Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Local mixing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS1999

A Three-Dimensional Total Odd Nitrogen (NO(y)) Simulation During SONEX using a Stretched-Grid Chemical Transport Model

The relative importance of various odd nitrogen (NOy) sources including lightning, aircraft, and surface emissions on upper tropospheric total odd nitrogen is illustrated as a first application of the three-dimensional Stretched-Grid University of Maryland/Goddard Chemical-Transport Model (SG-GCTM). The SG-GCTM has been developed to look at the effect of localized sources and/or small scale mixing processes on the large-scale or global chemical balance. For this simulation, the stretched-arid was chosen so that its maximum resolution is located over eastern North America and the North Atlantic; a region that includes most of the SONEX (the SASS (Subsonic Assessment) Ozone and Nitrogen Oxides Experiment) flight paths. The SONEX period (October-November 1997) is simulated by driving the SG-GCTM with assimilated data from the GEOS-STRAT DAS (Goddard Earth Observing System-STRAT Data Assimilation System). A new algorithm is used to parameterize the lightning, flash rates that are needed to calculate emissions of NOy by lightning. Model-calculated upper tropospheric NOy and NOy measurements from the NASA DC-8 aircraft are compared. Spatial variations in NOy were well captured especially with the stretched-grid run; however, model-calculated concentrations were often too high in the upper troposphere, particularly during the first several flights. The lightning algorithm does a reasonably good job; however, the use of emissions from observed lightning, flashes significantly improves the simulation on a few occasions, especially November 3, 1997, indicating that significant uncertainty remains in parameterizing lightning in CTMS. Aircraft emissions play a relatively minor role (about 12%) in the upper tropospheric NOY budget averaged along SONEX flight paths; however, the contribution of such emmissions is as large as about 30% during portions of some flights.

Allen, Dale↗
NASA NTRS2006

Coupled Oscillator Based Agile Beam Transmitters and Receivers: A Review of Work at JPL

This is a review of the work done at Caltech's Jet Propulsion Laboratory during the past decade on development of the coupled oscillator technology in phased array applications to spacecraft telecommunications. First, some historical background is provided to set the work in context. However, this is by no means intended to be a comprehensive review of all work in this area. Rather, the focus is on the JPL contribution with some mention of other work which provided either insight or motivation. In the mid 1990's, R. A. York, and collaborators proposed that an array of mutually injection locked electronic oscillators could provide appropriately phased signals to the radiating elements of an array antenna such that the radiated beam could be steered merely by tuning the end or perimeter oscillators of the array. York, et al. also proposed a receiving system based on such oscillator arrays in which the oscillators provide properly phased local oscillator signals to be mixed with the signals received by the array elements to remove the phase due to angle of arrival of the incident wave. These concepts were viewed as a promising simplification of the beam steering control system that could result in significant cost, mass, and prime power reduction and were therefore attractive for possible space application.

mutual injection locking↗
DOE OSTI2020

Hydrodynamic instabilities and heat transfer characteristics in the duct flow of a fluid in the supercritical thermodynamic regime

The behavior of fluids at supercritical thermodynamic conditions is inherently complex due to large variations in thermodynamic and transport properties. Recent numerical and experimental investigations illustrate ongoing interest for these fluids, especially supercritical CO 2 and supercritical water, for a variety of applications. For example, supercritical water reactors (SCWR) operate in this extreme condition of high-pressure and temperature, resulting in highly dynamic flow fields and unexpected heat transfer regimes. The potential heat transfer benefits in this regime are directly associated with the extreme variations in thermodynamic and transport properties, which occur at, and above, the critical point. This work characterizes the hydrodynamic instabilities that arise for fluids at supercritical thermodynamic conditions when buoyancy forces are significant. Two specific configurations are considered, a natural convection cavity flow, and a mixed convection, heated, horizontal channel flow. Natural convection flow in a cavity is a classical configuration with expected behavior below the critical point. This configuration aids in characterizing the effect of the variable properties in the supercritical thermodynamic regime. Further, limited studies in the existing literature have been conducted for low-Reynolds and intermediate-Rayleigh numbers, mixed-convection channel flows for supercritical water, which is the focus of the channel flow configuration. To investigate the thermally driven hydrodynamic instabilities in this regime, a high-order fully-implicit numerical method is used. Such strong variations in thermophysical properties (in particular, density) are difficult to simulate and an altogether compressible framework is needed. Therefore, the compressible Navier-Stokes equations are solved without any additional assumptions. The fully implicit, high-order in space and time, reconstructed discontinuous Galerkin method as implemented within the multi-physics code called ALE3D (Arbitrary Lagrangian and Eulerian in 2D and 3D), developed at Lawrence Livermore National Laboratory (LLNL), is used. This fully implicit, L-stable method accurately captures the compressible nature of the ow in the limit of very low Mach number. It has been widely accepted that above the critical point, only one phase is observed. However, recent research has indicated the existence of the distinct gas-like and liquid-like regions separated by the Widom line, the locus of the maxima of the specific heat. Along the Widom line, density decreases 6-fold, viscosity drops by a factor of 2, while specific heat spikes by an order of magnitude. These variations, specifically in density and viscosity, produce a thick pseudo-interface and flow dynamics behavior akin to film boiling. A pseudo-film at the heated wall of the cavity and the horizontal channel is observed where buoyancy forces induce mixing through the specific configurations. Further the local Rayleigh and Richardson numbers provide maps of the flow field and the buoyancy forces driving the microscopic mixing. In the first chapter, I describe a background of supercritical fluid and the various applications. The second chapter focuses on the mathematical model and numerical method used for simulations, where a description of the equation of state for supercritical water is described. The third chapter focuses on the natural convection cavity with a heated bottom wall. In this cavity a gas-like and a liquid-like flow within the supercritical thermodynamic regime are observed. The fourth chapter focuses on a forced convection, horizontal channel, distinguishing between the gas-like, liquid-like, and mixed flow regimes. Mixed convection flow, with the addition of gravitational forces in the horizontal channel show the influence of variable properties on the hydrodynamic development, heat transfer, and rising instabilities. The last chapter of this research focuses on characterizing the unstable hydrodynamics through time-averaging processes and analysis of the movement of energy through the developing plumes.

42 ENGINEERING↗
NASA NTRS1981

A viscous-inviscid interaction model of jet entrainment

A viscous-inviscid interaction model for predicting jet entrainment effects on axisymmetric, nozzle afterbodies at subsonic speeds is presented. The model is based on a displacement thickness correction to the inviscid jet boundary that accounts for mixing-induced streamline deflections in the inviscid region. The displacement correction is shown to be related to the local mass entrainment rate and, for thin mixing layers, the model is shown to be analogous to displacement models used in conventional boundary-layer interaction theory. A method is presented for computing the entrainment rate by an overlaid mixing layer model that accounts for the nonsimilar behavior and pressure gradients occurring in the near field region. An iterative scheme for coupling the model to analyses for the external inviscid flow, the external boundary layer, and the inviscid jet exhaust is also given. Results are presented that illustrate the qualitative behavior of the entrainment interaction under various flow conditions and that demonstrate the validity of the model by comparisons with experiment.

Wilmoth, R. G.↗
NASA NTRS1992

On the rate of destruction of lithium in late-type main-sequence stars

It it shown that the rate of destruction of lithium by nuclear reactions in the outer mixed layers of late-type main-sequence stars depends on both the depth of the region where mixing occurs and the stratification within it. The mixed region includes and probably extends beneath the base of the convection zone. As the star evolves on the main sequence, the properties of the convection zone vary in a simple manner. If the mixed layer behaves similarly, then the mean destruction rate can easily be related to the present local value evaluated at the base of the mixed layer. In the case of the sun, it is found that if mixing is rapid compared with the nuclear destruction rate, then the mean destruction rate is approximately equal to one-half the present local value.

Christensen-Dalsgaard, J.↗
NASA NTRS1994

Shortwave feedbacks and El Nino-Southern Oscillation: Forced ocean coupled ocean-atmosphere experiments

Changes in tropical sea surface temperature (SST) can produce changes in cloudiness that modify incoming solar shortwave (SW) radiation, which in turn affects SST. The effects of this negative feedback on Pacific interannual variability are examined in forced ocean model and hybrid coupled ocean-atmosphere model simulations. Two empirical schemes are used to model the large-scale, low-frequency response of surface SW to SST anomalies. The first scheme attempts to account for the nonlocal nature of the atmospheric response to SST based patterns of covariability analyzed through singular value decomposition. In the observations the primary coupled mode of variability is composed of a SW anomaly in the central Pacific that covaries with anomalous SST in the eastern Pacific. This is applied in the model as a nonlocal feedback. The second scheme examines the effects of a purely local feedback with a spatially varying coefficient of magnitude chosen similar to the first scheme. In almost all cases the second scheme behaved similarly to the first, presumably because the correlation scale of SST is large enough for El Nino-Southern Oscillation (ENSO) dynamics that there is little sensitivity to the local approximation in the SW feedback. In simulations forced by time series of observed wind stress the SW feedback induced very minor SST damping. Results for a simpified heat budget analysis showed that while the SW feedback increased the local heat flux damping on SST, it also induced a mean shallowing of the mixed layer. The resulting changes in both the local mean vertical temperature gradient and the zonal velocity response to the wind stress acted to oppose the local heat flux damping effects. When the observed SW anomalies were applied to forced simulations, the simulated SST anomalies were modified as expected, and agreement with observed SST improved. In coupled simulations the SW feedbacks had greater impact than in the case of specified stress. The main effects were to decrease the magnitude of the warm and cold SST anomalies in the central Pacific, while leaving the pattern and evolution of ENSO anomalies essentially unchanged elsewhere. The SW feedbacks thus produce a modest improvement of the model ENSO SST pattern compared with observations, although they tended to shorten the period of the model ENSO cycle. Overall the results suggest that large-scale SW feedbacks are of quantitative importance to simulating some aspects of the ENSO cycle but are not critical to the overall occurrence of the phenomenon.

Waliser, Duane E.↗
DOE OSTI2020

Photoinduced Anion Segregation in Mixed Halide Perovskites

Alloyed lead halide perovskites have taken a dominant role in the quest for third-generation solar cells. This is due to optimal light-harvesting properties, which can be tuned across the visible spectrum by mixing halide (X = Cl – , Br – , and I – ) anions and A + cations (A + = FA + , MA + , and Cs + ). Durability issues related to ion movement within the perovskite lattice, however, impede large-scale commercialization. Uniformly mixed halide perovskites [e.g., APb(I 1– x Br x ) 3 ] reversibly segregate into narrow bandgap I-rich and wide bandgap Br-rich domains during continuous visible illumination. Subsequent I-rich domains reduce local open circuit voltages and decrease mixed halide perovskite solar cell power conversion efficiencies. In this review, we assess the known effects of halide segregation on the structural and optical properties of mixed halide materials, discuss ongoing research to suppress the phenomenon, and finally provide a mechanistic overview of its underlying origins.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Standoff Infrared Measurements of Chemical Plume Dynamics in Complex Terrain Using a Combination of Active Swept-ECQCL Laser Spectroscopy with Passive Hyperspectral Imaging

Chemical plume detection and modeling in complex terrain present numerous challenges. We present experimental results from outdoor releases of two chemical tracers (sulfur hexafluoride and Freon-152a) from different locations in mountainous terrain. Chemical plumes were detected using two standoff instruments collocated at a distance of 1.5 km from the plume releases. A passive long-wave infrared hyperspectral imaging system was used to show time- and space-resolved plume transport in regions near the source. An active infrared swept-wavelength external cavity quantum cascade laser system was used in a standoff configuration to measure quantitative chemical column densities with high time resolution and high sensitivity along a single measurement path. Both instruments provided chemical-specific detection of the plumes and provided complementary information over different temporal and spatial scales. The results show highly variable plume propagation dynamics near the release points, strongly dependent on the local topography and winds. Effects of plume stagnation, plume splitting, and plume mixing were all observed and are explained based on local topographic and wind conditions. Measured plume column densities at distances ~100 m from the release point show temporal fluctuations over ~1 s time scales and spatial variations over ~1 m length scales. The results highlight the need for high-speed and spatially resolved measurement techniques to provide validation data at the relevant spatial and temporal scales required for high-fidelity terrain-aware microscale plume propagation models.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

Influence of mixing on the generation of nanoparticles in cement systems

In this work, we study the effect of mixing intensity on the size and concentration of nanoparticles in quartz and cement systems. We vary the local shear rate in the studied suspensions induced by mixing by either changing solid volume fraction or mixing speed. Our results obtained on quartz, cement and quartz-cement suspensions provide a master curve relating the concentration of nanoparticles in the pore solution as a function of the local shearing conditions computed at a micromechanical level. Our results suggest, in accordance with literature, that high mixing intensity is at the origin of a detachment of nano-hydrates from the surface of cement particles. These nanoparticles can be stabilized and therefore detected in the pore-solution only in the presence of superplasticizers, which inhibit their agglomeration to other particles.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Local Power: Comparing County-Level Renewable Energy Potential to Consumption Using the SLOPE Platform

Wide-scale deployment of renewable energy technologies has the potential to significantly reduce greenhouse gas emissions and mitigate the effects of climate change. Many communities have ambitious clean energy goals with targets for locally generated renewable energy. To inform state and local clean energy planning, analysts from the Joint Institute for Strategic Energy Analysis (JISEA) and National Renewable Energy Laboratory (NREL) used data from NREL's State and Local Planning for Energy (SLOPE) platform to compare annual technical generation potential of renewable energy technologies to modeled electricity consumption in every county of the contiguous United States. Annual costs were calculated to produce a 20% share of electricity consumed annually from each technology to examine localized cost effectiveness of a diversified mix of generation sources. For example, combining distributed and utility-scale wind and solar generation can offset the need for storage and nonintermittent fossil resources to achieve high deployment of renewables. This county-level analysis provides insight into where localized renewable energy generation could cost-effectively match annual electricity consumption.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
NASA NTRS2007

Coupled Groups of g-Modes in a Sun with Mixed Core

Groups of linear g-modes can sum to create long-lived nonlinear oscillations in small "hot volumes" very deep in the Sun that help drive the modes. In these volumes (dimensions -10 Mm), the time average rate of He-3 burning doubles as temperature fluctuations exceed 10% and rises by an order of magnitude for fluctuations of 25%. To be consistent with locally large motions, we impose a mixed shell on an otherwise standard solar model before computing g-mode solutions. Mixing in the assumed shell r = (0.10+/-0.03) R(sub sun) is rapid (<<10(exp 6) yr) with slower mixing somewhat beyond. If l is the principal spherical harmonic index, a set of g-modes for any single l less than or equal to 15 with five consecutive radial harmonics can be excited with nearly linear thermal amplitudes, A(sub T) less than or equal to 0.053, throughout the star and a fractional temperature fluctuation in its hot volume of (Delta)T/T less than or equal to 0.18. These thresholds for excitation will become smaller when sets for several values of l are computed simultaneously. There is some evidence for the rotation of g-mode sets in the long solar activity record and g-mode upward wave flux has been suggested to explain the 1.3 yr reversing flows tentatively detected below the Sun's convective envelope (CE). The large local amplitudes needed for excitation implies that g-modes may transport a non-negligible fraction of the solar luminosity, yet their near linear amplitudes outside the hot volume suggests amplitudes over most of the solar surface that would be barely detectable for l > 3. A formalism is presented for summing the g-modes and estimating growth rates under the approximation that modes are strictly linear except in a hot volume which holds only a few percent of mode kinetic energy. Finally over the range 2 less than or equal to l less than or equal to 30, we summed all zonal harmonics, m, for a given l and computed the relative angular orientations that would release the most nuclear energy. This should be close to the physically preferred angular state of such a family and a few examples were displayed.

Wolff, Charles L.↗
DOE OSTI2025

First observations of edge instabilities in strongly shaped negative triangularity plasmas on DIII-D

Throughout the 2023 DIII-D negative triangularity (NT) campaign, unexpected magnetic fluctuations indicative of an edge localized instability were observed in the majority of strongly shaped (–0.55 ≤ δ ≤ –0.45) discharges. Moreover, these same fluctuations were found to be absent in weaker NT plasma shapes. Based on a database study, three separate mode behaviors are observed based primarily on the edge safety factor and normalized plasma beta β N . The main regime is the bursty state, in which short (~5 ms) magnetic bursts occur every 5–10 ms. Each burst drives a small reduction in the edge electron temperature (T e ) as measured by electron cyclotron emissions (ECE), which then rapidly recovers between the bursts. The quiescent regime appears to have governing mechanics similar to the bursty regime, but with multiple unique mode signatures observed in the magnetics. These additional modes greatly reduce the bursty nature of the plasma. Finally, a saturated state is observed in a number of discharges, particularly at early time slices. The saturated regime is often short-lived (maximum 500 ms), but can have a large impact on the dynamics of the plasma edge region, causing significant drops in electron temperature as observed in the ECE diagnostic. 2D ECE imaging (ECE-I) is utilized, showing large kink-like perturbations localized near the last closed flux surface that extend into the SOL indicative of an external kink/peeling behavior. Additionally, evidence of phase mixing and observed tearing-parity perturbations localized near the edge rational surfaces is observed in the quiescent regime plasmas. As a result, the various modes do not appear to have a large impact on global confinement but may play a role in regulating the transport of the NT edge and the observed edge gradients.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1994

Summertime distribution and relations of reactive odd nitrogen species and NO(y) in the troposphere over Canada

We report here large-scale features of the distribution of NO(x), HNO3, PAN, particle NO3, and NO(y) in the troposphere from 0.15 to 6 km altitude over central Canada. These measurements were conducted in July - August 1990 from the NASA Wallops Electra aircraft as part of the joint United States-Canadian Arctic Boundary Layer Expedition (ABLE) 3B-Northern Wetlands Study. Our findings show that this region is generally NO(x) limited, with NO(x) mixing ratios typically 20-30 parts per trillion by volume (pptv). We found little direct evidence for anthropogenic enhancement of mixing ratios of reactive odd nitrogen species and NO(y) above those in 'background' air. Instead, it appears that enhancements in the mixing ratios of these species were primarily due to emissions from several day old or CO-rich-NO(x)-poor smoldering local biomass-burning fires. NO(x) mixing ratios in biomass-burning impacted air masses were usually less than 50 pptv, but those of HNO3 and PAN were typically 100-300 pptv representing a twofold-threefold enhancement over 'background' air. During our study period, inputs of what appeared to be aged tropical air were a major factor influencing the distribution of reactive odd nitrogen in the midtroposphere over northeastern North America. These air masses were quite depleted in NO(y) (generally less than 150 pptv), and a frequent summertime occurrence of such air masses over this region would imply a significant influence on the reactive odd nitrogen budget. Our findings show that the chemical composition of aged air masses over subarctic Canada and those documented in the Arctic during ABLE 3A have strikingly similar chemistries, suggesting large-scale connection between the air masses influencing these regions.

Talbot, R. W.↗
NASA NTRS2002

Aspects of Supercritical Turbulence: Direct Numerical Simulation of O2/H2 and C7H16/N2 Temporal Mixing Layers

Results from Direct Numerical Simulations of temporal, supercritical mixing layers for two species systems are analyzed to elucidate species-specific turbulence aspects. The two species systems, O2/H2 and C7HG16/N2, have different thermodynamic characteristics; thus, although the simulations are performed at similar reduced pressure (ratio of the pressure to the critical pressure), the former system is dose to mixture ideality and has a relatively high solubility with respect to the latter, which exhibits strong departures from mixture ideality Due to the specified, smaller initial density stratification, the C7H16/N2 layers display higher growth and increased global molecular mixing as well as larger turbulence levels. However, smaller density gradients at the transitional state for the O2/H2 system indicate that on a local basis, the layer exhibits an enhanced mixing, this being attributed to the increased solubility and to mixture ideality. These thermodynamic features are shown to affect the irreversible entropy production (i.e. the dissipation), which is larger for the O2/H2 layer and is primarily concentrated in high density-gradient magnitude regions that are distortions of the initial density stratification boundary. In contrast, the regions of largest dissipation in the C7H16/N2 layer are located in high density-gradient magnitude regions resulting from the mixing of the two fluids.

Bellan, J.↗
NASA NTRS1986

Composite interlaminar fracture toughness: Three-dimensional finite element modeling for mixed mode 1, 2 and 3 fracture

A computational method/procedure is described which can be used to simulate individual and mixed mode interlaminar fracture progression in fiber composite laminates. Different combinations of Modes 1, 2, and 3 fracture are simulated by varying the crack location through the specimen thickness and by selecting appropriate unsymmetric laminate configurations. The contribution of each fracture mode to strain energy release rate is determined by the local crack closure methods while the mixed mode is determined by global variables. The strain energy release rates are plotted versus extending crack length, where slow crack growth, stable crack growth, and rapid crack growth regions are easily identified. Graphical results are presented to illustrate the effectiveness and versatility of the computational simulation for: (1) evaluating mixed-mode interlaminar fracture, (2) for identifying respective dominant parameters, and (3) for selecting possible simple test methods.

Murthy, P. L. N.↗
NASA NTRS1988

Composite interlaminar fracture toughness - Three-dimensional finite-element modeling for mixed mode I, II, and fracture

A computational method/procedure is described which can be used to simulate individual and mixed mode interlaminar fracture progression in fiber composite laminates. Different combinations of Modes 1, 2, and 3 fracture are simulated by varying the crack location through the specimen thickness and by selecting appropriate unsymmetric laminate configurations. The contribution of each fracture mode to strain energy release rate is determined by the local crack closure methods while the mixed mode is determined by global variables. The strain energy release rates are plotted versus extending crack length, where slow crack growth, stable crack growth, and rapid crack growth regions are easily identified. Graphical results are presented to illustrate the effectiveness and versatility of the computational simulation for: (1) evaluating mixed-mode interlaminar fracture, (2) for identifying respective dominant parameters, and (3) for selecting possible simple test methods.

Murthy, Pappu L. N.↗
DOE OSTI2022

Relative importance of high-latitude local and long-range-transported dust for Arctic ice-nucleating particles and impacts on Arctic mixed-phase clouds

Dust particles, serving as ice-nucleating particles (INPs), may impact the Arctic surface energy budget and regional climate by modulating the mixed-phase cloud properties and lifetime. In addition to long-range transport from low-latitude deserts, dust particles in the Arctic can originate from local sources. However, the importance of high-latitude dust (HLD) as a source of Arctic INPs (compared to low-latitude dust, LLD) and its effects on Arctic mixed-phase clouds are overlooked. In this study, we evaluate the contribution to Arctic dust loading and INP population from HLD and six LLD source regions by implementing a source-tagging technique for dust aerosols in version 1 of the US Department of Energy's Energy Exascale Earth System Model (E3SMv1). Our results show that HLD is responsible for 30.7 % of the total dust burden in the Arctic, whereas LLD from Asia and North Africa contributes 44.2 % and 24.2 %, respectively. Due to its limited vertical transport as a result of stable boundary layers, HLD contributes more in the lower troposphere, especially in boreal summer and autumn when the HLD emissions are stronger. LLD from North Africa and East Asia dominates the dust loading in the upper troposphere with peak contributions in boreal spring and winter. The modeled INP concentrations show better agreement with both ground and aircraft INP measurements in the Arctic when including HLD INPs. The HLD INPs are found to induce a net cooling effect (-0.24 W m -2 above 60 °N) on the Arctic surface downwelling radiative flux by changing the cloud phase of the Arctic mixed-phase clouds. The magnitude of this cooling is larger than that induced by North African and East Asian dust (0.08 and -0.06 W m -2 , respectively), mainly due to different seasonalities of HLD and LLD. Uncertainties of this study are discussed, which highlights the importance of further constraining the HLD emissions.

54 ENVIRONMENTAL SCIENCES↗