Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETIC REYNOLDS NUMBER”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Anisotropic magnetohydrodynamic turbulence in a strong external magnetic field

A strong external dc magnetic field introduces a basic anisotropy into incompressible magnetohydrodynamic turbulence. The modifications that this is likely to produce in the properties of the turbulence are explored for the high Reynolds number case. The conclusion is reached that the turbulent spectrum splits into two parts: an essentially two dimensional spectrum with both the velocity field and magnetic fluctuations perpendicular to the dc magnetic field, and a generally weaker and more nearly isotropic spectrum of Alfven waves. A minimal characterization of the spectral density tensors is given. Similarities to measurements from the Culham-Harwell Zeta pinch device and the UCLA Macrotor Tokamak are remarked upon, as are certain implications for the Belcher and Davis measurements of magnetohydrodynamic turbulence in the solar wind.

Montgomery, D.↗
NASA NTRS1981

Anisotropic magnetohydrodynamic turbulence in a strong external magnetic field

A strong external dc magnetic field introduces a basic anisotropy in incompressible MHD turbulence. The modifications that this is likely to produce in the properties of the turbulence are investigated for high Reynolds numbers. It is found that the turbulent spectrum splits into two parts: (1) an essentially two-dimensional spectrum with both the velocity field and the magnetic fluctuations perpendicular to the dc magnetic field, and (2) a generally weaker and more nearly isotropic spectrum of Alfven waves. These results are discussed in relation to measurements from the Culham-Harwell Zeta pinch device and the UCLA Macrorotor tokamak, as well as in relation to measurements of MHD turbulence in the solar wind.

Montgomery, D.↗
DOE OSTI2010

Multichannel Langmuir probe for turbulence study in Heliotron J

New multichannel Langmuir probe system was developed and installed to Heliotron J. The objective of the new probe is to characterize basic turbulence property and the resulting transport in advanced helical configuration. The probe developed here consists of four sets of triple probe and one pin for floating potential measurement. Initial experiments in neutral beam heating plasma were conducted and fluctuation profile of radial and poloidal electric fields and Reynolds stress were estimated. For precise evaluation of the electric fields and Reynolds stress, a technique to compensate radial change of tilt angle between probe array and magnetic surface was proposed and applied to the initial results obtained in edge region of Heliotron J where the complicated magnetic structure exists.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2010

Dynamo Transition

In this article we review the experimental and numerical results related to the dynamo transitions. Recent experiments of Von Karman Sodium (VKS) exhibit various dynamo states including constant, time-periodic, and chaotic magnetic fields. Similarly pseudospectral simulations of dynamo show constant, time-periodic, quasiperiodic, and chaotic magnetic field configurations. One of the windows for the magnetic Prandtl number of unity shows period doubling route to chaos. Quasiperiodic route to chaos has been reported for the Prandtl number of 0.5. The dynamo simulations also reveal coexisting multiple attractors that were obtained for different initial conditions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2012

ROSSBY WAVE INSTABILITY AT DEAD ZONE BOUNDARIES IN THREE-DIMENSIONAL RESISTIVE MAGNETOHYDRODYNAMICAL GLOBAL MODELS OF PROTOPLANETARY DISKS

It has been suggested that the transition between magnetorotationally active and dead zones in protoplanetary disks should be prone to the excitation of vortices via Rossby wave instability (RWI). However, the only numerical evidence for this has come from alpha disk models, where the magnetic field evolution is not followed, and the effect of turbulence is parameterized by Laplacian viscosity. We aim to establish the phenomenology of the flow in the transition in three-dimensional resistive-magnetohydrodynamical models. We model the transition by a sharp jump in resistivity, as expected in the inner dead zone boundary, using the PENCIL CODE to simulate the flow. We find that vortices are readily excited in the dead side of the transition. We measure the mass accretion rate finding similar levels of Reynolds stress at the dead and active zones, at the {alpha} Almost-Equal-To 10{sup -2} level. The vortex sits in a pressure maximum and does not migrate, surviving until the end of the simulation. A pressure maximum in the active zone also triggers the RWI. The magnetized vortex that results should be disrupted by parasitical magneto-elliptic instabilities, yet it subsists in high resolution. This suggests that either the parasitic modes are still numerically damped or that the RWI supplies vorticity faster than they can destroy it. We conclude that the resistive transition between the active and dead zones in the inner regions of protoplanetary disks, if sharp enough, can indeed excite vortices via RWI. Our results lend credence to previous works that relied on the alpha-disk approximation, and caution against the use of overly reduced azimuthal coverage on modeling this transition.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1979

Cryogenic wind tunnel activities at the University of Southampton

The characteristics and behavior of a 0.3m transonic cryogenic wind tunnel are discussed. The wide band of usable Reynolds numbers is analyzed along with a flow visualization technique using propane. The combination of magnetic suspension with the cryogenic wind tunnel is described. An outline of the circuit showing the locations of the magnet system and the features of the tunnel are presented.

Goodyer, M. J.↗
NASA NTRS1976

Magnetic suspension techniques for large scale aerodynamic testing

The potential utility of magnetic suspension techniques is discussed in the context of current efforts towards realistic aerodynamic simulation in wind tunnels. Design parameters are defined and problems of constructing large size facilities identified. A three stage strategy towards realizing a truly large scale magnetic suspension and balance with full research capability is outlined. Stage one, consisting of building and testing a prototype superconductor coil system to establish the feasibility of the concept has been completed successfully and its principal results are briefly described. This proven feasibility of using superconductors for magnetic suspensions, together with the successful demonstration of the cryogenic wind tunnel concept, appear to have opened the way to clean tunnel, high-Re aerodynamic testing. Results of a comparative analysis of scaling of several coil technologies for a specific magnetic suspension configuration, from the prototype size to a size compatible with the projected high Reynolds number cryogenic wind tunnel facility, are discussed in some detail.

Zapata, R. N.↗
DOE OSTI2015

Flux-driven simulations of turbulence collapse

Using three-dimensional nonlinear simulations of tokamak turbulence, we show that an edge transport barrier (ETB) forms naturally once input power exceeds a threshold value. Profiles, turbulence-driven flows, and neoclassical coefficients are evolved self-consistently. A slow power ramp-up simulation shows that ETB transition is triggered by the turbulence-driven flows via an intermediate phase which involves coherent oscillation of turbulence intensity and E×B flow shear. A novel observation of the evolution is that the turbulence collapses and the ETB transition begins when R{sub T} > 1 at t = t{sub R} (R{sub T}: normalized Reynolds power), while the conventional transition criterion (ω{sub E×B}>γ{sub lin} where ω{sub E×B} denotes mean flow shear) is satisfied only after t = t{sub C} ( >t{sub R}), when the mean flow shear grows due to positive feedback.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2015

Large-scale convective instability in an electroconducting medium with small-scale helicity

A large-scale instability occurring in a stratified conducting medium with small-scale helicity of the velocity field and magnetic fields is detected using an asymptotic many-scale method. Such a helicity is sustained by small external sources for small Reynolds numbers. Two regimes of instability with zero and nonzero frequencies are detected. The criteria for the occurrence of large-scale instability in such a medium are formulated.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2014

NuSTAR study of hard X-ray morphology and spectroscopy of PWN G21.5–0.9

We present NuSTAR high-energy X-ray observations of the pulsar wind nebula (PWN)/supernova remnant G21.5–0.9. We detect integrated emission from the nebula up to ∼40 keV, and resolve individual spatial features over a broad X-ray band for the first time. The morphology seen by NuSTAR agrees well with that seen by XMM-Newton and Chandra below 10 keV. At high energies, NuSTAR clearly detects non-thermal emission up to ∼20 keV that extends along the eastern and northern rim of the supernova shell. The broadband images clearly demonstrate that X-ray emission from the North Spur and Eastern Limb results predominantly from non-thermal processes. We detect a break in the spatially integrated X-ray spectrum at ∼9 keV that cannot be reproduced by current spectral energy distribution models, implying either a more complex electron injection spectrum or an additional process such as diffusion compared to what has been considered in previous work. We use spatially resolved maps to derive an energy-dependent cooling length scale, L(E)∝E{sup m} with m = –0.21 ± 0.01. We find this to be inconsistent with the model for the morphological evolution with energy described by Kennel and Coroniti. This value, along with the observed steepening in power-law index between radio and X-ray, can be quantitatively explained as an energy-loss spectral break in the simple scaling model of Reynolds, assuming particle advection dominates over diffusion. This interpretation requires a substantial departure from spherical magnetohydrodynamic, magnetic-flux-conserving outflow, most plausibly in the form of turbulent magnetic-field amplification.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2010

Double tearing mode induced by parallel electron viscosity in tokamak plasmas

The linear behaviors of the double tearing mode (DTM) mediated by parallel electron viscosity in cylindrical plasmas with reversed magnetic shear and thus two resonant rational flux surfaces is numerically investigated. The distance between the two surfaces is found to play an important role for modes with poloidal mode number m>1. Two modes, one of which is centered at the inner rational surface and the other is located between the two surfaces, are simultaneously unstable and the growth rates show the standard single tearing mode (STM) scaling as {gamma}{proportional_to}R{sup -1/3} when the distance is large (here, the Reynolds number R{identical_to}{tau}{sub {upsilon}/{tau}h}, {tau}{sub {upsilon},} and {tau}{sub h} are, respectively, the viscosity penetration time of the magnetic field and the Alfven time for a plasma sheet of width a). The latter is unstable only and the growth rate transits to the standard DTM scaling as {gamma}{proportional_to}R{sup -1/5} for low-m (e.g., m<4) modes and keeps the STM scaling {gamma}{proportional_to}R{sup -1/3} for high-m (e.g., m{approx}10) modes, which are found dominant, when the distance is decreased. In contrast, two unstable modes extending from plasma center to the two rational surfaces, respectively, coexist and the growth rates always show the scaling of {gamma}{proportional_to}R{sup -1/5}, independent of the distance, when the poloidal mode number m=1. The DTMs mediated by electron viscosity are enhanced by plasma resistivity of the range where the growth rate of the mode induced by the latter alone is comparable with that mediated by the former alone and vice versa. Otherwise, the growth rate of the mode is equal to the higher of the modes mediated by resistivity or electron viscosity alone when both of them are taken into account.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1995

Nearly sonic and transsonic convective motions in the solar atmosphere related to the solar wind origin

MHD equations are considered for the solar atmosphere. 15 different simplest MHD regimes are indicated for the momentum transport equation depending on the mutual binary interplay between 6 possible and locally dominant terms: non-stationarity and inhomogeneity of the flow, gas pressure, magnetic tensions, viscous and gravity forces. These regimes are delimited by five physically independent dimensionless parameters, for example, Strouhal, sonic Mach, alfvenic Mach, Reynolds and Froude numbers or their combinations. Another partially overlapping classification of the simplest regimes may be introduced based on the energy conservation equation. There are also 15 independent binary combinations between nonstationary and inhomogeneous convective terms, dissipative energy sinks and sources (viscous, heat-conductive, Joule and radiative ones) in the energy equation. More complicated regimes are considered with multiple dominated terms. All these MHD regimes play their important role somewhere in the solar atmosphere complicated by the tensor transport coefficients in the magnetically dominated regions of the upper atmosphere. Nearly sonic and transsonic nonstationary convective motions with ascending and descending flows are observed in the solar chromosphere. the transition region and the lower pans of the solar corona together with related horizontal velocity components. This convection represents a kind of the 'cocoonery' manufacturing nonstationary vortices generated here and partially connected to the photosphere and to the solar wind. The solar wind originates from this powerful transsonic muddle in the solar atmosphere as a tiny fraction of the streamlines which are temporarily getting detached from the 'cocoons; and going to the infinity. The topologically complicated instantaneous 'runaway surface' around the Sun, i.e., the surface which separates outgoing to the infinity streams from other finite flows in the solar atmosphere was not described in the literature and needs additional investigation. We conclude that a simple one-connected smooth and quasistationary 'critical surface' which is often supposed to be placed somewhere in the solar corona (say, at 4 solar radii) in reality does not exist. Observational and theoretical arguments favor instead of this a highly structured, disordered, patched and time-dependent sonic transition surface in the solar atmosphere permanently fluctuating at positional dependent heights starting sometimes from photospheric (and maybe subphotospheric) levels and more frequently from the chromosphenc network up to several solar radii in the solar corona.

Veselovsky, I. S.↗
DOE OSTI2022

Toward full simulations for a liquid metal blanket: part 2. Computations of MHD flows with volumetric heating for a PbLi blanket prototype at Ha ~10 4 and Gr ~10 12

On the pathway toward full simulations for a liquid metal (LM) blanket, this part 2 extends a previous study of purely magnetohydrodynamic (MHD) flows in a DCLL blanket in reference Chen et al (2020 Nucl. Fusion 60 076003) to more general conditions when the MHD flow is coupled with heat transfer. The simulated prototypic blanket module includes all components of a real LM blanket system, such as supply ducts, inlet and outlet manifolds, multiple poloidal ducts and a U-turn zone. Volumetric heating generated by fusion neutrons is added to simulate thermal effects in the flowing lead–lithium (PbLi) breeder. The MHD flow equations and the energy equation are solved with a DNS-type finite-volume code ‘MHD-UCAS’ on a very fine mesh of 470 × 10 6 cells. The applied magnetic field is 5 T (Hartmann number Ha ~ 10 4 ), the PbLi velocity in the poloidal ducts is 10 cm s –1 (Reynolds number Re ~10 5 ), whereas the maximum volumetric heating is 30 MW m –3 (Grashof number Gr ~ 10 12 ). Four cases have been simulated, including forced- and mixed-convection flows, and either an electrically conducting or insulating blanket structure. Various comparisons are made between the four computed cases and also against the purely MHD flows computed earlier in reference Chen et al (2020 Nucl. Fusion 60 076003) with regards to the (1) MHD pressure drop, (2) flow balancing, (3) temperature field, (4) flows in particular blanket components, and (5) 3D and turbulent flow effects. The strongest buoyancy effects were found in the poloidal ducts. In the electrically non-conducting blanket, the buoyancy forces lead to significant modifications of the flow structure, such as formation of reverse flows, whereas their effect on the MHD pressure drop is relatively small. In the electrically conducting blanket case, the buoyancy effects on the flow and MHD pressure drop are almost negligible.

Physics↗
NASA NTRS2000

High-Lift Flight Tunnel - Phase II Report

The High-Lift Flight Tunnel (HiLiFT) concept is a revolutionary approach to aerodynamic ground testing. This concept utilizes magnetic levitation and linear motors to propel an aerodynamic model through a tube containing a quiescent test medium. This medium (nitrogen) is cryogenic and pressurized to achieve full flight Reynolds numbers higher than any existing ground test facility world-wide for the range of 0.05 to 0.50 Mach. The results of the Phase II study provide excellent assurance that the HiLiFT concept will provide a valuable low-speed, high Reynolds number ground test facility. The design studies concluded that the HiLiFT facility is feasible to build and operate and the analytical studies revealed no insurmountable difficulties to realizing a practical high Reynolds number ground test facility. It was determined that a national HiLiFT facility, including development, would cost approximately $400M and could be operational by 2013 if fully funded. Study participants included National Aeronautics and Space Administration Langley Research Center as the Program Manager and MSE Technology Applications, Inc., (MSE) of Butte, Montana as the prime contractor and study integrator. MSE#s subcontractors included the University of Texas at Arlington for aerodynamic analyses and the Argonne National Laboratory for magnetic levitation and linear motor technology support.

Lofftus, David↗
NASA NTRS2007

Shell Models of RMHD Turbulence and the Heating of Solar Coronal Loops

A simplified nonlinear numerical model for the development of incompressible magnetohydrodynamics in the presence of a strong magnetic field B|| and stratification, nicknamed 'Shell-Atm,' is presented. In planes orthogonal to the mean field, the nonlinear incompressible dynamics is replaced by two-dimensional shell models for the complex variables u and b, allowing one to reach large Reynolds numbers while at the same time carrying out sufficiently long integrations to obtain good statistics at moderate computational cost. The shell models of different planes are coupled by Alfve'n waves propagating along B||. The model may be applied to open or closed magnetic field configurations where the axial field dominates and the plasma pressure is low; here we apply it to the specific case of a magnetic loop of the solar corona heated by means of turbulence driven by photospheric motions, and we use statistics for its analysis. The Alfven waves interact nonlinearly and form turbulent spectra in the directions perpendicular and, through propagation, also parallel to the mean field. A heating function is obtained and shown to be intermittent; the average heating is consistent with values required for sustaining a hot corona and is proportional to the aspect ratio of the loop to the -1.5 power, and haracteristic properties of heating events are distributed as power laws. Crosscorrelations show a delay of dissipation compared with energy content.

corona↗
DOE OSTI2015

MULTI-PARAMETRIC STUDY OF RISING 3D BUOYANT FLUX TUBES IN AN ADIABATIC STRATIFICATION USING AMR

We study the buoyant rise of magnetic flux tubes embedded in an adiabatic stratification using two-and three-dimensional, magnetohydrodynamic simulations. We analyze the dependence of the tube evolution on the field line twist and on the curvature of the tube axis in different diffusion regimes. To be able to achieve a comparatively high spatial resolution we use the FLASH code, which has a built-in Adaptive Mesh Refinement (AMR) capability. Our 3D experiments reach Reynolds numbers that permit a reasonable comparison of the results with those of previous 2D simulations. When the experiments are run without AMR, hence with a comparatively large diffusivity, the amount of longitudinal magnetic flux retained inside the tube increases with the curvature of the tube axis. However, when a low-diffusion regime is reached by using the AMR algorithms, the magnetic twist is able to prevent the splitting of the magnetic loop into vortex tubes and the loop curvature does not play any significant role. We detect the generation of vorticity in the main body of the tube of opposite sign on the opposite sides of the apex. This is a consequence of the inhomogeneity of the azimuthal component of the field on the flux surfaces. The lift force associated with this global vorticity makes the flanks of the tube move away from their initial vertical plane in an antisymmetric fashion. The trajectories have an oscillatory motion superimposed, due to the shedding of vortex rolls to the wake, which creates a Von Karman street.

79 ASTRONOMY AND ASTROPHYSICS↗