Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MONOCRYSTALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Experimental and computational study of thaumasite structure

The structure of thaumasite has been studied experimentally by means of a single crystal X-ray diffraction and FTIR methods, and theoretically using density functional theory (DFT) method. Very good agreement was achieved between calculated and experimental structural parameters. In addition, calculations offered the refinement of the positions of the hydrogen atoms. The detailed analysis of the hydrogen bonds existing in the thaumasite structure has been performed. Several types of hydrogen bonds have been classified. The water molecules coordinating Ca{sup 2+} cation act as proton donors in moderate O-H···O hydrogen bonds formed with CO₃⁻²and SO₄⁻² anions. The multiple O-H···O hydrogen bonds exist among water molecules themselves. Finally, relatively weak hydrogen bonds form water molecules with the OH groups from the coordination sphere of the Si(OH)₆⁻² anion. Further, calculated vibrational spectrum allowed complete assignment of all vibrational modes which are not available from the experimental spectrum that has a complex structure with overlapped bands, especially below 1500 cm⁻¹. Highlights: • The thaumasite structure was studied experimentally and using DFT method. • We used DFT method for the refinement of the positions of hydrogen atoms. • A detailed analysis of the hydrogen bonds was done. • A complete assignment of all bands to particular types of vibrations was done.

36 MATERIALS SCIENCE↗

Synthesis of monocrystalline Ca{sub 3}SiO{sub 5} using the optical floating zone method

Alite (Ca{sub 3}SiO{sub 5}/C{sub 3}S with low concentrations of foreign ions) is the main constituent of Ordinary Portland Cement. Normally it forms during sintering but with quite low crystal sizes (ca. 30 μm). For experiments on alite hydration behavior monocrystalline grains are required. Due to its incongruent melting behavior and its thermodynamic instability below 1250 °C it is very challenging to obtain large alite single crystals. In the present study, the floating zone method was used for annealing polycrystalline rods of monoclinic and triclinic C{sub 3}S just below the melting point of the phase. Large monocrystalline grains (> 500 μm) of the monoclinic (Al, Mg-doped) and triclinic polymorphs could successfully be obtained. Monocrystallinity was demonstrated by electron backscatter diffraction (EBSD). The chemical composition regarding incorporation of foreign ions and thus the resulting crystallographic modification of the C{sub 3}S can easily be adjusted. Chemical homogeneity of the synthesized monocrystalline grains was proven by electron probe microanalysis (EPMA).

36 MATERIALS SCIENCE↗

The crystal structure of a new calcium aluminate phase containing formate

A new calcium aluminate phase containing formate ions was synthesized and its crystal structure determined. This new phase is indicated as M-phase and was firstly observed in Portland cement pastes hydrated in presence of Ca-formate and in excess of water. The crystal structure of the M-phase was successfully solved in the R-3 space group of the trigonal system on the basis of synchrotron X-ray single crystal diffraction data. The structural model was confirmed by Rietveld refinement of the powder diffraction data acquired on the synthesized pure sample. The crystal structure of the M-phase is similar to that of ettringite, being characterized by columns of AlO{sub 6} octahedra alternating with groups of three edge-sharing CaO{sub 7} polyhedra. The formate ions (HCOO){sup −} share two oxygens with Ca polyhedra and are located in the interspace between the columns. The crystal structure of the M-phase testifies the strong interaction occurring between small organic molecules as formate and the calcium aluminate components of Portland cement.

36 MATERIALS SCIENCE↗

Nanostructural evolution of Al(OH)3 gel formed by the cubic and orthorhombic ye'elimite clinkers of calcium sulfoaluminate cements in an ultra-wide hydration temperature range

This paper investigated the influence of hydration temperature on the nanostructure of the AH{sub 3} phase formed in calcium sulfoaluminate cements. Orthorhombic ye'elimite (st-ye'elimite) and cubic ye'elimite (ss-ye'elimite) were hydrated in an ultra-wide temperature range (5–220 °C). Results showed that the AH{sub 3} phase formed by ss-ye'elimite was always microcrystalline in nature at various curing temperatures (5–130 °C), and transformed into the AlOOH phase at 150 °C and above. However, the AH{sub 3} phase formed by st-ye'elimite grew from a microcrystal to a favorable crystal as the temperature increased, and transformed into the AlOOH phase at 170 °C and above. The nanostructure of hydration products was further investigated using TEM/SAED analysis together with FE-SEM images, directly evidencing that the formed AFm-12 phase was single-crystal in nature, and the formed AH{sub 3} phase was microcrystalline at low temperatures and grew into single-crystal hexagonal prisms with the preferred growth direction along [001] direction at high temperatures.

36 MATERIALS SCIENCE↗

First-principles study of single-crystal uranium mono- and dinitride

We report all-electron relativistic calculations of the electronic and thermodynamic properties of perfect stoichiometric UN and UN{sub 2} single crystals using the spin-polarized density functional theory. The calculated lattice parameters and interatomic distances of the relaxed unit cells are in very good agreement with recent extended X-ray absorption fine structure (EXAFS) and X-ray diffraction (XRD) data. Densities of states and molecular orbitals show the importance of d-f hybridization and p-orbital contributions in the valence band of UN and UN{sub 2}, respectively, while f-orbital character dominates the conduction band of both compounds. The heat capacity of UN derived from the present calculations reproduces calorimetric data within 4% up to 1000 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Recent Advances in High-Growth Rate Single-Crystal CVD Diamond

There have been important advances in microwave plasma chemical vapor deposition (MPCVD) of large single-crystal CVD diamond at high growth rates and applications of this diamond. The types of gas chemistry and growth conditions, including microwave power, pressure, and substrate surface temperatures, have been varied to optimize diamond quality and growth rates. The diamond has been characterized by a variety of spectroscopic and diffraction techniques. We have grown single-crystal CVD diamond over ten carats and above 1 cm in thickness at growth rates of 50-100 {micro}m/h. Colorless and near colorless single crystals up to two carats have been produced by further optimizing the process. The nominal Vickers fracture toughness of this high-growth rate diamond can be tuned to exceed 20 MPa m{sup 1/2} in comparison to 5-10 MPa m{sup 1/2} for conventional natural and CVD diamond. Post-growth high-pressure/high-temperature (HPHT) and low-pressure/high-temperature (LPHT) annealing have been carried out to alter the optical, mechanical, and electronic properties. Most recently, single-crystal CVD diamond has been successfully annealed by LPHT methods without graphitization up to 2200 C and < 300 Torr for periods of time ranging from a fraction of minute to a few hours. Significant changes observed in UV, visible, infrared, and photoluminescence spectra are attributed to changes in various vacancy centers and extended defects.

36 MATERIALS SCIENCE↗

The effect of grain boundaries and adsorbates on the electrical properties of hydrogenated ultra nano crystalline diamond.

The results of a comprehensive study on the temperature dependence of the electrical properties of hydrogenated and air exposed undoped UNCD layers following heating/cooling cycles are presented. The results clearly show that, in contrast to hydrogenated and air exposed single crystal type IIa diamond, which exhibits a clear highly conductive p-type surface layer, the electrical properties of hydrogen and H{sub 2}O exposure of UNCD are determined by the properties of the entire layer. The changes in the electrical conductivity of UNCD as a result of heating are governed by two different processes: (i) Loss of water from the external surface that takes place at about 150 C. This process is reversible, reviving the electrical properties upon exposure to humidity, just like in single crystalline diamond.(ii) Modification of the inter-grain material, which occurs at higher temperatures possibly due to H diffusion and passivation of some dangling bonds in the inter-grain material. This increases the resistivity in an irreversible manner. The conduction mechanism in the inter-grain material is characterized by variable range hopping in band tails thus indirectly proving that the material between the grains is some kind of amorphous carbon.

08 HYDROGEN↗

Single-crystal elasticity of (Mg[subscript 0.9]Fe[subscript 0.1])O to 81 GPa

Ferropericlase is the second most abundant mineral in Earth's lower mantle and knowledge of its elastic properties at relevant conditions is needed to adequately interpret seismic observations in terms of the mineralogy and thermal state of the deep Earth. Here, we report the complete elastic tensor of (Mg{sub 0.9}Fe{sub 0.1})O ferropericlase to 81.2 GPa at room temperature measured by Brillouin spectroscopy and X-ray diffraction in the diamond-anvil cell. Our data indicate that the spin transition of iron between 45 and 63 GPa dramatically affects the longitudinal and off-diagonal elements of the elastic stiffness tensor c{sub 11} and c{sub 12}, whereas it leaves the shear constant c{sub 44} almost unaffected. Based on our results, the spin transition markedly changes the pressure (and temperature) dependence of the compressional and bulk sound velocities and must be taken into account in any attempt to match average radial seismic velocity profiles with mineral physics observations. The different pressure dependence of compressional (and bulk) and shear sound velocities across the high-spin to low-spin (HS-LS) transition implies that the spin transition might be best observed in the v{sub p}/v{sub s} ratio and its pressure (and temperature) derivative. We also point out the possibility that the spin transition leads to an anti-correlated temperature dependence of shear and compressional wave speeds in certain pressure-temperature regimes in Earth's lower mantle.

58 GEOSCIENCES↗

Structure, Charge Distribution, and Electron Hopping Dynamics in Magnetite (Fe3O4) (100) Surfaces from First Principles

For the purpose of improving fundamental understanding of the redox reactivity of magnetite, quantum mechanical calculations were applied to predict Fe2+ availability and electron hopping rates at magnetite (100) surfaces, with and without the presence of adsorbed water. Using a low free energy surface reconstruction (½ Fetet layer relaxed into the Feoct (100) plane), the relaxed outermost layer of both the hydrated and vacuum-terminated surfaces were found to be predominantly enriched in Fe2+ within the octahedral sublattice, irrespective of the presence of adsorbed water. At room temperature, mobile electrons move through the octahedral sublattice by Fe2+-Fe3+ valence interchange small polaron hopping, calculated at 1010-1012 hops/second for bulk and bulk-like (i.e. near-surface) environments. This process is envisioned to control sustainable overall rates of interfacial redox reactions. These rates decrease by up to three orders of magnitude (109 hops/second) at the (100) surface, and no significant difference is observed for vacuum-terminated versus hydrated cases. Slower hopping rates at the surface appear to arise primarily from larger reorganization energies associated with octahedral Fe2+-Fe3+ valence interchange in relaxed surface configurations, and secondarily on local charge distribution patterns surrounding Fe2+-Fe3+ valence interchange pairs. These results suggest that, with respect to the possibility that the rate and extent of surface redox reactions depend on Fe2+ availability and its replenishment rate, bulk electron hopping mobility is an upper-limit for magnetite and slower surface rates may need to be considered as potentially rate-limiting. They also suggest hopping mobilities in magnetite nanoparticles may be slower than for bulk single crystals, towards time-scales amenable to Fe2+-Fe3+ site discrimination by conventional spectroscopic probes.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Heterogeneous Reduction of U6+ by Structural Fe2+ From Theory and Experiment

Computational and experimental studies were performed to explore heterogeneous reduction of U6+ by structural Fe2+ at magnetite (Fe3O4) surfaces. Molecular Fe-Fe-U models representing a uranyl species adsorbed in a biatomic bidentate fashion to an iron surface group were constructed. Various possible charge distributions in this model surface complex were evaluated in terms of their relative stabilities and electron exchange rates using ab initio molecular orbital methods. Freshly-cleaved, single crystals of magnetite with different initial Fe2+/Fe3+ ratios were exposed to uranyl-nitrate solution (pH ~ 4) for 90 hours. X ray photoelectron spectroscopy and electron microscopy indicated the presence of a mixed U6+/U5+ precipitate heterogeneously nucleated and grown on stoichiometric magnetite surfaces, but only the presence of sorbed U6+ and no precipitate on sub-stoichiometric magnetite surfaces. Calculated electron transfer rates indicate that sequential multi-electron uranium reduction is not kinetically limited by conductive electron resupply to the adsorption site. Both theory and experiment point to local structural Fe2+ density and sterically accessible uranium coordination environments as key controls on uranium reduction extent and rate. Uranium incorporation in solid phases where its coordination is constrained to the 6-fold uranate type should widen the stability field of U5+ relative to U6+. If uranium cannot acquire 8 fold coordination then reduction may proceed to U5+ but not necessarily U4+.

58 GEOSCIENCES↗

Structure Stability of Methane Hydrate at High Pressures

The structural stability of methane hydrate under pressure at room temperature was examined by both in-situ single-crystal and powder X-ray diffraction techniques on samples with structure types I, II, and H in diamond-anvil cells. The diffraction data for types II (sII) and H (sH) were refined to the known structures with space groups Fd3m and P6{sub 3}/mmc, respectively. Upon compression, sI methanehydrate transforms to the sII phase at 120 MPa, and then to the sH phase at 600 MPa. The sII methanehydrate was found to coexist locally with sI phase up to 500 MPa and with sH phase up to 600 MPa. The pure sH structure was found to be stable between 600 and 900 MPa. Methanehydrate decomposes at pressures above 3 GPa to form methane with the orientationally disordered Fm3mstructure and ice VII (Pn3m). The results highlight the role of guest (CH{sub 4})-host (H{sub 2}O) interactions in the stabilization of the hydratestructures under pressure.

03 NATURAL GAS↗

Mineralogy under extreme conditions

We have performed measurements of minerals based on the synchrotron source for single crystal and powder X-ray diffraction, inelastic scattering, spectroscopy and radiography by using diamond anvil cells. We investigated the properties of iron (Fe), iron-magnesium oxides (Fe, Mg)O, silica(SiO{sub 2}), iron-magnesium silicates (Fe, Mg)SiO{sub 3} under simulated high pressure-high temperature extreme conditions of the Earth's crust, upper mantle, low mantle, core-mantle boundary, outer core, and inner core. The results provide a new window on the investigation of the mineral properties at Earth's conditions.

58 GEOSCIENCES↗

Reactivity studies of a pseudo three-coordinate vanadium(II) complex: Synthesis of terminal oxo and sulfido complexes of vanadium(IV) and S-S and Se-Se reductive bond cleavage reactions

Terminal oxo and sulfido complexes in the form of (nacnac)V=E(Ntol 2 ) (nacnac = [ArNC(CH 3 )] 2 CH - , Ar = 2,6-(CHMe 2 ) 2 C 6 H 3 , Ntol 2 = - N(C 6 H 4 -4-Me), E = O (1), S (2)) were isolated from treatment of the masked three-coordinate vanadium(II) complex, (nacnac)V(Ntol 2 ), with C 5 H 5 NO and S 8 , respectively. Both vanadium(IV) species, 1 and 2, have been characterized by room temperature X-band EPR spectroscopic studies, and in the case of complex 1, a single crystal molecular structure confirmed the presence of a terminal oxo moiety. Moreover, reaction of (nacnac)V(Ntol 2 ) with diphenyl-disulfide and diphenyl-diselenide results in the reductive cleavage of these compounds to produce the vanadium(III) complexes (nacnac)V(XPh)(Ntol 2 ) (X = S, (3), Se (4)). A molecular structure of the phenylsulfide complex, 3, confirmed formation of the d 2 complex resulting from reductive cleavage of the S-S bond.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Polychromatic Microdiffraction Analysis of Defect Self-Organization in Shock Deformed Single Crystals

A spatially resolved X-ray diffraction method - with a submicron 3D resolution together with SEM and OIM analysis are applied to understand the arrangements of voids, geometrically necessary dislocations and strain gradient distributions in samples of Al (1 2 3) and Cu (0 0 1) single crystals shocked to incipient spallation fracture. We describe how geometrically necessary dislocations and the effective strain gradient alter white beam Laue patterns of the shocked materials. Several distinct structural zones are observed at different depths under the impact surface. The density of geometrically necessary dislocations (GNDs) is extremely high near the impact and back surface of the shock recovered crystals. The spall region is characterized by a large density of mesoscale voids and GNDs. The spall region is separated from the impact and back surfaces by compressed regions with high total dislocation density but lower GNDs density. Self-organization of shear bands is observed in the shock recovered Cu single crystal.

36 MATERIALS SCIENCE↗

Molecular Beam Epitaxy on Gas Cluster Ion Beam Prepared GaSb Substrates: Towards Improved Surfaces and Interfaces

A key problem in producing mid-infrared optoelectronic and low-power electronic devices in the GaSb material system is the lack of substrates with appropriate surfaces for epitaxial growth. Chemical mechanical polishing (CMP) of GaSb results in surface damage accompanied by tenacious oxides that do not easily desorb. To overcome this, we have developed a process using gas cluster ion beams (GCIB) to remove surface damage and produce engineered surface oxides. In this paper, we present surface modification results on GaSb substrates using O2-, CF4/O2-, and HBr-GCIB processes. X-ray photoelectron spectroscopy of GCIB produced surface layers showed the presence of mixed Ga- and Sb-oxides, with mostly Ga-oxides at the interface, desorbing at temperatures ranging 530°C to 560°C. Cross-sectional transmission electron microscopy of molecular beam epitaxy grown GaSb/AlGaSb layers showed that GCIB surfaces yielded smooth defect free substrate to epi transitions as compared to CMP surfaces. Furthermore, HBr-GCIB surfaces exhibited neither dislocation layers nor discernable interfaces, indicating complete oxide desorbtion prior to epigrowth on a clean single crystal template. Atomic force microscopy of GCIB epilayers exhibited smooth surfaces with characteristic step-terrace formations comprising monatomic steps and wide terraces. The HBr-GCIB process can be easily adapted to a large scale manufacturing process for epi-ready GaSb.

36 MATERIALS SCIENCE↗

Seeded Growth of AlN Bulk Crystals in m- and c-orientation

Seeded growth of AlN boules was achieved on m-(1 0 1{sup -} 0) and c-(0 0 0 1{sup -}) orientations by physical vapor transport (PVT). The single crystalline m- and c-plane seeds were cut from freestanding AlN single crystals. AlN boules 12 mm in diameter and 7 mm in height were grown at source temperatures around 2280 C in N{sub 2} atmosphere at 500 Torr of total pressure. Under identical process conditions, the m- and c-plane boules exhibited the same growth rates, 150-170 {micro}m/h, and similar expansion angles, 22-27{sup o}, which indicated that the growth was controlled by the thermal profile inside the crucible rather than by crystallographic differences. X-ray rocking curve analysis and Raman spectroscopy confirmed that both m- and c-plane grown crystals possessed high crystalline quality. The dislocation density in both crystals was non-uniform and in the range 102-105 cm{sup -2}, as characterized by X-ray topography.

36 MATERIALS SCIENCE↗

Single crystal growth of Ga[subscript 2](Se[subscript x]Te[subscript 1;#8722;x])[subscript 3] semiconductors and defect studies via positron annihilation spectroscopy

Small single crystals of Ga{sub 2}(Se{sub x}Te{sub 1-x}){sub 3} semiconductors, for x = 0.1, 0.2, 0.3, were obtained via modified Bridgman growth techniques. High resolution powder x-ray diffractometry confirms a zincblende cubic structure, with additional satellite peaks observed near the (111) Bragg line. This suggests the presence of ordered vacancy planes along the [111] direction that have been previously observed in Ga{sub 2}Te{sub 3}. Defect studies via positron annihilation spectroscopy show an average positron lifetime of {approx} 400 ps in bulk as-grown specimens. Such a large lifetime suggests that the positron annihilation sites in these materials are dominated by defects. Moreover, analyzing the electron momenta via coincidence Doppler broadening measurements suggests a strong presence of large open-volume defects, likely to be vacancy clusters or voids.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Crystal Structure of the Membrane Fusion Protein CusB from Escherichia coli

Gram-negative bacteria, such as Escherichia coli, frequently utilize tripartite efflux complexes belonging to the resistance-nodulation-division family to expel diverse toxic compounds from the cell. These systems contain a periplasmic membrane fusion protein (MFP) that is critical for substrate transport. We here present the x-ray structures of the CusB MFP from the copper/silver efflux system of E. coli. This is the first structure of any MFPs associated with heavy-metal efflux transporters. CusB bridges the inner-membrane efflux pump CusA and outer-membrane channel CusC to mediate resistance to Cu{sup +} and Ag{sup +} ions. Two distinct structures of the elongated molecules of CusB were found in the asymmetric unit of a single crystal, which suggests the flexible nature of this protein. Each protomer of CusB can be divided into four different domains, whereby the first three domains are mostly {beta}-strands and the last domain adopts an entirely helical architecture. Unlike other known structures of MFPs, the {alpha}-helical domain of CusB is folded into a three-helix bundle. This three-helix bundle presumably interacts with the periplasmic domain of CusC. The N- and C-termini of CusB form the first {beta}-strand domain, which is found to interact with the periplasmic domain of the CusA efflux pump. Atomic details of how this efflux protein binds Cu{sup +} and Ag{sup +} were revealed by the crystals of the CusB-Cu(I) and CusB-Ag(I) complexes. The structures indicate that CusB consists of multiple binding sites for these metal ions. These findings reveal novel structural features of an MFP in the resistance-nodulation-division efflux system and provide direct evidence that this protein specifically interacts with transported substrates.

36 MATERIALS SCIENCE↗