SEARCH · Engineering Papers

Results for “Maturity Model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

All sources NASA NTRS DOE OSTI

DOE OSTI2023

Mesoscale Convective Systems in DYAMOND Global Convection‐Permitting Simulations

Abstract This study examines the deep convection populations and mesoscale convective systems (MCSs) simulated in the DYAMOND (DYnamics of the atmospheric general circulation modeled on non‐hydrostatic domains) winter project. A storm tracking algorithm is applied to six DYAMOND simulations and a global high‐resolution satellite cloud and precipitation data set for comparison. The simulated frequencies of tropical deep convection and organized convective systems vary widely among models and regions, although robust MCSs are generally underestimated. The diurnal cycles of MCS initiation and mature stages are well simulated, but the amplitudes are exaggerated over land. Most models capture the observed MCS lifetime, cloud shield area, rainfall volume and movement speed. However, cloud‐top height and convective rainfall intensity are consistently overestimated, and stratiform rainfall area and amount are consistently underestimated. Possible causes for the model differences compared to observations and implications for future model developments are discussed.

58 GEOSCIENCES↗

DOE OSTI2021

Solar Field Layout and Aimpoint Strategy Optimization

The existing methods that determine heliostat aiming strategies for concentrating solar power (CSP) central receiver plants typically use heuristics and/or are computationally expensive, and they lack flexibility for different desired flux profiles and receiver geometries. Because of the interaction between layout and aimpoint strategy, considering the former without accounting for the latter may yield solutions with superfluous heliostats that cannot be used efficiently without compromising receiver flux constraints. To that end, we develop a software decision tool that uses innovative optimization methods to both optimize aimpoint strategies and improve candidate layouts for the solar collection field of a CSP central receiver plant. A CSP plant’s effectiveness relies on the optical efficiency of the solar field, which may be limited by losses due to (i) the cosine effect, (ii) atmospheric attenuation, (iii) interference (i.e., shading and blocking) between heliostats, (iv) spillage as a result of heliostat positioning and geometry, and (iv) some heliostats’ inability to direct irradiance to the receiver without damage due to excessive thermal flux. The goal of this work is to obtain optimized aiming strategies and improved solar field layouts that reduce capital cost and increase field optical efficiency and utilization, while meeting the power requirements of a given CSP receiver design. We formulate the aimpoint optimization problem as a mixed-integer linear programming model, which we then decompose into submodels that we solve in parallel. The decomposition subdivides the solar field into sections, and aimpoint strategies for each section are obtained independently of the others. To improve existing layouts, we develop a utilization-weighted efficiency metric that we use to relocate heliostats to sections of the solar field with similar efficiency and higher utilization. Finally, to connect our software to high-fidelity flux models, we develop a Python application programming interface for SolarPILOT, a mature software package that characterizes solar field performance and generates the heliostat layouts and flux maps that serve as input to our models.

14 SOLAR ENERGY↗

DOE OSTI2015

Organic matter maturation in the contact aureole of an igneous sill as a tracer of hydrothermal convection: A TRACER OF HYDROTHERMAL CONVECTION

The intrusion of magmas can start hydrothermal convection which in turn enhances the transport of heat and solutes. We use a heat convection model to interpret the temperature evolution documented by organic matter maturation, as recorded by the vitrinite reflectance Rr, in a contact aureole of a 15 m thick basaltic sill in the Deep Sea Drilling Project (DSDP) 41-368 hole near Cape Verde Rise, eastern Atlantic. Here we report on a pronounced asymmetry of variations of Rr with distance above and below the sill that cannot be explained by heat conduction alone. Neglecting the results of possible two-phase flow and thermal pressurization from the production of fluids, convection begins to enhance the observed asymmetry for permeabilities greater than about 1md, and the observations can be matched with permeabilities of at least several tens of millidarcies.

58 GEOSCIENCES↗

DOE OSTI2012

Technology Development: From Idea to Implementation - 12131

There are good ideas and new technologies proposed every day to solve problems within the DOE complex. A process to transition a new technology from inception to the decision to launch a project with baselines is described. Examples from active technology development projects within Savannah River Remediation (SRR) will be used to illustrate the points. The process includes decision points at key junctures leading to preliminary design. At that point, normal project management tools can be employed. The technology development steps include proof-of-principle testing, scaled testing and analysis, and conceptual design. Tools are used that define the scope necessary for each step of technology development. The tools include use of the DOE technology readiness guide, Consolidated Hazards Analysis (CHA) and internal checklists developed by Savannah River Remediation. Integration with operating or planned facilities is also included. The result is a roadmap and spreadsheet that identifies each open question and how it may be answered. Performance criteria are developed that enable simple decisions to be made after the completion of each step. Conceptual design tasks should begin as the technology development continues. The most important conceptual design tasks at this point in the process include process flow diagrams (PFDs), high level Process and Instrumentation Drawings (P and IDs), and general layout drawings. These should influence the design of the scaled simulant testing. Mechanical and electrical drawings that support cost and schedule development should also be developed. An early safety control strategy developed from the CHA will also influence the cost. The combination of test results, calculations and early design output with rough order of magnitude cost and schedule information provide input into the decisions to proceed with a project and data to establish the baseline. This process can be used to mature any new technology, especially those that must be integrated into complicated flow sheets. Then fully informed decisions can be made to usher technology development ideas through project implementation. Examples from active technology development projects, Tank 48 Treatment and Enhanced Chemical Cleaning, are presented. This model for technology development integrates several tools and activities to provide a logical method for maturing new ideas and technologies. It provides a framework to develop a good idea into a full up design/build project. This model defines a set of integrated tasks to mature the technology and define scope, cost and schedule necessary to make business decisions for implementing technology development. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2025

ARM Cloud and Precipitation Measurements and Science Group (CPMSG) 2024 Workshop Report

The mission of the U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) user facility is to improve the understanding and representation of cloud and aerosol processes and their interaction with the Earth's surface in Earth system models (ESMs) by providing comprehensive field observations and supporting advanced data analytics. The ARM Cloud and Precipitation Measurements and Science Group (CPMSG) was chartered in March 2019 to help improve the performance and scientific impact of ARM measurements of clouds and precipitation. The group aims to identify and address gaps in measurement capabilities, maximize the scientific impact of ARM data, and effectively serve the scientific community. To achieve these goals, the group includes experts in cloud and precipitation science, as well as representatives from ARM infrastructure, including instrument mentors, engineers, data quality officers, and data product translators. Prior to CPMSG, early discussions on cloud and precipitation measurements primarily focused on improving radar systems, but have since evolved to include a broader scope involving radiometers and other instruments. Since its formation, the CPMSG has gathered feedback using science traceability matrices. CPMSG aims to keep these as living documents to show the measurement needs, scientific drivers, roadblocks, maturity of measurements and retrievals, and pathways to model improvements. The group meets quarterly to discuss and prioritize measurement and operational improvements.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2025

ARM Cloud and Precipitation Measurements and Science Group (CPMSG) 2024 Workshop Report

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2024

ARM Cloud and Precipitation Measurements and Science Group (CPMSG) 2024 Workshop Report

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2015

Alteration of forest succession and carbon cycling under elevated CO 2

Abstract Regenerating forests influence the global carbon (C) cycle, and understanding how climate change will affect patterns of regeneration and C storage is necessary to predict the rate of atmospheric carbon dioxide (CO 2 ) increase in future decades. While experimental elevation of CO 2 has revealed that young forests respond with increased productivity, there remains considerable uncertainty as to how the long‐term dynamics of forest regrowth are shaped by elevated CO 2 (eCO 2 ). Here, we use the mechanistic size‐ and age‐ structured Ecosystem Demography model to investigate the effects of CO 2 enrichment on forest regeneration, using data from the Duke Forest Free‐Air Carbon dioxide Enrichment (FACE) experiment, a forest chronosequence, and an eddy‐covariance tower for model parameterization and evaluation. We find that the dynamics of forest regeneration are accelerated, and stands consistently hit a variety of developmental benchmarks earlier under eCO 2 . Because responses to eCO 2 varied by plant functional type, successional pathways, and mature forest composition differed under eCO 2 , with mid‐ and late‐successional hardwood functional types experiencing greater increases in biomass compared to early‐successional functional types and the pine canopy. Over the simulation period, eCO 2 led to an increase in total ecosystem C storage of 9.7 Mg C ha ‐1 . Model predictions of mature forest biomass and ecosystem–atmosphere exchange of CO 2 and H 2 O were sensitive to assumptions about nitrogen limitation; both the magnitude and persistence of the ecosystem response to eCO 2 were reduced under N limitation. In summary, our simulations demonstrate that eCO 2 can result in a general acceleration of forest regeneration while altering the course of successional change and having a lasting impact on forest ecosystems.

Miller, Adam D.↗

DOE OSTI2020

Survey and Assessment of Computational Capabilities for Advanced (Non-LWR) Reactor Mechanistic Source Term Analysis.

A vital part of the licensing process for advanced (non-LWR) nuclear reactor developers in the United States is the assessment of the reactor’s source term, i.e., the potential release of radionuclides from the reactor system to the environment during normal operations and accident sequences. In comparison to source term assessments which follow a bounding approach with conservative assumptions, a mechanistic approach to modeling radionuclide transport, which realistically accounts for transport and retention phenomena, is expected to be used for advanced reactor systems. As the designs of advanced reactors increase in maturity and progress towards licensing, there is a need to advance modeling and simulation capabilities in analyzing the mechanistic source term (MST) of a prospective reactor concept. In the present work, a survey is provided of existing computational capabilities for the modeling of advanced reactors MSTs. The following reactors are considered: high temperature gas reactors (HTGR); molten salt reactors (MSR) which include salt-fueled reactors and fluoride salt-cooled high temperature reactors (FHR); and sodium- and lead-cooled fast reactors (SFR, LFR). A review of relevant codes which may be useful in providing information to MST analyses is also completed, including codes that have been used for source term analyses of LWRs, as well as those being developed for other aspects of advanced reactor system modeling such as reactor physics, thermal hydraulics, and chemistry. A discussion of MST modeling capabilities for each reactor type is provided with additional focus on important phenomena and functional requirements. Additionally, a comprehensive survey is provided of tools for consequence modeling such as atmospheric transport and dispersion (ATD).

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2015

Foreword: Additive Manufacturing: Interrelationships of Fabrication, Constitutive Relationships Targeting Performance, and Feedback to Process Control

Additive manufacturing (AM) offers distinct advantages over conventional manufacturing processes including the capability to both build and repair complex part shapes; to integrate and consolidate parts and thus overcome joining concerns; and to locally tailor material compositions as well as properties. Moreover, a variety of fields such as aerospace, military, automotive, and biomedical are employing this manufacturing technique as a way to decrease costs, increase manufacturing agility, and explore novel geometry/functionalities. In order to increase acceptance of AM as a viable processing method, pathways for qualifying both the material and the process need to be developed and, perhaps, standardized. This symposium was designed to serve as a venue for the international AM community—including government, academia, and industry—to define the fundamental interrelationships between feedstock, processing, microstructure, shape, mechanical behavior/materials properties, and function/performance. Eventually, insight into the connections between processing, microstructure, property, and performance will be achieved through experimental observations, theoretical advances, and computational modeling of physical processes. Finally, once this insight matures, AM will be able to move from the realm of making parts to making qualified materials that are certified for use with minimal need for post-fabrication characterization.

36 MATERIALS SCIENCE↗

DOE OSTI2023

THESEUS: A techno-economic design, integration and downselection framework for energy storage

Optimal selection of energy storage technologies is critical to ensure reliable integration of intermittent and often uncertain renewable energy in electricity grids. The consideration of a diverse set of energy storage technologies is required for a more sustainable deployment of energy storage. We present THESEUS (TecHno-Economic framework for Systematic Energy storage Utilization and downSelection), which is a comprehensive framework for the optimal selection, design and operation of energy storage systems. THESEUS includes rigorous models of major energy storage technologies at different maturity levels, such as thermal storage using phase-change materials or molten salt, cryogenic storage, mechanical storage in the form of compressed air and pumped hydro storage, chemical storage using hydrogen, and electrochemical storage in the form of lithium-ion, sodium sulfur and vanadium flow batteries. An illustrative case study on state-wide prospective energy storage shows that storage integration with fossil power plants could reduce the cost of meeting the grid energy demand by 20%, with mechanical storage as the best suited technology. Although high-temperature thermal storage has low storage efficiency, it is optimal for integration with renewable energy plants. In addition, Li-ion batteries are optimal for high ramping but low storage duration requirements. Furthermore, such insights can enable the deployment of both existing and emerging energy storage technologies to facilitate a smooth transition to a clean energy future.

25 ENERGY STORAGE↗

DOE OSTI2015

An alphavirus temperature-sensitive capsid mutant reveals stages of nucleocapsid assembly

Alphaviruses have a nucleocapsid core composed of the RNA genome surrounded by an icosahedral lattice of capsid protein. An insertion after position 186 in the capsid protein produced a strongly temperature-sensitive growth phenotype. Even when the structural proteins were synthesized at the permissive temperature (28 °C), subsequent incubation of the cells at the non-permissive temperature (37 °C) dramatically decreased mutant capsid protein stability and particle assembly. Electron microscopy confirmed the presence of cytoplasmic nucleocapsids in mutant-infected cells cultured at the permissive temperature, but these nucleocapsids were not stable to sucrose gradient separation. In contrast, nucleocapsids isolated from mutant virus particles had similar stability to that of wildtype virus. Our data support a model in which cytoplasmic nucleocapsids go through a maturation step during packaging into virus particles. The insertion site lies in the interface between capsid proteins in the assembled nucleocapsid, suggesting the region where such a stabilizing transition occurs. - Highlights: • We characterize an alphavirus capsid insertion mutation. • These capsid mutants are highly temperature sensitive for growth. • The insertion affects nucleocapsid stability. • Results suggest that the nucleocapsid is stabilized during virus budding.

60 APPLIED LIFE SCIENCES↗

DOE OSTI2021

Time–connectivity superposition and the gel/glass duality of weak colloidal gels

Colloidal gels result from the aggregation of Brownian particles suspended in a solvent. Gelation is induced by attractive interactions between individual particles that drive the formation of clusters, which in turn aggregate to form a space-spanning structure. We study this process in aluminosilicate colloidal gels through time-resolved structural and mechanical spectroscopy. Using the time–connectivity superposition principle a series of rapidly acquired linear viscoelastic spectra, measured throughout the gelation process by applying an exponential chirp protocol, are rescaled onto a universal master curve that spans over eight orders of magnitude in reduced frequency. This analysis reveals that the underlying relaxation time spectrum of the colloidal gel is symmetric in time with power-law tails characterized by a single exponent that is set at the gel point. The microstructural mechanical network has a dual character; at short length scales and fast times it appears glassy, whereas at longer times and larger scales it is gel-like. These results can be captured by a simple three-parameter constitutive model and demonstrate that the microstructure of a mature colloidal gel bears the residual skeleton of the original sample-spanning network that is created at the gel point. Our conclusions are confirmed by applying the same technique to another well-known colloidal gel system composed of attractive silica nanoparticles. The results illustrate the power of the time–connectivity superposition principle for this class of soft glassy materials and provide a compact description for the dichotomous viscoelastic nature of weak colloidal gels.

36 MATERIALS SCIENCE↗

DOE OSTI2015

Projection Microstereolithography for Architected Materials

Stereolithography (SL) is a prominent paradigm in the realm of additive manufacturing (AM) technologies, which refers to fabrication approaches that build “bottom up” by adding material. Pioneered in 1984 by Chuck Hull, SL relies on light-activated solidification of a liquid photosensitive resin in a layer-by-layer fashion, with the geometry of each layer defined by sectioning a three-dimensional (3D) computer model by closely-spaced parallel planes. The maturation of the technology over nearly three subsequent decades has resulted in the wide availability of commercial SL products, such as the ProJet series from 3D Systems, Inc. (which uses the proprietary acronym SLA to refer to SL technology), which routinely produces parts with 50-100 µm resolution in all three axes, and overall dimensions of 0.25-0.5 m. In the most general terms, advancements in SL technology have generally been aimed at achieving four goals: decreasing (1) system cost and (2) minimum feature size (i.e. improving resolution), while (3) increasing overall part size and (4) build speed. SL systems can be broadly categorized into two classes, by the way in which they deliver illumination to produce the shape of each object layer to be fabricated: laser-scanning and mask projection approaches. Commercially-available SL systems incorporate the laser-scanning approach, following the original scheme described by Hull, since digital image projection technology has only emerged relatively recently as a viable alternative. A significant limitation of laser scanning is the relatively slow speed of rastering the laser to form each layer’s pattern, highlighting the need for a dynamic mask-based approach to polymerize larger areas in a single exposure. The recent proliferation of digital display technologies (referred to as spatial light modulators or SLMs) has enabled the implementation of such “dynamic masking,” increasing system throughput by allowing a complete image layer to be cross-linked simultaneously. These mask projection SL systems are gaining greater prominence, and the landscape of some of the parameters available for system design, as implemented in recent work by a variety of investigators, has been reviewed by Lambert et al.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Quantum surrogate models for uncertainty quantification

Surrogate models are a critical ingredient to computation-based design and validation of many DOE mission-relevant physical systems. When first-principles computation of properties of a physical systems becomes pro hibitive, surrogate models are the only path towards achieving tasks such as uncertainty quantification (UQ), exploration of design space, and validation of design choices. In this project we have developed and demonstrated a new surro gate modeling paradigm for complex models that is data-driven, non-intrusive, and has the potential to be versatile and equipped with performance guaran tees. This combination of features is absent in existing surrogate modeling tools. The framework we have developed in this project exploits a quantum-classical correspondence to establish a quantum system that mimics the dynamics of the classical Hamiltonian system from which data in the form of temporal snapshots is provided. Since quantum dynamics propagates distributions over observables, the framework is naturally suited to propagation of epistemic uncertainties in the form of distributions over initial state and parametric uncertainties. In this project, we take the first step in establishing this novel framework by deriving a quantization and de-quantization procedure, demonstrating the accuracy of the quantum surrogate models these define using two model systems, and defining the next steps in maturing the framework towards a tool applicable to Sandia mission-relevant problems.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2016

Towards improved and more routine Earth system model evaluation in CMIP

The Coupled Model Intercomparison Project (CMIP) has successfully provided the climate community with a rich collection of simulation output from Earth system models (ESMs) that can be used to understand past climate changes and make projections and uncertainty estimates of the future. Confidence in ESMs can be gained because the models are based on physical principles and reproduce many important aspects of observed climate. More research is required to identify the processes that are most responsible for systematic biases and the magnitude and uncertainty of future projections so that more relevant performance tests can be developed. At the same time, there are many aspects of ESM evaluation that are well established and considered an essential part of systematic evaluation but have been implemented ad hoc with little community coordination. Given the diversity and complexity of ESM analysis, we argue that the CMIP community has reached a critical juncture at which many baseline aspects of model evaluation need to be performed much more efficiently and consistently. We provide a perspective and viewpoint on how a more systematic, open, and rapid performance assessment of the large and diverse number of models that will participate in current and future phases of CMIP can be achieved, and announce our intention to implement such a system for CMIP6. Accomplishing this could also free up valuable resources as many scientists are frequently "re-inventing the wheel" by re-writing analysis routines for well-established analysis methods. A more systematic approach for the community would be to develop and apply evaluation tools that are based on the latest scientific knowledge and observational reference, are well suited for routine use, and provide a wide range of diagnostics and performance metrics that comprehensively characterize model behaviour as soon as the output is published to the Earth System Grid Federation (ESGF). The CMIP infrastructure enforces data standards and conventions for model output and documentation accessible via the ESGF, additionally publishing observations (obs4MIPs) and reanalyses (ana4MIPs) for model intercomparison projects using the same data structure and organization as the ESM output. This largely facilitates routine evaluation of the ESMs, but to be able to process the data automatically alongside the ESGF, the infrastructure needs to be extended with processing capabilities at the ESGF data nodes where the evaluation tools can be executed on a routine basis. Efforts are already underway to develop community-based evaluation tools, and we encourage experts to provide additional diagnostic codes that would enhance this capability for CMIP. And, at the same time, we encourage the community to contribute observations and reanalyses for model evaluation to the obs4MIPs and ana4MIPs archives. The intention is to produce through the ESGF a widely accepted quasi-operational evaluation framework for CMIP6 that would routinely execute a series of standardized evaluation tasks. Over time, as this capability matures, we expect to produce an increasingly systematic characterization of models which, compared with early phases of CMIP, will more quickly and openly identify the strengths and weaknesses of the simulations. This will also reveal whether long-standing model errors remain evident in newer models and will assist modelling groups in improving their models. Finally, this framework will be designed to readily incorporate updates, including new observations and additional diagnostics and metrics as they become available from the research community.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2021

Probing the subcellular nanostructure of engineered human cardiomyocytes in 3D tissue

Abstract The structural and functional maturation of human induced pluripotent stem cell-derived cardiomyocytes (hiPSC-CMs) is essential for pharmaceutical testing, disease modeling, and ultimately therapeutic use. Multicellular 3D-tissue platforms have improved the functional maturation of hiPSC-CMs, but probing cardiac contractile properties in a 3D environment remains challenging, especially at depth and in live tissues. Using small-angle X-ray scattering (SAXS) imaging, we show that hiPSC-CMs matured and examined in a 3D environment exhibit a periodic spatial arrangement of the myofilament lattice, which has not been previously detected in hiPSC-CMs. The contractile force is found to correlate with both the scattering intensity ( R 2 = 0.44) and lattice spacing ( R 2 = 0.46). The scattering intensity also correlates with lattice spacing ( R 2 = 0.81), suggestive of lower noise in our structural measurement than in the functional measurement. Notably, we observed decreased myofilament ordering in tissues with a myofilament mutation known to lead to hypertrophic cardiomyopathy (HCM). Our results highlight the progress of human cardiac tissue engineering and enable unprecedented study of structural maturation in hiPSC-CMs.

36 MATERIALS SCIENCE↗

DOE OSTI2017

Mechanical properties of neutron-irradiated model and commercial FeCrAl alloys

The development and understanding of the mechanical properties of neutron-irradiated FeCrAl alloys is increasingly a critical need as these alloys continue to become more mature for nuclear reactor applications. This study focuses on the mechanical properties of model FeCrAl alloys and of a commercial FeCrAl alloy neutron-irradiated to up to 13.8 displacements per atom (dpa) at irradiation temperatures between 320 and 382 °C. Tensile tests were completed at room temperature and at 320 °C, and a subset of fractured tensile specimens was examined by scanning electron microscopy. Results showed typical radiation hardening and embrittlement indicative of high chromium ferritic alloys with strong chromium composition dependencies at lower doses. At and above 7.0 dpa, the mechanical properties saturated for both the commercial and model FeCrAl alloys, although brittle cleavage fracture was observed at the highest dose in the model FeCrAl alloy with the highest chromium content (18 wt %). Finally, the results suggest the composition and microstructure of FeCrAl alloys plays a critical role in the mechanical response of FeCrAl alloys irradiated near temperatures relevant to light water reactors.

36 MATERIALS SCIENCE↗