Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETIC PROPERTIES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

The annealing temperature dependences of microstructures and magnetic properties in electro-chemical deposited CoNiFe thin films

CoNiFe thin films with various compositions had been successfully fabricated using electro-chemical deposition method. The crystal structure of Co{sub 65}Ni{sub 15}Fe{sub 20}, Co{sub 62}Ni{sub 15}Fe{sub 23}, and Co{sub 55}Ni{sub 15}Fe{sub 30} thin films was fcc, bcc-fcc mix, and bcc, respectively. The difference crystal structure results the difference in magnetic properties. The saturation magnetic flux density (Bs) of Co{sub 65}Ni{sub 15}Fe{sub 20}, Co{sub 62}Ni{sub 15}Fe{sub 23}, and Co{sub 55}Ni{sub 15}Fe{sub 30} thin films was 1.89 T, 1.93 T, and 2.05 T, respectively. An optimal annealing temperature was determined for controlling the microstructure and magnetic properties of CoNiFe thin films. Depending on annealing temperature, the ratio of bcc and fcc structure varied without changing the film composition. By annealing at temperature of T ≥ 350°C, the intensity ratio of X-ray diffraction peaks for bcc(110) to fcc(111) increased. The increase of phase ratio of bcc(110) to fcc(111) caused the increase of Bs, from 1.89 T to 1.95 T. Coercivity (Hc) also increased after annealing, from 2.6 Oe to 18.6 Oe for fcc phase thin films, from 2.0 Oe to 12.0 Oe for fcc-bcc mix phase thin films, and 7.8 Oe to 8 Oe for bcc phase thin films. The changing crystal structures during annealing process indicated that the thermal treatment at high temperature cause the changing crystallinity and atomic displacement. The TEM bright-field images with corresponding selected-area electron diffraction (SAED) patterns showed that there are strongly effects of thermal annealing on the size of fcc and bcc phase crystalline grain as described by size of individual spot and discontinuous rings. The size of crystalline grains increased by thermal annealing. The evolution of bcc and fcc structures of CoNiFe during annealing is though to be responsible for the change of magnetic properties.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Epitaxial Fe-Ge thin films on Ge(111): Morphology, structure, and magnetic properties versus stoichiometry

We have studied the growth and magnetic properties of thin Fe-Ge films synthesized (codeposited at room temperature and postannealed at 250 deg. C) on Ge(111) wafers versus stoichiometry. Morphology and crystal structure have been investigated in situ by means of scanning tunneling microscopy, low-energy electron diffraction, and x-ray photoelectron diffraction and ex situ with x-ray diffraction. The magnetic properties were characterized ex situ by conventional polar and longitudinal magneto-optical Kerr effect and transverse biased initial inverse susceptibility and torque measurements. It is found that the growth is epitaxial for Ge content up to approx48 at. % (approxFe{sub 1.1}Ge composition). In particular, the film is homogeneous and flat and adopts a crystalline structure of hexagonal symmetry derived from the B8{sub 2} (Ni{sub 2}In) structure over a wide stoichiometry range extending from Fe{sub 2}Ge to Fe{sub 1.1}Ge. The epitaxial orientation between the Ge substrate and the germanide layer is (0001)Fe-Ge||(111)Ge with [1120]Fe-Ge||110]Ge. We found however that the surface periodicity and the out-of-plane lattice parameter c evolve within this stoichiometry range and two distinct stoichiometry regimes appear on both sides of a critical stoichiometry (approxFe{sub 1.5}Ge). Indeed, from Fe{sub 2}Ge to Fe{sub 1.5}Ge the surface periodicity is p(2x2) and c continuously decreases with Fe content, whereas from Fe{sub 1.5}Ge to Fe{sub 1.1}Ge the surface periodicity is (sq root(3)xsq root(3))R30 deg. and c remains constant. These features have been interpreted as a clear fingerprint of a minor transformation of the crystalline structure but without any change in symmetry. This structural order transformation is discussed in relation to previous results reported in the case of macroscopic single-crystal Fe-Ge ingots. On both sides of the wide [Fe{sub 2}Ge,Fe{sub 1.1}Ge] composition range the layer is no more homogeneous. More precisely, for higher Fe content the film contains both the above mentioned Ni{sub 2}In-derived phase and a Fe-richer phase (probably bcc Fe) whereas for higher Ge content the layer is amorphous. Magnetic characterization showed in particular that the homogeneous Ni{sub 2}In-derived epilayers are ferromagnetic with a Curie temperature that varies drastically with the stoichiometry, rising up to a high T{sub C} value of approx450 K for the Fe-rich Fe{sub 1.9}Ge composition. Finally, whatever the stoichiometry, the magnetic easy axis of the homogeneous phase lies in the film plane and a small uniaxial anisotropy is superimposed on a sixfold order one that results from the hexagonal symmetry of the crystallographic structure.

36 MATERIALS SCIENCE↗

Effect of Cr and Mn ions on the structure and magnetic properties of GaFeO{sub 3}: Role of the substitution site

Effect of substitution of Cr and Mn in the Fe and Ga sites of GaFeO{sub 3} on the structural parameters and magnetic properties has been investigated by preparing GaFe{sub 1-x}Cr{sub x}(Mn{sub x})O{sub 3} and Ga{sub 1-x}Cr{sub x}(Mn{sub x})FeO{sub 3} starting with appropriate oxide precursors. It is shown that, starting with Cr or Mn substituted Ga{sub 2}O{sub 3}, one obtains Ga{sub 1-x}Cr{sub x}(Mn{sub x})FeO{sub 3}, while reaction of Cr or Mn substituted {alpha}-Fe{sub 2}O{sub 3} with Ga{sub 2}O{sub 3} yields GaFe{sub 1-x}Cr{sub x}(Mn{sub x})O{sub 3}. The structural parameters and magnetic properties vary significantly with the substitution site of Cr showing a large decrease in the unit cell parameters as well as the T{sub C} and other magnetic properties when the substitution is at the octahedral Fe (1, 2) site. Substitution of Cr at the octahedral Ga2 site results in marginal changes. Substitution of Mn in the Ga and Fe sites also show differences although the changes themselves are much smaller. First-principles calculations confirm such site-specificity and show how Cr substitution affects the properties differently when substituted at the Ga2 and Fe1 sites. - Graphical abstract: The important role of site-specific substitution of transition metal ions on the structure and magnetic properties of GaFeO{sub 3} has been investigated experimentally and theoretically. Highlights: > Substitution of transition metal ions to specific cation site. > Ionic radii of the cation dictate the disorder associated with the specific site. > Site-specificity explains magnetic ordering and structural parameters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural And Magnetic Properties Of Mn-Doped SiC

Structural and magnetic properties of manganese (Mn)-doped silicon carbide (SiC) are investigated. Two Mn-doping methods of 'thermal diffusion' and 'ion implantation' are employed using 4H (hexagonal)- and 3C (cubic)-SiC homoepitaxial wafer as the host material. In the case of 4H-SiC doped using the thermal diffusion method, the extended X-ray absorption fine structure (EXAFS) analysis suggests that most Mn atoms are incorporated on the interstitial site in the 4H-SiC lattice, and a paramagnetic behavior is observed in the magnetization measurement. For the Mn-implanted 3C-SiC, on the other hand, we detect ferromagnetic behaviors and a Curie temperature is found to reach to 245 K.

36 MATERIALS SCIENCE↗

Ironsand (Titanomagnetite-Titanohematite): Chemistry, Magnetic Properties and Direct Applications for Wireless Power Transfer

Ironsand is an abundant and inexpensive magnetic mineral resource. However, the magnetic properties of unprocessed ironsand are often inadequate for any practical applications. In this work, the applicability of ironsand for use as a component in a soft magnetic composite for large-scale inductive power transfer applications was investigated. After magnetic separation, the chemical, structural and magnetic properties of ironsand sourced from different locations were compared. Differences observed in the DC magnetic properties were consistent with changes in the chemical compositions obtained from X-ray Absorption Near-Edge Spectroscopy (XANES), which suggests varying the titanohematite to titanomagnetite content. Increased content in titanomagnetite and magnetic permeability correlated well with the total Fe content in the materials. The best-performing ironsand with the highest permeability and lowest core losses was used alongside Mn,Zn-Ferrite particles (ranging from ~100 μm to 2 mm) to fabricate toroid cores with varying magnetic material loading. It was shown that ironsand can be used to replace up to 15 wt.% of the magnetic materials with minimal impact on the composite magnetic performance, thus reducing the cost. Ironsand was also used as a supporting material in a single-rail wireless power transfer system, effectively increasing the power transfer, demonstrating potential applications to reduce flux leakage.

36 MATERIALS SCIENCE↗

Static and dynamic magnetic properties of epitaxial Co{sub 2}FeAl Heusler alloy thin films

Structural and magnetic properties of epitaxial Co{sub 2}FeAl Heusler alloy thin films were investigated. Films were deposited on single crystal MgO (001XS) substrates at room temperature, followed by an annealing process at 600 deg. C. MgO and Cr buffer layers were introduced in order to enhance crystalline quality, and improve magnetic properties. Structural analyses indicate that samples have grown in the B2 ordered epitaxial structure. VSM measures show that the MgO buffered sample displays a magnetization saturation of 1010 {+-} 30 emu/cm{sup 3}, and Cr buffered sample displays a magnetization saturation of 1032 {+-} 40 emu/cm{sup 3}. Damping factor was studied by strip-line ferromagnetic resonance measures. We observed a maximum value for the MgO buffered sample of about 8.5 x 10{sup -3}, and a minimum value of 3.8 x 10{sup -3} for the Cr buffered one.

36 MATERIALS SCIENCE↗

Structural and Magnetic Properties of Ordered/Disordered Sendust Powders Prepared by Mechanical Alloying

In this study, Sendust alloy (Fe{sub 85}Si{sub 9.6}Al{sub 5.4}) was fabricated by mechanical alloying process, and its crystal structure and magnetic properties were investigated. Sendust alloy has excellent soft magnetic properties and is widely used in different applications. Raw materials (Fe, Si, and Al) were milled by a planetary ball mill at different milling times, from 5 to 20 h. The resulted alloys were annealed at 1373 and 1473 K for 2 h, and the effect of annealing temperature was investigated on the magnetic properties. Crystal structure of the samples was investigated by X-ray diffractometery method. The results indicated that saturation magnetization of 10-h milled sample was at maximum, and it decreased both by increasing milling time and by annealing. These variations were discussed based on phase transformation from ordered to disordered phases and/or vice versa. The maximum saturation magnetization obtained, 156 emu/g, was comparable by those reported for Sendust alloy, which was prepared by other methods. Magnetization–temperature curves of the alloys and annealed ones were recorded by a Faraday balance. Two clear drops were observed on each M-T curve of the as-milled samples that displayed the existence of two different magnetic phases. On the other hand, there is just one drop on the M-T curves of the annealed samples, indicating that these samples were in a less disordered phase.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of Preparation Conditions on the Structure and Magnetic Properties of Metal-Doped Magnesium Ferrites Synthesized From Laterite Leaching Solutions

In this paper, metal-doped magnesium ferrites (MgFe{sub 2}O{sub 4}) were synthesized from laterite leaching solutions using a coprecipitation-calcination method. The as-synthesized samples were characterized by x-ray diffraction (XRD), Fourier transform infrared spectrometer (FTIR), and physical property measurement system (PPMS) to determine the structure and magnetic properties. The effects of preparation conditions including precipitant reagents and metal ion concentrations in the laterite leaching solutions on the as-prepared spinel ferrites were investigated systematically. It is indicated that Ni–Co–Mn-doped MgFe{sub 2}O{sub 4} and Mn–Al–Cr-doped MgFe{sub 2}O{sub 4} could be synthesized from laterite leaching solutions by using sodium hydroxide (NaOH) and ammonia solution (NH{sub 3}⋅H{sub 2}O) as precipitant reagent, respectively. By adjusting the metal ion concentrations in the laterite leaching solutions, Ni–Co–Mn-doped MgFe{sub 2}O{sub 4} with different substitution contents were obtained. With the Ni and Mn substitution content increasing, the lattice constant and average grain size decreased, while x-ray density increased correspondingly. Magnetic property tests indicated that all the as-prepared samples exhibited typical ferrimagnetic behavior at room temperature, and the saturation magnetization (Ms) depended on the Ni, Co, and Mn substitution content. Specifically, the Ms and Hc values of the as-prepared metal-doped MgFe{sub 2}O{sub 4} sample with optimum substitution content of 0.185 could reach 33.22 emu g{sup −1} and 53 Oe, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Microstructural evolutions, phase transformations and hard magnetic properties in polycrystalline Ce–Co–Fe–Cu alloys

This work focuses on systematic studies of Ce–Co based 1:5 permanent magnet alloys of CeCo 4.4-x Fe x Cu 0.6 and CeCo 3.9-x Fe x Cu 1.2 (x = 0, 0.3, 0.6, 0.9, 1.2, 1.8) by varying Co:Fe. The overarching aim of this manuscript is to elucidate the hard-magnetic properties through a better understanding of phase formation by the structural, microstructural, and magnetic properties in these materials. Improved mutual solubility of Fe in the 1:5 phase has been observed with an extended homogeneity range by Cu substitution. For both composition series, Fe contents of x ≤ 0.6 show a homogeneous microstructure with a single 1:5 phase and good magnetic properties. The composition region 0.6 < x ≤ 0.9 appears to be near the boundary of solubility and evolution of other phases. At x = 1.8, it is found that the homogeneous 1:5 phase and magnetic hardness deteriorated due to the evolution of secondary phases such as 2:17, 2:7, and Fe–Co. Furthermore, the addition of Fe improved both the magnetization and Curie temperature via increased effective exchange interactions, while an increase in Cu content enhanced coercivity.

33 ADVANCED PROPULSION SYSTEMS↗

Quantum Magnetic Properties in Perovskite with Anderson Localized Artificial Spin‐1/2

Abstract Quantum magnetic properties in a geometrically frustrated lattice of spin‐1/2 magnet, such as quantum spin liquid or solid and the associated spin fractionalization, are considered key in developing a new phase of matter. The feasibility of observing the quantum magnetic properties, usually found in geometrically frustrated lattice of spin‐1/2 magnet, in a perovskite material with controlled disorder is demonstrated. It is found that the controlled chemical disorder, due to the chemical substitution of Ru ions by Co‐ions, in a simple perovskite CaRuO 3 creates a random prototype configuration of artificial spin‐1/2 that forms dimer pairs between the nearest and further away ions. The localization of the Co impurity in the Ru matrix is analyzed using the Anderson localization formulation. The dimers of artificial spin‐1/2, due to the localization of Co impurities, exhibit singlet‐to‐triplet excitation at low temperature without any ordered spin correlation. The localized gapped excitation evolves into a gapless quasi‐continuum as dimer pairs break and create freely fluctuating fractionalized spins at high temperature. Together, these properties hint at a new quantum magnetic state with strong resemblance to the resonance valence bond system.

74 ATOMIC AND MOLECULAR PHYSICS↗

Magnetic properties of the spin-3/2 Blume-Capel model on a hexagonal Ising nanowire

Magnetic properties, such as magnetizations, internal energy, specific heat, entropy, Helmholtz free energy, and phase diagrams of the spin-3/2 Blume-Capel model on a hexagonal Ising nanowire with core-shell structure are studied by using the effective-field theory with correlations. The hysteresis behaviors of the system are also investigated and the effects of Hamiltonian parameters on hysteresis behaviors are discussed in detail. The obtained results are compared with some theoretical results and a qualitatively good agreement is found.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Synthesis, photoluminescence and magnetic properties of barium vanadate nanoflowers

Graphical abstract: The flower-shaped barium vanadate was obtained for the first time. The photoluminescence and magnetic properties of the barium vanadate nanoflowers were investigated at room temperature. Research highlights: {yields} In the paper, the flower-shaped barium vanadate were obtained for the first time. The CHM method used here is new and simple for preparation of barium vanadate. {yields} The photoluminescence and magnetic properties of the barium vanadate nanoflowers were investigated at room temperature. The strong bluish-green emission was observed. {yields} The ferromagnetic behavior of the barium vanadate nanoflowers was found with saturation magnetization of about 83.50 x 10{sup -3} emu/g, coercivity of 18.89 Oe and remnant magnetization of 4.63 x 10{sup -3} emu/g. {yields} The mechanisms of PL and magnetic property of barium vanadate nanoflowers have been discussed. -- Abstract: The flower-shaped barium vanadate has been obtained by the composite hydroxide mediated (CHM) method from V{sub 2}O{sub 5} and BaCl{sub 2} at 200 {sup o}C for 13 h. XRD and XPS spectrum of the as-synthesized sample indicate it is hexagonal Ba{sub 3}V{sub 2}O{sub 8} with small amount of Ba{sub 3}VO{sub 4.8} coexistence. Scan electron microscope and transmission electron microscope display that the flower-shaped crystals are composed of nanosheets with thickness of {approx}20 nm. The UV-visible spectrum shows that the barium vanadate sample has two optical gaps (3.85 eV and 3.12 eV). Photoluminescence spectrum of the barium vanadate flowers exhibits a visible light emission centered at 492 and 525 nm which might be attributed to VO{sub 4} tetrahedron with T{sub d} symmetry in Ba{sub 3}V{sub 2}O{sub 8}. The ferromagnetic behavior of the barium vanadate nanoflowers has been found with saturation magnetization of about 83.50 x 10{sup -3} emu/g, coercivity of 18.89 Oe and remnant magnetization of 4.63 x 10{sup -3} emu/g, which is mainly due to the presence of a non-orthovanadate phase with spin S = 1/2.

36 MATERIALS SCIENCE↗

Electronic structure and magnetic properties of FeWO{sub 4} nanocrystals synthesized by the microwave-hydrothermal method

This communication reports that FeWO{sub 4} nanocrystals were successfully synthesized by the microwave-hydrothermal method at 443 K for 1 h. The structure and shape of these nanocrystals were characterized by X-ray diffraction, Rietveld refinement, and transmission electron microscopy. The experimental results and first principles calculations were combined to explain the electronic structure and magnetic properties. Experimental data were obtained by magnetization measurements for different applied magnetic fields. Theoretical calculations revealed that magnetic properties of FeWO{sub 4} nanocrystals can be assigned to two magnetic orderings with parallel or antiparallel spins in adjacent chains. These factors are crucial to understanding of competition between ferro- and antiferromagnetic behavior. Highlights: Black-Right-Pointing-Pointer Monophasic FeWO{sub 4} nanocrystals were synthesized by the microwave-hydrothermal method. Black-Right-Pointing-Pointer Rietveld refinement and clusters model for monoclinic structure Black-Right-Pointing-Pointer Magnetic properties of FeWO{sub 4} nanocrystals at different temperatures.

36 MATERIALS SCIENCE↗

Structural and magnetic properties of the ordered FePt{sub 3}, FePt and Fe{sub 3}Pt nanoparticles

The Fe{sub x}Pt{sub 100−x} nanoparticles (NPs) with different nominal atomic rations (30≤x≤80) were synthesized at 700 °C by the sol–gel method. The structure, morphology and magnetic properties of the samples were investigated. When the Fe content in the Fe–Pt alloy NPs was 30 at%, FePt{sub 3} NPs were successfully synthesized. With the increase in Fe content up to 50 at%, it was found that the superlattice reflections (0 0 1) and (1 1 0) appeared, which indicated the formation of the L1{sub 0}-FePt phase. Meanwhile, the FePt{sub 3} fraction was reduced. When the Fe content increased to 60 at%, single-phase L1{sub 0}-FePt NPs were synthesized. The coercivity (Hc), saturation magnetization (Ms) and chemical order parameter S for Fe{sub 60}Pt{sub 40} NPs were as high as 10,200 Oe, 17.567 emu/g and 0.928, respectively. With the further increase of the Fe content to 80 at%, only Fe{sub 3}Pt phase existed and the Hc of the Fe{sub 3}Pt NPs decreased drastically to 360 Oe. - Graphical abstract: Fe{sub 3}Pt, FePt and FePt{sub 3} nanoparticles was obtained by sol–gel method. The effect of iron and platinum content on structural and magnetic properties of the FePt nanoparticles was investigated. Display Omitted - Highlights: • L1{sub 2}-FePt{sub 3}, L1{sub 0}-FePt and L1{sub 2}-Fe{sub 3}Pt NPs were synthesized by sol–gel method. • The chemical order parameter S affects the magnetic properties of the Fe–Pt alloy. • Structural and magnetic properties of the Fe–Pt alloy NPs were studied. • The synthetic route in this study will open up the possibilities of practical use.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tuning the Magnetic Properties and Structural Stabilities of the 2-17-3 Magnets Sm 2 Fe 17 X 3 (X=C, N) by Substituting La or Ce for Sm

Designing a permanent magnet with reduced critical rare-earth content is of paramount importance in the development of cost-effective modern technologies. By performing comprehensive first-principles calculations, we investigate the potential avenues for reducing the critical rare-earth content in Sm 2 Fe 17 N 3 and Sm 2 Fe 17 C 3 by making a La or Ce substitution for Sm. The calculated magnetic properties of base compounds are in good agreement with the previous low-temperature (4.2-K) experimental measurements, and they show a large axial anisotropy. Although La or Ce substitution results in a slight reduction of magnetic anisotropy, the magnetic moments of Fe atoms mostly remain unchanged. Specifically, large axial anisotropies of 7.2 and 4.1 MJ/m 3 are obtained for SmCeFe 17 N 3 and SmLaFe 17 N 3 , respectively. These values of anisotropies are comparable to the state-of-the-art permanent magnet Nd 2 Fe 14 B. The foremost limitation of Sm 2 Fe 17 X 3 magnets for practical application is the formation nitrogen or carbon vacancies at high temperatures. By calculating the N- (C)- vacancy formation energy, we show that La or Ce substitution enhances the vacancy formation energy. Here, this enhanced vacancy formation energy will likely improve the thermodynamic stability of these alloys at high temperatures. Therefore, La- or Ce-substituted Sm 2 Fe 17 C 3 and Sm 2 Fe 17 N 3 compounds are promising candidates for high-performance permanent magnets with substantially reduced rare-earth content.

36 MATERIALS SCIENCE↗

Size effects in the magnetic properties of ε-Fe{sub 2}O{sub 3} nanoparticles

We report the results of comparative analysis of magnetic properties of the systems based on ε-Fe{sub 2}O{sub 3}, nanoparticles with different average sizes (from ∼3 to 9 nm) and dispersions. The experimental data for nanoparticles higher than 6–8 nm in size are consistent with the available data, specifically, the transition to the magnetically ordered state occurs at a temperature of ∼500 K and the anomalies of magnetic properties observed in the range of 80–150 K correspond to the magnetic transition. At the same time, Mőssbauer and ferromagnetic resonance spectroscopy data as well as the results of static magnetic measurements show that at room temperature all the investigated samples contain ε-Fe{sub 2}O{sub 3} particles that exhibit the superparamagnetic behavior. It was established that the magnetic properties of nanoparticles significantly change with a decrease in their size to ∼6 nm. According to high-resolution electron microscopy and Mőssbauer spectroscopy data, the particle structure can be attributed to the ε–modification of trivalent iron oxide; meanwhile, the temperature of the magnetic order onset in these particles is increased, the well-known magnetic transition in the range of 80–150 K does not occur, the crystallographic magnetic anisotropy constant is significantly reduced, and the surface magnetic anisotropy plays a decisive role. This is apparently due to redistribution of cations over crystallographic positions with decreasing particle size, which was established using Mössbauer spectra. As the particle size is decreased and the fraction of surface atoms is increased, the contribution of an additional magnetic subsystem formed in a shell of particles smaller than ∼4 nm becomes significant, which manifests itself in the static magnetic measurements as paramagnetic contribution.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

First principles calculation of the structural, electronic, and magnetic properties of Au-Pd atomic chains

The structural, electronic and magnetic properties of free standing Au-Pd bimetallic atomic chain is studied using ab-initio method. It is found that electronic and magnetic properties of chains depend on position of atoms and number of atoms. Spin polarization factor for different atomic configuration of atomic chain is calculated predicting a half metallic behavior. It suggests a total spin polarised transport in these chains.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ab Initio Study of Structural, Electronic, and Magnetic Properties of A{sub 1−x}{sup III}Mn{sub x}B{sup VI}: In{sub 1−x}Mn{sub x}S-Diluted Magnetic Semiconductor

First-principles density functional calculations on the new class of diluted magnetic semiconductor A{sub 1−x}{sup III}Mn{sub x}B{sup VI} In{sub 1−x}Mn{sub x}S for x = 0.25 and 0.5 are investigated to study the structural, electronic, and magnetic properties, employing the full-potential linearized augmented plane wave method. Electronic band structures and density of states revealed a half-metallic character of In{sub 1−x}Mn{sub x}S and show the stability of anti-ferromagnetic states as compared with ferromagnetic states. The calculated exchange constants J{sub dd} are in good agreement with experimental and theoretical results on magnetic properties of single crystalline A{sub 1−x}{sup III}Mn{sub x}B{sup VI} in the anti-ferromagnetic case. Our predicated calculations on the s,p-d exchange constants N{sub 0}α and N{sub 0}β show that they are lower than in A{sub 1−x}{sup II}Mn{sub x}B{sup VI} DMS. The local environment is found tetrahedral as in the II–VI DMS and other (III,Mn) VI compounds. The total magnetic moment for In{sub 1−x}Mn{sub x}S for different concentrations is in accordance with the exact value 5 μ{sub B} and comes mainly from impurity Mn. The local magnetic moments of Mn ions are reduced from their free space charges values due to the p-d hybridization which produces small magnetic moments on the nonmagnetic In and S sites. The Curie temperature of In{sub 1−x}Mn{sub x}S is calculated within the mean field approximation and compared with other DMS systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗