Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Location Of Events”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Reduced-Order Modeling and Wavelet Analysis of Turbofan Engine Structural Response Due to Foreign Object Damage (FOD) Events

The development of a wavelet-based feature extraction technique specifically targeting FOD-event induced vibration signal changes in gas turbine engines is described. The technique performs wavelet analysis of accelerometer signals from specified locations on the engine and is shown to be robust in the presence of significant process and sensor noise. It is envisioned that the technique will be combined with Kalman filter thermal/health parameter estimation for FOD-event detection via information fusion from these (and perhaps other) sources. Due to the lack of high-frequency FOD-event test data in the open literature, a reduced-order turbofan structural model (ROM) was synthesized from a finite element model modal analysis to support the investigation. In addition to providing test data for algorithm development, the ROM is used to determine the optimal sensor location for FOD-event detection. In the presence of significant noise, precise location of the FOD event in time was obtained using the developed wavelet-based feature.

Turso, James↗

The impulsive X-ray burst of October 10, 1970.

An impulsive burst of 100-400 keV solar X-rays associated with a small solar flare was observed on October 10, 1970 with a large area scintillator aboard a balloon. The X-ray burst was also observed simultaneously in 10-80 keV range by the OGO-5 satellite and in 8-20 A range by the SOLRAD-9 satellite. The event is attributed to an H-alpha subflare located approximately at S13, E88 on the solar disk. The spectral characteristics of this event are examined in the light of the earlier X-ray observations of small solar flares.

Kane, S. R.↗

First Flight of the Advanced Thin Ionization Calorimeter (ATIC) Balloon Experiment

The ATILT instrument is designed to measure the composition and energy spectra of Z = 1 to 28 cosmic rays over the energy range -10 GeV - 100 TeV. ATIC was launched as a long duration test balloon flight on 12/28/00 local time from McMurdo, Antarctica. The operations preceding and during launch went very smoothly. During the first -20 hr while the instrument remained within line of sight (LOS), a full system check out was conducted, the experiment was operated in several test configurations, and all major tuning was completed. Preliminary analysis of the science data indicates that the overall detector system is functioning as expected. With our fully functioning analysis software we were able to monitor the data in nearly real time. Each event was reconstructed event-by-event to confirm the detector performance. The shower profiles indicate that the shower maximum location is deeper in the calorimeter for higher energy events, as expected. The energy spectra of protons, Helium nuclei, and "all particles" appear to follow power laws. Both the Si matrix and top scintillator layer of the charge module show clear charge separation for p and He. As the statistics increase, heavy nuclei charge separation will be evaluated. We will present preliminary results of the LOS data, as well as other data that will be available from the flight-data hard disk,

Case, G.↗

Reduced-Order Modeling and Wavelet Analysis of Turbofan Engine Structural Response Due to Foreign Object Damage "FOD" Events

The development of a wavelet-based feature extraction technique specifically targeting FOD-event induced vibration signal changes in gas turbine engines is described. The technique performs wavelet analysis of accelerometer signals from specified locations on the engine and is shown to be robust in the presence of significant process and sensor noise. It is envisioned that the technique will be combined with Kalman filter thermal/ health parameter estimation for FOD-event detection via information fusion from these (and perhaps other) sources. Due to the lack of high-frequency FOD-event test data in the open literature, a reduced-order turbofan structural model (ROM) was synthesized from a finite-element model modal analysis to support the investigation. In addition to providing test data for algorithm development, the ROM is used to determine the optimal sensor location for FOD-event detection. In the presence of significant noise, precise location of the FOD event in time was obtained using the developed wavelet-based feature.

Turso, James A.↗

Automatic generation of efficient orderings of events for scheduling applications

In scheduling a set of tasks, it is often not known with certainty how long a given event will take. We call this duration uncertainty. Duration uncertainty is a primary obstacle to the successful completion of a schedule. If a duration of one task is longer than expected, the remaining tasks are delayed. The delay may result in the abandonment of the schedule itself, a phenomenon known as schedule breakage. One response to schedule breakage is on-line, dynamic rescheduling. A more recent alternative is called proactive rescheduling. This method uses statistical data about the durations of events in order to anticipate the locations in the schedule where breakage is likely prior to the execution of the schedule. It generates alternative schedules at such sensitive points, which can be then applied by the scheduler at execution time, without the delay incurred by dynamic rescheduling. This paper proposes a technique for making proactive error management more effective. The technique is based on applying a similarity-based method of clustering to the problem of identifying similar events in a set of events.

Morris, Robert A.↗

Cometary Nuclei and Tidal Disruption: The Geologic Record of Crater Chains on Callisto and Ganymede

Prominent crater chains on Ganymede and Callisto are most likely the impact scars of comets tidally disrupted by Jupiter and are not secondary crater chains. We have examined the morphology of these chains in detail in order to place constraints on the properties of the comets that formed them and the disruption process. In these chains, intercrater spacing varies by no more than a factor of 2 and the craters within a given chain show almost no deviation from linearity (although the chains themselves are on gently curved small circles). All of these crater chains occur on or very near the Jupiter-facing hemisphere. For a given chain, the estimated masses of the fragments that formed each crater vary by no more than an order of magnitude. The mean fragment masses for all the chains vary by over four orders of magnitude (W. B. McKinnon and P. M. Schenk 1995, Geophys. Res. Lett. 13, 1829-1832), however. The mass of the parent comet for each crater chain is not correlated with the number of fragments produced during disruption but is correlated with the mean mass of the fragments produced in a given disruption event. Also, the larger fragments are located near the center of each chain. All of these characteristics are consistent with those predicted by disruption simulations based on the rubble pile cometary nucleus model (in which nuclei are composed on numerous small fragments weakly bound by self-gravity), and with those observed in Comet D/Shoemaker-Levy 9. Similar crater chains have not been found on the other icy satellites, but the impact record of disrupted comets on Callisto and Ganymede indicates that disruption events occur within the Jupiter system roughly once every 200 to 400 years.

Schenk, Paul M.↗

The location of the particle acceleration region in the 1 September 1971 solar cosmic ray event

A numerical model of interplanetary propagation is used to reconstruct the shape of particle spectra near the sun shortly after release, from the proton and electron fluxes observed at 1 AU after the solar cosmic-ray event of September 1, 1971. A calculation of the spectral changes that would be produced by collisional energy losses is employed to estimate the amount of matter through which the particles passed, the height at which they were accelerated, and, for the proton, the temperature of the plasma. A temperature of about 2.4 million K in the proton acceleration region is obtained, along with a column density of material traversed equal to about 140 micrograms/sq cm for the protons and a column density of less than 4 micrograms/sq cm for the electrons. These results are shown to imply proton acceleration near the base of the corona and electron acceleration at a height greater than about 1 solar radius.

Mcguire, R. E.↗

Three precise gamma-ray burst source locations

The precise source regions of three moderately intense gamma ray bursts are derived. These events were observed with the first interplanetary burst sensor network. The optimum locations of the detectors, widely separated throughout the inner solar system, allowed for high accuracy, over-determined source fields of size 0.7 to 7.0 arc-min(2). All three locations are at fairly high galactic latitude in regions of low source confusion; none can be identified with a steady source object. Archived photographs were searched for optical transients that are able to be associated with these source fields; one such association was made.

Cline, T. L.↗

Three precise gamma-ray burst source locations

The precise source regions of three moderately intense gamma ray bursts are derived. These events were observed with the first interplanetary burst sensor network. The optimum locations of the detectors, widely separated throughout the inner solar system, allowed for high accuracy, over-determined source fields of size 0.7 to 7.0 arc-min(2). All three locations are at fairly high galactic latitude in regions of low source confusion; none can be identified with a steady source object. Archived photographs were searched for optical transients that are able to be associated with these source fields; one such association was made.

Cline, T. L.↗

Characterization of the Catalog Fengyun-1C Fragments and Their Long-term Effect on the LEO Environment

The intentional breakup of Fengyun-1C on 11 January 2007 created the most severe orbital debris cloud in history. More than 2500 large fragments were identified and tracked by the U.S. Space Surveillance Network by the end of the year. The altitude where the event occurred was probably the worst location for a major breakup in the low Earth orbit (LEO) region, since it was already highly populated with operational satellites and debris generated from previous breakups. The addition of so many fragments not only poses a realistic threat to operational satellites in the region, but also increases the instability (i.e., collision cascade effect) of the debris population there. Preliminary analysis of the large Fengyun-1C fragments indicates that their size and area-to-mass ratio (A/M) distributions are very different from those of other known events. About half of the fragments appear to be composed of light-weight materials and more than 100 of them have A/M values exceeding 1 square meter per kilogram, consistent with thermal blanket pieces. In addition, the orbital elements of the fragments suggest nontrivial velocity gain by the fragment cloud during the impact. These important characteristics were incorporated into a numerical simulation to assess the long-term impact of the Fengyun-1C fragments to the LEO debris environment. The main objectives of the simulation were to evaluate (1) the collision probabilities between the Fengyun-1C fragments and the rest of the catalog population and (2) the collision activities and population growth in the region in the next 100 years.

Liou, J.-C.↗

Scattering of terrestrial kilometric radiation at very high altitudes

On a number of occasions during the 3.8 yr. operating lifetime of RAE-2, strong terrestrial kilometric radiation was observed when the spacecraft was over the far side of the moon and when the low altitude terrestrial magnetosphere was completely obscured from view. If these deep lunar occultation events are used to infer radio source locations, then it is found that the apparent source must sometimes be situated at geocentric distances of 10 to 40 sub E or more. From an analysis of these events, it is shown that they are probably due to propagation effects rather than the actual generation of the emission at such large distances. The kilometric radiation can be generated near the earth at auroral latitudes and subsequently strongly scattered in the magnetosheath and nearby solar wind to produce the large apparent distances. The most likely scatterers are density inhomogeneities in the magnetosheath plasma and ion plasma waves in the magnetosheath and the upstream solar wind.

Alexander, J. K.↗

Scattering of terrestrial kilometric radiation at very high altitudes

On a number of occasions during the 3.5-yr operating lifetime of Rae 2, strong terrestrial kilometric radiation has been observed when the spacecraft was over the far side of the moon and when the low-altitude terrestrial magnetosphere was completely obscured from view. If these deep lunar occultation events are used to infer radio source locations, then it is found that the apparent source must sometimes be situated at geocentric distances of 10-40 earth-radii or more. From an analysis of these events, it is shown that they are probably due to propagation effects rather than the actual generation of the emission at such large distances. The kilometric radiation can be generated near the earth at auroral latitudes and subsequently strongly scattered in the magnetosheath and nearby solar wind to produce the large apparent distances. The most likely scatterers are density inhomogeneities in the magnetosheath plasma and ion plasma waves in the magnetosheath and the upstream solar wind.

Alexander, J. K.↗

The Cusp: Open Questions

The northern and southern cusps play an important role in the overall solar wind-magnetosphere- ionosphere interaction. Optical, radar, and ground magnetometer observations of transient events in the dayside auroral oval provide strong evidence for bursty reconnection on the dayside magnetopause occurring along extended reconnection lines during periods of southward and/or ecliptic IMF orientation. During periods of northward IMF orientation, the same ground-based observations provide evidence for reconnection on the magnetopause poleward of the cusps. Cluster observations in the cusp have confirmed the transition in reconnection locations from the dayside to the high-latitude magnetopause as a function of IMF orientation, while in situ observations of the dayside magnetopause indicate that bursty reconnection frequently generates transient events marked by symmetric bipolar magnetic field signatures normal to the nominal magnetopause and magnetic field strength enhancements. In this talk we review recent and invoke new results from analytical, two-dimensional hybrid, and three-dimensional MHD codes to describe the motion and fate of the newly-reconnected magnetic field lines within FTEs, with a view to predicting (I) the locations where events form, (2) the mechanism(s) by which they are generated, (3) their signatures on the dayside and flank magnetopause, (4) their antisunward motion, (5) their interaction with the cusps, and (6) their signatures in the dayside auroral oval, including their occurrence patterns as a function of season. We compare these predictions with observations, in particular the results of a statistical study of Interball-1 FTEs and new multipoint THEMIS observations of FTEs.

Sibeck, D. G.↗

Arctic Tropospheric Ozone: Assessment of Current Knowledge and Model Performance

As the third most important greenhouse gas (GHG) after carbon dioxide (CO2) and methane (CH4), tropospheric ozone (O3) is also an air pollutant causing damage to human health and ecosystems. This study brings together recent research on observations and modeling of tropospheric O3 in the Arctic, a rapidly warming and sensitive environment. At different locations in the Arctic, the observed surface O3 seasonal cycles are quite different. Coastal Arctic locations, for example, have a minimum in the springtime due to O3 depletion events resulting from surface bromine chemistry. In contrast, other Arctic locations have a maximum in the spring. The 12 state-of-the-art models used in this study lack the surface halogen chemistry needed to simulate coastal Arctic surface O3 depletion in the springtime; however, the multi-model median (MMM) has accurate seasonal cycles at non-coastal Arctic locations. There is a large amount of variability among models, which has been previously reported, and we show that there continues to be no convergence among models or improved accuracy in simulating tropospheric O3 and its precursor species. The MMM underestimates Arctic surface O3 by 5 % to 15 % depending on the location. The vertical distribution of tropospheric O3 is studied from recent ozonesonde measurements and the models. The models are highly variable, simulating free-tropospheric O3 within a range of ±50 % depending on the model and the altitude. The MMM performs best, within ±8 % for most locations and seasons. However, nearly all models overestimate O3 near the tropopause (∼300 hPa or ∼8 km), likely due to ongoing issues with underestimating the altitude of the tropopause and excessive downward transport of stratospheric O3 at high latitudes. For example, the MMM is biased high by about 20 % at Eureka. Observed and simulated O3 precursors (CO, NOx, and reservoir PAN) are evaluated throughout the troposphere. Models underestimate wintertime CO everywhere, likely due to a combination of underestimating CO emissions and possibly overestimating OH. Throughout the vertical profile (compared to aircraft measurements), the MMM underestimates both CO and NOx but overestimates PAN. Perhaps as a result of competing deficiencies, the MMM O3 matches the observed O3 reasonably well. Our findings suggest that despite model updates over the last decade, model results are as highly variable as ever and have not increased in accuracy for representing Arctic tropospheric O3.

Arctic↗

Analysis of Data from the Transient Gamma-Ray Spectrometer Experiment on the GGS/Wind Spacecraft

The data analysis from the TGRS experiment is continuing, although the UC Berkeley PI, K. Hurley, is no longer funded for this effort. This experiment has been returning data on the energy spectra and time histories of cosmic gamma-ray bursts since November 1994, and continues to operate in good health. Over a 3 year period ending in November 1997, 41 bursts have been detected simultaneously by TGRS and Dr. Hurley's Ulysses gamma-ray burst experiment. By comparing the times of arrival of a burst at Ulysses and TGRS, we can obtain an annulus of arrival directions for the event. Typical 3sigma annulus widths range from several arcminutes to tens of arcminutes. Because the WIND spacecraft is as far as several light-seconds from Earth, it is sometimes possible to obtain a second annulus using the Burst and Transient Source Experiment (BATSE) aboard the GRO spacecraft. 23 of the 41 bursts were also observed by this experiment. Generally, the two annuli intersect at grazing incidence, leading to a long, narrow error box which reduces somewhat the error circles obtained from BATSE alone. Table 1 summarizes the burst data from TGRS. We plan to defer the publication of these locations until a larger number of events has been accumulated. Measuring the energy spectra of cosmic gamma-ray bursts to search for line emission is one of the prime objectives of this experiment. However, an intense gamma-ray burst is required, or the statistics become too weak to draw meaningful conclusions. One such event has occurred to date, on August 22, 1995, and we have examined it in detail. The spectrum shows no evidence for lines, however.

Hurley, K.↗

Concerning the Perturbations Generated by Flux Transfer Events

The interaction of the solar wind with the Earth's magnetosphere is often highly unsteady. Bursts of magnetic reconnection at multiple locations on the dayside equatorial magnetopause generate flux transfer events or FTEs: twisted ropes of interconnected magnetosheath and magnetospheric magnetic field lines. Once formed, the events move antisunward, displacing and perturbing the ambient media. This talk explores the perturbations predicted by both global numerical simulations and analytical models. Results from global hybrid code simulation confirm the predictions of analytical models indicating that the events generate standing forward slow mode waves as their speeds relative to the magnetosheath flow approach the Alfven velocity. Geometric considerations lead to the conclusion that events generated by component reconnection on the dayside magnetopause move poleward and exhibit strong signatures during intervals of southward IMF orientation, but move towards the flanks and exhibit weak signatures during intervals of northward IMF orientation. Changing event orientations and magnetosheath/magnetospheric magnetic field orientation can enhance the amplitudes of events reaching the flanks. Although the orientations of events on the flanks inferred from multispacecraft timing techniques are consistent with the predictions of the component reconnection model, occurrence patterns versus latitude and IMF orientation require an explanation in terms of both the component and antiparallel reconnection models.

Sibeck, David G.↗

Simulating the Clamped Tapered Beam Specimen Under Quasi-Static and Fatigue Loading Using Floating Node Method

As part of the NASA Advanced Composites Project (ACP), a sub-element has been designed to provide validation data for progressive damage analysis models. The clamped tapered beam is a cross-ply laminated composite specimen designed to validate the simulation of the onset of matrix cracks and their interaction with delaminations, including delamination migration. A tapered geometry was used to localize the first damage occurrence in the tapered region, without prescribing an initial crack. The boundary and loading conditions were chosen to favor delamination growth and subsequent migration after the first damage occurrence. The typical sequence of events consists of a matrix crack located at the tapered region, leading to delamination onset, followed by delamination growth and subsequent delamination migration to a different interface via a dominant matrix crack. The Clamped Tapered Beam (CTB) was tested in both quasi-static and fatigue regimes. The results obtained are used in this study to assess and validate a methodology based on the Floating Node Method (FNM) implemented as an Extended Interface Element. In this methodology, quasi-static and fatigue damage formation and development are modeled by combining FNM to represent crack networks, with Directional Cohesive Zone Elements (DCZE) and Virtual Crack Closure Technique (VCCT), respectively. Qualitatively, the methodology is capable of predicting the sequence of events and overall failure morphology. Quantitatively, the simulation results generally bound the experimental data, based on the range of the characterization data used. In this paper, the results from quasi static and fatigue simulations are compared and correlated with experimental data.

Seshadri, B. R.↗

Implementation and Testing of the First Prompt Search for Electromagnetic Counterparts to Gravitational Wave Transients

A transient astrophysical event observed in both gravitational wave (OW) and electromagnetic (EM) channels would yield rich scientific rewards. A first program initiating EM follow-ups to possible transient OW events has been developed and exercised by the LIGO and Virgo community in association with several partners. In this paper, we describe and evaluate the methods used to promptly identify and localize OW event candidates and to request images of targeted sky locations. Methods. During two observing periods (Dec 172009 to Jan 8 2010 and Sep 2 to Oct 20 2010), a low-latency analysis pipeline was used to identify OW event candidates and to reconstruct maps of possible sky locations. A catalog of nearby galaxies and Milky Way globular clusters was used to select the most promising sky positions to be imaged, and this directional information was delivered to EM observatories with time lags of about thirty minutes. A Monte Carlo simulation has been used to evaluate the low-latency OW pipeline's ability to reconstruct source positions correctly. Results. For signals near the detection threshold, our low-latency algorithms often localized simulated GW burst signals to tens of square degrees, while neutron star/neutron star inspirals and neutron star/black hole inspirals were localized to a few hundred square degrees. Localization precision improves for moderately stronger signals. The correct sky location of signals well above threshold and originating from nearby galaxies may be observed with approx.50% or better probability with a few pointings of wide-field telescopes. Key words. gravitational waves - methods: observational

Camp, Jordan↗