyethylene glycol diacrylate and SiO{sub 2} nanoparticles at the interface with a lithium electrode

Nanocomposite polymer electrolytes based on polyethylene glycol diacrylate and 1 M LiBF{sub 4} solution in γ-butyrolactone with addition of SiO{sub 2} nanoparticles were synthesized and studied. Resistance measurement at the Li/electrolyte and Li/nanocomposite electrolyte interface by the time-resolved electrochemical impedance showed its significant decrease in the presence of SiO{sub 2} nanoparticles. Charge-discharge cycling of prototypes of Li/LiFePO{sub 4} batteries for 50 cycles also showed the advantage of using nanocomposite polymer electrolytes over electrolytes without SiO{sub 2} additives.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effect of Carbon Fiber Surface Modification on the Mechanical Properties of Carbon-Fiber-Reinforced Ultrahigh-Molecular-Weight Polyethylene Composite

In this paper, the surface properties and morphologies of the concentrated nitric acid (HNO{sub 3})-modified carbon fiber (CF) were characterized by XPS, SEM, and contact angle goniometer, respectively. The results showed that both the oxygen-containing functional groups content and the surface roughness of concentrated HNO{sub 3}-modified CF significantly increased. The contact angle of concentrated HNO{sub 3}-modified CF was obviously lower than that of unmodified CF. Studies on the mechanical properties of carbon-fiber-reinforced ultrahigh-molecular-weight polyethylene (CF/UHMWPE) composite revealed that the stress–strain behavior gradually changed from nonlinear to linear relationship with the rise of CF content in UHMWPE matrix. Both the tensile strength and modulus increased with the rise of CF content. Conversely, as the CF content in UHMWPE matrix is increasing, the flexural strength and modulus increased first and then decreased. The flexural strength and modulus of CF/UHMWPE composite with 30 wt.% CF content reached the maximum value of 157.61 MPa and 9.82 GPa, respectively. Moreover, the CF surface modification and CF content have a synergistic effect on the tensile and flexural mechanical properties of the CF/UHMWPE composite. The influence of CF modification on the tensile and flexural mechanical properties of the composite became more and more obvious with the rise of CF content.

36 MATERIALS SCIENCE↗

Effect of reaction media on hydrogenolysis of polyethylene plastic waste: Polymer-surface interactions in small alkane/polymer blends

The polymer reaction media and its properties can be altered by recycling a fraction of liquid products or adding alkane solvents. Less clear is whether this strategy affects hydrogenolysis. Herein, we investigated the effect of short-chain alkanes C n consisting of n carbons (n=8, 16, and 32) on the upcycling of high-density polyethylene (HDPE) plastic waste to lubricant-range products over Ru/TiO 2 catalysts by multiscale simulations and experiments. First, we trained a force field for polymer/surface interactions on a Ru 22 nanoparticle (NP) supported on TiO 2 . Using replica exchange molecular dynamics simulations, we studied the effect of small hydrocarbons on the adsorption of a surrogate polymer, C 142 , on the catalyst. We found segregation of long chains (C 142 ) at the catalyst surface due to the enthalpy gained by adsorbing more C-C bonds of the long chains, compensating for entropic losses upon adsorption. Short-chain molecules decrease the adsorbed carbons of long chains on the Ru NP due to blocking Ru active sites. Compared to the bulk chains, competitive adsorption results in a broader, heavy-tailed distribution of end-to-end distance of adsorbed chains. Our experiments demonstrated that catalyst activity declines significantly beyond simple dilution due to changes in polymer adsorption, and tuning the reaction media by creating suitable blends impacts hydrogenolysis. Density distributions for a 50:50%wt mixture of PP and PE show that PE chains are segregated at the surface, so they are prone to C-C bond breaking much faster than PP chains. H/D exchange experiments show preferential deuteration of PE, while CH 3 groups of PP remain undeuterated. Furthermore, this may be explained by the preferential sorption of PE over PP, leading to specific distribution in the polymer blend.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Insights into co-pyrolysis of polyethylene terephthalate and polyamide 6 mixture through experiments, kinetic modeling and machine learning

The non-isothermal pyrolysis of polyethylene terephthalate (PET), polyamide 6 (PA6), and their mixtures was studied in a thermogravimetric analyzer at different heating rates. Temperature of maximum decomposition (T max ) decreased by 25–45 °C and 35–55 °C for the PET:PA6 mixtures (3:1, 1:1, 1:3) compared to PET and PA6, respectively. The kinetic analysis was initially carried out using isoconversional method. However, the dependency of activation energy on conversion was observed for the co-pyrolysis of PET and PA6 that suggested the occurrence of multi-step reactions in the mixtures. Distributed activation energy model (DAEM) was used in this study to describe the multistep reactions occurring during pyrolysis of PET:PA6 mixtures. Here, in this work, a four-parallel reaction DAEM was developed to describe the pyrolysis kinetics of PET:PA6 mixtures. The apparent mean activation energies (E o ) for PET, PA6, and mixtures varied in the range of 244–255, 140–215, and 138–255 kJ mol –1 , respectively. The mass loss profiles of PET and PA6 mixtures were also modeled using artificial neural network (ANN). Out of 155 ANN models, the best prediction was made by ANN511 with R 2 greater than 0.997 for both test and unseen data. The interaction effects observed through TGA experiments and subsequent kinetic analysis were further assessed in terms of product composition using analytical pyrolysis coupled with gas chromatograph/mass spectrometer (Py-GC/MS). Co-pyrolysis of PET and PA6 resulted in the formation of new aromatic compounds with nitrogen-containing functional groups, which were not detected when PET or PA6 were pyrolyzed individually.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Catalytic conversion of post-consumer recycled high-density polyethylene oil over Zn-impregnated ZSM-5 catalysts

The catalytic conversion of post-consumer recycled high-density polyethylene (PCR-HDPE) pyrolysis oil was investigated using modified ZSM-5 zeolites, prepared under different conditions. The PCR-HDPE oil, obtained through pyrolysis at 500 °C followed by distillation at 165 °C, contained a naphtha fraction hydrocarbons suitable for catalytic upgrading. H/ZSM-5 converts PCR-HDPE naphtha fraction oil primarily into BTX, along with light paraffins and olefins. Introducing mesoporosity led to increased propylene yield at the expense of BTX. Zn impregnation onto H/ZSM-5 and H-meso/ZSM-5 enhanced BTX yield by up to 13 %. However, Zn-meso/ZSM-5 exhibited a lower BTX yield than Zn/ZSM-5 with the same Zn loadings, especially after additional steam treatment at 700 °C. Spent catalysts revealed no noticeable increase in metal contaminants such as calcium and aluminum that were present in the PCR-HDPE. Here, the Zn/ZSM-5 catalyst was stable for more than 50 h time on stream and showed promising potential for upgrading PCR-HDPE naphtha fraction oils.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigating the Role of Acid Sites in the Hydrocracking of Polyethylene-EVOH Multilayer Film Waste over Pt/BEA Catalyst

Multilayer polymer films (MFs) containing poly(ethylene-co-vinyl alcohol) (EVOH) and polyolefins are ubiquitous in single-use food and medical packaging. MFs are currently landfilled or incinerated rather than mechanically recycled because of the processing difficulties associated with their form factor and complex multicomponent structures. Advanced chemical recycling is a promising solution. Prior reports have explored hydrogenolysis and hydrodeoxygenation to convert EVOH, but these technologies are limited by catalyst deactivation and slow apparent kinetics, respectively. Alternatively, in this work, we demonstrate the efficient hydrocracking of commercial MFs into naphtha range (C5-C12) alkanes over platinum (Pt) supported on acidic zeolites. Mixtures of low-density polyethylene (LDPE) and EVOH are utilized as MF surrogates to gain fundamental insights. Pt deposited on BEA supports with varying Lewis acid site (LAS) concentrations are synthesized and tested for hydrocracking. Surprisingly, Pt/BEA with high LAS concentrations demonstrate improved activity for LPDE/EVOH blends over LDPE alone. In contrast, LAS concentrations are shown to have no influence on LDPE hydrocracking. LAS and Brønsted acid sites (BAS) catalyze the dehydration of EVOH to form water, which improves LDPE hydrocracking. Polyaromatics formed primarily via EVOH thermal degradation lead to detrimental coke formation, which hinders hydrocracking activity. Reaction conditions and feed ratios of LDPE and EVOH are tuned to balance these competing effects. Reusability tests demonstrate that Pt/BEA maintains high activity (81% conversion in 2 h) and high selectivity towards naphtha (78%) over multiple reuse cycles. Furthermore, these findings position hydrocracking as a promising technology for the circularity of complex MF plastic waste.

36 MATERIALS SCIENCE↗

A mechanistic study explaining the synergistic viscosity increase obtained from polyethylene oxide (PEO) and {beta}-naphthalene sulfonate (BNS) in shotcrete

In shotcrete, a combination of polyethylene oxide (PEO) and {beta}-naphthalene sulfonate (BNS) is commonly applied to reduce rebound. Here, the mechanism for the synergistic viscosity increase resulting from this admixture combination was investigated via x-ray diffraction (XRD), infrared and nuclear magnetic resonance (NMR) spectroscopy. It was found that the electron-rich aromatic rings present in BNS donate electrons to the alkyl protons of PEO and thus increase the electron density there. This rare interaction is known as CH-{pi} interaction and leads to the formation of a supramolecular structure whereby PEO chains bind weakly to BNS molecules. Through this mechanism a polymer network exhibiting exceptionally high molecular weight and thus viscosity is formed. Among polycondensates, sulfanilic acid-phenol-formaldehyde (SPF) provides even higher synergy with PEO than BNS while melamine (PMS), acetone (AFS) or polycarboxylate (PCE) based superplasticizers do not work at all. Effectiveness of lignosulfonates is dependent on their degree of sulfonation.

36 MATERIALS SCIENCE↗

Bifunctional tandem catalytic upcycling of polyethylene to surfactant-range alkylaromatics

Catalytic conversion of waste polyolefins to value-added alkylaromatics could contribute to carbon recycling. Compared with tandem hydrogenolysis/aromatization of polyethylene (PE) catalyzed by Pt/γ-Al 2 O 3 at 280°C, both a 5-fold enhancement in the rate of C–C bond scission and a doubling of the molar yield of alkylaromatics were achieved using a more acidic Pt/F-Al 2 O 3 catalyst instead. Bifunctional (metal/acid) catalysts also generate alkylaromatic products with lower average carbon numbers (ca. C 20 ), similar to conventional anionic surfactants. Because physical mixtures of weakly acidic Pt/γ-Al 2 O 3 or non-acidic Pt/SiO 2 with strongly Brønsted acidic Cl-Al 2 O 3 or F-Al 2 O 3 are also effective, the tandem reaction does not require nanoscale intimacy between metal and acid active sites. Kinetic studies using triacontane (norm-C 30 H 62 ) as a model for PE show that the Pt-catalyzed dehydrogenation/hydrogenation reactions are quasi-equilibrated, while the acid-catalyzed C–C bond scission and skeletal transformations (isomerization and cyclization) determine the overall rates of depolymerization and aromatic formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of temperature and time on supercritical methanol Co-Liquefaction of rice straw and linear low-density polyethylene wastes

We report that biofuels are particularly attractive and play an increasingly important role in sustainable energy. However, biofuels originating from lignocellulosic biomass (LCB) are extremely challenging because of their low carbon content, low stability, and high oxygen content. This work evaluates the supercritical methanol (scMeOH) co-liquefaction of rice straw and linear low-density polyethylene (LLDPE) at temperature range of 240-340 °C for 0-2 h, to obtain hydrocarbons (HCs)-rich oil and carbon-rich solid product. Results show that reaction temperature dominated the yield and properties of products, but not the holding time. Among parameters tested, 30.07 wt% oil yield with 75.79% HCs content and 33.05 wt% oil yield with 70.91% HCs content were obtained at 300 °C for 1 h and 1.5 h, respectively. Simultaneously, the remaining solid products were still as high as 53.85 wt% with a carbon content of 79.59% and 48.28 wt% with carbon content of 81.34% under 300 °C for 1 h and 1.5 h, respectively. Ultimate analysis, FT-IR, TGA, and SEM show that solid products could be used as sustainable carbon resources, and solid fuel rather than soil amendment because of risk of micro plastic or adsorbent due to smooth surface without pores.

09 BIOMASS FUELS↗

Effect of Specimen Thickness on Fracture Toughness and Plane Stress to Plane Strain Transition in Medium-Density Polyethylene

This study investigates the effect of specimen thickness on fracture toughness and the transition from plane stress to plane strain conditions in Medium-Density Polyethylene (MDPE) using Single Edge Notched Bend (SENB) specimens. Three thickness groups (7.5 mm, 9.0 mm, and 12.1 mm) were tested following ASTM D5045 protocol. Conditional stress intensity factors (KQ) increased from 2.2 MPavm to 2.8 MPavm with increasing thickness, demonstrating significant size dependency. Confocal microscopy revealed a 34% reduction in maximum crack tip opening displacement (CTOD) from 0.478 mm to 0.314 mm as thickness increased, with plastic zone lateral extent decreasing by 32%. This quantitative evidence validates Irwin's theoretical prediction of plastic zone size transition from plane stress r_y˜ (1/2p) (K_I/s_y )^2 to plane strain conditions r_y˜ (1/6p) (K_I/s_y )^2.Scanning electron microscopy confirmed progressive suppression of shear lips and evolution from ductile tearing with extensive polymer chain drawing in thin specimens to localized crazing in thick specimens. Despite all specimens satisfying the ASTM D5045 criterion (B = 2.5(KQ/s_y )^2 ) ,residual shear lips persisted even in the thickest specimens, demonstrating that nominal size requirements alone are insufficient for achieving complete plane strain conditions in highly ductile polymers. The findings emphasize the necessity of integrated analytical and morphological assessment for valid fracture toughness characterization, with critical implications for life assessment and integrity prediction in thick-section polymer components such as natural gas distribution pipelines.

Medium-Density Polyethylene↗