Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Neutron diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

First Examination of Irradiated Fuel with Pulsed Neutrons at LANSCE (Preliminary Results)

We present preliminary results on the characterization of an irradiated U-lOZr-lPd fuel sample that was prepared from the irradiated AFC-3A-R5A sample. U-lOZr metallic fuels are researched as host materials for potential transmutation fuels and the addition of palladium strives to bind lanthanides, thus preventing fuel-cladding chemical interactions (FCCI). These interactions limit the lifetime of metallic fuels and are caused by migration of lanthanide fission products to the periphery of the fuel slug, where they start to interact with the D9 or HT9 steel cladding, ultimately leading to failure of the mechanical integrity of the cladding. Neutrons offer bulk characterization of irradiated materials for which X-ray tomography methods are not suitable due to the immense gamma background emitted from the samples. In particular pulsed neutrons provide information from the ability to resolve the neutron energy using their time-of-flight and thus the potential to utilize neutron absorption resonance to characterize the spatial distribution of isotopes. This, in turn, may allow to characterize the distribution of fission and neutron capture products non-destructively and may ultimately be applied to the bulk of an irradiation capsule prior to destructive post-irradiation examination to identify regions of interest. To allow the characterization of entire irradiation capsules, a cask is under development in the advanced post-irradiation work package at LANL and progress on this development was reported elsewhere. In parallel, an irradiated U-lOZr-lPd sample cut from the AFC-3AR5A irradiation was shipped to LANL and will be fully characterized with an NSUF funded rapid turnaround experiment (RTE) in the 2020 LANSCE run cycle. The sample emits at a dose rate of ~3R/hr on contact and is therefore manageable with remote handling, without requiring a cask. The disk-shaped material is larger than samples prepared for analysis using electron or X-ray methods and is therefore an intermediate step towards characterization of bulk samples at LANSCE. However, since it covers the full diameter of the irradiated fuel slug, some insight on redistribution of elements, spatially resolved information on microstructure, e.g. phase composition and texture, will be possible using the pulsed neutron-based methods developed for fuel characterization at LANSCE. This report describes the development of procedures to handle the sample at LANSCE as well as preliminary data and results from tests conducted in December 2019 on the energy-resolved neutron imaging (ERNI) beam line at flight path 5 and the high pressure-preferred orientation diffractometer (HIPPO) at LANSCE. This effort is a collaboration between LANL, INL, and ORNL. To compare our capabilities with prior work, we present an overview of previously reported bulk characterization of irradiated or spent fuels. The overview addresses neutron diffraction and neutron absorption resonance spectroscopy, both of which have only few reported applications on irradiated or spent nuclear fuel, as well as neutron radiography. This literature review was already described in a previous report but is repeated here to put our current efforts in context of previous work.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Advanced Materials and Manufacturing Technologies Nondestructive Examination Efforts at Idaho National Laboratory: Report of FY-24 Efforts

This report details FY-24 nondestructive examination (NDE) efforts at Idaho National Laboratory (INL) in support of the Advanced Materials and Manufacturing Technologies (AMMT) program. While the goal of this endeavor is to develop a multi-modal, multi-length scale workflow for nondestructive characterization of advanced manufactured (AM) nuclear reactor components, substantial development remains until this is a reality. In support of this effort X-ray computed tomography (XCT), X-ray diffraction (XRD), neutron computed tomography (nCT), neutron diffraction, lock-in thermography (LIT), multi-point lock-in thermography (MLIT), and positron annihilation spectroscopy (PAS) were all used on AM specimens to examine defects such as voids, porosity, and residual stress. In addition to summarizing the results of these NDE applications, recommendations for integrating these into a more comprehensive undertaking to promote NDE of engineering-scale components are also included.

36 MATERIALS SCIENCE↗
DOE OSTI2021

How Austenitic Is a Martensitic Steel Produced by Laser Powder Bed Fusion? A Cautionary Tale

Accurate phase fraction analysis is an essential element of the microstructural characterization of alloys and often serves as a basis to quantify effects such as heat treatment or mechanical deformation. Additive manufacturing (AM) of metals, due to the intrinsic nonequilibrium solidification and spatial variability, creates additional challenges for the proper quantification of phase fraction. Such challenges are exacerbated when the alloy itself is prone to deformation-induced phase transformation. Using commonly available in-house X-ray diffraction (XRD) and electron backscatter diffraction (EBSD) and less commonly used synchrotron-based high-energy X-ray diffraction, we characterized nitrogen-atomized 17-4 precipitation-hardening martensitic stainless steel, a class of AM alloy that has received broad attention within the AM research community. On the same build, our measurements recovered the entire range of reported values on the austenite phase fractions of as-built AM 17-4 in literature, from ≈100% martensite to ≈100% austenite. Aided by Calphad simulation, our experimental findings established that our as-built AM 17-4 is almost fully austenitic and that in-house XRD and EBSD measurements are subject to significant uncertainties created by the specimen’s surface finish. Hence, measurements made using these techniques must be understood in their correct context. Our results carry significant implications, not only to AM 17-4 but also to AM alloys that are susceptible to deformation-induced structure transformation and suggest that characterizations with less accessible but bulk sensitive techniques such as synchrotron-based high energy X-ray diffraction or neutron diffraction may be required for proper understanding of these materials.

17-4 steel↗
NASA NTRS1993

Thermal stress effects in intermetallic matrix composites

Intermetallic matrix composites develop residual stresses from the large thermal expansion mismatch (delta-alpha) between the fibers and matrix. This work was undertaken to: establish improved techniques to measure these thermal stresses in IMC's; determine residual stresses in a variety of IMC systems by experiments and modeling; and, determine the effect of residual stresses on selected mechanical properties of an IMC. X ray diffraction (XRD), neutron diffraction (ND), synchrotron XRD (SXRD), and ultrasonics (US) techniques for measuring thermal stresses in IMC were examined and ND was selected as the most promising technique. ND was demonstrated on a variety of IMC systems encompassing Ti- and Ni-base matrices, SiC, W, and Al2O3 fibers, and different fiber fractions (Vf). Experimental results on these systems agreed with predictions of a concentric cylinder model. In SiC/Ti-base systems, little yielding was found and stresses were controlled primarily by delta-alpha and Vf. In Ni-base matrix systems, yield strength of the matrix and Vf controlled stress levels. The longitudinal residual stresses in SCS-6/Ti-24Al-llNb composite were modified by thermomechanical processing. Increasing residual stress decreased ultimate tensile strength in agreement with model predictions. Fiber pushout strength showed an unexpected inverse correlation with residual stress. In-plane shear yield strength showed no dependence on residual stress. Higher levels of residual tension led to higher fatigue crack growth rates, as suggested by matrix mean stress effects.

Wright, P. K.↗
DOE OSTI2024

High-pressure synthesis and neutron scattering study of tantalum hydride TaH 1.23(5) and a tantalum polymorph with A15-type structure

A unique type of tantalum hydride was synthesized by exposing tantalum dihydride to the high hydrogen pressure of 9 GPa and a temperature of using toroid-type high-pressure chambers. The samples of this hydride were cooled down to 100 K, recovered to ambient pressure, and studied in a metastable state by hot extraction, powder x-ray and neutron diffraction, and inelastic neutron scattering. X-ray diffraction demonstrated that this hydride had an A15-type crystal structure of metal lattice (space group , Ta atoms at the 2a and 6c Wyckoff positions) and a lattice parameter of a = 5.150(5) Å at T = 85 K. The hydrogen content determined by hot extraction was H/Ta - 1.23(5). Hydrogen desorption during heating the sample in vacuum proceeded in two steps—first, Δ⁢H⁡/Ta=0.2 was desorbed at around -70 °⁢C, and then the rest of the hydrogen was desorbed between 100 ⁢°C and 390 ⁢°⁢C. The A⁢15-type metal lattice was preserved upon hydrogen removal, leaving a unique polymorph of tantalum. Neutron diffraction of A⁢15-TaH 1.23⁢(5) demonstrated that hydrogen atoms occupy the 24⁢k and 16⁢i Wyckoff sites in the crystal structure, and annealing at 250 K resulted in a decrease of the 24⁢k and an increase of the 16⁢i site occupancies. Inelastic neutron scattering revealed four vibrational modes in the fundamental band of A⁢15-TaH 1.23⁢(5) at 72, 135, 145, and 166 meV, the first three and the last one of which were tentatively assigned to the vibrations of H atoms at the 24⁢k and 16⁢i sites, respectively. No superconductivity was found in A⁢15-TaH 1.1 and hydrogen-free A15-Ta at temperatures down to 1.5 K.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Magnetic pair distribution function and half polarized neutron powder diffraction at the HB-2A powder diffractometer

Local magnetic order and anisotropy are often central for understanding fundamental behavior and emergent functional properties in quantum materials and beyond. Advances in neutron powder diffraction experiments and analysis tools now allow for quantitative determination. Here, we demonstrate this here with complementary total neutron scattering and polarized neutron measurements on the HB-2A neutron powder diffractometer at the High Flux Isotope Reactor (HFIR). In recent years, magnetic pair distribution function (mPDF) analysis has emerged as a powerful technique for probing local magnetic spin ordering of magnetic materials. This method can be broadly applied to any magnetic material but is particularly effective for studying systems with short-range magnetic order, such as materials with reduced dimensionality, geometrically frustrated magnets, thermoelectrics, multiferroics, and correlated paramagnets. Magnetic anisotropy often underpins the short-range order adopted. Half-polarized neutron powder diffraction (pNPD) can be used to determine the local susceptibility tensor on the magnetic sites to quantify the magnetic anisotropy. Combining the techniques of mPDF and pNPD can therefore provide valuable insights into local magnetic behavior. A series of measurements optimized for these techniques are presented as exemplar cases focused on frustrated materials where short-range order dominates, these include measurements to ultra-low temperature (<100 mK) not typically accessible for such experiments.

Half polarized neutron scattering↗
DOE OSTI2026

Hydride and Seek: Comparing Crystallographic Hydride Placement Techniques with an Open-Shell Cobalt Complex

Locating hydrides is crucial in organometallic chemistry but difficult to do accurately using X-ray diffraction. Electron diffraction has been proposed as a way to overcome this problem but has not been systematically compared to neutron diffraction and to quantum crystallography (Hirshfeld atom refinement, HAR) to test this hypothesis. Here, we present a comparative analysis of methods for a terminal cobalt hydride complex by comparing a single-crystal neutron diffraction reference structure to results from single-crystal X-ray diffraction with and without Hirshfeld atom refinement (HAR, NoSpherA2), density functional theory (DFT), and electron diffraction (3D-ED/MicroED) refined under kinematical and dynamical formalisms. Conventional X-ray diffraction gives lower precision than neutron diffraction as expected. Despite expected improvements, HAR gives systematic deviation from the neutron benchmark. Interestingly, optimized DFT equilibrium geometries are closer to the neutron value than the value from HAR. On the other hand, electron diffraction with a high-quality data set coupled with dynamical refinement localizes the hydride in difference maps and gives excellent agreement with the neutron data. Dynamical refinement is crucial, as kinematical refinement does not allow assignment of a hydride peak. This cross-modal comparison defines the conditions under which 3D-ED/MicroED delivers high-precision metal–hydride distances for this open-shell cobalt hydride.

anions↗
DOE OSTI2023

Large Destabilization of (TiVNb)-Based Hydrides via (Al, Mo) Addition: Insights from Experiments and Data-Driven Models

High-entropy alloys (HEAs) represent an interesting alloying strategy that can yield exceptional performance properties needed across a variety of technology applications, including hydrogen storage. Examples include ultrahigh volumetric capacity materials (BCC alloys → FCC dihydrides) with improved thermodynamics relative to conventional high-capacity metal hydrides (like MgH 2 ), but still further destabilization is needed to reduce operating temperature and increase system-level capacity. Here, in this work, we demonstrate efficient hydride destabilization strategies by synthesizing two new Al 0.05 (TiVNb) 0.95–x Mo x (x = 0.05, 0.10) compositions. We specifically evaluate the effect of molybdenum (Mo) addition on the phase structure, microstructure, hydrogen absorption, and desorption properties. Both alloys crystallize in a bcc structure with decreasing lattice parameters as the Mo content increases. The alloys can rapidly absorb hydrogen at 25 °C with capacities of 1.78 H/M (2.79 wt %) and 1.79 H/M (2.75 wt %) with increasing Mo content. Pressure-composition isotherms suggest a two-step reaction for hydrogen absorption to a final fcc dihydride phase. The experiments demonstrate that increasing Mo content results in a significant hydride destabilization, which is consistent with predictions from a gradient boosting tree data-driven model for metal hydride thermodynamics. Furthermore, improved desorption properties with increasing Mo content and reversibility were observed by in situ synchrotron X-ray diffraction, in situ neutron diffraction, and thermal desorption spectroscopy.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Complex spin structure in co-trimer-chain Li 2 Co 3 Se 4 O 12

Complex magnetic materials are extremely attractive for revealing unconventional spin states and novel magnetic excitations. Here, we report the structural, thermodynamic, and magnetic properties of a novel magnetic material Li 2 Co 3 Se 4 O 12 based on x-ray and neutron diffraction, specific heat, magnetization, and x-ray photoelectron spectroscopy measurements. X-ray and neutron diffraction refinements reveal two Co sites Co (1) and Co (2) even though both are in the octahedral environment. While they are not connected along the b and c directions, these octahedra are edge-shared forming the Co (2) – Co (1) – Co (2) trimer chain along the a direction. The magnetic susceptibility exhibits the Curie-Weiss (CW) temperature dependence at high temperatures (above ∼50 K) with the negative CW temperature, a dip centered at T ⁎ ∼ 8.0 K, and an antiferromagnetic transition at T N = 3.3 K. The specific heat confirms that there is a phase transition at T N and a hump at T ⁎ . The long-range magnetic transition at T N implies that, in addition to the intra-chain interaction, there is strong inter-chain interaction, which is likely due to polarized SeO 3 bridging between chains. Single crystal neutron diffraction refinement reveals a complex magnetic structure with the angle between Co (1) and Co (2) moments ∼105°. Within the Co (2) – Co (1) – Co (2) trimer, two Co (2) moments are parallelly aligned. Surprisingly, the Co (1) moment (1.92μB) is only half of the Co (2) moment (3.96μB). There is likely the spin-state change for Co (1) from the high-spin state at T > T ⁎ to the low-spin state at T < T ⁎ , causing a dip in the magnetic susceptibility and a hump in the specific heat. When the magnetic field is applied, multiple metamagnetic transitions are found in all directions, implying field-driven magnetic excitations. Our results demonstrate rich magnetic properties of Li 2 Co 3 Se 4 O 12 that are sensitive to the external stimuli such as the magnetic field.

Antiferromagnetism↗
DOE OSTI2026

High-pressure neutron powder diffraction study of an arsenolite deuterium inclusion compound: structure and formation kinetics

High-pressure variable-temperature neutron powder diffraction was employed to investigate the synthesis and structural properties of arsenolite (As 4 O 6 ), a cubic arsenic( III ) oxide polymorph, and its inclusion compound with deuterium. The compound forms with the stoichiometry As 4 O 6 ·2D 2 , consistent with earlier findings. At 295 K and 1.96(2) GPa, D 2 molecules occupy the 16c site (0, 0, 0) and are aligned along the <111> direction. The diffraction data suggest that the D 2 molecules at this site become rotationally disordered upon decompression to 0.78(2) GPa at 120 K, while no occupancy is observed at the 8a position (⅛, ⅛, ⅛) under any of the studied conditions. The kinetic data of the high-pressure inclusion compound synthesis at 1.56(2) and 1.96(2) GPa were analyzed using the Avrami model. The Avrami exponent, 0.135(16), remains invariant with pressure, demonstrating that the reaction topochemistry is unaffected by compression. Similarly, the reaction rates, 0.29(3) and 0.23(3) min −0.135 at 1.56(2) and 1.96(2) GPa, respectively, exhibit negligible pressure dependence and suggest a surprisingly low activation volume of 1.6 cm 3 mol −1 for the reaction. These results provide detailed insight into the structural dynamics and kinetics of deuterium inclusion in arsenolite under high pressure.

Guńka, Piotr A. [Warsaw University of Technology (↗
DOE OSTI2020

A high-pressure flow through test vessel for neutron imaging and neutron diffraction-based strain measurement of geological materials

Neutron scattering and neutron imaging have emerged as powerful methods for experimentally investigating material deformation and fluid flow in the interior of otherwise inaccessible or opaque structures. This paper describes the design and provides example uses of a pressure cell developed for investigating such behaviors within geological materials. The cell can accommodate cylindrical samples with diameters up to 38.1 mm and lengths up to 154 mm. Additionally, ports in the cell and a pressure isolating sleeve around the sample allow the independent application of confining pressure up to 69 MPa and axial pressure up to 34.5 MPa. Furthermore, two material versions of the cell have been manufactured and used to date. An aluminum version is typically used for temperatures below 40 °C, because of its relative transparency to neutrons, while a titanium version, which is comparatively more neutron attenuating, is used for experiments requiring triaxial pressurization under conditions up to 350 °C. The pressure cells were commissioned at the VULCAN engineering diffractometer at the Oak Ridge National Laboratory (ORNL), Spallation Neutron Source, and have since been used at the ORNL high flux isotope reactor CG1-D imaging beamline, National Institute of Standard and Technology (NIST) BT-2, and NIST NG6 imaging beamlines.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

Canted antiferromagnetic order in the monoaxial chiral magnets V 1/3 TaS 2 and V 1/3 NbS 2

The Dzyaloshinskii-Moriya (DM) interaction is present in the transition metal dichalcogenides (TMDC) magnets of form M 1 / 3 T S 2 ( M = 3 d transition metal, T ϵ { Nb , Ta } ), given that the intercalants M form 3 × 3 superlattices within the structure of the parent materials T S 2 and break the centrosymmetry. Competition between DM and ferromagnetic exchange interactions has been shown to stabilize a topological defect known as a chiral soliton in select intercalated TMDCs, initiating interest both in terms of fundamental physics and the potential for technological applications. In the current article we report on our study of the materials V 1 / 3 TaS 2 and V 1 / 3 NbS 2 , using a combination of x-ray powder diffraction, magnetization, and single crystal neutron diffraction. Historically identified as ferromagnets, our diffraction results instead reveal that vanadium spins in these compounds are arranged into an A-type antiferromagnetic configuration at low temperatures. Refined moments are 1.37(6) and 1.50(9) μ B for V 1 / 3 TaS 2 and V 1 / 3 NbS 2 , respectively. Transition temperatures T c = 32 K for V 1 / 3 TaS 2 and 50 K for V 1 / 3 NbS 2 are obtained from the magnetization and neutron diffraction results. We attribute the small net magnetization observed in the low-temperature phases to a subtle ( ~ 2 ° ) canting of XY spins in the out-of-plane direction. These new results are indicative of dominant antiferromagnetic exchange interactions between the vanadium moments in adjacent a b planes, likely eliminating the possibility of identifying stable chiral solitons in the current materials.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Determination of single crystal thermal expansion in Uranium-6wt%Niobium shape memory alloy using in-situ diffraction and modeling of textured polycrystalline samples

In-situ neutron diffraction and ex-situ dilatometry experiments were performed on a chemically banded, quenched uranium-6wt% niobium shape memory alloy to study the impact of deformation-(detwinning-) induced texture on the evolution of thermally induced strains (and associated stresses). Thermal heating and cooling cycles between 5K and 473K were performed in-situ with neutron diffraction, and the lattice strain evolution is reported for the observed monoclinic α" phase. Comparisons between the measured diffraction strains and macroscopic dilatometry experiments reveal relationships between micro- and macro-level thermal expansion. Softening of the texture during heating suggests that twin boundary motion can accommodate the large internal thermal strains which are approximately 2% greater than that typically observed during the 175K heating interval used to age more randomly oriented polycrystalline material. Assuming weak constraint of neighboring grains in randomly textured polycrystals, the single crystal thermal expansion tensor is extracted from measurements of lattice strains over the range 5K to 473K. Predictions of polycrystalline thermal expansion, based upon this single crystal thermal expansion tensor, are shown to compare favorably with bulk thermal expansion observations of the as quenched microstructure. However, such a lower-bound estimate is insufficient to explain all aspects of the behavior of the textured material, where the matrix is not isotropic. In conclusion, it is hypothesized that relaxation processes which occur within the quenched microstructure during heating are responsible for the distinct thermal expansion behavior observed during the initial heating cycle compared to cooling and subsequent cycling.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Single-Crystal Diffuse Neutron Scattering Study of the Dipole-Octupole Quantum Spin-Ice Candidate Ce 2⁢ Zr 2 ⁢O 7 : No Apparent Octupolar Correlations Above 𝑇 = 0.05 K

The insulating magnetic pyrochlore Ce 2 ⁢Zr 2 ⁢O 7 has gained attention as a quantum spin-ice candidate with dipole-octupole character that arises from the crystal-electric-field ground-state doublet for the Ce 3+ Kramers ion. This dipole-octupole character permits both spin-ice phases based on magnetic dipoles and those based on more-exotic octupoles. This work reports low-temperature neutron diffraction measurements on single-crystal Ce 2 ⁢Zr 2⁢ O 7 with 𝑄 coverage both at low 𝑄, where the magnetic form factor for dipoles is near maximal, and at high 𝑄, covering the region where the magnetic form factor for Ce 3+ octupoles is near maximal. This study was motivated by recent powder neutron diffraction studies of other Ce-based dipole-octupole pyrochlores, Ce 2 ⁢Sn 2 ⁢O 7 and Ce 2 ⁢Hf 2 ⁢O 7 , which each showed temperature-dependent diffuse diffraction at high 𝑄, interpreted as arising from octupolar correlations. Our measurements use an optimized single-crystal diffuse scattering instrument that allows us to screen against strong Bragg scattering from Ce 2 ⁢Zr 2 ⁢O 7 . The temperature-difference neutron diffraction reveals a low-𝑄 peak consistent with dipolar spin-ice correlations reported in previous work, and an alternation between positive and negative net intensity at higher 𝑄. These features are consistent with our numerical-linked-cluster calculations using pseudospin interaction parameters previously reported for Ce 2 ⁢Zr 2⁢ O 7 , Ce 2 ⁢Sn 2 ⁢O 7 , and Ce 2 ⁢Hf 2 ⁢O 7 . Importantly, neither the measured data nor any of the NLC calculations show evidence for increased scattering at high 𝑄 resulting from octupolar correlations. We conclude that at the lowest attainable temperature for our measurements (𝑇 = 0.05 K), scattering from octupolar correlations in Ce 2 ⁢Zr 2 ⁢O 7 is not present in the neutron diffraction signal on the level of our observation threshold of around 0.1% of the low-𝑄 dipole scattering. We compare these results to those obtained earlier on powder Ce 2 ⁢Sn 2 ⁢O 7 and Ce 2⁢ Hf 2⁢ O 7 , and to low-energy inelastic neutron scattering from single-crystal Ce 2 ⁢Zr 2 ⁢O 7 .

36 MATERIALS SCIENCE↗
DOE OSTI2023

Magnetic ordering in terbium at high pressures and low temperatures

We have investigated magnetic ordering in the heavy lanthanide terbium (Tb) for pressures up to 70 GPa and temperatures down to 20 K by synchrotron x-ray diffraction at the Advanced Photon Source, Argonne National Laboratory. The x-ray diffraction studies were complemented by neutron diffraction studies at the Spallation Neutron Source, Oak Ridge National Laboratory. We focused on the higher-pressure phases of Tb, such as the double hexagonal close-packed (dhcp, above 16 GPa), distorted face-centered cubic (hR24, above 30 GPa), and orthorhombic (oF16, above 51 GPa) phases. We observed the phenomenon of spontaneous magnetostriction in the dhcp and hR24 phases, where magnetic ordering at low temperatures gives rise to subtle splitting in x-ray diffraction peaks. The neutron diffraction study of the dhcp phase at 20 GPa revealed magnetic peaks that can be assigned a propagation vector k = ($\frac{1}{2}$, 0, $\frac{1}{2}$), and a magnetic ordering temperature that is consistent with the magnetostriction effect observed with x-ray diffraction. The high-pressure and low-temperature x-ray diffraction study at 70 GPa in the collapsed oF16 phase did not show any evidence of magnetostriction, indicating a significant decrease in the magnetic moment of the 4f-shell due to band broadening at ultra-high compression.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Complex magnetic properties associated with competing local and itinerant magnetism in \({\text {Pr}}_2 {\text {Co}}_{0.86} {\text {Si}}_{2.88}\)

Ternary intermetallic compound \({\text {Pr}}_2 {\text {Co}}_{0.86} {\text {Si}}_{2.88}\) has been synthesized in single phase and characterized by x-ray diffraction, scanning electron microscopy with energy dispersive x-ray spectroscopy (SEM-EDX) analysis, magnetization, heat capacity, neutron diffraction and muon spin rotation/relaxation ( \(\mu\) SR) measurements. The polycrystalline compound was synthesized in single phase by introducing necessary vacancies in Co/Si sites. Magnetic, heat capacity, and zero-field neutron diffraction studies reveal that the system undergoes magnetic transition below \(\sim\) 4 K. Neutron diffraction measurement further reveals that the magnetic ordering is antiferromagnetic in nature with an weak ordered moment. The high temperature magnetic phase has been attributed to glassy in nature consisting of ferromagnetic clusters of itinerant (3 d ) Co moments as evident by the development of internal field in zero-field \(\mu\) SR below 50 K. The density-functional theory (DFT) calculations suggest that the low temperature magnetic transition is associated with antiferromagnetic coupling between Pr 4 f and Co 3 d spins. Pr moments show spin fluctuation along with unconventional orbital moment quenching due to crystal field. The evolution of the symmetry and the crystalline electric field environment of Pr-ions are also studied and compared theoretically between the elemental Pr and when it is coupled with other elements such as Co. The localized moment of Pr 4 f and itinerant moment of Co 3 d compete with each other below \(\sim\) 20 K resulting in an unusual temperature dependence of magnetic coercivity in the system.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Sawtooth lattice multiferroic BeCr 2 O 4 : Noncollinear magnetic structure and multiple magnetic transitions

Noncollinear magnetic structures and multiple magnetic phase transitions in a sawtooth lattice antiferromagnet consisting of Cr 3+ are experimentally identified in this work, thereby proposing the scenario of magnetism-driven ferroelectricity in a sawtooth lattice. The title compound, BeCr 2 O 4 , displays three magnetic phase transitions at low temperatures—at T N1 ≈ 7.5 K, at T N2 ≈ 25 K, and at T N3 ≈ 26 K—revealed through magnetic susceptibility, specific heat, and neutron diffraction in this work. These magnetic phase transitions are found to be influenced by externally applied magnetic fields. Isothermal magnetization curves at low temperatures below the magnetic transitions indicate the antiferromagnetic nature of BeCr 2 O 4 with two spin-flop-like transitions occurring at H c1 ≈ 29 kOe and H c2 ≈ 47 kOe. Our high-resolution x-ray and neutron diffraction studies, performed on single crystal and powder samples, unambiguously determined the crystal structure as orthorhombic Pbnm. By performing the magnetic superspace group analysis of the neutron diffraction data at low temperatures, the magnetic structure in the temperature range T N3,N2 < T < T N1 is determined to be the polar magnetic space group P21nm. 1' (00g) 0s0s with a cycloidal magnetic propagation vector k 1 = (0, 0, 0.090 (1)) . The magnetic structure in the newly identified phase below T N1 is determined as P21/b.1' [b] (00 g) 00s with the magnetic propagation vector k 2 = (0, 0, 0.908 (1)). Finally, the cycloidal spin structure determined in our work is usually associated with electric polarization, thereby making BeCr 2 O 4 a promising multiferroic belonging to the sparsely populated family of sawtooth lattice antiferromagnets.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Dipolar Spin Ice Regime Proximate to an All-In-All-Out Néel Ground State in the Dipolar-Octupolar Pyrochlore Ce 2 Sn 2 O 7

The dipolar-octupolar (DO) pyrochlores, R 2 M 2 O 7 ( R = Ce , Sm , Nd ), are key players in the search for realizable novel quantum spin liquid (QSL) states as a large parameter space within the DO pyrochlore phase diagram is theorized to host QSL states of both dipolar and octupolar nature. New single crystals and powders of Ce 2 Sn 2 O 7 , synthesized by hydrothermal techniques, present an opportunity for a new characterization of the exchange parameters in Ce 2 Sn 2 O 7 using the near-neighbor X Y Z model Hamiltonian associated with DO pyrochlores. Utilizing quantum numerical linked cluster expansion fits to heat capacity and magnetic susceptibility measurements, and classical Monte Carlo calculations to the diffuse neutron diffraction of the new hydrothermally grown Ce 2 Sn 2 O 7 samples, we place Ce 2 Sn 2 O 7 ’s ground state within the ordered dipolar all-in-all-out (AIAO) Néel phase, with quantum Monte Carlo calculations showing a transition to long-range order at temperatures below those accessed experimentally. Indeed, our new neutron diffraction measurements on the hydrothermally grown Ce 2 Sn 2 O 7 powders show a broad signal at low scattering wave vectors, reminiscent of a spin ice, in striking contrast from previous powder neutron diffraction on samples grown from solid-state synthesis, which found diffuse scattering at high scattering wave vectors associated with magnetic and suggested an octupolar quantum spin ice state. We conclude that new hydrothermally grown Ce 2 Sn 2 O 7 samples host a finite-temperature proximate dipolar spin ice phase, above the expected transition to AIAO Néel order. Published by the American Physical Society 2024

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗