Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Ni”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Electrochemical stability and corrosion behavior of Ni-Cr alloy in molten LiCl-KCl salt

This study investigated the electrochemical properties and potential-dependent stability of Cr(II) and Ni(II) in a eutectic LiCl-KCl molten salt at 500 °C under an argon atmosphere using a three-electrode cell configuration with a glassy carbon working electrode, Ag/Ag + reference electrode, and graphite counter electrode. Cyclic voltammetry was employed to characterize the Cr(0)/Cr(II)/Cr(III) and Ni(0)/Ni(II) redox transitions, yielding diffusion coefficients of 0.50 (±0.01) × 10 −5 cm 2 s −1 for Cr(II) and 0.91 (±0.16) × 10 −5 cm 2 s −1 for Ni(II) at 500 °C. The redox stability domains of these species provided insight into the corrosion mechanisms of a Ni-Cr alloy (80–20 wt %) in LiCl-KCl salt. The measured open circuit potential of the alloy corresponded to the range of potentials where the Ni(0) and Cr(II) species are stable, indicating a preferential dissolution of Cr. Immersion testing of the alloy for 336 h confirmed significant Cr depletion (or Ni-enrichment) at the surface layer, corroborating Cr dealloying as the dominant corrosion reaction under open circuit conditions. Additionally, the application of a small anodic overpotential (0.11 V) resulted in selective Cr dissolution while a large anodic overpotential (0.25 V) resulted in co-dissolution of both Cr and Ni. Furthermore, these results demonstrate that the corrosion mechanisms of a Ni-Cr alloy in LiCl-KCl depend upon the applied potential, and thus the redox conditions of the molten salt should be carefully controlled in the design of a redox buffer to mitigate corrosion in molten salt environments.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2020

Understanding the Origin of Highly Selective CO 2 Electroreduction to CO on Ni,N‐doped Carbon Catalysts

Abstract Ni,N‐doped carbon catalysts have shown promising catalytic performance for CO 2 electroreduction (CO 2 R) to CO; this activity has often been attributed to the presence of nitrogen‐coordinated, single Ni atom active sites. However, experimentally confirming Ni−N bonding and correlating CO 2 reduction (CO 2 R) activity to these species has remained a fundamental challenge. We synthesized polyacrylonitrile‐derived Ni,N‐doped carbon electrocatalysts (Ni‐PACN) with a range of pyrolysis temperatures and Ni loadings and correlated their electrochemical activity with extensive physiochemical characterization to rigorously address the origin of activity in these materials. We found that the CO 2 R to CO partial current density increased with increased Ni content before plateauing at 2 wt % which suggests a dispersed Ni active site. These dispersed active sites were investigated by hard and soft X‐ray spectroscopy, which revealed that pyrrolic nitrogen ligands selectively bind Ni atoms in a distorted square‐planar geometry that strongly resembles the active sites of molecular metal–porphyrin catalysts.

Koshy, David M.↗
DOE OSTI2026

Dehydration Pathway Study of Ultrathin Ni (OH) 2 Probed via In Situ X-Ray Photoelectron Spectromicroscopy

In this work, the conversion of ultrathin 2D-Ni (OH) 2 to NiO is studied using in situ X-ray absorption near edge spectroscopy at the Ni L 3 and O K edges and using variable photon energy X-ray photoelectron spectroscopy at the Ni 2p 3/2 and O 1s edges. The Ni L 3 X-ray absorption spectroscopy and corresponding 2p 3/2 X-ray photoelectron spectroscopy show the oxidation state of the Ni atom to be Ni 2+ in the course of the reaction; however, the film surface and oxygen defect structure show the presence of a large metallic Ni component before the complete disappearance of the hydroxide phase indicating oxygen vacancy formation before the completion of water desorption. O 1s spectral changes during heat treatment under ultrahigh vacuum, O 2 dosing, and H 2 O dosing suggest the spectral features are due to water desorption and adsorption. Furthermore, by comparing the relative probe depths of X-ray photoelectron spectroscopy and X-ray absorption spectroscopy, it is determined that the surface, at each step in the dehydration process, consists of a combination of Ni, NiO, and Ni (OH) 2 phases, which each contain a mixture of adsorbed hydroxyl groups. Repeated dosing with H 2 O, studied with O 1s X-ray photoelectron spectroscopy, suggests that the dissociation of water facilitates the formation of oxygen vacancies.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Discovery of a Ferromagnetic Nickel Chalcogenide Nanocluster Ni 3 S 3 H(PEt 3 ) 5

Atomically precise ligated nanoclusters (NC) are promising cluster-based materials with novel molecular architectures and tunable magnetic properties. Herein, the synthesis and characterization of a nickel sulfide NC Ni 3 S 3 H(PEt 3 ) 5 (PEt 3 = triethylphosphine) with distinct magnetic properties are reported. Magnetization measurements reveal its magnetic moment of 1.5 µ B in the solid phase, consistent with the existence of one unpaired electron predicted by density functional theory (DFT) calculations. Additionally, experimental measurements indicate the presence of ferromagnetic ordering within each Ni 3 S 3 H(PEt 3 ) 5 NC and strong coercivity at temperatures below 20 K. Ion mobility-mass spectrometry is employed in conjunction with DFT calculations and collision cross-section simulations to investigate the structure of the isolated Ni 3 S 3 H(PEt 3 ) 5 . Theoretical studies show that [Ni 3 S 3 H(PEt 3 ) 5 ] + has a planar Ni 3 S 3 core where three Ni atoms are arranged in a triangle with three bridging S atoms residing in the same plane. This structure is preserved in both solution and solid phases, which is confirmed by spectroscopic studies of Ni 3 S 3 H(PEt 3 ) 5 . Additionally, DFT calculations indicate that all spins at the Ni sites are aligned parallel, confirming the presence of ferromagnetic coupling. Overall, this study provides key insights into the structure and magnetic properties of Ni 3 S 3 H(PEt 3 ) 5 , which will facilitate the design of new NC-based magnetic materials.

Nickel sulfide nanocluster↗
DOE OSTI2026

Ab initio thermodynamics of Ni and Co incorporation in Mg hydroxide, carbonate, and hydroxycarbonate minerals

Ni and Co are critical elements needed for modern technologies, and a better understanding of the ability of Mg-based minerals to incorporate these elements would benefit strategy development for Ni and Co recovery from mafic and ultramafic deposits. Here, in this work, we performed density functional theory (DFT) calculations of Ni and Co incorporation in six potential products of the carbonation of mafic and ultramafic silicates: brucite (Mg(OH) 2 ), magnesite (MgCO 3 ), nesquehonite (MgCO 3 ⸱3H 2 O), lansfordite (MgCO 3 ⸱5H 2 O), artinite (Mg 2 CO 3 (OH) 2 ⸱3H 2 O), and hydromagnesite (Mg 5 (CO 3 ) 4 (OH) 2 ⸱4H 2 O). The DFT results were used in an ab initio thermodynamics framework to explore the pH 2 O–pCO 2 conditions at which the Mg-based minerals were predicted to be thermodynamically stable and to quantify the Gibbs free energy of Ni and Co substitution at Mg sites. Among the six Mg-based minerals, brucite and magnesite were predicted to have the lowest Ni and Co substitution free energy. An analysis of the effect of temperature indicated that, at low temperature (<100 K), brucite more readily accommodated Ni and Co, while, at higher temperature (>335 K), magnesite more favorably incorporated Ni and Co. Between 100 K and 335 K, Ni was predicted to preferentially substitute for Mg in brucite and Co for Mg in magnesite, thus leading to a driving force for separating Ni and Co in conditions where brucite and magnesite both form. Insights gained in this work could therefore help select experimental conditions that either promote or inhibit incorporation of these critical elements into Mg-based mineral phases.

Critical elements↗
DOE OSTI2020

Identification of highly active surface iron sites on Ni(OOH) for the oxygen evolution reaction by atomic layer deposition

Atomic layer deposition (ALD) has become a versatile tool in catalysis, allowing for precise synthesis of catalysts useful for gaining fundamental understanding of complex systems. In this work, ALD was used to perform surface-directed modification of Ni(OH) 2 /Ni(OOH) electrocatalysts for the oxygen evolution reaction (OER) to elucidate the different roles of iron as a surface dopant and as iron distributed throughout the NiOOH structure. Electrochemical and material characterization of FeO x ALD-modified Ni(OH) 2 indicates that iron is deposited on the surface of Ni(OH) 2 sheets without modifying its bulk properties. Sub-monolayer amounts of iron were deposited on the surface of Ni(OH) 2 using low cycle numbers of ALD. This surface iron results in high OER activity, characteristic of Ni-Fe(OOH) catalysts. Ni(OH) 2 /Ni(OOH) catalysts modified to incorporate iron throughout the structure were prepared by depositing large cycle numbers of FeO x ALD, which results in the deposition of a Fe 2 O 3 overlayer. Corrosion of this Fe 2 O 3 overlayer during electrochemical cycling in alkaline electrolyte leads to the incorporation of iron throughout the structure of Ni(OH) 2 /Ni(OOH) while leaving some Fe at the surface. Incorporation of iron throughout the Ni(OH) 2 /Ni(OOH) structure was found to increase OER geometric activity for thick, high surface area Ni(OH) 2 /Ni(OOH) catalysts. Lastly, NiFeO x electrocatalysts synthesized fully by ALD were investigated for the OER; these catalysts demonstrated high OER activity and potential for photocatalysis applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Metallic Technetium Sequestration in Nickel Core/Shell Microstructure during Fe(OH)2 Transformation with Ni doping

This study investigates the impacts of Ni doping on technetium-99 (Tc) sequestration in aqueous solutions through transformation of Fe(OH)2(s) to iron spinel (magnetite) under alkaline conditions. Extensive solid characterization was performed for the mineral phases produced, as well as the Tc/Ni speciation and distribution within these phases. X-ray diffraction results show that iron spinel was the dominant mineral product without detectable Ni incorporation. The doped Ni ions mainly precipitated as fine Fe/Ni oxide/hydroxide particles, including strongly reduced nanometer?sized spheroidal Ni-rich and metallic Ni phases. High-resolution analytical scanning transmission electron microscopy using energy dispersive X-ray spectroscopy and electron energy loss spectroscopy on the produced solid samples (focused ion beam-prepared specimens) revealed three Tc distribution domains dominated by nanocrystals and, especially, a Tc-rich metallic phase. Instances of metallic Tc were specifically found in spheroidal, Ni-rich and metallic nanoparticles exhibiting a core/shell microstructure that suggests strong reduction and sequential precipitation of Ni-Tc-Ni. Mass balance analysis showed nearly 100% Tc removal from the 4.8 × 10-4 M Tc solutions. The finding of the metallic Tc encapsulation indicates that Tc sequestration through Ni-doped Fe(OH)2(s)?to?iron spinel transformation process likely provides an alternative treatment pathway for Tc removal and could be combined into further waste treatment approaches.

Wang, Guohui↗
DOE OSTI2020

3 d-d Excited States of Ni(II) Complexes Relevant to Photoredox Catalysis: Spectroscopic Identification and Mechanistic Implications

Synthetic organic chemistry has seen major advances due to the merger of nickel and photoredox catalysis. A growing number of Ni-photoredox reactions are proposed to involve generation of excited nickel species, sometimes even in the absence of a photoredox catalyst. To gain insights about these excited states, two of our groups previously studied the photophysics of Ni( t-Bu bpy)(o-Tol)Cl, which is representative of proposed intermediates in many Ni-photoredox reactions. This complex was found to have a long-lived excited state (τ = 4 ns), which was computationally assigned as a metal-to-ligand charge transfer (MLCT) state with an energy of 1.6 eV (38 kcal/mol). This work evaluates the computational assignment experimentally using a series of related complexes. Ultrafast UV–Vis and mid-IR transient absorption data suggest that a MLCT state is generated initially upon excitation but decays to a long-lived state that is 3 d-d rather than 3 MLCT in character. Dynamic cis,trans-isomerization of the square planar complexes was observed in the dark using 1 H NMR techniques, supporting that this 3 d-d state is tetrahedral and accessible at ambient temperature. Through a combination of transient absorption and NMR studies, the 3 d-d state was determined to lie ~0.5 eV (12 kcal/mol) above the ground state. Because the 3 d-d state features a weak Ni–aryl bond, the excited Ni(II) complexes can undergo Ni homolysis to generate aryl radicals and Ni(I), both of which are supported experimentally. Thus, photoinduced Ni–aryl homolysis offers a novel mechanism of initiating catalysis by Ni(I).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

The structure of the high-affinity nickel-binding site in the Ni,Zn-HypA•UreE2 complex

Abstract The maturation pathway for the nickel-dependent enzyme urease utilizes the protein UreE as a metallochaperone to supply Ni(II) ions. In Helicobacter pylori urease maturation also requires HypA and HypB, accessory proteins that are commonly associated with hydrogenase maturation. Herein we report on the characterization of a protein complex formed between HypA and the UreE2 dimer. Nuclear magnetic resonance (NMR) coupled with molecular modelling show that the protein complex apo, Zn-HypA•UreE2, forms between the rigorously conserved Met-His-Glu (MHE motif) Ni-binding N-terminal sequence of HypA and the two conserved His102A and His102B located at the dimer interface of UreE2. This complex forms in the absence of Ni(II) and is supported by extensive protein contacts that include the use of the C-terminal sequences of UreE2 to form additional strands of β-sheet with the Ni-binding domain of HypA. The Ni-binding properties of apo, Zn-HypA•UreE2 and the component proteins were investigated by isothermal titration calorimetry using a global fitting strategy that included all of the relevant equilibria, and show that the Ni,Zn-HypA•UreE2 complex contains a single Ni(II)-binding site with a sub-nanomolar KD. The structural features of this novel Ni(II) site were elucidated using proteins produced with specifically deuterated amino acids, protein point mutations, and the analyses of X-ray absorption spectroscopy, hyperfine shifted NMR features, as well as molecular modeling coupled with quantum-mechanical calculations. The results show that the complex contains a six-coordinate, high-spin Ni(II) site with ligands provided by both component proteins.

Zambelli, Barbara (ORCID:0000000238760051)↗
DOE OSTI2024

Prediction of s ± -Wave Superconductivity Enhanced by Electronic Doping in Trilayer Nickelates La 4 Ni 3 O 10 under Pressure

Motivated by the recently reported signatures of superconductivity in trilayer La 4 ⁢Ni 3 ⁢O 10 under pressure, here we comprehensively study this system using ab initio and random-phase approximation techniques. Without electronic interactions, the Ni d 3z 2 –r 2 orbitals show a bonding-antibonding and nonbonding splitting behavior via the O p z orbitals inducing a “trimer” lattice in La 4⁢ Ni 3 ⁢O 10 , analogous to the dimers of La 3 ⁢Ni 2 ⁢O 7 . The Fermi surface consists of three electron sheets with mixed e g orbitals, and a hole and an electron pocket made up of the d 3⁢z 2 –r 2 orbital, suggesting a Ni two-orbital minimum model. In addition, we find that superconducting pairing is induced in the s ± -wave channel due to partial nesting between the M = (π,π) centered pockets and portions of the Fermi surface centered at the Γ = (0,0) point. With changing electronic density n, the s ± instability remains leading and its pairing strength shows a domelike behavior with a maximum around n = 4.2 ( ~6.7% electron doping). The superconducting instability disappears at the same electronic density as that in the new 1313 stacking La 3 ⁢Ni 2 ⁢O 7 , correlated with the vanishing of the hole pocket that arises from the trilayer sublattice, suggesting that the high-T c superconductivity of La 3⁢ Ni 2 ⁢O 7 does not originate from a trilayer and monolayer structure. Furthermore, we confirm the experimentally proposed spin state in La 4 ⁢Ni 3 ⁢O 10 with an in-plane (π, π) order and antiferromagnetic coupling between the top and bottom Ni layers, and spin zero in the middle layer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1975

Directionally solidified pseudo-binary eutectics of Ni-Cr-(Hf, Zr)

A pseudo-binary eutectic, in which the intermetallic Ni7Hf2 reinforces the Ni-Cr solid solution phase, was previously predicted in the Ni-Cr-Hf system by a computer analysis. The experimental determination of pseudo binary eutectic compositions and the directional solidification of the Ni-Cr-Hf, Zr, and Ni-Cr-Zr eutectic alloys are discussed. To determine unknown eutectics, chemical analyses were made of material bled from near eutectic ingots during incipient melting. Nominal compositions in weight percent of Ni-18.6Cr-24.0HF, Ni19.6Cr-12.8Zr-2.8Hf, and Ni-19.2Cr-14.8Zr formed aligned pseudo-binary eutectic structures. The melting points were about 1270 C. The reinforcing intermetallic phases were identified as noncubic (Ni,Cr)7Hf2 and (Ni,Cr)7(Hf,Zr)2, and face centered cubic (Ni,Cr)5Zr. The volume fraction of the reinforcing phases were about 0.5.

Kim, Y. G.↗
NASA NTRS2005

The Effect of Metal Composition on Fe-Ni Partition Behavior between Olivine and FeNi-Metal, FeNi-Carbide, FeNi-Sulfide at Elevated Pressure

Metal-olivine Fe-Ni exchange distribution coefficients were determined at 1500 C over the pressure range of 1 to 9 GPa for solid and liquid alloy compositions. The metal alloy composition was varied with respect to the Fe/Ni ratio and the amount of dissolved carbon and sulfur. The Fe/Ni ratio of the metal phase exercises an important control on the abundance of Ni in the olivine. The Ni abundance in the olivine decreases as the Fe/Ni ratio of the coexisting metal increases. The presence of carbon (up to approx. 3.5 wt.%) and sulfur (up to approx. 7.5 wt.%) in solution in the liquid Fe-Ni-metal phase has a minor effect on the partitioning of Fe and Ni between metal and olivine phases. No pressure dependence of the Fe-Ni-metal-olivine exchange behavior in carbon- and sulfur-free and carbon- and sulfur-containing systems was found within the investigated pressure range. To match the Ni abundance in terrestrial mantle olivine, assuming an equilibrium metal-olivine distribution, a sub-chondritic Fe/Ni-metal ratio that is a factor of 17 to 27 lower than the Fe/Ni ratios in estimated Earth core compositions would be required, implying higher Fe concentrations in the core forming metal phase. A simple metal-olivine equilibrium distribution does not seem to be feasible to explain the Ni abundances in the Earth's mantle. An equilibrium between metal and olivine does not exercise a control on the problem of Ni overabundance in the Earth's mantle. The experimental results do not contradict the presence of a magma ocean at the time of terrestrial core formation, if olivine was present in only minor amounts at the time of metal segregation.

Holzheid, Astrid↗
DOE OSTI2024

Modeling Ni Coarsening under Humid Atmosphere in the Electrode of Solid Oxide Cells

Ni coarsening is an important degradation mechanism in solid oxide cells. It is reported that Ni coarsening is faster under a humid atmosphere experimentally, but the underline mechanism is not well understood. In this work, Ni coarsening through Ni(OH)x surface diffusion was investigated by a combination of density-functional theory (DFT) and phase-field modeling (PFM). DFT is used to evaluate the surface coverage and diffusivity of Ni(OH)x on Ni (111) surface and the results are used as an input to the PFM to simulate Ni coarsening under humid atmospheres on both reconstructed and synthetic microstructures. It is found that steam partial pressure and microstructure effect alone cannot explain the faster Ni coarsening under a humid atmosphere observed experimentally. Large local overpotential in fuel cell mode is needed to explain the fast Ni coarsening.

Lei, Yinkai↗
DOE OSTI2020

Materials Data on Ni(TePd)2 by Materials Project

Pd2NiTe2 crystallizes in the orthorhombic Ibam space group. The structure is three-dimensional. Pd is bonded in a 10-coordinate geometry to three equivalent Pd, two equivalent Ni, and five equivalent Te atoms. There are one shorter (2.93 Å) and two longer (3.09 Å) Pd–Pd bond lengths. Both Pd–Ni bond lengths are 2.93 Å. There are a spread of Pd–Te bond distances ranging from 2.67–3.03 Å. Ni is bonded in a 10-coordinate geometry to four equivalent Pd, two equivalent Ni, and four equivalent Te atoms. Both Ni–Ni bond lengths are 2.58 Å. All Ni–Te bond lengths are 2.54 Å. Te is bonded in a 7-coordinate geometry to five equivalent Pd and two equivalent Ni atoms.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Materials Data on Ni(XeF8)2 by Materials Project

XeF5XeNiF11 crystallizes in the orthorhombic Pbca space group. The structure is zero-dimensional and consists of eight XeF5 clusters and four XeNiF11 clusters. In each XeF5 cluster, Xe is bonded in a 5-coordinate geometry to five F atoms. There are a spread of Xe–F bond distances ranging from 1.98–2.00 Å. There are five inequivalent F sites. In the first F site, F is bonded in a single-bond geometry to one Xe atom. In the second F site, F is bonded in a single-bond geometry to one Xe atom. In the third F site, F is bonded in a single-bond geometry to one Xe atom. In the fourth F site, F is bonded in a single-bond geometry to one Xe atom. In the fifth F site, F is bonded in a single-bond geometry to one Xe atom. In each XeNiF11 cluster, Xe is bonded in a 5-coordinate geometry to eight F atoms. There are a spread of Xe–F bond distances ranging from 1.97–2.59 Å. Ni is bonded in an octahedral geometry to six F atoms. There are a spread of Ni–F bond distances ranging from 1.80–1.82 Å. There are eleven inequivalent F sites. In the first F site, F is bonded in a single-bond geometry to one Xe atom. In the second F site, F is bonded in a single-bond geometry to one Xe atom. In the third F site, F is bonded in a single-bond geometry to one Ni atom. In the fourth F site, F is bonded in a single-bond geometry to one Ni atom. In the fifth F site, F is bonded in a single-bond geometry to one Xe and one Ni atom. In the sixth F site, F is bonded in a single-bond geometry to one Xe atom. In the seventh F site, F is bonded in a single-bond geometry to one Xe atom. In the eighth F site, F is bonded in a single-bond geometry to one Xe atom. In the ninth F site, F is bonded in a single-bond geometry to one Xe and one Ni atom. In the tenth F site, F is bonded in a distorted single-bond geometry to one Xe and one Ni atom. In the eleventh F site, F is bonded in a single-bond geometry to one Ni atom.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Materials Data on Ni(ClO)2 by Materials Project

Ni(OCl)2 crystallizes in the monoclinic C2/m space group. The structure is one-dimensional and consists of two Ni(OCl)2 ribbons oriented in the (0, 1, 0) direction. Ni is bonded to two equivalent O and four Cl atoms to form distorted edge-sharing NiCl4O2 octahedra. Both Ni–O bond lengths are 1.78 Å. There are two shorter (2.31 Å) and two longer (2.38 Å) Ni–Cl bond lengths. O is bonded in a single-bond geometry to one Ni atom. There are two inequivalent Cl sites. In the first Cl site, Cl is bonded in an L-shaped geometry to two equivalent Ni atoms. In the second Cl site, Cl is bonded in an L-shaped geometry to two equivalent Ni atoms.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Acid Etching‐Driven Self‐Assembly of Mn‐Shell Inducing Rock‐Salt Phase for Enhanced Single‐Crystal Ni‐Rich Cathodes

With the wide adoption of Li‐ion batteries, Ni‐rich cathode is considered as one of the most promising candidates of cathodes due to its high energy density and low cost. However, stability decreased with increasing Ni content in the Ni‐rich cathode. To solve this bottleneck, many strategies, such as coating, doping, surface modification, and special morphologies, have been developed. Herein, we introduce a groundbreaking approach for enhancing Ni‐rich cathode through an innovative acid etching process that promotes Mn shell self‐assembly, inducing a rock‐salt phase on the surface. This method not only simplifies the Ni‐rich cathode modification process, but also significantly improves the structural stability and electrochemical performance of Ni‐rich cathode. Our findings demonstrate that developed single‐crystal Ni‐rich cathode shows 3–34 % better stability compared to both commercial modified Ni‐rich cathode and unmodified counterparts. The unique Mn shell effectively mitigates reversible phase shifts during cycling, contributing to a remarkable enhancement in cycling stability. Additionally, this novel fabrication technique paves the way for cost‐effective production of high‐performance cathode materials, offering substantial benefits for lithium‐ion battery technology. And this study proves the potential of this method in advancing the design and development of durable, high‐capacity cathode materials for next‐generation batteries.

Ni-rich cathode↗
DOE OSTI2025

Selectivity of tris complexation for Ni(II), Co(II), and Fe(II) and its effect on carbonate precipitation under alkaline conditions

Simultaneous critical element recovery and ex-situ carbon mineralization of low-grade ultramafic deposits have garnered increasing interest. Understanding the selectivity of metal complexing organic ligands for various divalent metals present in ultramafic rocks during carbonate mineralization is required to optimize this process. Here we evaluate 2-amino-2-(hydroxymethyl)-1,3-propanediol (i.e., Tris) as a model for bidentate ligands that bind divalent metals with both amine and alcohol groups in alkaline conditions (pH 8–10.5) at 25 °C and 80 °C in carbonate-buffered solutions. Protonated Tris forms a stronger complex with metal ions and is selective for trace metals with Ni(II) > Co(II) > Fe(II) during carbonate precipitation, with the rates decreasing but selectivity increasing at lower temperature and lower pH. At 25 °C, metastable amorphous hydrated carbonates form, regardless of the amount of Tris present or pH values. At 80 °C and pH 8, the Co and Fe carbonates that form are a mixture of rosasite-group minerals (Co 2 CO 3 (OH) 2 (H 2 O) and Fe 2 CO 3 (OH) 2 ) and pure carbonates (sphaerocobaltite: CoCO 3 and siderite: FeCO 3 ), with the latter more stabilized with increasing Tris concentration. In mixed metal solutions without Tris at 25 °C where Fe:Ni or Fe:Co is 2:1, Fe increases the rates of Ni or Co carbonate precipitation. However, with increasing Tris concentration the presence of Ni or Co inhibits Fe carbonate precipitation. At 80 °C without Tris, Ni or Co substitute into the iron chukanovite (Fe 2 CO 3 (OH) 2 ) lattice, increasing Ni or Co carbonate precipitation rates. Increasing Tris concentration only slightly inhibits Fe and Co precipitation, but slows Ni precipitation up to 10 times, with Fe progressively partitioning into more pure carbonate phases with distinct crystalline morphologies. These findings suggest bidentate amine-bearing ligands may be effective at Ni and Co recovery during carbon mineralization of Fe-bearing ultramafic deposits at relatively low temperatures and slightly alkaline pH.

54 ENVIRONMENTAL SCIENCES↗