Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Melting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

The Addition of Boron to Melt-Spun Fe-6.5%Si Ribbons

Fe-6.5%Si has higher electrical resistivity, lower magnetocrystalline anisotropy, and lower magnetostriction than traditional Fe-3.2%Si silicon steel. The reduced iron losses of Fe-6.5%Si render it a highly favorable candidate for high-speed motors and transformers. However, large-scale production of wide Fe-6.5%Si tape by rapid solidification can be challenging mainly because of its high melting point. In this work, boron is alloyed to Fe-6.5%Si to reduce its melting temperature and interfacial energy to improve the alloy’s processability. Boron additions from 0.01 wt.% to 2.24 wt.% into Fe-6.5%Si and its effect on ribbon thickness, grain size, magnetic, and mechanical properties were studied. Further, minor boron alloying significantly changed the melt pool stability and wetting on the quench wheel and in turn increased the quench rate with minimum impact on the magnetic saturation and ductility. Boron addition of < 0.06 wt.% was also found beneficial to the magnetic property of the alloy by lowering both its hysteresis and eddy current losses.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Modeling of melting and erosion in high velocity microparticle impacts

High velocity collisions can cause melting, a situation involving elasticity, plasticity, and phase transformations in tandem, which is very challenging for mechanical modeling. Here, this paper advances the use of smoothed particle hydrodynamics (SPH) simulations for this complex situation, investigating stainless steel microspheres impacting a tin substrate. After extensive validation against a range of mechanical and geometrical measurements of experimental impacts, the model provides a detailed, quantitative view of melt volume production over a broad range of impact velocities. It also enables direct decomposition of the impact energy partitioning, including analysis of the energy absorbed by plasticity in the impactor, the system kinetic energy, and the adiabatic heating of the substrate in addition to the melting itself. Since these quantities are not available experimentally, SPH modeling substantially enhances the quantitative understanding of such impacts. Finally, the model speaks to the phase characteristics of the ejecta formed during impact, confirming the experimental inference that the ejected material likely contains a significant fraction of solid material.

Constitutive modeling↗
DOE OSTI2023

High fidelity model of directed energy deposition: Laser-powder-melt pool interaction and effect of laser beam profile on solidification microstructure

Metal additive manufacturing technologies keep receiving a great deal of interest as well as strong requests to develop methods to link the process science to printed parts performance and understand how to overcome inherent limitations. Here, a high-fidelity model based on the multiphysics ALE3D code was developed to reproduce the directed energy deposition process down to the powder scale. This includes resolving the laser-powder-melt pool interactions (powder impingement and incorporation into melt pool, hydrodynamics flow condition and laser absorption inefficiencies) as well as the resulting solidification microstructure. This micrometer scale digital twin captured the effect of powder incorporation process and powder flow rate on porosity. Furthermore, it was used to explore how a ring laser beam profile instead of the standard Gaussian laser profile could decrease the thermal gradient along the solidification front in the melt pool, which in turn can increase propensity for more desirable equiaxed grains.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Uncovering grain and subgrain microstructure at the scale of additive manufacturing melt tracks with a scalable cellular automaton solidification model

Metal additive manufacturing, characterized by rapid solidification, yields refined grains with a distinctive cellular subgrain microstructure that plays a pivotal role in determining material properties. Due to the significant computational expense demanded to simulate the required physics with submicron spatial resolution, their numerical simulations have been limited to proof-of-concept studies to either 2D or small subregions of a melt pool. In this study, an open-source, scalable, solidification code, muMatScale, based on the cellular automaton method, has been developed to predict the grain and the underlying subgrain microstructure over an entire melt pool. The model incorporates flexible parallelization schemes, utilizing MPI and OpenMP GPU Offloading, in addition to appropriate multi-physics specific to non-equilibrium rapid solidification in AM. The impact of nucleation parameters on grain microstructures was investigated with a focus on grain size variations and morphology transitions. With selected nucleation parameters, the simulation predicted the grain size, subgrain morphology, crystallographic orientation, and microsegregation aligned with experimental measurements. The model demonstrates that epitaxial grain growth is a dominant factor at the melt pool boundary, influencing grain size variation under different grain sizes in the build plate while maintaining consistent primary dendrite arm spacing under identical thermal conditions. Here, the highly efficient numerical model enables large-scale simulations with a spatial resolution of 100 nm or less, unveiling unprecedented insights into thermal and solutal diffusion driven grain growth, and the subgrains with microsegregation within grains in 3D across scales. muMatScale will enable the linking of submicron length-scale microstructure to part-level material behavior by investigating fundamental solidification problems at the intercellular scale in many-track and many-layer builds.

36 MATERIALS SCIENCE↗
DOE OSTI2025

A detailed study of pre-heating effects in electron beam melting powder bed fusion process

Metal-based additive manufacturing processes, such as powder bed fusion with electron beam (PBF-EB) process, also referred to as electron beam melting (EBM), can produce high-density parts with minimal residual stresses due to the uniform and coherent preheating of the powder bed. However, understanding and controlling the multiple stages of preheating is required to enable the production of high-quality, consistent parts of various materials. This work presents a large-scale, multi-layer, three-dimensional numerical analysis focused on studying the preheating stages for predicting thermal history during the PBF-EB process. The model follows a continuous multi-stage cyclic process, that incorporates all the main stages of the PBF-EB process for 316 L stainless steel. This includes the gradual deposition of a new powder layer, the first and second preheating levels of the powder bed, and the energy deposition during melting (excluding the actual melt-pool behavior simulation). The model employs an adaptive time-scaling approach that automatically adjusts the energy deposition for each solution time-increment. This allows for localized changes in time-resolution over an otherwise computationally expensive multi-layer procedure. The material property variations are also taken into account, with an emphasis on the subtle irreversible changes in powder effective thermal conductivity after the two requisite preheating stages of the powder bed. This effect is studied using simplified conductivity models from the literature for partially sintered powder, validated by a dedicated experiment and numerical simulation. The large-scale model is then used to estimate the actual temperatures during first and second preheating levels for 316 L steel, which is not yet fully supported commercially for PBF-EB. Model predictions are corroborated by experiments, using and analyzing IR images, taken at the completion of each layer by the machine’s built-in infrared camera. The current model also incorporates a qualitative assessment for the effects of conductivity change during pre-heating, as well as evaluates the applicability of the time-scaling approach.

36 MATERIALS SCIENCE↗
DOE OSTI2021

The causal relationship between melt pool geometry and energy absorption measured in real time during laser-based manufacturing

During laser powder bed fusion additive manufacturing, laser power absorption is governed by a pro -tean pool of molten metal that can present as a highly reflective surface, a deeply absorbing cavity, or some amalgamation thereof. These melt pool dynamics have been linked to defect creation, porosity, and surface finish quality. Although these are therefore critical for determining final part quality, their in-stantaneous influence on laser absorption have only been explored through simulation. To date, direct real-time observations have been elusive due to the locally extreme environment. In this work, we fo-cus a laser on Ti-6Al-4V powder and bare plate while quantifying the time-dependent, absolute energy absorption by monitoring omnidirectional backscattered laser intensity. We also simultaneously record the projective melt pool geometries with high-speed synchrotron x-ray imaging. We find that laser ab-sorption strongly reflects the stability of the vapor depression over a wide range of applied laser powers, oxygen content in the processing atmosphere, and with the presence of powder. During laser scanning of a powder bed surface, we find a significant absorption reduction after 400 mu s due to a dramatic change in the vapor depression aspect ratio-an event known to create porosity. Furthermore, as several industrial scan strate-gies necessitate thousands of these events during a build, their identification and control is of significant practical importance. Lastly, a normalized enthalpy model is demonstrated to be effective in quantifying the relationship between the laser absorption and cavity depth, even under transient conditions. In addi-tion to providing vital quantitative data for simulation calibration, the correlation of melt pool geometry with laser absorption during realistic processing conditions suggests the use of a total backscattered light detection system for real-time process control.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Experimental and computational studies of melting of the spinel phase in the Fe–Al–O ternary system

The melting behavior of spinel in the Fe–Al–O system at high temperatures (1500–1800 °C) was studied by a combination of experimental and computational investigations. Differential thermal analysis (DTA) at ultra-high temperatures coupled with cooling traces on CO 2 laser-heated levitated samples provided melting temperatures and the heats of fusion of (Fe,Al) 3 O 4 spinel phases. The experimental results are in fair agreement with the predictions using a published CALPHAD description and areas for modeling improvement are identified. New insights into the melting of defect spinel are provided.

36 MATERIALS SCIENCE↗
DOE OSTI2023

An operando synchrotron study on the effect of wire melting state on solidification microstructures of Inconel 718 in wire-laser directed energy deposition

Directed energy deposition (DED) with a coaxial wire-laser configuration has gained significant attention in recent years for the production of large-scale metallic components because of its low directional dependence, fast deposition rate, high feedstock efficiency, and low manufacturing costs. This work studies the coaxial wire-laser DED process of Inconel 718 alloy under a stable deposition condition with a relatively low input volumetric energy density (55.5J/mm 3 ). Post characterization reveals a cluster of refined grains at the center-bottom region of the as-printed track. Operando high-energy synchrotron X-ray experiments and multi-physics modeling are applied innovatively to study the fundamental mechanism responsible for the formation of this microstructure. The X-ray diffraction experiment provides direct evidence, which is supported by the simulation, that the feeding wire can reach the melt pool bottom and release solid particles (primarily carbides) near the mushy zone owing to insufficient melting. Consequently, these sub-micron sized particles suppress the growth of large columnar grains and cause the formation of unique microstructural heterogeneity. In conclusion, this discovery offers new opportunities for tailoring the solidification microstructure by controlling the melting state of the feedstock wire in DED process, in addition to commonly known factors such as the thermal gradient and solidification velocity.

42 ENGINEERING↗
DOE OSTI2021

Magnetoelastic transition and magnetocaloric effect in induction melted Fe 100-x Rh x bulk alloys with x = 50, 51

Magnetoelastic transitions (METs) in bulk in nearly equiatomic Fe-Rh alloys produced by arc melting may show poor reproducibility related to insufficient chemical homogeneity and presence of impurity phases in variable concentrations. To better understand the synthesis conditions that reliably yield bulk FeRh materials with reproducible MET characteristics, Fe 100-x Rh x alloys with x = 50, 50.5 and 51 at. % were prepared by induction melting and thermal annealing under identical conditions. The fabricated samples were cut into several slices, followed by characterization of METs in each of the slices using isothermal and isofield magnetization measurements, differential scanning calorimetry, and direct measurements of the magnetocaloric effect. All of the slices exhibit METs between the AFM and FM states, but the transitions are abrupt with nearly the same change of magnetization, ΔM, when x = 50.5 and 51, whereas for the x = 50 alloy the transition spreads over a wide temperature interval and ΔM may fluctuate by as much as 10 % from one specimen to another. A comparison of the magnetocaloric responses of x = 50 and 51 materials is presented. The clearly different effect of the magnetic field on the transition in both directions leads to significant differences in the reversibility and maximum values of the magnetic field-induced entropy and adiabatic temperature changes, as well as average hysteresis losses. In terms of reproducibility, our results suggest that induction melting is a more appropriate technique to prepare these binary alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Atomistic Simulations of Polydisperse Lignin Melts Using Simple Polydisperse Residue Input Generator

Understanding the physics of lignin will help rationalize its function in plant cell walls as well as aiding practical applications such as deriving biofuels and bioproducts. Here, in this work, we present SPRIG (Simple Polydisperse Residue Input Generator), a program for generating atomic-detail models of random polydisperse lignin copolymer melts i.e., the state most commonly found in nature. Using these models, we use all-atom molecular dynamics (MD) simulations to investigate the conformational and dynamic properties of polydisperse melts representative of switchgrass (Panicum virgatum L.) lignin. Polydispersity, branching and monolignol sequence are found to not affect the calculated glass transition temperature, T g . The Flory–Huggins scaling parameter for the segmental radius of gyration is 0.42 ± 0.02, indicating that the chains exhibit statistics that lie between a globular chain and an ideal Gaussian chain. Below T g the atomic mean squared displacements are independent of molecular weight. In contrast, above T g , they decrease with increasing molecular weight. Therefore, a monodisperse lignin melt is a good approximation to this polydisperse lignin when only static properties are probed, whereas the molecular weight distribution needs to be considered while analyzing lignin dynamics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Promising Method of Sm–Co Magnet Reprocessing in Alkali Chloride Melts

Developing new, efficient methods for samarium and cobalt recovery from scraps/rejects and swarf at Sm–Co magnet manufacturing sites during shaping and finishing is an important task in terms of meeting their growing demand. In this work, the reaction of oxygen with a solution of samarium and cobalt chlorides in a LiCl–KCl eutectic melt was studied at 400–600 °C to explore possible methods for the separation and recovery of samarium and cobalt from these waste products. The pyrochemical reaction resulted in the formation and precipitation of samarium oxychloride, while the cobalt remained in the melt in a soluble chloride form. The effect of temperature and the amount of oxygen passed through the melt (oxygen-to-samarium molar ratio) on the course of the reaction were studied. Kinetic parameters of the oxygen with samarium chloride reaction were determined.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Melting Point Depression and Phase Identification of Sugar Alcohols Encapsulated in ZIF Nanopores

Sugar alcohols (SAs) have attractive characteristics as phase-change materials, but their relatively high melting temperature limits their application in the real world. Nanoconfinement can be a useful parameter to reduce the melting temperature to pragmatic ranges. Using molecular dynamics simulations, we investigate the phases and behaviors of encapsulated SA in ZIF-8 and ZIF-11, which cannot be experimentally observed. Based on reliable partial charges for the zeolitic imidazolate framework (ZIF) structures calculated by a density functional theory, structural analysis shows that the SA’s attractive interaction with the ZIF structure frustrates the SA crystallization and also elucidates the second-order phase transition between amorphous phases. A methodology is suggested to determine the phase transition temperature of confined materials and used to quantify the melting temperature depression of the ZIF-confined SAs. We also explored the thermal conductivity of SA-in-ZIF composites. Phonon frequency analysis verifies that the presence of SA molecules enhances the heat transfer by adding heat pathways between the nanoporous structure of ZIFs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Viscoelastic Response of Dispersed Entangled Polymer Melts

Any polymer synthesis routes result in molecular weight dispersity DAI, depending on the polymerization mechanism. The lowest dispersity polymers are those made by anionic and atom-transfer radical polymerization, which exhibit relatively narrow distributions DM=g,„1A172 — 1.02-1.04. This small divergence from monodispersity results in significant number of molecules that differ in their molecular weight from the average and their impact on the viscoelastic response remains an open question. Here the effects of low dispersity on stress relaxation and shear viscosity of entangled melts are studied using a coarse-grained model for polyethylene. Polymer melts with chain length dispersity set to follow a Schulz-Zimm distribution of Dm = 1.0 — 1.16 for an entangled polyethylene melt using molecular dynamic simulations. The systems were studied to times up to 800 ,us which is beyond the terminal time. These systems are compared to those with binary and ternary distributions. The stress relaxation functions were extracted from the Green-Kubo relation and from stress-strain relaxation following a uniaxial extension. We find on the entanglement time scale, both the mean squared displacement and the stress relaxation are independent of D m . The tube diameter and the rubbery plateau for entangled dynamics do not depend on D m . At longer times, the terminal relaxation time decreases as the faster motion of the shorter chains results in constraint release for the longer chains. Probing this low dispersity regime opens the way to evaluate the degree of dispersity that affects mechanical properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Topological Effects Near Order–Disorder Transitions in Symmetric Diblock Copolymer Melts

The effects of polymer chain topology on the order–disorder transition of symmetric AB diblock copolymer melts are studied using coarse-grained molecular dynamics simulations. Specifically, we compared chain conformations near the lamellar-disordered transition in melts of symmetric (i.e., 50–50) AB diblock copolymers of linear chains, rings, and trefoil knots at the same chain lengths. The order (lamellar)–disorder transition temperature and the domain sizes both shifted to lower values with the introduction of topological constraints, leading to the following sequence: linear chains > rings > trefoil knots. Furthermore, investigation of the polymer chain conformations in terms of their radii of gyration, their writhe values (a measure for the degree of intertwining of a chain around itself), and their Jones polynomials (a method to measure entanglement of curves) showed that linear chains and rings remained stretched, while knots were stretched and tightened in disordered melts close to the lamellar-disorder transition. This work highlights chain topology as an important factor in affecting microphase separation in block copolymers.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Monitoring Depolymerization in Mesopores Using Dynamic Properties of Polymeric Melt Accessed via Dielectric Spectroscopy

Traditional design principles for heterogeneous catalysis guide the use of catalytic particles with mesosized (∼2–50 nm) pores to increase the number of surface-active sites by way of an increased surface area. However, the entry of long-chain polymers into such pores may be significantly limited by the size and entanglement of polymers in the melt state, thereby decreasing the number of accessible sites. Assessment of catalyst performance from traditional reactor-based studies averages over intrapore reaction events as well as reactions on the surface of a particle, resulting in an inability to distinguish between differences in site accessibility and activity. Techniques that assess the intrapore performance can inform the design of future heterogeneous catalysts for polymer upcycling. In this work, we demonstrate the use of broadband dielectric spectroscopy to monitor depolymerization of a polymer melt within mesopores via changes in the segmental relaxation time scale of amorphous polymer chains. In particular, we highlight the use of an anodic aluminum oxide (AAO) membrane as a readily available model for catalyst pores with a well-characterized pore morphology. The decrease in the segmental relaxation (α-relaxation) time of the melt with increasing chain scission emerges as a measure of the extent of polymer deconstruction inside mesopores. To demonstrate the utility of this technique, we demonstrate the decomposition of two commercial poly(propylene carbonate) polymers with different decomposition rates within mesopores. As the polymers depolymerize, their segmental relaxation time decreases as the molecular weight decreases (as predicted by the Fox–Flory equation). The BDS-measured change in segmental relaxation time mirrors the expected trend based on change in molecular weight measured by size exclusion chromatography.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Confined Crystal Melting in Edgeless Poly( L -lactic acid) Crystalsomes

Polymer single crystals tend to be quasi two-dimensional (2D) lamellae and their small lateral surfaces are the starting points of lamella melting and thickening. However, the recently discovered crystalsomes, which are defined for hollow single crystal-like spherical shells, are edgeless, self-confined, and incommensurate with translational symmetry. Here, this work concerns the structure and melting behavior of these edgeless crystalsomes. Poly(l-lactic acid) crystalsomes were grown using a miniemulsion solution crystallization method. Differential scanning calorimetry and in situ wide-angle X-ray diffraction were used to follow the structural evolution of the crystalsomes upon heating. Our results demonstrated that the structure and melting behavior of crystalsomes are curvature-dependent and significantly different from their flat crystal counterpart.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Pausing ultrafast melting by timed multiple femtosecond-laser pulses

An intense femtosecond-laser excitation of a solid induces highly nonthermal conditions. In materials like silicon, laser-induced bond-softening leads to a highly incoherent ionic motion and eventually nonthermal melting. But is this outcome an inevitable consequence, or can it be controlled? Here, we performed ab initio molecular dynamics simulations of crystalline silicon after timed multiple femtosecond-laser pulse excitations with fluence above the nonthermal melting threshold. Our results demonstrate an excitation mechanism that pauses nonthermal melting and creates a metastable state instead, with an electronic structure similar to the ground state. This mechanism can be generalized to other materials, potentially enabling structural and/or electronic transitions to metastable phases in the high-excitation regime. In addition, our approach could be used to switch off nonthermal contributions in experiments, allowing reliable electron-phonon coupling constants to be obtained more easily.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

Charging-driven coarsening and melting of a colloidal nanoparticle monolayer at an ionic liquid–vacuum interface

In this work, we induce and investigate the coarsening and melting dynamics of an initially static nanoparticle colloidal monolayer at an ionic liquid–vacuum interface, driven by a focused, scanning electron beam. Coarsening occurs through grain interface migration and larger-scale motions such as grain rotations, often facilitated by sliding dislocations. The progressive decrease in area fraction that drives melting of the monolayer is explained using an electrowetting model whereby particles at the interface are solvated once their accumulating charge recruits sufficient counterions to subsume the particle. Subject to stochastic particle removal from the monolayer, melting is recapitulated in simulations with a Lennard-Jones potential. This new driving mechanism for colloidal systems, whose dynamical timescales we show can be controlled with the accelerating voltage, opens the possibility to manipulate particle interactions dynamically without need to vary particle intrinsic properties or surface treatments. Furthermore, the decrease in particle size availed by electron imaging presents opportunities to observe force and time scales in a lesser-explored regime intermediate between typical colloidal and molecular systems.

36 MATERIALS SCIENCE↗