Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Metal Forming”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Optical Microscopy Techniques to Inspect for Metallic Whiskers

Metal surface finishes of tin, zinc and cadmium are often applied to electronic components, mechanical hardware and other structures. These finishes sometimes unpredictably may form metal whiskers over periods that can take from hours to months or even many years. The metal whiskers are crystalline structures commonly having uniform cross sectional area along their entire length. Typical whisker dimensions are nominally on the order of only a few microns (um) across while their lengths can extend from a few microns to several millimeters. Metal whiskers pose a reliability hazard to electronic systems primarily as an electrical shorting hazard. The extremely narrow dimensions of metal whiskers can make observation with optical techniques very challenging. The videos herein were compiled to demonstrate the complexities associated with optical microscope inspection of electronic and mechanical components and assemblies for the presence or absence of metal whiskers. The importance of magnification, light source and angle of illumination play critical roles in being able to detect metal whiskers when present. Furthermore, it is demonstrated how improper techniques can easily obscure detection. It is hoped that these videos will improve the probability of detecting metal whiskers with optical inspection techniques.

Brusse, Jay A.↗

Formation of metallic LiH

It is shown that a metallic form of LiH may be produced at the relatively low transition pressure of 1.1 mbar. LiH may thus be applied to studies of insulator-metal transition at high pressure. Experimental data is used to calculate LiH transition parameters: first, Herzfeld's criterion (1927) is used to determine the volume at which metallic behavior begins, and second, pressure-volume measurements for estimating the pressure at which this volume is achieved are extrapolated. For comparison, the same volume-pressure calculation is performed for H2, and it is found that the metallization of LiH should occur more easily than that of H2.

Vaisnys, J. R.↗

Origin of tungsten and geochemical controls on its occurrence and mobilization in shallow sediments from Fallon, Nevada, USA

In this study, tungsten (W) occurrence and speciation was investigated in sediments collected from Fallon, Nevada where previous studies have linked elevated W levels in human body fluids to an unusual cluster of childhood leukemia cases. The speciation of sedimentary W was determined by μ-XRF mapping and μ-XANES. The W content of the analyzed surface sediments ranged between 81 and 25,908 mg/kg, which is significantly higher than the W content in deeper sediments which ranged from 37 to 373 mg/kg at 30 cm depth. The μ-XANES findings reveal that approximately 20–50% of the total W in the shallow sediment occurs in the metallic form (W 0 ); the rest occurs in the oxide form (W VI O 3 ). Because W 0 does not occur naturally, its elevated concentrations in surface sediments point toward a possible local anthropogenic origin. The oxidation of metallic W 0 with meteoric waters likely leads to the formation of W VI O 3 . The chief water-soluble W species was identified as WO 4 2– by chromatographic separation and speciation modeling. These results led us to postulate that W 0 particles from a currently unknown but local source(s) is (are) deposited onto the soils and/or surface sediments. The W 0 in interaction with meteoric water is oxidized to W VI O 3 , and as these sediment-water interactions progress, WO 4 2– is formed in the water at pH ~7. Under pH < 7, and sufficient W concentrations, tungstate tends to polymerize, and polymerized species are less likely to adsorb onto sediments. Polymerized species have lower affinity than monomers, which leads to enhanced mobility of W.

58 GEOSCIENCES↗

Correlation between Fragility and the Arrhenius Crossover Phenomenon in Metallic, Molecular, and Network Liquids

In this paper, we report the observation of a distinct correlation between the kinetic fragility index m and the reduced Arrhenius crossover temperature θ A = T A /T g in various glass-forming liquids, identifying three distinguishable groups. In particular, for 11 glass-forming metallic liquids, we universally observe a crossover in the mean diffusion coefficient from high-temperature Arrhenius to low-temperature super-Arrhenius behavior at approximately θ A ≈ 2 which is in the stable liquid phases. In contrast, for fragile molecular liquids, this crossover occurs at much lower θ A ≈ 1.4 and usually in their supercooled states. The θ A values for strong network liquids spans a wide range higher than 2. Intriguingly, the high-temperature activation barrier E ∞ is universally found to be ~11k B T g and uncorrelated with the fragility or the reduced crossover temperature θ A for metallic and molecular liquids. Finally, these observations provide a way to estimate the low-temperature glassy characteristics (T g and m) from the high-temperature liquid quantities (E ∞ and θ A ).

36 MATERIALS SCIENCE↗

Linking structure to fragility in bulk metallic glass-forming liquids

Using in-situ synchrotron X-ray scattering, we show that the structural evolution of various bulk metallic glass-forming liquids can be quantitatively connected to their viscosity behavior in the supercooled liquid near T{sub g}. The structural signature of fragility is identified as the temperature dependence of local dilatation on distinct key atomic length scales. A more fragile behavior results from a more pronounced thermally induced dilatation of the structure on a length scale of about 3 to 4 atomic diameters, coupled with shallower temperature dependence of structural changes in the nearest neighbor environment. These findings shed light on the structural origin of viscous slowdown during undercooling of bulk metallic glass-forming liquids and demonstrate the promise of predicting the properties of bulk metallic glasses from the atomic scale structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Templating metastable Pd 2 carboxylate aggregates

Evaluation of the potential for metal–metal (M–M) cooperation to enable catalysis requires access to specific polynuclear aggregates that display appropriate geometry and size. Here we demonstrate ion metathesis within pre-formed metal–organic frameworks (MOFs) to prepare metastable Pd 2 tetracarboxylates sites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Internal Structure and Mineralogy of Differentiated Asteroids Assuming Chondritic Bulk Composition: The Case of Vesta

Bulk composition (including oxygen content) is a primary control on the internal structure and mineralogy of differentiated asteroids. For example, oxidation state will affect core size, as well as Mg# and pyroxene content of the silicate mantle. The Howardite-Eucrite-Diogenite class of meteorites (HED) provide an interesting test-case of this idea, in particular in light of results of the Dawn mission which provide information on the size, density and differentiation state of Vesta, the parent body of the HED's. In this work we explore plausible bulk compositions of Vesta and use mass-balance and geochemical modelling to predict possible internal structures and crust/mantle compositions and mineralogies. Models are constrained to be consistent with known HED samples, but the approach has the potential to extend predictions to thermodynamically plausible rock types that are not necessarily present in the HED collection. Nine chondritic bulk compositions are considered (CI, CV, CO, CM, H, L, LL, EH, EL). For each, relative proportions and densities of the core, mantle, and crust are quantified. Considering that the basaltic crust has the composition of the primitive eucrite Juvinas and assuming that this crust is in thermodynamic equilibrium with the residual mantle, it is possible to calculate how much iron is in metallic form (in the core) and how much in oxidized form (in the mantle and crust) for a given bulk composition. Of the nine bulk compositions tested, solutions corresponding to CI and LL groups predicted a negative metal fraction and were not considered further. Solutions for enstatite chondrites imply significant oxidation relative to the starting materials and these solutions too are considered unlikely. For the remaining bulk compositions, the relative proportion of crust to bulk silicate is typically in the range 15 to 20% corresponding to crustal thicknesses of 15 to 20 km for a porosity-free Vesta-sized body. The mantle is predicted to be largely dominated by olivine (>85%) for carbonaceous chondrites, but to be a roughly equal mixture of olivine and pyroxene for ordinary chondrite precursors. All bulk compositions have a significant core, but the relative proportions of metal and sulphide can be widely different. Using these data, total core size (metal+ sulphide) and average core densities can be calculated, providing a useful reference frame within which to consider geophysical/gravity data of the Dawn mission.

Toplis, M. J.↗

Stretching the limits of forming processes by robust optimization: A demonstrator

Robust design of forming processes using numerical simulations is gaining attention throughout the industry. In this work, it is demonstrated how robust optimization can assist in further stretching the limits of metal forming processes. A deterministic and a robust optimization study are performed, considering a stretch-drawing process of a hemispherical cup product. For the robust optimization study, both the effect of material and process scatter are taken into account. For quantifying the material scatter, samples of 41 coils of a drawing quality forming steel have been collected. The stochastic material behavior is obtained by a hybrid approach, combining mechanical testing and texture analysis, and efficiently implemented in a metamodel based optimization strategy. The deterministic and robust optimization results are subsequently presented and compared, demonstrating an increased process robustness and decreased number of product rejects by application of the robust optimization approach.

36 MATERIALS SCIENCE↗

Exploratory Synthesis: The Fascinating and Diverse Chemistry of Polar Intermetallic Phases

Exploratory synthetic adventures regarding the inorganic chemistry of polar intermetallic phases have proven to be especially productive of novel compositions, new and unprecedented structures, and unusual bonding regimes. Reactions of diverse elements with widely different electronegativities allow the definition of two opposed classes of products: polycationic or polyanionic clusters or networks of metals paired with the corresponding monatomic anions or cations. These can be usefully viewed as intermetallic 'salts', redox products of simpler neutral intermetallic systems but with widely different factors governing their stabilities. Thus, combinations of rare-earth metals alone or with late transition metals form a novel variety of polymetal network structures with relatively isolated telluride (or halide) spacer anions. Similarly, extensions of traditional Zintl phases of the alkali or alkaline-earth metals from the later p elements to the earlier triels, Ga-Tl especially, yield many new and elegant polyanionic structures. The substitution or addition of still earlier p or late d metal components produces still electron-poorer and more condensed polar intermetallic phases with increasingly delocalized bonding, higher coordination numbers, and more unusual structures and bonding. These discoveries have also led to new approaches: electronic tuning via band calculations to generate new families of quasicrystals and their crystalline approximants with their characteristic structural regimes and regularities. Gold as a substituent generates particularly novel bonding in arrays of mixed metals or polygold anionic networks.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High performance TiN gate contact on AlGaN/GaN transistor using a mechanically strain induced P-doping

High performance titanium nitride sub-100 nm rectifying contact, deposited by sputtering on AlGaN/GaN high electron mobility transistors, shows a reverse leakage current as low as 38 pA/mm at V{sub GS} = −40 V and a Schottky barrier height of 0.95 eV. Based on structural characterization and 3D simulations, it is found that the polarization gradient induced by the gate metallization forms a P-type pseudo-doping region under the gate between the tensile surface and the compressively strained bulk AlGaN barrier layer. The strain induced by the gate metallization can compensate for the piezoelectric component. As a result, the gate contact can operate at temperatures as high as 700 °C and can withstand a large reverse bias of up to −100 V, which is interesting for high-performance transistors dedicated to power applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Nanocomposites with silver nanoparticles based on copolymer of 1-vinyl-1,2,4-triazole with N-vinylpyrrolidone

New functional silver polymer nanocomposites were synthesized using copolymer of 1-vinyl-1,2,4-triazole with N-vinylpyrrolidone as a stabilizer of the formed metal nanoparticles. The formation of a metal phase in the nanosized state was confirmed by powder X-ray diffraction. According to transmission electron microscopy, the obtained polymer nanocomposites consist of isolated nanoparticles with diameter from 1 to 12 nm having a predominately spheric form, which are uniformly distributed throughout the bulk of the polymeric matrix. The nanocomposites are characterized by different degrees of nanoparticle size distribution, which is determined by the ability of the polymeric matrix to stabilize different metal content.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

POSSIBLE SIGNS OF WATER AND DIFFERENTIATION IN A ROCKY EXOPLANETARY BODY

Spitzer observations reveal the presence of warm debris from a tidally destroyed rocky and possibly icy planetary body orbiting the white dwarf GD 61. Ultraviolet and optical spectroscopy of the metal-contaminated stellar photosphere reveal traces of hydrogen, oxygen, magnesium, silicon, iron, and calcium. The nominal ratios of these elements indicate an excess of oxygen relative to that expected from rock-forming metal oxides, and thus it is possible that water was accreted together with the terrestrial-like debris. Iron is found to be deficient relative to magnesium and silicon, suggesting the material may have originated as the outer layers of a differentiated parent body, as is widely accepted for the Moon.

79 ASTRONOMY AND ASTROPHYSICS↗

Lessons Learned Using in-situ TEM Liquid Corrosion of Al Alloys

Al and Al alloys are of interest in energy applications due to their strength and low weight [1] in addition to their electrochemical properties for aluminum-air batteries for energy storage [2]. However, Al alloys also are susceptible to corrosion in a variety of environments including liquid electrolytes and in solar panels [3], which has led to a great deal of research to understand and improve corrosion resistance in these materials. Al metal forms a native, passivating oxide layer in the presence of ambient air, which slows corrosion initiation. However, pitting still occurs as this protective layer breaks down in the presence of electrolytes. Thin metal Al films were used in these experiments to observe initiation and growth of pitting, which can be used as an approximation of corrosion initiation behavior in bulk samples.

alluminum alloys↗

Structure and properties of Cd{sub x}Hg{sub 1-x}Te-metal contacts

A metal-semiconductor contact is a composite structure consisting of several nanodimensional layers. The contact properties depend strongly on the technique of metal deposition. A metal forms chemical compounds with the components of Cd{sub x}Hg{sub 1-x}Te (CMT), thus changing the properties of the surface layer. Mercury is accumulated at the interface with the metal, while tellurium is accumulated on the metal surface. The CMT compounds with metals, heats of their formation, and the Fermi level shifts are reported. The structure and properties of the interfaces between CMT and gold, silver, indium, aluminum, copper, and other metals, as well as the effect of sublayers of other metals and insulators, are described.

36 MATERIALS SCIENCE↗

Hydroxide melt induced corrosion of Ni at elevated temperatures under steam electrolysis conditions

Molten alkali electrolyte based high temperature water electrolysis (HTWE) process offers an efficient pathway to integrate renewable energy resources for large scale and economic hydrogen production. Long term and stable operation of these systems require an in-depth understanding of materials stability under anodic and cathodic exposure conditions of the cell and cell stacks. In the present study, we report our findings on the corrosion of Ni in the presence and absence of (LieNa) hydroxide melt at 600 °C under oxidizing and reducing conditions representative of HTWE. While the Ni electrode was found to remain thermodynamically stable in metallic form under cathodic (reducing) exposure conditions, the corrosion rate in molten hydroxide under oxidizing conditions was found to be nonparabolic in nature. A cyclic voltammetry study provides the breakdown of the passive metal-oxide surface layer at the anodic overpotential region between 0.45 V and 2 V in molten hydroxide under oxidizing conditions. As a result, a thermochemical process for accelerated corrosion based on the oxide scale fluxing in hydroxide melt has been developed.

08 HYDROGEN↗

Tuning Binding Tendencies of Small Molecules in Metal–Organic Frameworks with Open Metal Sites by Metal Substitution and Linker Functionalization

Metal-organic frameworks (MOFs) with open metal sites (OMS) are known to be selective for ethylene relative to ethane. In practical applications of this separation, the presence of other small molecules such as H 2 O, CO, and C 2 H 2 may affect the suitability of sorbents. We used density functional theory (DFT) calculations to compute the binding energies of H 2 O, CO, C 2 H 2 , C 2 H 4 , and C 2 H 6 in M-BTC (BTC = 1,3,5-benzenetricarboxylic acid) with 12 different metals forming OMS (M = Mg, Ti, V, Cr, Mo, Mn, Fe, Ru, Co, Ni, Cu, and Zn). To probe the generality of these results for MOFs containing other ligands, we performed similar calculations for metal-substituted MOFs based on four more materials with dimeric Cu sites. Here, our results provide useful insights into the variations in binding energies that are achievable by metal substitution in this broad class of MOFs, as well as pointing towards feasible adsorption-based separation strategies for complex molecular mixtures. Zn OMS MOFs were predicted to have the highest C 2 H 4 /C 2 H 6 selectivity, but the strong binding energy of solvents and other small molecules in these materials may create practical challenges. Finally, we used DFT calculations to examine whether functionalizing linkers in these materials with electron withdrawing (-fluorine) and donating (-methyl) groups offer a useful way to tune molecular binding energies on OMS in these materials.

36 MATERIALS SCIENCE↗

Improving metal/semiconductor conductivity using AlO{sub x} interlayers on n-type and p-type Si

Thermal atomic layer deposition was used to form ultra-thin interlayers in metal/interlayer/ semiconductor Ohmic contacts on n-type and p-type Si. AlO{sub x} of thickness 1–2 nm was deposited at 120 °C on Si substrates prior to metallization, forming Ni/AlO{sub x}/Si contacts. Conductivity improved by two orders of magnitude but the contacts remained rectifying. When they were annealed at 200 °C, the conductivity increased by another order of magnitude and the samples became Ohmic. A minimum specific contact resistivity of 1.5 × 10{sup −4} Ω-cm{sup 2} was obtained for structures based on lightly doped (10{sup 15 }cm{sup −3}) Si substrates. Existing models that describe Fermi level de-pinning do not fully explain our results, which are however consistent with other experimental data in the literature.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electrohydraulic Forming of Sheet Metal for Structural Automotive Applications - PNNL CRADA 258 Project Letter Agreement 1

This project focused on developing, characterizing, and commercializing electrohydraulic forming of sheet metal for structural automotive applications. Pulsed electrohydraulic forming is an electrodynamic process based upon high-voltage discharge of capacitors between two electrodes positioned in a fluid-filled chamber. The electrical discharge results in the vaporization of a small volume of the liquid, which creates a high-intensity, high-velocity shock wave in the liquid. The shock wave is directed toward a sheet metal workpiece, which is ultimately driven into a die.

aluminum↗