Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “OXIDATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Sorption and Oxidative Degradation of Small Organic Molecules on Mn-Oxides-Effects of pH and Mineral Structures

Manganese (Mn)-oxides regulate carbon (C) cycling in soils by sorbing and oxidizing organic compounds. The composition of soil organic matter varies widely, and little is known about the reactivity of individual organic compounds with structurally diverse Mn-oxides under various environmentally relevant pH conditions. Here, in this study, we examined the affinity of six organic compounds for three Mn-oxides, comprised of layer (birnessite and hydrous Mn oxide HMO) or tunnel (cryptomelane) structures, at acidic (pH 4), slightly acidic (pH 6), and slightly alkaline (pH 8) conditions. Cryptomelane, with a higher specific surface area and point of zero charge, showed higher reactivity than that of HMO and birnessite. Interestingly, these Mn-oxides, although different in structures, decomposed each organic compound to form the same products. Citrate, pyruvate, ascorbate, and catechol induced reduction and dissolution of Mn-oxides. After the reaction, the average oxidation state of Mn in the solids was much lower at pH 4 than at pH 6 and 8, suggesting more reduction under more acidic conditions. Even when reacting with phthalate and propanol, which only sorbed to Mn-oxides but did not degrade, there was proton-promoted Mn dissolution under acidic conditions. These results suggest the significance of environmental pH and mineral structures in affecting the Mn–organic interactions and provide fundamental insights into a better understanding of the roles of Mn-oxides in regulating soil C cycling.

58 GEOSCIENCES↗
DOE OSTI2015

Effects of Oxidation on Oxidation-Resistant Graphite

The Advanced Reactor Technology (ART) Graphite Research and Development Program is investigating doped nuclear graphite grades that exhibit oxidation resistance through the formation of protective oxides on the surface of the graphite material. In the unlikely event of an oxygen ingress accident, graphite components within the VHTR core region are anticipated to oxidize so long as the oxygen continues to enter the hot core region and the core temperatures remain above 400°C. For the most serious air-ingress accident which persists over several hours or days the continued oxidation can result in significant structural damage to the core. Reducing the oxidation rate of the graphite core material during any air-ingress accident would mitigate the structural effects and keep the core intact. Previous air oxidation testing of nuclear-grade graphite doped with varying levels of boron-carbide (B 4 C) at a nominal 739°C was conducted for a limited number of doped specimens demonstrating a dramatic reduction in oxidation rate for the boronated graphite grade. This report summarizes the conclusions from this small scoping study by determining the effects of oxidation on the mechanical strength resulting from oxidation of boronated and unboronated graphite to a 10% mass loss level. While the B 4 C additive did reduce mechanical strength loss during oxidation, adding B 4 C dopants to a level of 3.5% or more reduced the as-fabricated compressive strength nearly 50%. This effectively minimized any benefits realized from the protective film formed on the boronated grades. Future work to infuse different graphite grades with silicon- and boron-doped material as a post-machining conditioning step for nuclear components is discussed as a potential solution for these challenges in this report.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Photocatalytic Oxidation of Dissolved Mn 2+ by TiO 2 and the Formation of Tunnel Structured Manganese Oxides

The redox reaction of manganese (Mn) is of great environmental, geological, and public health significance, as Mn oxides control the distribution and electron flow of numerous nutrients and contaminants in natural and engineered environments. Current understanding on the oxidation pathways of Mn(II) to Mn(III/IV) mainly focuses on biotic processes due to their much higher oxidation rates than those of abiotic processes. This study demonstrates rapid photocatalytic oxidation of Mn 2+ (aq) under circumneutral conditions catalyzed by naturally abundant semiconducting TiO 2 minerals. Notably, the photocatalytic oxidation rates are comparable to or even higher than those of reported biotic/abiotic processes. In addition, the rapid photocatalytic oxidation leads to the formation of large tunnel structured Mn oxides (todorokite and romanechite) on the surface of TiO 2 . These findings suggest that photocatalytic oxidation of Mn 2+ (aq) by natural semiconducting minerals is likely an important yet previously overlooked pathway for understanding the occurrence of natural Mn oxide coatings on rock surfaces. In addition, considering the increasing input of photoreactive engineered nanoparticles into environmental systems, this work shows the potential impacts of nanoparticles on influencing natural redox cycles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2015

New Insights into Low-Temperature Oxidation of Propane from Synchrotron Photoionization Mass Spectrometry and Multiscale Informatics Modeling

We investigated the low-temperature oxidation of propane at 4 Torr and temperatures of 530, 600, and 670 K. The oxidation is initiated by pulsed laser photolysis of oxalyl chloride, (COCl)2, at 248 nm, which rapidly generates a ~1:1 mixture of 1-propyl (n-propyl) and 2-propyl (i-propyl) radicals via the fast Cl + propane reaction. Reactants, intermediates and products are probed with isomeric selectivity by time-resolved multiplexed photoionization mass spectrometry (MPIMS) with tunable synchrotron vacuum UV radiation as the ionization source. At all three temperatures, the major stable product species is propene, formed in the C3H7 + O2 reactions by direct HO2-elimination from both n- and i-propyl peroxy radicals. The experimentally derived propene yields relative to the initial concentration of Cl atoms are (20 ± 4)% at 530 K, (55 ± 11)% at 600 K, and (86 ± 17)% at 670 K at a reaction time of 20 ms. The lower yield of propene at low temperature reflects substantial formation of propyl peroxy radicals, which do not completely decompose on the experimental time scale. In addition, we detect the C3H6O isomers methyloxirane, oxetane, acetone and propanal as minor products. Our measured yields of oxetane and methyloxirane, which are co-products of OH radicals, suggest a revision of the OH formation pathways in models of low-temperature propane oxidation. The experimental results are modeled and interpreted using a multi-scale informatics approach that is presented in detail in a separate publication (Burke, M. P.; Goldsmith, C. F.; Klippenstein, S. J.; Welz, O.; Huang H.; Antonov I. O.; Savee J. D.; Osborn D. L.; Zádor, J.; Taatjes, C. A.; Sheps, L., Multi-Scale Informatics for Low-Temperature Propane Oxidation: Further Complexities in Studies of Complex Rections, submitted, 2015). The model predicts the time profiles and yields of the experimentally observed primary products well, and shows satisfactory agreement for products formed mostly via secondary radical-radical reactions.

Combustion↗
DOE OSTI2019

Unified View of the Local Cation-Ordered State in Inverse Spinel Oxides

Cation ordering/disordering in spinel oxides plays a necessary role in the rich physical and chemical properties which are hallmarks of the structural archetype. A variety of cation-ordering motifs have been reported for spinel oxides with multiple cations residing on the octahedral site (or B-site). This has attracted tremendous attention from both experimental and theoretical communities in the last few decades. Yet, no unified view has been reached, presumably due to the richness of cation species and corresponding complex arrangements emergent in this large family of compounds. Here, local cation-ordered ground states of (inverse) spinel oxides with two different cations on the octahedral site have been thoroughly investigated using neutron and X-ray total scattering, and a comprehensive theory has been proposed to explain the commonly observed cation-ordered polymorphs. It is found that a cation-zigzag-ordered structure (space group P4122) is the ground state for inverse spinel oxides with a pure or strong ionic lattice, while a cation-linear-ordered arrangement (space group Imma) emerges when one of the B-site cations forms very strong directional covalent bonds with lattice oxygen. The degree and length scale of cation ordering is strongly correlated with the charge and ionic radius difference between the two octahedral site cations. More complicated cation ordering schemes can be formed when there is a concomitant charge and orbital ordering which fall on a similar energy scale. This can lead to the formation of orbital-driven cation clusters or the broad concept of “molecules” in solid- state compounds. It is anticipated these findings will help to better understand the observed physical properties of spinel oxides and thus facilitate design strategies for improved functional materials.

25 ENERGY STORAGE↗
DOE OSTI2023

Metal-induced oxidative stress and human plasma protein oxidation after SARS-CoV-2 infection

Pathogenesis of COVID-19 by SARS-CoV-2 resulted in a global pandemic and public health emergency in 2020. Viral infection can induce oxidative stress through reactive oxygen species (ROS). Inflammation and environmental stress are major sources of oxidative stress after infection. Micronutrients such as iron, copper, zinc, and manganese play various roles in human tissues and their imbalance in blood can impact immune responses against pathogens including SARS CoV-2. We hypothesized that alteration of free metal ions during infection and metal-catalyzed oxidation plays a critical role towards pathogenesis after infection. We analyzed convalescent and hospitalized COVID-19 patient plasma using orthogonal analytical techniques to determine redox active metal concentrations, overall protein oxidation, oxidative modifications, and protein levels via proteomics to understand the consequences of metal-induced oxidative stress in COVID-19 plasma proteins. Metal analysis using ICP-MS showed significantly greater concentrations of copper in COVID-19 plasma compared to healthy controls. We demonstrate significantly greater total protein carbonylation, other oxidative modifications, and deamidation of plasma proteins in COVID-19 plasma compared to healthy controls. Proteomics analysis showed that levels of redox active proteins including hemoglobulin were elevated in COVID-19 plasma. Molecular modeling concurred with potential interactions between iron binding proteins and SARS CoV-2 surface proteins. Overall, increased levels of redox active metals and protein oxidation indicate that oxidative stress-induced protein oxidation in COVID-19 may be a consequence of the interactions of SARS-CoV-2 proteins with host cell metal binding proteins resulting in altered cellular homeostasis.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2018

A comparative study on the oxidation of two-dimensional Ti 3 C 2 MXene structures in different environments

The oxidation of two-dimensional Ti 3 C 2 MXene structures has been recognized as a promising method for the formation of hybrid structures of carbon supported nanotitania. Here, we studied the oxidation of Ti 3 C 2 MXene structures using reactive force field (ReaxFF) based molecular dynamics simulations. To investigate the effect of oxidizing agent, we used three different environments including dry air (oxygen molecules), wet air (oxygen and water molecules) and hydrogen peroxide (H 2 O 2 molecules). Oxidation simulations were performed at different temperatures of 1000, 1500, 2000, 2500 and 3000 K. We found that by controlling the temperature, carbon supported titania can be formed by diffusion of Ti atoms to the surface of MXene structures during the oxidation. These results were confirmed by the increase in the average bond orders of C–C and Ti–O and decrease in the average bond orders of Ti–C. Moreover, it was revealed that by increasing the temperature, the oxidation rate increases, and the rate depends on the oxidant according to the following order: H 2 O 2 > wet air > dry air. This was validated by heating the MXene in wet air and dry air followed by examining the products using X-ray diffraction and Raman spectroscopy. To investigate the effect of the presence of the oxidant, the MXene structure was also heated under vacuum, and it was found that in this case the MXene structure was converted to cubic TiC. Furthermore, it was indicated that during the heating process of the MXene structure in a vacuum, the average bond orders for C–C, Ti–C and Ti–O do not change significantly due to the lack of oxidants in the environment, leaving room for only topotactic transformation of atoms during the heating. In conclusion, the formation of the TiC structure by heating the MXene in an inert environment was confirmed experimentally as well.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Free Energy Dependencies for Interfacial Electron Transfer from Tin-Doped Indium Oxide (ITO) to Molecular Photoredox Catalysts

John B. Goodenough proposed that interfacial electron transfer kinetics from main group metal oxides should be fundamentally different from that of transition metal oxides, an expectation that has not been widely tested. Herein, the kinetics for interfacial electron transfer from mesoporous transparent conductive oxide Tin-doped Indium Oxide (ITO) to four photoredox catalysts (PCs) were characterized in acetonitrile electrolytes. The photocatalysts had the form: [Ru(4,4ʹ-R 2 -2,2′-bipyridine) 2 (4,4ʹ-(PO 3 H 2 ) 2 -2,2′-bipyridine)] 2+ , where R was H, methoxy, tert -butyl, and Br. The impact of the surface binding group was characterized with [Ru(2,2′-bipyridine) 2 (4,4ʹ-(CO 2 H) 2 -bpy)] 2+ . The interfacial electron transfer reaction ITO(e − )∣PC + → ITO∣PC was quantified by nanosecond absorption spectroscopy as a function of the applied potential (and hence ‒Δ G °). Specific conditions of applied potential were identified where the kinetics were sensitive to the incident irradiance. A layer-by-layer method was used to insert ionic methylene bridge(s) between the PC and the oxide surface. Marcus-Gerischer analysis of the kinetic data indicates non-adiabatic interfacial electron transfer with total reorganization energies that increase when bridges were placed between the photocatalyst and the ITO surface.

Bangle, Rachel E.↗
DOE OSTI2018

Surface Science Studies of Nano-crystalline Metal Oxide and Metal-Metal Oxide Core-Shell Catalysts

In this project we are bridging the materials gap between fundamental surface science studies of metal-oxide, single-crystal model catalysts, and high surface catalysts that are used industrially by measuring structure-activity relationships for thin films of well-defined, metal oxide nanoparticles. We are concentrating on systems that are of interest for use as catalysts for complete-, selective- and photo-oxidation of organic oxygenates and the research program builds upon our group’s extensive experience in using surface-sensitive spectroscopic techniques to elucidate structure-activity relationships for oxide surfaces. The goals of this work are (1) determine the role that highly undercoordinated edge and corner sites play in catalysis on oxides, (2) determine if control of oxide nano-crystalline size and shape can be used to design highly active and selective catalysts for specific reactions, and (3) determine how crystallite size and shape affect the photocatalytic properties of semiconducting oxides such as TiO 2 . In addition to our current studies of nanocrystalline oxides, the research program will also include studies of hierarchal structured core-shell materials in which a metal nanoparticle is encased in a porous nano-crystalline oxide shell. Such materials have interesting catalytic properties and our goal will be to use these unique model systems to study synergistic interactions between a metal and a reducible metal oxide support. The work during the second year of the grant has focused on the catalytic and photocatalytic activity of thin films of well-defined TiO 2 nanocrystals that have a truncated bi-pyramidal shape. An overview of this work is given below.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

Cryogenic Carbon Monoxide Oxidation on Cuprous Oxide

Performing oxidation reactions at low temperatures using earth-abundant materials is crucial for advancing solutions for sustainable chemistry. CO oxidation serves as a benchmark reaction to characterize oxidation and to advance fundamental concepts in surface chemistry. While there are several examples of CO oxidation occurring on metal oxides at low temperatures, from 300 K to ∼200 K, reactivity in the cryogenic temperature regime typically requires a metal nanoparticle on a metal oxide. Here, we show oxygen atoms on the (111) facet of Cu 2 O react with CO to form CO 2 at temperatures below 100 K. Combining spectroscopic experimental evidence with calculations, we propose a low barrier path for CO oxidation at reconstructed surface sites on Cu 2 O(111). This finding is a rare example of an earth-abundant metal oxide, in this case copper, that can provide highly reactive multifunctional sites, enabling both adsorption and reaction fundamental steps toward the efficient heterogeneous oxidation of chemicals.

36 MATERIALS SCIENCE↗
DOE OSTI2019

MIS High-Purity Uranium/Plutonium Oxide Metal Oxidation Product SCP711-56 (SSR135): Final Report

A high-purity uranium/plutonium mixed oxide material from the Material Identification and Surveillance (MIS) Program inventory has been studied with regard to gas generation and corrosion in a storage environment. Sample SCP711-56 represents process plutonium oxides from mixed oxides at the Hanford Site, byproduct plutonium/uranium mixed oxides at the Rocky Flats Plant, Hanford Site mixed oxides at Savannah River, mixed oxides from alloy oxidation at Savannah River, scrap mixed oxides at Savannah River and plutonium/uranium oxide at Los Alamos National Laboratory that are currently stored in 3013 containers. After calcination to 950°C the material contains 17% fuel grade plutonium and 68% uranium with approximately 1.5% impurities and the remainder principally oxygen. This study followed over time the gas pressure of a sample with nominally 0.1 wt% water in a sealed container with an internal volume scaled to 1/500th of the volume of a 3013 container. Gas compositions were measured periodically over approximately 4 years. The maximum observed gas pressure was 115 kPa. The increase over the initial pressure of 83 kPa was primarily due to generation of carbon dioxide and nitrogen gases. A small amount of hydrogen was generated and oxygen was consumed. At the completion of the study, the internal components of the sealed container showed signs of corrosion, including pitting.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

In-situ ETEM study of plasma-facing tungsten nanofuzz oxidation at atmospheric pressure: Microstructure evolution and substrate-free oxidation kinetics

To enable sustainable carbon-free fusion energy, managing reactor structural material degradation during normal operation as well as accident scenarios is vital. Tungsten (W) plasma-facing materials (PFMs) are susceptible to aggressive high-temperature oxidation during air-ingress fusion reactor accidents, yet there's a lack of oxidation kinetic data for irradiated tungsten. Here, in this study, we utilize atmospheric environmental transmission electron microscopy (ETEM) to present the first kinetic data for substrate-free W nanofuzz oxidation at 400 ºC and 500 ºC in 1 bar dry air. Comparison with pristine bulk W during the early parabolic stage suggests an irradiationdecelerated oxidation for W nanofuzz. Our time-resolved in-situ characterization reveals a durable amorphous surface oxide, likely promoted by high-flux He + irradiation-induced surface defects, serving as an effective passivating layer that impedes nanofuzz oxidation onset. This surface oxide layer also interfaces well with newly formed orthorhombic WO 3 , facilitated by stress relief through He bubble shrinkage, providing lasting passivating protection throughout the nanofuzz parabolic oxidation. This new finding challenges conventional notions of irradiation's negative impact on metal oxidation, and calls for advanced characterization to enhance our understanding of fusion energy materials degradation, informed by further accident modeling.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Step-by-step synthesis of iron-oxide nanoparticles attached to graphene oxide: A study on the composite properties and architecture

Highlights: • Iron oxide NPs and graphene oxide nanocomposites were successfully prepared. • Reduced graphene oxide nanocomposites are obtained after treating with hydrazine. • NPs tend to agglomerate and form bundle-like structures when concentration increases. • Magnetic properties are affected by the NPs concentration and the reduction process. - Abstract: A set of nanocomposites made of iron oxide nanoparticles covalently bonded to graphene oxide and reduced graphene oxide was successfully prepared. The synthesis was carried out in a precise step-by-step process in order to carefully control the nanocomposite formation. The nanocomposites were characterized by a range of techniques to verify the components arrangement according to the proposed strategy. Over the different samples, an in-depth study by Small Angle X-Ray Scattering (SAXS) and DC-Magnetometry was accomplished to analyze in detail the structure and properties of the systems. The results from this work indicate that the increase of the nanoparticle to graphene oxide ratio and the chemical reduction from graphene oxide to reduced graphene oxide modify the spatial distribution and the architecture of the nanoparticles over the sheets, leading to the formation of localized assemblies and bundle-like structures that have a significant impact on the macroscopicmagnetic behavior.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2023

Multi–length scale characterization of point defects in thermally oxidized, proton irradiated iron oxides

A key for the success of safe nuclear power generation system is to consider structural materials that are economical, meet mechanical property needs, possess good corrosion resistance, and are radiation tolerant. Nevertheless, fundamental insights that elucidate the details of radiation damage on materials corrosion performance are lacking. This includes the behavior of surface oxides which often regulate corrosion. For example, it is unclear how non-equilibrium point defects, oxide structure, mass transport in oxides, and subsequent oxidation behavior are altered by the radiation. Here, in this work, some of the effects of proton irradiation on the attributes of point defects, iron oxide microstructures, and the physical nature of the oxidation product were correlated with corrosion behavior. Iron oxides, fabricated by thermal oxidation in air at 400°C and 800°C for 1 h, were subjected to 200 keV, 0.03 dpa (displacements per atom) of proton irradiation, and subjected to corrosion reactivity assessment using AC and DC electrochemical methods. Experimental methods that target materials information at different length scales, such as positron annihilation spectroscopy (atomistic), transmission electron microscopy (mesoscopic), and electrochemical methods (macroscopic), were coupled to shed light on the impact of radiation-induced defect modifications and structural changes in oxides on corrosion reactivity which ultimately affects durability in harsh environments.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Evaluating transition metal oxides within DFT-SCAN and SCAN + U frameworks for solar thermochemical applications

Using the strongly constrained and appropriately normed (SCAN) and SCAN+U approximations for describing electron exchange-correlation (XC) within density functional theory, we investigate the oxidation energetics, lattice constants, and electronic structure of binary Ce-, Mn-, and Fe-oxides, which are crucial ingredients for generating renewable fuels using two-step, oxide-based, solar thermochemical reactors. Unlike other common XC functionals, we find that SCAN does not over-bind the O 2 molecule, based on direct calculations of its bond energy and robust agreement between calculated formation enthalpies of main group oxides versus experiments. However, in the case of transition-metal oxides (TMOs), SCAN systematically overestimates (i.e., yields too negative) oxidation enthalpies due to remaining self-interaction errors in the description of their ground-state electronic structure. Adding a Hubbard U term to the transition-metal centers, where the magnitude of U is determined from experimental oxidation enthalpies, significantly improves the qualitative agreement and marginally improves the quantitative agreement of SCAN+U-calculated electronic structure and lattice parameters, respectively, with experiments. Importantly, SCAN predicts the wrong ground-state structure for a few oxides, namely, Ce 2 O 3 , Mn 2 O 3 , and Fe 3 O 4 , while SCAN+U predicts the right polymorph for all systems considered in this work. Furthermore, the SCAN+U framework, with an appropriately determined U, will be required to accurately describe ground-state properties and yield qualitatively consistent electronic properties for most transition-metal and rare earth oxides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2014

Effect of the introduction of oxide ion vacancies into cubic fluorite-type rare earth oxides on the NO decomposition catalysis

Cubic fluorite-type solid solutions based on Pr{sub 6}O{sub 11} and CeO{sub 2} were synthesized and oxide anion vacancies were intentionally introduced into the cubic fluorite-type lattice through the charge compensating mechanism by Mg{sup 2+} and/or Ca{sup 2+} doping into their lattices. The oxide anion vacancies bring about positive effect on NO decomposition catalysis. The reason for the increase in the catalytic activity was attributed to defect fluorite-type structures close to the C-type cubic one, because C-type cubic rare earth oxides, in which one-quarter of the oxygen atoms in the fluorite-type structure are removed, show high NO decomposition activity. In particular, the positive effect of the formation of oxide anion vacancies was significant for Pr{sub 6}O{sub 11} and its solid solutions, because the molar volume of Pr{sub 6}O{sub 11} is larger than that of CeO{sub 2}, and Pr{sub 6}O{sub 11} contains Pr{sup 3+} as well as Pr{sup 4+} and thereby a small amount of oxide anion vacancies exist inherently in the lattice. - Graphical abstract: Oxide anion vacancies intentionally introduced into the cubic fluorite-type lattice bring about positive effect on NO decomposition catalysis. - Highlights: • Cubic fluorite-type solid solutions were synthesized. • Oxide anion vacancies were intentionally introduced into the cubic fluorite-type lattice. • The oxide anion vacancies bring about positive effect on NO decomposition catalysis. • The activity was enhanced by making the structure close to the C-type cubic one.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗