Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PLASMA GUN”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Ion acceleration by laser hole-boring into plasmas

By experiment and simulations, we study the interaction of an intense CO{sub 2} laser pulse with slightly overcritical plasmas of fully ionized helium gas. Transverse optical probing is used to show a recession of the front plasma surface with an initial velocity >10{sup 6} m/s driven by hole-boring by the laser pulse and the resulting radiation pressure driven electrostatic shocks. The collisionless shock propagates through the plasma, dissipates into an ion-acoustic solitary wave, and eventually becomes collisional as it slows further. These observations are supported by PIC simulations which prove the conclusion that monoenergetic protons observed in our earlier reported experiment with a hydrogen jet result from ion trapping and reflection from a shock wave driven through the plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Multiple pulse resonantly enhanced laser plasma wakefield acceleration

We present an outline of experiments being conducted at Oxford University on multiple-pulse, resonantly-enhanced laser plasma wakefield acceleration. This method of laser plasma acceleration uses trains of optimally spaced low energy short pulses to drive plasma oscillations and may enable laser plasma accelerators to be driven by compact and efficient fibre laser sources operating at high repetition rates.

43 PARTICLE ACCELERATORS↗

Comment on 'Three-dimensional numerical investigation of electron transport with rotating spoke in a cylindrical anode layer Hall plasma accelerator'[Phys. Plasmas 19, 073519 (2012)]

The oscillation behavior described by Tang et al.[Phys. Plasmas 19, 073519 (2012)] differs too greatly from previous experimental and numerical studies to claim observation of the same phenomenon. Most significantly, the rotation velocity by Tang et al.[Phys. Plasmas 19, 073519 (2012)] is three orders of magnitude larger than that of typical 'rotating spoke' phenomena. Several physical and numerical considerations are presented to more accurately understand the numerical results of Tang et al.[Phys. Plasmas 19, 073519 (2012)] in light of previous studies.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Response to 'Comment on 'Three-dimensional numerical investigation of electron transport with rotating spoke in a cylindrical anode layer Hall plasma accelerator''[Phys. Plasmas 20, 014701 (2013)]

The numerical simulation described in our paper [D. L. Tang et al., Phys. Plasmas 19, 073519 (2012)] shows a rotating dense plasma structure, which is the critical characteristic of the rotating spoke. The simulated rotating spoke has a frequency of 12.5 MHz with a rotational speed of {approx}1.0 Multiplication-Sign 10{sup 6} m/s on the surface of the anode. Accompanied by the almost uniform azimuthal ion distribution, the non-axisymmetric electron distribution introduces two azimuthal electric fields with opposite directions. The azimuthal electric fields have the same rotational frequency and speed together with the rotating spoke. The azimuthal electric fields excite the axial electron drift upstream and downstream due to the additional E{sub {theta}} x B field and then the axial shear flow is generated. The axial local charge separation induced by the axial shear electron flow may be compensated by the azimuthal electron transport, finally resulting in the azimuthal electric field rotation and electron transport with the rotating spoke.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Tailoring the laser pulse shape to improve the quality of the self-injected electron beam in laser wakefield acceleration

In laser wakefield acceleration, tailoring the shape of the laser pulse is one way of influencing the laser-plasma interaction and, therefore, of improving the quality of the self-injected electron beam in the bubble regime. Using three-dimensional particle-in-cell simulations, the evolution dynamics of the laser pulse and the quality of the self-injected beam, for a Gaussian pulse, a positive skew pulse (i.e., one with sharp rise and slow fall), and a negative skew pulse (i.e., one with a slow rise and sharp fall) are studied. It is observed that with a negative skew laser pulse there is a substantial improvement in the emittance (by around a factor of two), and a modest improvement in the energy-spread, compared to Gaussian as well as positive skew pulses. However, the injected charge is less in the negative skew pulse compared to the other two. It is also found that there is an optimal propagation distance that gives the best beam quality; beyond this distance, though the energy increases, the beam quality deteriorates, but this deterioration is least for the negative skew pulse. Thus, the negative skew pulse gives an improvement in terms of beam quality (emittance and energy spread) over what one can get with a Gaussian or positive skew pulse. In part, this is because of the lesser injected charge, and the strong suppression of continuous injection for the negative skew pulse.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Laser-driven collimated tens-GeV monoenergetic protons from mass-limited target plus preformed channel

Proton acceleration by ultra-intense laser pulse irradiating a target with cross-section smaller than the laser spot size and connected to a parabolic density channel is investigated. The target splits the laser into two parallel propagating parts, which snowplow the back-side plasma electrons along their paths, creating two adjacent parallel wakes and an intense return current in the gap between them. The radiation-pressure pre-accelerated target protons trapped in the wake fields now undergo acceleration as well as collimation by the quasistatic wake electrostatic and magnetic fields. Particle-in-cell simulations show that stable long-distance acceleration can be realized, and a 30 fs monoenergetic ion beam of >10 GeV peak energy and <2 Degree-Sign divergence can be produced by a circularly polarized laser pulse at an intensity of about 10{sup 22} W/cm{sup 2}.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Analytic model of electromagnetic fields around a plasma bubble in the blow-out regime

An analytic model of the electric and magnetic fields surrounding the nonlinear plasma 'bubble' formed around the high-current electron bunch in a plasma wakefield accelerator is developed. The model, justified by the results of particle-in-cell simulations, accurately captures the thin high-density plasma sheath and extended return current layer surrounding the bubble. The resulting global fields inside and outside the bubble are used to investigate electron self-injection in a plasma with a smooth density gradient. It is shown that accurate description of the current/density sheaths is crucial for quantitative description of self-injection.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Concentrated ion beam emitted from an enlarged cylindrical-anode-layer Hall plasma accelerator and mechanism

An enlarged cylindrical-anode-layer Hall plasma accelerator with an outlet diameter of 150 mm is experimentally demonstrated to produce a concentrated ion beam, especially at a high discharge voltage, with a high current utilization efficiency of up to {approx}0.9. Numerical investigation based on the three-dimensional particle-in-cell method is performed to study the ion dynamics and elucidate the origin of the ion beam characteristics. The simulation results reveal that the equipotential lines play an important role in the surface near the anode emitting the ions. The ion emitting surface is determined by the magnetic field lines near the anode and the magnetic mirror contributes to the concentrated beam significantly. The high current utilization efficiency results from the appropriate obliquity of the magnetic mirror.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Laser-heater assisted plasma channel formation in capillary discharge waveguides

A method of creating plasma channels with controllable depth and transverse profile for the guiding of short, high power laser pulses for efficient electron acceleration is proposed. The plasma channel produced by the hydrogen-filled capillary discharge waveguide is modified by a ns-scale laser pulse, which heats the electrons near the capillary axis. This interaction creates a deeper plasma channel within the capillary discharge that evolves on a ns-time scale, allowing laser beams with smaller spot sizes than would otherwise be possible in the unmodified capillary discharge.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Coherent seeding of self-modulated plasma wakefield accelerators

The growth of the beam self-modulation and hosing instabilities initiated by a seed wakefield is examined. Although the growth rates for the self-modulation and hosing instabilities are comparable, it is shown that an externally excited wakefield can be effective in selectively seeding the beam radial self-modulation, enabling the beam to fully modulate before strong beam hosing develops. Methods for coherent seeding are discussed.

43 PARTICLE ACCELERATORS↗

Beryllium liner implosion experiments on the Z accelerator in preparation for magnetized liner inertial fusion

Multiple experimental campaigns have been executed to study the implosions of initially solid beryllium (Be) liners (tubes) on the Z pulsed-power accelerator. The implosions were driven by current pulses that rose from 0 to 20 MA in either 100 or 200 ns (200 ns for pulse shaping experiments). These studies were conducted in support of the recently proposed Magnetized Liner Inertial Fusion concept [Slutz et al., Phys. Plasmas 17, 056303 (2010)], as well as for exploring novel equation-of-state measurement techniques. The experiments used thick-walled liners that had an aspect ratio (initial outer radius divided by initial wall thickness) of either 3.2, 4, or 6. From these studies, we present three new primary results. First, we present radiographic images of imploding Be liners, where each liner contained a thin aluminum sleeve for enhancing the contrast and visibility of the liner's inner surface in the images. These images allow us to assess the stability of the liner's inner surface more accurately and more directly than was previously possible. Second, we present radiographic images taken early in the implosion (prior to any motion of the liner's inner surface) of a shockwave propagating radially inward through the liner wall. Radial mass density profiles from these shock compression experiments are contrasted with profiles from experiments where the Z accelerator's pulse shaping capabilities were used to achieve shockless (“quasi-isentropic”) liner compression. Third, we present “micro-B-dot ” measurements of azimuthal magnetic field penetration into the initially vacuum-filled interior of a shocked liner. Our measurements and simulations reveal that the penetration commences shortly after the shockwave breaks out from the liner's inner surface. The field then accelerates this low-density “precursor” plasma to the axis of symmetry.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Breathing oscillations in enlarged cylindrical-anode-layer Hall plasma accelerator

Breathing oscillations in the discharge of an enlarged cylindrical-anode-layer Hall plasma accelerator are investigated by three-dimensional particle-in-cell (PIC) simulation. Different from the traditional breathing mode in a circular Hall plasma accelerator, the bulk plasma oscillation here is trigged by the potential barrier generated by the concentrated ion beam and substantial enough to compete with the anode voltage. The electric field near the anode is suppressed by the potential barrier thereby decreasing the electron density by {approx}36%. The discharge is restored to the normal level after the concentrated beam explodes and then it completes one cycle of electro-driven breathing oscillation. The breathing mode identified by the PIC simulation has a frequency range of {approx}156 kHz-{approx}250 kHz and does not vary monotonically with the discharge voltage.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

High-quality electron beam from laser wake-field acceleration in laser produced plasma plumes

Generation of highly collimated ({theta}{sub div}{approx}10 mrad), quasi-monoenergetic electron beam with peak energy 12 MeV and charge {approx}50 pC has been experimentally demonstrated from self-guided laser wake-field acceleration (LWFA) in a plasma plume produced by laser ablation of solid nylon (C{sub 12}H{sub 22}N{sub 2}O{sub 2}){sub n} target. A 7 TW, 45 fs Ti:sapphire laser system was used for LWFA, and the plasma plume forming pulse was derived from the Nd:YAG pump laser of the same system. The results show that a reproducible, high quality electron beam could be produced from this scheme which is simple, low cost and has the capability for high repetition rate operation.

43 PARTICLE ACCELERATORS↗

Probing electron acceleration and x-ray emission in laser-plasma accelerators

While laser-plasma accelerators have demonstrated a strong potential in the acceleration of electrons up to giga-electronvolt energies, few experimental tools for studying the acceleration physics have been developed. In this paper, we demonstrate a method for probing the acceleration process. A second laser beam, propagating perpendicular to the main beam, is focused on the gas jet few nanosecond before the main beam creates the accelerating plasma wave. This second beam is intense enough to ionize the gas and form a density depletion, which will locally inhibit the acceleration. The position of the density depletion is scanned along the interaction length to probe the electron injection and acceleration, and the betatron X-ray emission. To illustrate the potential of the method, the variation of the injection position with the plasma density is studied.

43 PARTICLE ACCELERATORS↗

Increasing energy coupling into plasma waves by tailoring the laser radial focal spot distribution in a laser wakefield accelerator

By controlling the focal spot quality with a deformable mirror, we are able to show that increasing the fraction of pulse energy contained within the central part of the focal spot, while keeping the total energy and central spot size constant, significantly increases the amount of energy transferred to the wakefield: Our measurements show that the laser loses significantly more laser energy and undergoes greater redshifting and that more charge is produced in the accelerated beam. Three dimensional particle in cell simulations performed with accurate representations of the measured focal spot intensity distribution confirm that energy in the wings of the focal spot is effectively wasted. Even though self-focusing occurs, energy in the wings of the focal spot distribution is not coupled into the wakefield, emphasising the vital importance of high quality focal spot profiles in experiments.

43 PARTICLE ACCELERATORS↗

Laser red shifting based characterization of wakefield excitation in a laser-plasma accelerator

Optical spectra of a drive laser exiting a channel guided laser-plasma accelerator (LPA) are analyzed through experiments and simulations to infer the magnitude of the excited wakefields. The experiments are performed at sufficiently low intensity levels and plasma densities to avoid electron beam generation via self-trapping. Spectral redshifting of the laser light is studied as an indicator of the efficiency of laser energy transfer into the plasma through the generation of coherent plasma wakefields. Influences of input laser energy, plasma density, temporal and spatial laser profiles, and laser focal location in a plasma channel are analyzed. Energy transfer is found to be sensitive to details of laser pulse shape and focal location. The experimental conditions for these critical parameters are modeled and included in particle-in-cell simulations. Simulations reproduce the redshift of the laser within uncertainties of the experiments and produce an estimate of the wake amplitudes in the experiments as a function of amount of redshift. The results support the practical use of laser redshifting to quantify the longitudinally averaged accelerating field that a particle would experience in an LPA powered below the self-trapping limit.

43 PARTICLE ACCELERATORS↗

Three dimensional effects on proton acceleration by intense laser solid target interaction

Multi-dimensional effects on ion acceleration by a normally incident linearly polarized intense laser pulse interacting with a thin solid target have been investigated numerically, where the laser has the peak intensity of 1.37×10{sup 20} W/cm{sup 2}, focused spot size of 6 μm, pulse duration of 33 fs, and total pulse energy about 3 J, which are commercially available now. We have checked the effects of simulation geometries by running one, two, and three dimensional (1D, 2D, 3D) particle-in-cell simulations. 3D simulation results show that, in the case of using a relatively thick target (in the opaque regime, i.e., 2 μm) with the so-called target normal sheath field acceleration mechanism, electrons spread almost uniformly along two transverse directions. While in the case of using an ultra-thin target (in the relativistic-induced transparent regime, i.e., 100 nm) with the so-called break-out afterburner mechanism, electrons spread more quickly along the direction orthogonal to the laser polarization direction especially at the early stage. The transverse spreading of electrons strongly decreases the electron density at the rear side of the target. Such an effect causes different estimation of electron temperatures in different simulation geometries. Usually, 1D and 2D simulations overestimate the temperature; and as a result, the maximum proton energy observed in 1D and 2D simulations is, respectively, about 3 and 2 times of that observed in 3D simulation.

43 PARTICLE ACCELERATORS↗

Advances in target normal sheath acceleration theory

A theoretical model of the Target Normal Sheath Acceleration (TNSA) process, able to go beyond the limits of available descriptions, is developed. It allows to achieve a more satisfactory interpretation of TNSA. The theory, also supported by two dimensional particle-in-cell simulations, elucidates the role played by the main laser and target parameters. Comparison between model predictions and experimental data related to the target thickness dependence of the maximum ion energy is discussed, showing satisfactory agreement. The model can be used as a simple but effective tool to guide the design of future experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗