Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Kepler”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Tatooine's future: the eccentric response of Kepler's circumbinary planets to common-envelope evolution of their host stars

Inspired by the recent Kepler discoveries of circumbinary planets orbiting nine close binary stars, we explore the fate of the former as the latter evolve off the main sequence. We combine binary star evolution models with dynamical simulations to study the orbital evolution of these planets as their hosts undergo common-envelope (CE) stages, losing in the process a tremendous amount of mass on dynamical timescales. Five of the systems experience at least one Roche-lobe overflow and CE stage (Kepler-1647 experiences three), and the binary stars either shrink to very short orbits or coalesce; two systems trigger a double-degenerate supernova explosion. Kepler’s circumbinary planets predominantly remain gravitationally bound at the end of the CE phase, migrate to larger orbits, and may gain significant eccentricity; their orbital expansion can be more than an order of magnitude and can occur over the course of a single planetary orbit. The orbits these planets can reach are qualitatively consistent with those of the currently known post-CE, eclipse-time variations circumbinary candidates. Our results also show that circumbinary planets can experience both modes of orbital expansion (adiabatic and nonadiabatic) if their host binaries undergo more than one CE stage; multiplanet circumbinary systems like Kepler-47 can experience both modes during the same CE stage. Additionally, unlike Mercury orbiting the Sun, a circumbinary planet with the same semimajor axis can survive the CE evolution of a close binary star with a total mass of 1 M{sub ⊙}.

79 ASTRONOMY AND ASTROPHYSICS↗

Lamost observations in the Kepler field. Analysis of the stellar parameters measured with LASP based on low-resolution spectra

All 14 subfields of the Kepler field were observed at least once with the Large Sky Area Multi-Object Fiber Spectroscopic Telescope (lamost, Xinglong Observatory, China) during the 2012–2014 observation seasons. There are 88,628 reduced spectra with a signal-to-noise ratio in the g band (S/N{sub g}) ≥ 6 after the first round (2012–2014) of observations of the lamost– Kepler project (LK-project). By adopting the upgraded version of the lamost Stellar Parameter pipeline (lasp), we have determined the atmospheric parameters (T{sub eff}, logg, and [Fe/H]) and heliocentric radial velocity v {sub rad} for 51,406 stars with 61,226 spectra. Compared with the atmospheric parameters derived from both high-resolution spectroscopy and asteroseismology for common stars in Huber et al., an external calibration of lasp atmospheric parameters was made, leading to the determination of the external errors for giants and dwarfs. Multiple spectroscopic observations of the same objects in the LK-project were used to estimate the internal uncertainties of the atmospheric parameters as a function of S/N{sub g} with the unbiased estimation method. The lasp atmospheric parameters were calibrated based on both the external and internal uncertainties for the giants and dwarfs. A general statistical analysis of the stellar parameters leads to the discovery of 106 candidate metal-poor stars, 9 candidate very metal-poor stars, and 18 candidate high-velocity stars. Fitting formulae were obtained segmentally for both the calibrated atmospheric parameters of the LK-project and the Kepler Input Catalog (KIC) parameters with common stars. The calibrated atmospheric parameters and radial velocities of the LK-project will be useful for studying stars in the Kepler field.

79 ASTRONOMY AND ASTROPHYSICS↗

Kepler-1649b: An Exo-Venus in the Solar Neighborhood

The Kepler mission has revealed that Earth-sized planets are common, and dozens have been discovered to orbit in or near their host star’s habitable zone. A major focus in astronomy is to determine which of these exoplanets are likely to have Earth-like properties that are amenable to follow-up with both ground- and future space-based surveys, with an ultimate goal of probing their atmospheres to look for signs of life. Venus-like atmospheres will be of particular interest in these surveys. While Earth and Venus evolved to have similar sizes and densities, it remains unclear what factors led to the dramatic divergence of their atmospheres. Studying analogs to both Earth and Venus can thus shed light on the limits of habitability and the potential for life on known exoplanets. Here, we present the discovery and confirmation of Kepler-1649b, an Earth-sized planet orbiting a nearby M5V star that receives incident flux at a level similar to that of Venus. We present our methods for characterizing the star, using a combination of point-spread function photometry, ground-based spectroscopy, and imaging, to confirm the planetary nature of Kepler-1649b. Planets like Kepler-1649b will be prime candidates for atmospheric and habitability studies in the next generation of space missions.

79 ASTRONOMY AND ASTROPHYSICS↗

The Gold Standard: Accurate Stellar and Planetary Parameters for Eight Kepler M Dwarf Systems Enabled by Parallaxes

We report parallaxes and proper motions from the Hawaii Infrared Parallax Program for eight nearby M dwarf stars with transiting exoplanets discovered by Kepler. We combine our directly measured distances with mass–luminosity and radius–luminosity relationships to significantly improve constraints on the host stars’ properties. Our astrometry enables the identification of wide stellar companions to the planet hosts. Within our limited sample, all the multi-transiting planet hosts (three of three) appear to be single stars, while nearly all (four of five) of the systems with a single detected planet have wide stellar companions. By applying strict priors on average stellar density from our updated radius and mass in our transit fitting analysis, we measure the eccentricity probability distributions for each transiting planet. Planets in single-star systems tend to have smaller eccentricities than those in binaries, although this difference is not significant in our small sample. In the case of Kepler-42bcd, where the eccentricities are known to be ≃0, we demonstrate that such systems can serve as powerful tests of M dwarf evolutionary models by working in L{sub ∗}--ρ{sub ∗} space. The transit-fit density for Kepler-42bcd is inconsistent with model predictions at 2.1σ (22%), but matches more empirical estimates at 0.2σ (2%), consistent with earlier results showing model radii of M dwarfs are underinflated. Gaia will provide high-precision parallaxes for the entire Kepler M dwarf sample, and the Transiting Exoplanet Survey Satellite will identify more planets transiting nearby, late-type stars, enabling significant improvements in our understanding of the eccentricity distribution of small planets and the parameters of late-type dwarfs.

79 ASTRONOMY AND ASTROPHYSICS↗

Transiting Exoplanet Monitoring Project (TEMP). III. On the Relocation of the Kepler-9 b Transit

The Kepler-9 system harbors three known transiting planets. The system holds significant interest for several reasons. First, the outer two planets exhibit a period ratio that is close to a 2:1 orbital commensurability, with attendant dynamical consequences. Second, both planets lie in the planetary mass "desert" that is generally associated with the rapid gas agglomeration phase of the core accretion process. Third, there exist attractive prospects for accurately measuring both the sky-projected stellar spin-orbit angles as well as the mutual orbital inclination between the planets in the system. Following the original Kepler detection announcement in 2010, the initially reported orbital ephemerides for Kepler-9 b and c have degraded significantly, due to the limited time base-line of observations on which the discovery of the system rested. Here, we report new ground-based photometric observations and extensive dynamical modeling of the system. These efforts allow us to photometrically recover the transit of Kepler-9 b and thereby greatly improve the predictions for upcoming transit mid-times. Accurate ephemerides of this system are important in order to confidently schedule follow-up observations of this system, for both in-transit Doppler measurements as well as for atmospheric transmission spectra taken during transit.

79 ASTRONOMY AND ASTROPHYSICS↗

The Misaligned Orbit of the Earth-sized Planet Kepler-408b

Kepler-408 is one of the 33 planet-hosting Kepler stars for which asteroseismology has been used to investigate the orientation of the stellar rotation axis relative to the planetary orbital plane. The transiting hot Earth, Kepler-408b, has an orbital period of 2.5 days and a radius of 0.86 R {sub ⊕}, making it much smaller than the planets for which spin–orbit alignment has been studied using the Rossiter–McLaughlin effect. Because conflicting asteroseismic results have been reported in the literature, we undertake a thorough re-appraisal of this system and perform numerous checks for consistency and robustness. We find that the conflicting results are due to the different models for the low-frequency noise in the power spectrum. A careful treatment of the background noise resolves these conflicts, and shows that the stellar inclination is i{sub ⋆}=42{sub −4}{sup +5} degrees. Kepler-408b is, by far, the smallest planet known to have a significantly misaligned orbit.

79 ASTRONOMY AND ASTROPHYSICS↗

Discovery of a Third Transiting Planet in the Kepler-47 Circumbinary System

Of the nine confirmed transiting circumbinary planet systems, only Kepler-47 is known to contain more than one planet. Kepler-47 b (the “inner planet”) has an orbital period of 49.5 days and a radius of about 3 R {sub ⊕}. Kepler-47 c (the “outer planet”) has an orbital period of 303.2 days and a radius of about 4.7 R {sub ⊕}. Here we report the discovery of a third planet, Kepler-47 d (the “middle planet”), which has an orbital period of 187.4 days and a radius of about 7 R {sub ⊕}. The presence of the middle planet allows us to place much better constraints on the masses of all three planets, where the 1σ ranges are less than 26 M {sub ⊕}, between 7–43 M {sub ⊕}, and between 2–5 M {sub ⊕} for the inner, middle, and outer planets, respectively. The middle and outer planets have low bulk densities, with ρ{sub middle}<0.68 g cm{sup −3} and ρ {sub outer} < 0.26 g cm{sup −3} at the 1σ level. The two outer planets are “tightly packed,” assuming the nominal masses, meaning no other planet could stably orbit between them. All of the orbits have low eccentricities and are nearly coplanar, disfavoring violent scattering scenarios and suggesting gentle migration in the protoplanetary disk.

79 ASTRONOMY AND ASTROPHYSICS↗

Kepler-90: Giant Transit-timing Variations Reveal a Super-puff

Exoplanet transit-timing variations (TTVs) caused by gravitational forces between planets can be used to determine planetary masses and orbital parameters. Most of the observed TTVs are small and sinusoidal in time, leading to degeneracies between the masses and orbital parameters. Here we report a TTV analysis of Kepler-90g and Kepler-90h, which exhibit large TTVs up to 25 hr. With optimization, we find a unique solution that allows us to constrain all of the orbital parameters. The best-fit masses for Kepler-90g and 90h are 15.0{sub −0.8}{sup +0.9} M {sub ⊕} (Earth mass) and 203{sub −5}{sup +5}M{sub ⊕}, respectively, with Kepler-90g having an unusually low apparent density of 0.15 ± 0.05 g cm{sup −3}. The uniqueness of orbital parameter solution enables a long-term dynamical integration, which reveals that although their periods are close to 2:3 orbital resonance, they are not locked in resonance, and the configuration is stable over billions of years. The dynamical history of the system suggests that planet interactions are able to raise the eccentricities and break the resonant lock after the initial formation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Standing on the shoulders of dwarfs: the kepler asteroseismic legacy sample. I. Oscillation mode parameters

The advent of space-based missions like Kepler has revolutionized the study of solar-type stars, particularly through the measurement and modeling of their resonant modes of oscillation. Here we analyze a sample of 66 Kepler main-sequence stars showing solar-like oscillations as part of the Kepler seismic LEGACY project. We use Kepler short-cadence data, of which each star has at least 12 months, to create frequency-power spectra optimized for asteroseismology. For each star, we identify its modes of oscillation and extract parameters such as frequency, amplitude, and line width using a Bayesian Markov chain Monte Carlo “peak-bagging” approach. We report the extracted mode parameters for all 66 stars, as well as derived quantities such as frequency difference ratios, the large and small separations Δν and δν{sub 02}; the behavior of line widths with frequency and line widths at ν{sub max} with T{sub eff}, for which we derive parametrizations; and behavior of mode visibilities. These average properties can be applied in future peak-bagging exercises to better constrain the parameters of the stellar oscillation spectra. The frequencies and frequency ratios can tightly constrain the fundamental parameters of these solar-type stars, and mode line widths and amplitudes can test models of mode damping and excitation.

79 ASTRONOMY AND ASTROPHYSICS↗

Kepler Data on KIC 7341653: A Nearby M Dwarf with Monster Flares and a Phase-coherent Variability

KIC 7341653 is one of several late-type M dwarfs observed by the main mission of Kepler with peculiar infrared colors placing them in the domain of suspected young stellar objects (YSO). It is likely associated with a powerful X-ray emitter with X-ray flares. Kepler light curves reveal two distinct types of activity: frequent flares lasting from less than 30 minutes to a few hours, and a periodic variability with a period of 0.5463441(7) days. The largest detected flare increased the flux in the Kepler passband by a factor of 2.8 and released an estimated 4 × 10{sup 34} erg of energy in the Kepler band. Segmented periodogram analysis reveals that the amplitude of the periodic variation was subject to secular changes, dropping from peak values around 20 ppt to below 5 ppt toward the end of the mission, while the phase varied periodically with an amplitude of 0.15 rad and period 362(3) days. Two possible interpretations of the phase periodicity are discussed: a migrating long-lived photospheric spot, and a Doppler frequency shift generated by a solar-mass faint companion, such as a white dwarf.

79 ASTRONOMY AND ASTROPHYSICS↗

Revised Stellar Properties of Kepler Targets for the Q1-17 (DR25) Transit Detection Run

The determination of exoplanet properties and occurrence rates using Kepler data critically depends on our knowledge of the fundamental properties (such as temperature, radius, and mass) of the observed stars. We present revised stellar properties for 197,096 Kepler targets observed between Quarters 1–17 (Q1-17), which were used for the final transiting planet search run by the Kepler Mission (Data Release 25, DR25). Similar to the Q1–16 catalog by Huber et al., the classifications are based on conditioning published atmospheric parameters on a grid of Dartmouth isochrones, with significant improvements in the adopted method and over 29,000 new sources for temperatures, surface gravities, or metallicities. In addition to fundamental stellar properties, the new catalog also includes distances and extinctions, and we provide posterior samples for each stellar parameter of each star. Typical uncertainties are ∼27% in radius, ∼17% in mass, and ∼51% in density, which is somewhat smaller than previous catalogs because of the larger number of improved logg constraints and the inclusion of isochrone weighting when deriving stellar posterior distributions. On average, the catalog includes a significantly larger number of evolved solar-type stars, with an increase of 43.5% in the number of subgiants. We discuss the overall changes of radii and masses of Kepler targets as a function of spectral type, with a particular focus on exoplanet host stars.

79 ASTRONOMY AND ASTROPHYSICS↗

White Dwarf Rotation as a Function of Mass and a Dichotomy of Mode Line Widths: Kepler Observations of 27 Pulsating DA White Dwarfs through K2 Campaign 8

We present photometry and spectroscopy for 27 pulsating hydrogen-atmosphere white dwarfs (DAVs; a.k.a. ZZ Ceti stars) observed by the Kepler space telescope up to K2 Campaign 8, an extensive compilation of observations with unprecedented duration (>75 days) and duty cycle (>90%). The space-based photometry reveals pulsation properties previously inaccessible to ground-based observations. We observe a sharp dichotomy in oscillation mode line widths at roughly 800 s, such that white dwarf pulsations with periods exceeding 800 s have substantially broader mode line widths, more reminiscent of a damped harmonic oscillator than a heat-driven pulsator. Extended Kepler coverage also permits extensive mode identification: we identify the spherical degree of 87 out of 201 unique radial orders, providing direct constraints of the rotation period for 20 of these 27 DAVs, more than doubling the number of white dwarfs with rotation periods determined via asteroseismology. We also obtain spectroscopy from 4 m-class telescopes for all DAVs with Kepler photometry. Using these homogeneously analyzed spectra, we estimate the overall mass of all 27 DAVs, which allows us to measure white dwarf rotation as a function of mass, constraining the endpoints of angular momentum in low- and intermediate-mass stars. We find that 0.51–0.73 M {sub ⊙} white dwarfs, which evolved from 1.7–3.0 M {sub ⊙} ZAMS progenitors, have a mean rotation period of 35 hr with a standard deviation of 28 hr, with notable exceptions for higher-mass white dwarfs. Finally, we announce an online repository for our Kepler data and follow-up spectroscopy, which we collect at http://k2wd.org.

79 ASTRONOMY AND ASTROPHYSICS↗

Characterization of Low-mass Companions to Kepler Objects of Interest Observed with APOGEE-N

We report the characterization of 28 low-mass (0.02 M ⊙ ≤ M 2 ≤ 0.25 M ⊙ ) companions to Kepler objects of interest (KOIs), eight of which were previously designated confirmed planets. These objects were detected as transiting companions to Sunlike stars (G and F dwarfs) by the Kepler mission and are confirmed as single-lined spectroscopic binaries in the current work using the northern multiplexed Apache Point Observatory Galactic Evolution Experiment near-infrared spectrograph (APOGEE-N) as part of the third and fourth Sloan Digital Sky Surveys. We have observed hundreds of KOIs using APOGEE-N and collected a total of 43,175 spectra with a median of 19 visits and a median baseline of ~1.9 yr per target. We jointly model the Kepler photometry and APOGEE-N radial velocities to derive fundamental parameters for this subset of 28 transiting companions. The radii for most of these low-mass companions are overinflated (by ~10%) when compared to theoretical models. Tidally locked M dwarfs on short-period orbits show the largest amount of inflation, but inflation is also evident for companions that are well separated from the host star. We demonstrate that APOGEE-N data provide reliable radial velocities when compared to precise high-resolution spectrographs that enable detailed characterization of individual systems and the inference of orbital elements for faint (H > 12) KOIs. The data from the entire APOGEE-KOI program are public and present an opportunity to characterize an extensive subset of the binary population observed by Kepler.

79 ASTRONOMY AND ASTROPHYSICS↗

The Kepler Mission: A Photometric Search for Earthlike Planets

If Earth lies in or near the orbital plane of an extrasolar planet, that planet passes in front of the disk of its star once each orbit as viewed from Earth. Precise photometry can reveal such transits, which can be distinguished from rotationally-modulated starspots and intrinsic stellar variability by their periodicity, square-well shapes and relative spectral neutrality. Transit observations would provide the size and orbital period of the detected planet. Although geometrical considerations limit the fraction of planets detectable by this technique, many stars can be surveyed within the field of view of one telescope, so transit photometry is quite efficient. Scintillation in and variability of Earth's atmosphere limit photometric precision to roughly one-thousandth of a magnitude, allowing detection of transits by Jupiter-sized planets but not by Earth-sized planets from the ground. The COROT spacecraft will be able to detect Uranus-sized planets orbiting near stars. The Kepler Mission, which is being proposed to NASA's Discovery Program this year, will have a photometer with a larger aperture (1 meter) than will COROT, so it will be able to detect transits by planets as small as Earth. Moreover, the Kepler mission will examine the same star field for four years, allowing confirmation of planets with orbital periods of a year. If the Sun's planetary system is typical for single stars, Kepler should detect approximately 480 terrestrial planets. Assuming the statistics from radial velocity surveys are typical, Kepler should also detect transits of 150 inner giant planets and reflected light variations of 1400 giant planets with orbital periods of less than one week.

Lissauer, Jack J.↗

Comparison of the Kepler and Eddington Missions

The Kepler and Eddington missions are spaceborne photometric missions with similar apertures. Both are capable of finding Earth-size extrasolar planets and both can detect p-mode oscillations in stars. The Kepler mission is optimized to find Earth-size planets in the habitability zone of Solar-like stars and does astroseismology only as incidental science. The Eddington mission appears to be optimized for astroseismology. The Kepler design provides a very large field of view, a low measurement cadence, a heliocentric orbit, and a long mission duration. The demand for a large field-of-view results in a Schmidt design with a massive corrector. However, the use of the corrector allows a 105 square degree FOV and thereby provides 15 times the number of stars at a given magnitude than does the optical design used in Eddington. Because Kepler stares at a single FOV throughout the mission, it does much less astroseismology than Eddington. Other comparisons are also discussed.

Borucki, William J.↗

The Kepler Full Frame Images

NASA's exoplanet discovery mission Kepler provides uninterrupted 1-min and 30-min optical photometry of a 100 square degree field over a 3.5 yr nominal mission. Downlink bandwidth is filled at these short cadences by selecting only detector pixels specific to 105 preselected stellar targets. The majority of the Kepler field, comprising 4 x 10(exp 6) m_v < 20 sources, is sampled at much lower 1-month cadence in the form of a full-frame image. The Full Frame Images (FFIs) are calibrated by the Science Operations Center at NASA Ames Research Center. The Kepler Team employ these images for astrometric and photometric reference but make the images available to the astrophysics community through the Multimission Archive at STScI (MAST). The full-frame images provide a resource for potential Kepler Guest Observers to select targets and plan observing proposals, while also providing a freely-available long-cadence legacy of photometric variation across a swathe of the Galactic disk.

Dotson, Jessie L.↗

Kepler Planet Detection Mission: Introduction and First Results

The Kepler Mission is designed to determine the frequency of Earth-size and rocky planets in and near the habitable zone (HZ) of solar-like stars. The HZ is defined to be the region of space where a rocky planet could maintain liquid water on its surface. Kepler is the 10th competitively-selected Discovery Mission and was launched on March 6, 2009. Since completing its commissioning, Kepler has observed over 156,000 stars simultaneously and near continuously to search for planets that periodically pass in front of their host star (transit). The photometric precision is approximately 23 ppm for 50% of the 12th magnitude dwarf stars for an integration period of 6.5 hours. During the first 3 months of operation the photometer detected transit-like signatures from more than 200 stars. Careful examination shows that many of these events are false-positives such as small stars orbiting large stars or blends of target stars with eclipsing binary stars. Ground-based follow-up observations confirm the discovery of five new exoplanets with sizes between 0.37 andl.6 Jupiter radii (R(sub J)) and orbital periods ranging from 3.2 to 4.9 days. Ground-based observations with the Keck 1, Hobby-Ebberly, Hale, WIYN, MMT, Tillinghast, Shane, and Nordic Optical Telescopes are used to vet the planetary candidates and measure the masses of the putative planets. Observations of occultations and phase variations of hot, short-period planets such as HT-P-7b provide a probe of atmospheric properties. Asteroseismic analysis already shows the presence of p-mode oscillations in several stars. Such observations will be used to measure the mean stellar density and infer the stellar size and age. For stars too dim to permit asteroseismology, observations of the centroid motion of target stars will be used to measure the parallax and be combined with photometric measurements to estimate stellar sizes. Four open clusters are being observed to determine stellar rotation rates as a function of age and spectral type. Many different types of stellar variability are observed with unprecedented precision and over a wide range of time scales. Solar-like photometric variability of thousands of field stars is being studied to determine how photometric variability and the stellar rotation rates change with stellar age and metallicity. A wide variety of other astrophysical phenomena have also been observed. The data are being analyzed at the Ames Research Center and archived at the MAST at STScI. The Kepler Mission also supports a vigorous Guest Observer Program.

Borucki, William↗

The Kepler Science Operations Center Pipeline Framework Extensions

The Kepler Science Operations Center (SOC) is responsible for several aspects of the Kepler Mission, including managing targets, generating on-board data compression tables, monitoring photometer health and status, processing the science data, and exporting the pipeline products to the mission archive. We describe how the generic pipeline framework software developed for Kepler is extended to achieve these goals, including pipeline configurations for processing science data and other support roles, and custom unit of work generators that control how the Kepler data are partitioned and distributed across the computing cluster. We describe the interface between the Java software that manages the retrieval and storage of the data for a given unit of work and the MATLAB algorithms that process these data. The data for each unit of work are packaged into a single file that contains everything needed by the science algorithms, allowing these files to be used to debug and evolve the algorithms offline.

Klaus, Todd C.↗