Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PPb”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

The abundance of AsH3 in Jupiter

Both ground-based and airborne observations of the AsH3 Q-branch at 2126/cm, in conjunction with newly-analyzed laboratory comparison spectra at AsH3, are employed in the derivation of a new estimate of Jovian As abundance. The mole fraction on AsH3 in the Jovian atmosphere is 0.22 + or - 0.11 ppb; this is merely 0.5 times the solar abundance, and a factor-of-9 less than the mole fraction found in Saturn, duplicating the pattern noted in the relative abundance of P in these two planets and furnishing a useful constraint for models of heavy element incorporation in the outer planets' gaseous envelopes.

Noll, Keith S.↗

Photocatalytic post-treatment in waste water reclamation systems

A photocatalytic water purification process is described which effectively oxidizes organic impurities common to reclaimed waste waters and humidity condensates to carbon dioxide at ambient temperatures. With this process, total organic carbon concentrations below 500 ppb are readily achieved. The temperature dependence of the process is well described by the Arrhenius equation and an activation energy barrier of 3.5 Kcal/mole. The posttreatment approach for waste water reclamation described here shows potential for integration with closed-loop life support systems.

Cooper, Gerald↗

On the determination of iridium in diverse geological samples employing HPGe-coincidence/NaI(Tl)-anticoincidence spectrometry

This paper reports the Ir content of a variety of geological samples determined by the high-purity Ge-coincidence/NaI(Tl)-anticoincidence gamma-ray spectrometry (henceforth referred to as coincidence/anticoincidence technique) and by the conventional INAA. The advantages of this technique are: (1) the Ir content of the samples is obtained (ppm to a fraction of ppb ranges) not only by the 468.1 keV peak as in the conventional INAA but also by the 784.6 keV and 920.9 keV sum peaks, which gives more confidence in the values obtained; and (2) it is well suited for the samples with high Compton background for which it is difficult to measure the Ir content by the conventional INAA technique. The practical sensitivity of this technique depends on the sample matrix. Under present experimental conditions, it varied from 0.1 ng for Mn nodules and 0.004 ng for Libyan Desert Glass. Iridium values obtained on small (about 1 microg) olivine grains demonstrate the potential application of this new technique to microsamples. The principle and methodology of this new technique as well as its advantages and disadvantages over the conventional INAA are discussed.

Murali, A. V.↗

Hydrogen constituents of the mesosphere inferred from positive ions - H2O, CH4, H2CO, H2O2, and HCN

The concentrations in the mesosphere of H2O, CH4, H2CO, H2O2, and HCN were inferred from data on positive ion compositions, obtained from one mid-latitude and four high-latitude rocket flights. The inferred concentrations were found to agree only partially with the ground-based microwave measurements and/or model prediction by Garcia and Solomon (1985). The CH4 concentration was found to vary between 70 and 4 ppb in daytime and 900 and 100 ppbv at night, respectively. Unexpectedly high H2CO concentrations were obtained, with H2CO/H2O ratios between 0.0006 and 0.1, and a mean HCN volume mixing ratio of 6 x 10 to the -10th was inferred.

Kopp, E.↗

Simultaneous, in situ measurements of OH, HO2, O3, and H2O - A test of modeled stratospheric HO(x) chemistry

Simultaneous, in situ measurements of OH, HO2, H2O, and O3 from 37-23 km are reported. The partitioning between OH and HO2 and the total HO(x) concentration are compared with expected steady-state values. The ratio of HO2 to OH varies from less than 2 at 36 km to more than 3 at 25 km; in the lower stratosphere this ratio is nearly a factor of two less than predicted. The data are used to calculate HO(x) production and loss rates. The measured HO(x) mixing ratio is consistent with production dominated by the reaction of O(1D) with H2O, and loss controlled by NOy below 28 km and HO(x) above 30 km. The steady-state concentration of H2O2 is inferred from the measured HO2 concentration and calculated photolysis rate. The maximum H2O2 mixing ratio (at 33 km) is predicted to be less than 0.2 ppb.

Wennberg, P. O.↗

A 200 MHz surface acoustic wave resonator mass microbalance

The development of a 200 MHz SAW instrument based on an SAW resonator instead of a conventional delay line is reported. The instrument is small, compact, and uses two separate 200 MHz resonataor crystals which operate in the dual difference mode. The difference frequency stability is better than 5 x 10 to the -9th (+ or - 1 Hz) which is comparable to a 10 MHz bulk crystal and at least an order of magnitude better than other commercially available SAW delay lines that operate at comparable frequencies. The mass sensitivity is about 9 x 10 to the 10th Hz sq cm/g. Response to temperature change is found to be about 20 Hz/C from -30 C to 30 C. Response to pressure is found to be linear from 760 to 415 Torr at 3 Hz/Torr. Detection limits for HCl vapors were determined to be in the low ppb range using an SAW resonator coated with triethanolamine.

Bowers, W. D.↗

Titan aerosol and gas experiment for the Huygens Probe

The Cassini Mission is a joint undertaking of NASA and the European Space Agency (ESA) to explore the Saturnian System with a Saturn Orbiter and a Titan Probe. The launch vehicle and the Saturn Orbiter are the responsibility of NASA while the Huygens Probe (detachable Titan Probe) is the responsibility of ESA. The spacecraft will be launched in 1996 and the Huygens Probe will arrive at Titan in 2003. The Cassini Mission-Huygens Probe provides a unique opportunity to obtain detailed information about the atmosphere and, possibly, the surface of Titan. Titan possesses a substantial nitrogen atmosphere containing methane and many other organic compounds. Aerosols play an important role in the atmospheric processes on Titan. The Huygens Probe offers an opportunity to determine how organic particles are formed and grow which will clarify their role on Earth. A powerful analytical instrument, capable of addressing the above technology and other science questions, was recently proposed for the Huygens Probe. It is comprised of an aerosol and gas sampler and processor, and a gas chromatograph-ion mobility spectrometer. The instrument will be able to measure complex organics that make up the collected aerosols to the approximate 1 ppm level. Gases will be measured to approximately 10 ppb. Because the Titan atmosphere is expected to be quite complex, a gas chromatograph-ion mobility spectrometer is used to provide unequivocal identification of the components of the analytes. Further details of the science question to be investigated and the proposed instrument are described. The expected results and their implications are also addressed.

Carle, G. C.↗

Toxicology of atmospheric degradation products of selected hydrochlorofluorocarbons

Trifluoroacetic acid (TFA) is a liquid with a sharp biting odor. It has been proposed as the product of environmental degradation of the hydrochlorofluorocarbons HCFC-123, HCFC-124, HFC-134a, and HFC-125. Compounds HCFC-141b and HCFC-142b could yield mixed fluorochloroacetic acids, for which there is no available toxicologic data. The release of hydrochlorofluorocarbons into the environment could also give rise to HF, but the additional fluoride burden (1 to 3 ppb) in rainwater is trivial compared to levels in fluoridated drinking water (1 ppm), and would provide an insignificant risk to humans. Thus, in this paper only the toxocologic data on TFA is reviewed to assess the potential risks of environmental exposure.

Kaminsky, Laurence S.↗

Total Organic Carbon Analyzer

The development and testing of a breadboard version of a highly sensitive total-organic-carbon (TOC) analyzer are reported. Attention is given to the system components including the CO2 sensor, oxidation reactor, acidification module, and the sample-inlet system. Research is reported for an experimental reagentless oxidation reactor, and good results are reported for linearity, sensitivity, and selectivity in the CO2 sensor. The TOC analyzer is developed with gravity-independent components and is designed for minimal additions of chemical reagents. The reagentless oxidation reactor is based on electrolysis and UV photolysis and is shown to be potentially useful. The stability of the breadboard instrument is shown to be good on a day-to-day basis, and the analyzer is capable of 5 sample analyses per day for a period of about 80 days. The instrument can provide accurate TOC and TIC measurements over a concentration range of 20 ppb to 50 ppm C.

Godec, Richard G.↗

Development of a proton-exchange membrane electrochemical reclaimed water post-treatment system

A single-cell electrochemical reactor that utilizes a proton exchange membrane (PEM) as a solid electrolyte is being investigated for posttreatment of reclaimed waste waters with low or negligible electrolyte content. Posttreatment is a final 'polishing' of reclaimed waste waters prior to reuse, and involves removing organic impurities at levels as high as 100 ppm to below 500 ppb total organic carbon (TOC) content to provide disinfection. The system does not utilize or produce either expendable hardware components or chemicals and has no moving parts. Test data and kinetic analysis are presented. The feasibility and application for water reclamation processes in controlled ecological environments (e.g., lunar/Mars habitats) are also presented. Test results show that the electrochemical single cell reactor provides effective posttreatment.

Kaba, Lamine↗

Daily estimates of the earth's pole position with the Global Positioning System

Daily estimates of the earth's pole position have been obtained with measurements from a worldwide network of GPS receivers, obtained during the three week GIG '91 experiment in January-February 1991. For this short-term study, the GPS based polar motion series agrees with the other space based geodetic techniques (Very Long Baseline Interferometry and Satellite Laser Ranging) to about 0.4 mas rms, after the removal of mean biases of order 1-3 mas. The small error in day-to-day variability is not sensitive to the fiducial strategy used, nor are fiducial sites even necessary for monitoring high frequency pole position variability. The small biases indicate that the applied reference frames of the three geodetic techniques are nearly aligned, that the GPS fiducial errors are small, and that systematic errors in GPS are also small (of order 5 ppb). A well determined reference frame is necessary for monitoring the long-term stability of polar motion and for separating it from other long-term signals such as tectonic motion and internal systematic errors.

Lindqwister, Ulf J.↗

FAGE measurements of tropospheric HO with measurements and model of interferences

Ambient HO measurements by low-pressure laser-excited fluorescence with chemical modulation, and supporting ozone and water-vapor data, are presented for periods in May and August 1987. The observed peak daytime ambient HO concentrations are in the range (2.5 to 8) x 10 exp 6 molecules/cu cm and show small negative offsets due to photochemical interference. Direct measurements of the interference at fixed (O3) give the dependence on ambient (H2O) and on the modulating reagent (isobutane). At ambient (O3) = 30 ppb and 10 torr H2O, with excitation and detection at a total pressure of 4 torr, the net interference is equal to (HO) = -1.3 x 10 exp 6 molecules/cu cm. Production of HO by the reaction of isobutane with O(1D) accounts for the negative interference. Quenching of HO fluorescence by the modulating reagent contributes a smaller positive term to the interference; kinetic measurements of the quenching rate coefficient are reported. The experimental interference results are compared with a detailed kinetic model of HO production, excitation, relaxation, and detection; reasonable agreement is found.

Hard, T. M.↗

Aerodyne Research mobile infrared methane monitor

An improved real-time methane monitor based on infrared absorption of the 3.39 micron line of a HeNe laser is described. Real time in situ measurement of methane has important applications in stratospheric and tropospheric chemistry, especially when high accuracy measurements can be made rapidly, providing fine spatial-scale information. The methane instrument provides 5 ppb resolution in a 1 sec averaging time. A key feature in this instrument is the use of magnetic (Zeeman) broadening to achieve continuous tunability with constant output power over a range of 0.017/cm. The instruments optical absorption path length is 47 m through sampled air held at 50 torr in a multipass cell of the Herriott (off-axis resonator) type. A microprocessor controls laser frequency and amplitude and collects data with minimal operator attention. The instrument recently has been used to measure methane emissions from a variety of natural and artificial terrestrial sources.

Mcmanus, J. B.↗

Search for a meteoritic component at the Beaverhead impact structure, Montana

The Beaverhead impact structure, in southwestern Montana, was identified recently by the presence of shatter cones and impactites in outcrops of Proterozoic sandstones of the Belt Supergroup. The cones occur over an area greater than 100 sq km. Because the geologic and tectonic history of this region is long and complex, the outline of the original impact crater is no longer identifiable. The extent of the area over which shatter cones occur suggests, however, that the feature may have been at least 60 km in diameter. The absence of shatter cones in younger sedimentary units suggests that the impact event occurred in late Precambrian or early Paleozoic time. We have collected samples of shocked sandstone from the so-called 'Main Site' of dark-matrix breccias, and of impact breccias and melts from the south end of Island Butte. The melts, occurring often as veins through brecciated sandstone, exhibit a distinctive fluidal texture, a greenish color, and a cryptocrystalline matrix, with small inclusions of deformed sandstone. Samples of the same type, along with country rock, were analyzed previously for major- and trace-element abundances. It was found that, although the major-element composition as relatively uniform, trace-element composition showed variations between the melt material and the adjacent sandstone. These variations were attributed to extensive weathering and hydrothermal alteration. In a more specific search for a possible meteoritic signature in the breccia and the melt material we have conducted a new series of trace-element analyses on powders of our own samples by thermal neutron activation analysis. Our results indicate that Ir abundances in the breccia, the melts, and the adjacent sandstone clasts are no greater than about 0.1 ppb, suggesting no Ir enrichment of the breccia or the melts relative to the country rock. However, both the breccia and the melt material exhibit notable enrichments in Cr (8- and 10-fold), in U (9- and 5-fold), and in the heavy REE's (1.5- and 3-fold), respectively.

Lee, Pascal↗

Measuring the earth to within an inch using GPS satellites

In 1991, NASA-JPL coordinated the GPS for International Earth Rotation Service and Geodynamics '91, or GIG'91, three-week experiment; this had as its fundamental purpose the demonstration of GPS monitoring of earth rotation. Distance precisions of 3-20 ppb, or several cm across the diameter of the earth, were demonstrated by several analysis groups by means of their software systems; these results are approximately 100 times more precise than commercial GPS software. While satellite laser ranging and VLBI have been capable of such precision for several years, GPS is more cost-effective in many cases.

Blewitt, Geoffrey↗

A search for C60 in carbonaceous chondrites

Analysis of interior samples of the Murchison meteorite by two routes yielded an upper limit of 2 ppb for its C60 content, as compared to parts per million levels for individual polycyclic aromatic hydrocarbons (PAHs ). Provided the samples contain an interstellar component, which is probable since Murchison hydrocarbons contain excess deuterium, this result argues against the ubiquitous presence of C60 in the interstellar medium. A possible explanation for the absence of C60 was found in experiments showing how PAHs replace fullerenes as stable end products when hydrogen is present during carbon condensation. As a secondary result we found high molecular weight PAHs in the Murchison and Allende meteorites. Coronene and its methyl derivatives are especially interesting since features in the coronene spectrum have been shown to match some of the unidentified interstellar infrared emission bands.

De Vries, M. S.↗

Rates of oxidative weathering on the surface of Mars

A model of acid weathering is proposed for the iron-rich basalts on Mars. Aqueous oxidation of iron sulfides released SO4(2-) and H(+) ions that initiated the dissolution of basaltic ferromagnesian silicates and released Fe(2+) ions. The Fe(2+) ions eventually underwent ferrolysis reactions and produced insoluble hydrous ferric oxide phases. Measurements of the time-dependence of acid weathering reactions show that pyrrhotite is rapidly converted to pyrite plus dissolved ferrous iron, the rate of pyrite formation decreasing with rising pH and lower temperatures. On Mars, oxidation rates of dissolved Fe(2+) ions in equatorial melt-waters in contact with the atmosphere are estimated to lie in the range 0.3-3.0 ppb Fe/yr over the pH range 2 to 6. Oxidation of Fe(2+) ions is estimated to be extremely slow in brine eutectic solutions that might be present on Mars and to be negligible in the frozen regolith.

Burns, Roger G.↗

Measurement of the temperature coefficient of ratio transformers

We have measured the temperature coefficient of the output of several ratio transformers at ratios near 0.500,000 using an ac bridge and a dual-phase, lock-in amplifier. The two orthogonal output components were each resolved to +/- ppb of the bridge drive signal. The results for three commercial ratio transformers between 20 and 50 C range from 0.5 to 100 ppb/K for the signal component in phase with the bridge drive, and from 4 to 300 ppb/K for the quadrature component.

Briggs, Matthew E.↗