Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LOOPS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

3D-Stereoscopic Analysis of Solar Active Region Loops: SoHo/EIT Observations at Temperatures of 1.5-2.5 MK - 2

In this paper we study the three-dimensional (3D) structure of hot (T(sub e) approximately equals 1.5 - 2.5 MK) loops in solar active region NOAA 7986, observed on 1996 August 30 with the Extreme-ultraviolet Imaging Telescope (EIT) onboard the Solar and Heliospheric Observatory (SoHO). This complements a first study on cooler (T(sub e) approximately equals 1.0 - 1.5 MK) loops of the same active region, using the same method of Dynamic Stereoscopy to reconstruct the 3D geometry. We reconstruct the 3D-coordinates x(s), y(s), z(s), the density n(sub e)(s), and temperature profile T(sub e)(s) of 35 individual loop segments (as function of the loop coordinate s) using EIT 195 A and 284 A images. The major findings are: (1) All loops are found to be in hydrostatic equilibrium, in the entire temperature regime of T(sub e) = 1.0 - 2.5 MK; (2) The analyzed loops have a height of 2-3 scale heights, and thus only segments extending over about one vertical scale height have sufficient emission measure contrast for detection; (3) The temperature gradient over the lowest scale height is of order dT/ds is approximately 1 - 4 K/km; (4) The radiative loss rate is found to exceed the conductive loss rate by about two orders or magnitude, making thermal conduction negligible to explain the temperature structure of the loops; (5) A steady-state can only be achieved when the heating rate E(sub H) matches the radiative loss rate in hydrostatic equilibrium, requiring a heat deposition length lambda(sub H) of the half density scale height lambda, predicting a scaling law with the loop base pressure, EH varies as p(sub 0 exp 2). This favors coronal heating mechanisms that operate near the loop footpoints; (6) We find a reciprocal correlation between the loop pressure p(sub 0) and loop length L, i.e. p(sub 0) varies as 1/L, implying a scaling law of the steady-state requirement with loop length, i.e. E(sub H ) varies as 1/L(exp 2). The heating rate shows no correlation with the loop-aligned magnetic field component B(sub z) at the footpoints, but is correlated with the azimuthal field B(sub phi) = Bz(RDelta Phi/L) of a twisted loop, and is thus consistent with heating mechanisms based on field-aligned currents.

Aschwanden, Markus J.↗

Livermore Compiler Analysis Loop Suite

LCALS is designed to evaluate compiler optimizations and performance of a variety of loop kernels and loop traversal software constructs. Some of the loop kernels are pulled directly from "Livermore Loops Coded in C", developed at LLNL (see item 11 below for details of earlier code versions). The older suites were used to evaluate floating-point performances of hardware platforms prior to porting larger application codes. The LCALS suite is geared toward assissing C++ compiler optimizations and platform performance related to SIMD vectorization, OpenMP threading, and advanced C++ language features. LCALS contains 20 of 24 loop kernels from the older Livermore Loop suites, plus various others representative of loops found in current production appkication codes at LLNL. The latter loops emphasize more diverse loop constructs and data access patterns than the others, such as multi-dimensional difference stencils. The loops are included in a configurable framework, which allows control of compilation, loop sampling for execution timing, which loops are run and their lengths. It generates timing statistics for analysis and comparing variants of individual loops. Also, it is easy to add loops to the suite as desired.

Hornung, R. D.↗

Robust multi‐loop control of a floating wind turbine

Abstract A principal challenge facing the control of floating offshore wind turbines (FOWTs) is the problem of instability, or “negative damping,” when using blade pitch feedback to control generator speed. This closed‐loop instability can be attributed to non‐minimum phase zeros in the transfer function from blade pitch to generator speed. Standard approaches to improving stability and performance include robust tuning of control gains and introducing multiple feedback loops to respond to platform motion. Combining these approaches is nontrivial because multiple control loops complicate the impact of coupling in the system dynamics. The single‐loop approach to analyzing stability robustness neglects inter‐loop coupling, while a simplistic multi‐loop approach is highly sensitive to dimensional scaling and overestimates the robustness of the single‐loop controller. This work proposes a sensitivity representation that separates some of the natural FOWT dynamic coupling into a parallel feedback loop in the sensitivity function loop to address both of these concerns. The modified robustness measure is used with a simplified linear FOWT model to optimize scheduled multi‐loop control parameters in an automated tuning procedure. This controller is implemented for the 10‐MW Ultraflexible Smart FLoating Offshore Wind Turbine (USFLOWT) and compared against conventional single‐ and multi‐loop controllers tuned using frequency‐domain analysis and high‐fidelity OpenFAST simulations. The multi‐loop robust controller shows the highest overall performance in generator speed regulation and tower load reduction, though consideration of power quality, actuator usage, and other structural loading leads to additional trade‐offs.

Stockhouse, David↗

Conformation and dynamics of nucleotides in bulges and symmetric internal loops in duplex DNA studied by EPR and fluorescence spectroscopies

Highlights: Black-Right-Pointing-Pointer Bulges and loops were studied by both EPR and fluorescence spectroscopies using the probe C/C{sup f}. Black-Right-Pointing-Pointer One-base bulge was in a temperature-dependent equilibrium between looped-out and stacked states. Black-Right-Pointing-Pointer Bases in two- and three-base bulges were stacked at all temperatures, resulting in DNA bending. Black-Right-Pointing-Pointer Bases were stacked in symmetrical two- to five-base internal loops, according to EPR data. Black-Right-Pointing-Pointer Unexpectedly high fluorescence for the smaller loops indicated local structural perturbations. -- Abstract: The dynamics and conformation of base bulges and internal loops in duplex DNA were studied using the bifunctional spectroscopic probe C, which becomes fluorescent (C{sup f}) upon reduction of the nitroxide functional group, along with EPR and fluorescence spectroscopies. A one-base bulge was in a conformational equilibrium between looped-out and stacked states, the former favored at higher temperature and the latter at lower temperature. Stacking of bulge bases was favored in two- and three-base bulges, independent of temperature, resulting in DNA bending as evidenced by increased fluorescence of C{sup f}. EPR spectra of C-labeled three-, four- and five-base symmetrical interior DNA bulges at 20 Degree-Sign C showed low mobility, indicating that the spin-label was stacked within the loop. The spin-label mobility at 37 Degree-Sign C increased as the loops became larger. A considerable variation in fluorescence between different loops was observed, as well as a temperature-dependence within constructs. Fluorescence unexpectedly increased as the size of the loop decreased at 2 Degree-Sign C. Fluorescence of the smallest loops, where a single T{center_dot}T mismatch was located between the stem region and the probe, was even larger than for the single strand, indicating a considerable local structural deformation of these loops from regular B-DNA. These results show the value of combining EPR and fluorescence spectroscopy to study non-helical regions of nucleic acids.

60 APPLIED LIFE SCIENCES↗

A triangular loop of domain D1 of FlgE is essential for hook assembly but not for the mechanical function

Highlights: • The hook protein FlgE assembles into a curved tubular structure with the help of the FlgD cap. • The flagellar hook acts as a universal joint to smoothly transmit torque produced by the flagellar motor to the filament. • FlgE consists of four domains, D0, Dc, D1 and D2. • Genetic analysis suggests that a loop of domain D1 (D1-loop) is responsible for the interaction with FlgD. • A deletion of the D1-loop or domain D2 makes the hook straight but does not affect the bending flexibility of the hook. The bacterial flagellar hook is a short, curved tubular structure made of FlgE. The hook connects the basal body as a rotary motor and the filament as a helical propeller and functions as a universal joint to smoothly transmit torque produced by the motor to the filament. Salmonella FlgE consists of D0, Dc, D1 and D2 domains. Axial interactions between a triangular loop of domain D1 (D1-loop) and domain D2 are postulated to be responsible for hook supercoiling. In contrast, Bacillus FlgE lacks the D1-loop and domain D2. Here, to clarify the roles of the D1-loop and domain D2 in the mechanical function, we carried out deletion analysis of Salmonella FlgE. A deletion of the D1-loop conferred a loss-of-function phenotype whereas that of domain D2 did not. The D1-loop deletion inhibited hook polymerization. Suppressor mutations of the D1-loop deletion was located within FlgD, which acts as the hook cap to promote hook assembly. This suggests a possible interaction between the D1-loop of FlgE and FlgD. Suppressor mutant cells produced straight hooks, but retained the ability to form a flagellar bundle behind a cell body, suggesting that the loop deletion does not affect the bending flexibility of the Salmonella hook.

60 APPLIED LIFE SCIENCES↗

Helium causing disappearance of a/2<111> dislocation loops in binary Fe-Cr ferritic alloys

In this work, single and dual-beam self-ion irradiations were performed at 500°C on ultra-high purity Fe14%Cr alloy to ~0.33 displacements-per-atom (dpa), and 0 or 3030 atomic-parts-per-million (appm) helium/dpa, respectively. Using transmission electron microscopy, we reveal that helium can drastically modify the dislocation loop Burgers vector in Fe-Cr alloys. Helium co-implantation caused complete disappearance of a/2<111> type dislocation loops, and the microstructure consisted of only a<100> loops. Conversely, a/2<111> type loops were predominant without He co-implantation. The total loop density remained largely unaffected. The results strikingly contrast literature asserting that helium stabilizes a/2<111> type loops in bcc Fe alloys, based on low temperature irradiations. Collectively analyzing the results with literature suggest that the small positive interaction between helium and self-interstitial atoms (SIA) in Fe predicted by atomistic simulations maybe insufficient to holistically explain the dislocation loop microstructure development in presence of helium. Helium-SIA positive binding inadvertently implies elevated a/2<111> loop fraction and higher loop densities that the present results contradict. Helium induced high cavity density causing a preferential loss of highly glissile <111> clusters, leaving the matrix saturated with <100> type clusters is proposed as a potential mechanism. Further, the in-situ irradiations combined with Burgers vector analysis strengthened the evidence of Cr-induced dislocation loop mobility reduction that appears to stabilize the a/2<111> type loops and causes higher loop densities in Fe-Cr alloys.

36 MATERIALS SCIENCE↗

THE ROLE OF ACTIVE REGION TOPOLOGY IN EXCITATION, TRAPPING, AND DAMPING OF CORONAL LOOP OSCILLATIONS

We investigate the role of magnetic field topology in dense coronal loop oscillation by the means of three-dimensional magnetohydrodynamic numerical simulations of two models of idealized active regions (ARs). The first AR model is initialized as a straight cylinder surrounded by the field lines of the same length and orientation. The second model consists of a potential dipole magnetic configuration and contains a loop with a higher density than its surroundings. Dipole field lines have position-dependent length and orientation in contrary to straight ones. We study different ways of excitation of transverse loop oscillations by an external pulse and a nearly eigenmode excitation implemented inside the loop. We find that perturbation acting directly on a single loop excites oscillations both in cylindrical and dipole loops. However, the leakage of the wave energy is larger in a curved loop compared to a straight loop. External excitation of the whole AR is efficient in the excitation of oscillation in the straight field configuration, but results in less efficient excitation in the case of dipole field. We show that excitation of collective motion of straight field lines having the same wave periods and planes of the oscillations requires much less energy than excitation of dipole field lines having position-dependent orientation and wave periods and being excited individually, not having a collective mode of oscillation. We conclude that coherent motion of straight field lines is one of the factors that decrease the energy leakage from an oscillating loop, while individual motions of dipole field lines require more energy from the source to produce the loop oscillations, and also lead to higher damping rate compared to the straight field case. We discuss Transition Region and Coronal Explorer (TRACE) observations of coronal loop oscillations in view of our theoretical findings. We show several examples of time signatures of transversal loop oscillations observed by TRACE that agree with numerical simulations of externally excited oscillations.

79 ASTRONOMY AND ASTROPHYSICS↗

DETERMINING THE STRUCTURE OF SOLAR CORONAL LOOPS USING THEIR EVOLUTION

Despite significant progress in understanding the dynamics of the corona, there remain several unanswered questions about the basic physical properties of coronal loops. Recent observations from different instruments have yielded contradictory results about some characteristics of coronal loops, specifically as to whether the observed loops are spatially resolved. In this paper, we examine the evolution of coronal loops through two extreme-ultraviolet filters and determine if they evolve as a single cooling strand. We measure the temporal evolution of eight active region loops previously studied and found to be isothermal and resolved by Aschwanden and Nightingale. All eight loops appear in 'hotter' TRACE filter images (Fe XII 195 A) before appearing in the 'cooler' (Fe IX/Fe X 171 A) TRACE filter images. We use the measured delay between the two filters to calculate a cooling time and then determine if that cooling time is consistent with the observed lifetime of the loop. We do this twice: once when the loop appears (rise phase) and once when it disappears (decay phase). We find that only one loop appears consistent with a single cooling strand and hence could be considered to be resolved by TRACE. For the remaining seven loops, their observed lifetimes are longer than expected for a single cooling strand. We suggest that these loops could be formed of multiple cooling strands, each at a different temperature. These findings indicate that the majority of loops observed by TRACE are unresolved.

79 ASTRONOMY AND ASTROPHYSICS↗

Heating and dynamics of two flare loop systems observed by AIA and EIS

We investigate heating and evolution of flare loops in a C4.7 two-ribbon flare on 2011 February 13. From Solar Dynamics Observatory/Atmospheric Imaging Assembly (AIA) imaging observations, we can identify two sets of loops. Hinode/EUV Imaging Spectrometer (EIS) spectroscopic observations reveal blueshifts at the feet of both sets of loops. The evolution and dynamics of the two sets are quite different. The first set of loops exhibits blueshifts for about 25 minutes followed by redshifts, while the second set shows stronger blueshifts, which are maintained for about one hour. The UV 1600 observation by AIA also shows that the feet of the second set of loops brighten twice. These suggest that continuous heating may be present in the second set of loops. We use spatially resolved UV light curves to infer heating rates in the few tens of individual loops comprising the two loop systems. With these heating rates, we then compute plasma evolution in these loops with the 'enthalpy-based thermal evolution of loops' model. The results show that, for the first set of loops, the synthetic EUV light curves from the model compare favorably with the observed light curves in six AIA channels and eight EIS spectral lines, and the computed mean enthalpy flow velocities also agree with the Doppler shift measurements by EIS. For the second set of loops modeled with twice-heating, there are some discrepancies between modeled and observed EUV light curves in low-temperature bands, and the model does not fully produce the prolonged blueshift signatures as observed. We discuss possible causes for the discrepancies.

79 ASTRONOMY AND ASTROPHYSICS↗

The flow-chart loop: temperature, density, and cooling observables supporting nanoflare coronal heating models

We have tested three controversial properties for a target loop observed with the Atmospheric Imaging Assembly: (1) overdense loops; (2) long-lifetime loops; and (3) multithermal loops. Our loop is overdense by a factor of about 10 compared to results expected from steady uniform heating models. If this were the only inconsistency, our loop could still be modeled as a single strand, but the density mismatch would imply that the heating must be impulsive. Moving on to the second observable, however, we find that the loop lifetime is at least an order of magnitude greater than the predicted cooling time. This implies that the loop cannot be composed of a single flux tube, even if the heating were dynamic, and must be multi-stranded. Finally, differential emission measure analysis shows that the cross-field temperature of the target loop is multithermal in the early and middle phases of its lifetime, but effectively isothermal before it fades from view. If these multithermal cooling results are found to be widespread, our results could resolve the original coronal loop controversy of 'isothermal' versus 'multithermal' cross-field temperatures. That is, the cross-field temperature is not always 'multithermal' nor is it always 'isothermal', but might change as the loop cools. We find that the existence and evolution of this loop is consistent with predictions of nanoflare heating.

79 ASTRONOMY AND ASTROPHYSICS↗

FY 2017-Progress Report on the Design and Construction of the Sodium Loop SMT-3

This report provides an update on the design of a forced-convection sodium loop to be used for the evaluation of sodium compatibility of advanced Alloy 709 with emphasis on long term exposures of tensile, creep, fatigue, creep fatigue, and fracture toughness ASTM-size specimens in support of ASME Code qualification and NRC licensing. The report is a deliverable (Level 4) in FY17 (M4AT-17AN1602094), under the Work Package AT-17AN160209, “Sodium Compatibility” performed by Argonne National Laboratory (ANL), as part of the Advanced Materials Program for the Advanced Reactor Technology. This work package enables the development of advanced structural materials by providing corrosion, microstructure, and mechanical property data from the standpoint of sodium compatibility of advanced structural alloys. The first sodium loop (SMT-1) with a single tank was constructed in 2011 at ANL and has been in operation for exposure of subsize sheet specimens of advanced alloys at a single temperature. The second sodium loop with dual tanks (SMT-2) was constructed in 2013 and has been in operation for the exposure of subsize sheet specimens of advanced alloys at two different temperatures. The current loop (SMT-3) has been designed to incorporate sufficient chamber capacity to expose a large number of ASTM-size specimens to evaluate the sodium effects on tensile, creep, fatigue, creep-fatigue, and fracture toughness properties, in support of ASME Code Qualification and USNRC Licensing. The design of individual components for the third sodium loop SMT-3 is almost complete. The design also has been sent to an outside vendor for piping analysis to be in compliance with ASME Code. A purchase order has been placed with an outside vendor for the fabrication of major components such as the specimen exposure tanks. However, we have contracted with another vendor to establish the piping design in compliance with ASME design codes. The piping design was completed in FY2017 and the information is being transmitted to the tank fabricator. The SMT-3 loop will be located in Building 206 adjacent to the currently operating SMT-2 loop. In addition, we have demolished the aged power supply system in Building 206 and installed a new transformer, wiring, and power panels for the new loop. Procurement of some of the long lead items such as valves, EM pumps, EM flowmeters, etc. is in progress and will continue in FY 2018. The construction of components such as cold trap, economizers, piping arrangement etc. will be performed in the central shops at ANL. About 150 liters of sodium for the loop will be procured in early FY2018. The loop system is designed to circulate sodium through the sample tanks and the associated loop without an operator for an extended period of time. With the three sodium loops (with single-tank, dual-tank and four–tanks), materials can be tested at different sodium temperatures, and large tensile, creep, fatigue, creep-fatigue, and fracture toughness specimens can be exposed to sodium for extended periods of time and generate data on mechanical properties in support of ASME Code Qualification and USNRC Licensing of advanced Alloy 709 for use as a structural material in SFRs.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

EXPLAINING INVERTED-TEMPERATURE LOOPS IN THE QUIET SOLAR CORONA WITH MAGNETOHYDRODYNAMIC WAVE-MODE CONVERSION

Coronal loops trace out bipolar, arch-like magnetic fields above the Sun’s surface. Recent measurements that combine rotational tomography, extreme-ultraviolet imaging, and potential-field extrapolation have shown the existence of large loops with inverted-temperature profiles, i.e., loops for which the apex temperature is a local minimum, not a maximum. These “down loops” appear to exist primarily in equatorial quiet regions near solar minimum. We simulate both these and the more prevalent large-scale “up loops” by modeling coronal heating as a time-steady superposition of (1) dissipation of incompressible Alfvén wave turbulence and (2) dissipation of compressive waves formed by mode conversion from the initial population of Alfvén waves. We found that when a large percentage (>99%) of the Alfvén waves undergo this conversion, heating is greatly concentrated at the footpoints and stable “down loops” are created. In some cases we found loops with three maxima that are also gravitationally stable. Models that agree with the tomographic temperature data exhibit higher gas pressures for “down loops” than for “up loops,” which is consistent with observations. These models also show a narrow range of Alfvén wave amplitudes: 3 to 6 km s{sup -1} at the coronal base. This is low in comparison to typical observed amplitudes of 20–30 km s{sup -1} in bright X-ray loops. However, the large-scale loops we model are believed to compose a weaker diffuse background that fills much of the volume of the corona. By constraining the physics of loops that underlie quiescent streamers, we hope to better understand the formation of the slow solar wind.

79 ASTRONOMY AND ASTROPHYSICS↗

OSCILLATION OF NEWLY FORMED LOOPS AFTER MAGNETIC RECONNECTION IN THE SOLAR CHROMOSPHERE

With the high spatial and temporal resolution Hα images from the New Vacuum Solar Telescope, we focus on two groups of loops with an X-shaped configuration in the dynamic chromosphere. We find that the anti-directed loops approach each other and reconnect continually. The connectivity of the loops is changed and new loops are formed and stack together. The stacked loops are sharply bent, implying that they are greatly impacted by the magnetic tension force. When another reconnection process takes place, one new loop is formed and stacks with the previously formed ones. Meanwhile, the stacked loops retract suddenly and move toward the balance position, performing an overshoot movement, which led to an oscillation with an average period of about 45 s. The oscillation of newly formed loops after magnetic reconnection in the chromosphere is observed for the first time. We suggest that the stability of the stacked loops is destroyed due to the attachment of the last new loop and then suddenly retract under the effect of magnetic tension. Because of the retraction, another lower loop is pushed outward and performs an oscillation with a period of about 25 s. The different oscillation periods may be due to their difference in three parameters, i.e., loop length, plasma density, and magnetic field strength.

79 ASTRONOMY AND ASTROPHYSICS↗

Spatial distribution of XUV emission and density in a loop prominence

The spatial distribution of XUV emission in the 14 August, 1973 loop prominence observed with the NRL spectroheliograph on Skylab is studied. The loop prominence consists of two large loops and is observed in lines from ions with temperatures ranging from 50,000 to 3,000,000 K. The loops seen in low temperature lines such as from He II, Ne VII, Mg VII, Mg VIII, and Si VIII are systematically displaced from loops seen in higher temperature lines such as from Si XII, Fe XV, and Fe XVI. The cross section of the loop, particularly in cooler lines is nearly constant along the loop. For hotter loops in Si XII, Fe XV, and Fe XVI, however, emission at the top of the loop is more intense and extended than that near the footpoints, which makes the loops appear wider at the top. The observed spatial displacement between cooler and hotter loops suggest that the 14 August loop prominence is composed of many magnetic flux tubes, each with its own temperature.

Cheng, C.-C.↗

A dynamic flare with anomalously dense flare loops

The dynamic flare of November 6, 1980 developed a rich system of growing loops which could be followed in H-alpha for 1.5 hours. Throughout the flare, these loops, near the limb, were seen in emission against the disk. Theoretical computations of b-values for a hydrogen atom reveal that this requires electron densities in the loops to be close to 10 to the 12th per cu cm. From measured widths of higher Balmer lines the density at the tops of the loops was found to be 4 x 10 to the 12th per cu cm if no nonthermal motions were present. It is now general knowledge that flare loops are initially observed in X-rays and become visible in H-alpha only after cooling. For such a high density a loop would cool through radiation from 10 to the 7th K to 10 to the 4th K within a few minutes so that the dense H-alpha loops should have heights very close to the heights of the X-ray loops. This, however, contradicts the observations obtained by the HXIS and FCS instruments on board SMM which show the X-ray loops at much higher altitudes than the loops in H-alpha. Therefore, the density must have been significantly smaller when the loops were formed and the flare loops were apparently both shrinking and becoming denser while cooling.

Svestka, Z.↗

Multi-thermal observations of newly formed loops in a dynamic flare

The dynamic flare of November 6, 1980 (max at about 15:26 UT) developed a rich system of growing loops which could be followed in H-alpha for 1.5 hr. Throughout the flare, these loops, near the limb, were seen in emission against the disk. Theoretical computations of deviations from LTE populations for a hydrogen atom reveal that this requires electron densities in the loops close to, or in excess of 10 to the 12th/cu cm. From measured widths of higher Balmer lines the density at the tops of the loops was found to be 4 x 10 to the 12th/cu cm if no nonthermal motions were present, or 5 x 10 to the 11th/cu cm for a turbulent velocity of about 12 km/s. It is now general knowledge that flare loops are initially observed in X-rays and become visible in H-alpha only after cooling. For such a high density, a loop would cool through radiation from 10 to the 7th to 10 to the 4th K within a few minutes so that the dense H-alpha loops should have heights very close to the heights of the X-ray loops. This, however, contradicts the observations obtained by the HXIS and FCS instruments on board SMM which show the X-ray loops at much higher altitudes than the loops in H-alpha. Therefore, it is suggested that the density must have been significantly lower when the loops were formed, and that the flare loops were apparently both shrinking and increasing in density while cooling.

Svestka, Zdenek F.↗

Catalytic resonance theory: Circumfluence of programmable catalytic loops

Chemical reactions on heterogeneous catalyst surfaces exhibit complex networks of elementary reactions with multiple pathways to fluid phase products, sometimes leading to surface reaction loops consisting of a closed cycle reaction pathway. While conventional catalysts at steady state exhibit zero net flux in either direction around a catalytic loop, the loop turnover frequency of three-species surface loops was evaluated in this work via microkinetic modeling to assess the reaction loop behavior resulting from a catalytic surface oscillating between two or more surface energy states. For dynamic heterogeneous catalysts undergoing applied oscillations of surface energy (i.e., programs), surface reaction loops of three species were shown to exhibit non-zero net flow of molecules around the loop, with the extent of loop turnover frequency varying with the applied frequency and amplitude of a sinusoidal or square wave oscillation. Alternatively, some dynamic surface reactions exhibited oscillations only between two surface species or resulted in surfaces covered by a single species at all times. Here, more complex behavior was observed for dynamic surface programs of three distinct electronic states, with the temporal order of applied states controlling the direction of flow of molecules within a three-molecule surface loop. Catalytic loops have the potential to limit overall catalytic reaction rates and use energy in programmable catalysts, while some applications could purposely impose non-zero loop turnover frequency for improved surface reaction control.

Catalysis↗

SPATIAL SEISMOLOGY OF A LARGE CORONAL LOOP ARCADE FROM TRACE AND EIT OBSERVATIONS OF ITS TRANSVERSE OSCILLATIONS

We present a study of transverse loop oscillations in a large coronal loop arcade, using observations from the Transition Region And Coronal Explorer (TRACE) and Extreme-ultraviolet Imaging Telescope (EIT). For the first time we reveal the presence of long-period transverse oscillations with periods between 24 minutes and 3 hr. One loop bundle, 690 Mm long and with an oscillation period of 40 minutes, is analyzed in detail and its oscillation characteristics are determined in an automated manner. The oscillation quality factor is similar to what has been found earlier for oscillations in much shorter loops. This indicates that the damping mechanism of transverse loop oscillations is independent of loop length or period. The displacement profile along the whole length of the oscillating loop is determined for the first time and consistently between TRACE and EIT. By comparing the observed profile with models of the three-dimensional geometry of the equilibrium and perturbed loop, we test the effect of longitudinal structuring (spatial seismology) and find that the observations cannot unambiguously distinguish between structuring and non-planarity of the equilibrium loop. Associated intensity variations with a similar periodicity are explained in terms of variations in the line-of-sight column depth. Also, we report intensity oscillations at the loop footpoint, which are in anti-phase with respect to the intensity oscillations in the loop body. Lastly, this observation offers the first opportunity to use the transverse oscillations of the arcade to model the Alfven speed profile in the global corona.

79 ASTRONOMY AND ASTROPHYSICS↗