Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LaN”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Improving Excited-State Potential Energy Surfaces via Optimal Orbital Shapes

In this work, we demonstrate that, rather than resorting to high-cost dynamic correlation methods, qualitative failures in excited-state potential energy surface predictions can often be remedied at no additional cost by ensuring that optimal molecular orbitals are used for each individual excited state. This approach also avoids the weighting choices required by state-averaging and dynamic weighting and obviates their need for expensive wave function response calculations when relaxing excited-state geometries. Although multistate approaches are of course preferred near conical intersections, other features of excited-state potential energy surfaces can benefit significantly from our single-state approach. In three different systems, including a double bond dissociation, a biologically relevant amino hydrogen dissociation, and an amino-to-ring intramolecular charge transfer, we show that state-specific orbitals offer qualitative improvements over the state-averaged status quo.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Photoelectron Spectroscopic and ab Initio Computational Studies of the Anion, HThO –

The synergetic combination of anion photoelectron spectroscopy and high-level relativistic coupled-cluster calculations was employed to study the anion, HThO-. The atomic connectivity of this anion was found to be HThO- and not ThOH-. Vibrational and electronic energy spacings in the HThO- photoelectron spectrum were measured and calculated, with good agreement between them being found. Computations yielded electronic energies and equilibrium structures as well as enabling orbital analyses. The adiabatic electron affinity of HThO was determined to be 1.297 ± 0.035 eV.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Influence of substituents on the vectorial difference static dipole upon excitation in synthetic bacteriochlorins

Organic dye aggregates have been shown to exhibit exciton delocalization in natural and synthetic systems. Such dye aggregates show promise in the emerging area of quantum information science (QIS). We believe that the difference static dipole (Δd) is an essential dye parameter in the development of molecular QIS systems. However, a foundational understanding of the structural factors influencing Δd remains elusive. Bacteriochlorins play a vital role in photosynthesis due to their exceptional photophysical properties. Therefore, bacteriochlorins are particularly suitable dyes for the construction of aggregate systems for QIS. Synthetic bacteriochlorins further offer stability and tunability via chemical modifications. Here, the influence of substituents on the Δd of monomeric (non-aggregated) dyes was investigated via density functional theory (DFT) and time-dependent (TD-)DFT in a set of 5-methoxybacteriochlorins progressively substituted with ethynyl, phenyl, and phenylethynyl substituents at the 3,13- and 3,13,15-positions of the macrocycle. Symmetrically substituted 5-methoxybacteriochlorins were shown to have the largest Δd. The increase in Δd in the series of dyes was largely due to changes in orientation of the static dipole upon excitation rather than large changes in magnitude. In addition, the transition dipole (μ) and the angle between Δd and μ (ζ) were calculated. Three 5-methoxybacteriochlorins with high predicted Δd and μ were synthesized and characterized spectroscopically. The trend in Δd values empirically determined using the solvatochromic Stokes shift method was comparable with the DFT calculations.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Elucidating Anomalous Intensity Ratios in Chlorine L-Edge X-ray Absorption Spectroscopy: Multiplet Effects and Core Rydberg Transitions

A relativistic core–valence-separated equation-of-motion coupled cluster (CVS-EOM-CC) study of chlorine L 2,3 -edge X-ray absorption near-edge structure (XANES) spectra using CH 3 Cl and CH 2 ICl as representative molecules is reported. The nearly identical intensity for the main features in the L 2 - and L 3 -edge XANES spectra is attributed to multiplet effects and the overlap between core–valence and core Rydberg transitions. The multiplet effects originating from the interaction between the core hole and the C–Cl σ* orbitals account for around half of the deviation of the L 3 and L 2 intensity ratio from the 2:1 ratio of the numbers of 2p 3/2 and 2p 1/2 electrons. The 2p 3/2 → 4s core Rydberg transitions are shown to overlap with the 2p 1/2 → σ* transitions and contribute to the other half of the intensity anomaly. Here, we demonstrate that triple excitations in CVS-EOM-CC calculations play important roles in accurate simulation of the overlap between the 2p 1/2 → σ* and 2p 3/2 → 4s transitions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Activation of H 2 O by ThO 2 – Experimental and Computational Studies

Here, a synergetic study that utilized anion photoelectron spectroscopy and high-level abinitio calculations has explored the activation of H 2 O molecules by ThO 2 – molecular anions. Both experiment and theory found conclusive evidence for said activation. In the experiments, this appeared as a tell-tale directional shift in the spectral profile of the anionic complex that ruled out physisorption,i.e., ThO 2 – (H 2 O), and implied chemisorption. In the computations, good agreement was found between the calculated and measured vertical detachment energies, and the atomic connectivity (the structure) of the resulting anionic complex was found to be [OTh(OH) 2 ] – .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Roadmap for Molecular Benchmarks in Nonadiabatic Dynamics

Simulating the coupled electronic and nuclear response of a molecule to light excitation requires the application of nonadiabatic molecular dynamics. However, when faced with a specific photophysical or photochemical problem, selecting the most suitable theoretical approach from the wide array of available techniques is not a trivial task. The challenge is further complicated by the lack of systematic method comparisons and rigorous testing on realistic molecular systems. This absence of comprehensive molecular benchmarks remains a major obstacle to advances within the field of nonadiabatic molecular dynamics. A CECAM workshop, Standardizing Nonadiabatic Dynamics: Towards Common Benchmarks, was held in May 2024 to address this issue. This Perspective highlights the key challenges identified during the workshop in defining molecular benchmarks for nonadiabatic dynamics. Specifically, this work outlines some preliminary observations on essential components needed for simulations and proposes a roadmap aiming to establish, as an ultimate goal, a community-driven, standardized molecular benchmark set.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Nature of Oxygen Adsorption on Defective Carbonaceous Materials

Here, plane-wave density functional theory has been used to study oxygen adsorption on graphene, graphite, and (12,0) zigzag single-walled carbon nanotubes with and without Stone–Wales (SW) and single-vacancy (SV) defects to understand the role of defects on carbonaceous material reactivity. Atomic oxygen adsorption leads to the formation of an epoxide on defect-free graphene and graphite and an ether on the exterior wall of carbon nanotubes and SW-defected materials. O 2 chemisorption is endothermic on defect-free graphene and graphite and slightly exothermic on defect-free nanotubes. O 2 chemisorption energies are predicted to be –1.1 to –1.4 eV on an SW defect and –6.0 to –8.0 eV on an SV defect. An SW defect lowers the energy barriers by 0.90 and 0.50 eV for O 2 chemisorption on graphene and nanotubes, respectively. The formation of a C–O–O–C group is important for O 2 dissociation on defect-free and SW-defected materials. The energy barrier is less than 0.30 eV on an SV defect. The more reactive SW defect toward O adsorption on graphene is mostly due to the strained defective carbon atoms being able to donate more electrons to an O to form an ether. The larger 2s character in the hybrid orbitals in an ether than in an epoxide makes the ether C–O bond stronger. Stronger C–O binding on an SW-defective carbon nanotube than on a defect-free nanotube is in part due to more flexibility of the defect to release the epoxide ring strain to form an ether.

25 ENERGY STORAGE↗
DOE OSTI2023

Exploring Ligand-to-Metal Charge-Transfer States in the Photo-Ferrioxalate System Using Excited-State Specific Optimization

The photo-ferrioxalate system (PFS), [Fe(III)(C 2 O 4 )] 3– , more than an exact chemical actinometer, has been extensively applied in wastewater and environment treatment. Despite many experimental efforts to improve clarity, important aspects of the mechanism of ferrioxalate photolysis are still under debate. In this paper, we employ the recently developed WΓ-CASSCF to investigate the ligand-to-metal charge-transfer states that are key to ferrioxalate photolysis. This investigation provides a qualitative picture of these states and key potential energy surface features related to the photolysis. Furthermore, our theoretical results are consistent with the prompt charge-transfer picture seen in recent experiments and clarify some features that are not visible in experiments. Two ligand-to-metal charge-transfer states contribute to the photolysis of ferrioxalate, and the avoided crossing barrier between them is low compared with the initial photoexcitation energy. Our data also clarify that one Fe–O bond cleaves first, followed by the C–C bond and the other Fe–O bond.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Precise Linker Length and Dynamic Bond Exchange Control Penetrant Diffusion in Dense Vitrimers

Polymer networks with dynamic covalent bonds have been investigated for their self-healing ability, recyclability, and potential as more sustainable materials. Recent results have indicated that in some cases, bond exchange can enhance the transport of penetrants in dense networks, pointing to their potential for separations of membranes. Here, imine dynamic bonds in ethylene oxide (EO) networks with precise linker lengths were synthesized to investigate the transport of N,N′-bis(2,5-di-tert-butylphenyl)-3,4,9,10-perylenedicarboximide (BTBP), a large, anisotropic dye molecule. Networks with mesh sizes smaller than, comparable to, and greater than the size of the penetrant axes were investigated to probe the effects of bond exchange and network confinement on transport. Mesh sizes, which ranged from 0.5 to 1.62 nm, were determined from shear rheology, glass transitions by calorimetry, and probe diffusion coefficients by fluorescence recovery after photobleaching. Permanent networks with identical EO chain lengths were prepared as control samples, and up to a 3 orders of magnitude increase in diffusion coefficient is observed in the dynamic systems for short linkers containing 13 backbone atoms. The longest linkers with 71 backbone atoms show no difference between the permanent and dynamic networks. Linkers shorter than 11 backbone atoms, corresponding to a mesh size smaller than the penetrant small axis, diffusion is no longer observable on the experimental time scale, indicating a sharp cutoff attributed to the precise linkers and narrow mesh size distribution. The dynamic imine exchange time scales were compared to the diffusive hopping times of penetrants and indicate that exchange can occur during a diffusive displacement. Furthermore, these findings provide insights into the factors affecting penetrant transport in dense polymers and inspire the development of next-generation selective polymer membranes.

Diffusion↗
DOE OSTI2026

Spin-Valley Locking in 2 H -TaS 2 and Its Co-Intercalated Counterpart: Roles of Surface Domains and Co Intercalation

Tuning and probing spin-valley coupling is key to understanding correlated ground states in 2H-TaS 2 . Its magnetically intercalated analogue, Co 1/3 TaS 2 , introduces additional degrees of freedom, including modified interlayer coupling and magnetism, to modulate spin-valley physics. Surface-sensitive probes like ARPES are essential for accessing surface spin texture, yet previous studies on 2H-TMDs have reported conflicting results regarding spin-polarized bands, leaving open whether these discrepancies are intrinsic or extrinsic. Here, in this study, we performed spatially resolved spin-ARPES measurements on 2H-TaS 2 and Co 1/3 TaS 2 . Our results reveal robust spin-valley locking on both compounds. Importantly, Co intercalation enhances interlayer hybridization and introduces magnetism while preserving the TaS 2 -derived spin texture. We further observe a spatial reversal of the out-of-plane spin polarization, which we attribute to different surface domains. This effect complicates quantifying spin textures and may underlie prior inconsistent observations. Our findings provide microscopic insight into how interlayer interactions and surface domains together govern spin-valley phenomena in layered TMDs.

Spin-resolved angle-resolved photoemission spectro↗