Junction capacitance as a function of voltage for diffused p-n diodes with exponential doping gradients
Capacitance calculation for diffused p-n junction with exponential doping gradients
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Capacitance calculation for diffused p-n junction with exponential doping gradients
MoS 2 is a two-dimensional material with a band gap depending on the number of layers and tunable by an external electric field. The experimentally observed intralayer band-to-band tunneling and interlayer band-to-band tunneling in this material present an opportunity for new electronic applications in tunnel field-effect transistors. However, such a widely accepted concept has yet to be been supported by theoretical investigations based on first principles. In this paper, using density functional theory, in conjunction with nonequilibrium Green's function techniques and our electric field gating method, enabled by a large-scale computational approach, we study the relation between band alignment and transmission in planar and side-stack MoS 2 p–i–n junction configurations. Here, we demonstrate the presence of negative differential resistance for both in-plane and interlayer current, a staple characteristic of tunnel diode junctions, and analyze the physical origin of such an effect. Electrostatic potentials, the van der Waals barrier, and a complex band analysis are also examined for a thorough understanding of Esaki diodes.
Synchrotron radiation (SR) is a fundamental tool for X-ray research. In particular, X-ray absorption spectroscopy (XAS) accesses information as electronic properties, local structure or chemical-physical state in condensed-matter studies. Ionization chambers (ICs) are the most widely used XAS detectors for transmission measurements because of their reliability, high linearity and good stability. Recently, solid-state detectors have been considered and Si p-i-n has been applied to high fluxes (10{sup 11} ph/s), where the linearity of ICs is no longer guaranteed. Silicon photodiodes exhibit an extremely linear response in at least 5 decades but show diffraction peaks. Diamond is an ideal substrate to produce radiation-hard, low dark current (<1 pA/cm{sup 2}), visible-blind and fast-response X-ray detectors with a high S/N ratio. Diamond detectors were tested as SR monitor capable to withstand the high photon flux density of the 3{sup rd} generation SR sources. Being the lowest X-ray-absorbing solid-state dielectric material, diamond maximizes the flux through thin self-standing devices with minimal spectral effect down to the soft x-ray range. We will present results of X-ray tests of photoconductors based on different diamond substrates. The results will be compared to standard ICs for XAS applications in terms of spectral quality, noise and linearity in the 4-13 keV energy range.
We theoretically investigate heat transport in hybrid normal metal-superconductor (NS) nanojunctions focusing on the effect of thermal rectification. We show that the heat diode effect in the junction strongly depends on the transmissivity and the nature of the NS contact. Thermal rectification efficiency can reach up to ∼123% for a fully transmissive ballistic junction and up to 84% in diffusive NS contacts. Both values exceed the rectification efficiency of a NIS tunnel junction (I stands for an insulator) by a factor close to ∼5 and ∼3, respectively. Furthermore, we show that for NS point-contacts with low transmissivity, inversion of the heat diode effect can take place. Our results could prove useful for tailoring heat management at the nanoscale, and for mastering thermal flux propagation in low-temperature caloritronic nanocircuitry.
Monolithic optical sensor with readout electronics are needed in optical communication, medical imaging and scintillator based gamma spectroscopy system. This paper presents the design of three different CMOS photodiode test structures and two readout channels in a commercial CMOS technology catering to the need of nuclear instrumentation. The three photodiode structures each of 1 mm{sup 2} with readout electronics are fabricated in 0.35 um, 4 metal, double poly, N-well CMOS process. These photodiode structures are based on available P-N junction of standard CMOS process i.e. N-well/P-substrate, P+/N-well/P-substrate and inter-digitized P+/N-well/P-substrate. The comparisons of typical characteristics among three fabricated photo sensors are reported in terms of spectral sensitivity, dark current and junction capacitance. Among the three photodiode structures N-well/P-substrate photodiode shows higher spectral sensitivity compared to the other two photodiode structures. The inter-digitized P+/N-well/P-substrate structure has enhanced blue response compared to N-well/P-substrate and P+/N-well/P-substrate photodiode. Design and test results of monolithic readout electronics, for three different CMOS photodiode structures for application related to nuclear instrumentation, are also reported.
We experimentally investigate and analyze the electrical and optical characteristics of InGaAs/GaAs conventional quantum well laser diode and the quantum well laser diode with slightly-doped tunnel junction. It was found that the laser with slightly-doped tunnel junction has a nonlinear S-shape current-voltage characteristic. The internal quantum efficiencies of the laser with slightly-doped tunnel junction and the conventional laser are 21 and 87.3%, respectively. This suggests that the slightly-doped tunnel junction increased the barrier width and free carrier absorption, thus could reduce the electron tunneling probability and increase the internal loss. Furthermore, compared with the conventional laser, it was found that we could achieve 15 nm broadband spectrum from the laser with slightly-doped tunnel junction, due to the lasing dynamics reflecting the current dynamics. The results show that the slightly-doped tunnel junction plays a crucial role in the laser diode performances, which may lead to the realization of more applications.
ZnO radial p–n junction architecture has the potential for forward-leap of light-emitting diode (LED) technology in terms of higher efficacy and economical production. Here, we report on ZnO radial p–n junction-based light emitting diodes prepared by full metalorganic chemical vapour deposition (MOCVD) with hydrogen-assisted p-type doping approach. The p-type ZnO(P) thin films were prepared by MOCVD with the precursors of dimethylzinc, tert-butanol, and tertiarybutylphosphine. Controlling the precursor flow for dopant results in the systematic change of doping concentration, Hall mobility, and electrical conductivity. Moreover, the approach of hydrogen-assisted phosphorous doping in ZnO expands the understanding of doping behaviour in ZnO. Ultraviolet and visible electroluminescence of ZnO radial p–n junction was demonstrated through a combination of position-controlled nano/microwire and crystalline p-type ZnO(P) radial shell growth on the wires. Lastly, the reported research opens a pathway of realisation of production-compatible ZnO p–n junction LEDs.
An experimental study of p−La{sub 0.7}Ca{sub 0.3}MnO{sub 3}/SrTiO{sub 3}/n−Si heterostructure in which La{sub 0.7}Ca{sub 0.3}MnO{sub 3} (LCMO) and Si are separated by a thin interfacial SrTiO{sub 3} (STO) layer with typical thickness ∼ 15 nm, has been in situ fabricated with the pulsed laser deposition technique. The junction exhibits good rectifying diode like behavior over the temperature range of 10 - 300 K. The heterostructure also exhibits metal-oxide-semiconductor like behavior with all type of possible current flow mechanisms through the heterojunction. The junction magnetoresistance (JMR) (∼ 30% at 300 K) properties of p-LCMO/STO/n-Si heterostructure have been studied over the temperature range of 100-300 K. The JMR is positive and strongly depends on temperature at an applied forward bias voltage of 3 V. The relation between JMR and external magnetic field is found to be Δρ/ρ≈ α H{sup β} type, having both α and β temperature dependent. We attribute the emergence of positive JMR to the quantum mechanical tunneling transport mechanism across the heterojunction.
A bipolar transistor in series with the battery as the control element also in series with a zener diode and a resistor is used to maintain a predetermined voltage until the battery voltage decays to very nearly the predetermined voltage. A field effect transistor between the base of the bipolar transistor and a junction between the zener diode and resistor regulates base current of the bipolar transistor, thereby regulating the conductivity of the bipolar transistor for control of the output voltage.
ZnO p-n homojunctions based on Sb-doped p-type nanowire array and n-type film were grown by combining chemical vapor deposition (for nanowires) with molecular-beam epitaxy (for film). Indium tin oxide and Ti/Au were used as contacts to the ZnO nanowires and film, respectively. Characteristics of field-effect transistors using ZnO nanowires as channels indicate p-type conductivity of the nanowires. Electron beam induced current profiling confirmed the existence of ZnO p-n homojunction. Rectifying I-V characteristic showed a turn-on voltage of around 3 V. Very good response to ultraviolet light illumination was observed from photocurrent measurements.
Here in this study, we review the history and progress of solid-state heat harvesting. Efficiency models, material metrics, and current research are discussed for thermoelectrics, thermionics, laser-coolers, and modern technologies. Then, we discuss nonequilibrium optical phonon harvest in the phonovoltaic cell. We make an effort to distinguish between the harvest of equilibrium heat, or thermal-electricity, and the targetted harvest of a particular nonequilibrium phonon mode, or phonoelectricity. We survey the state of phonovoltaic research, focusing on phonovoltaic materials, the electron-phonon coupling, and entropy production in a phonovoltaic cell. Throughout this review, discussions are connected to the electron and phonon structures, interactions, and transport. The modern thermal-electric harvesters are shown to reshape broad-spectrum, high-entropy heat into a narrow-spectrum of low-entropy emissions in order to efficiently generate thermal-electricity. Phonoelectricity, in contrast, intervenes before a low-entropy population of nonequilibrium optical phonons becomes high-entropy heat. In particular, the phonovoltaic cell generates phonoelectricity by utilizing the nonequilibrium, low-entropy, and high temperature optical phonon population produced by, e.g., the relaxation of electrons excited by an electric field. A phonovoltaic material has an ultranarrow electronic bandgap, such that the hot optical phonon population can relax by producing electron-hole pairs (and power) instead of multiple acoustic phonons (and entropy). The phonovoltaic device has an electric diode, e.g., a p-n junction, such that the internal electric field of the diode splits the electrons and holes in order to produce an electric current, and thus, power. The low entropy and high-temperature of the nonequilibrium optical phonon population enable efficient, in-situ heat harvesting. Bilayer graphene, for example, can theoretically convert the nonequilibrium population of optical phonons generated in a field-effect transistor into electricity with an efficiency exceeding 70% of the Carnot limit. The thermal-electric devices, in contrast, are either inefficient or restricted to ex-situ power generation. Lastly, as the phonoelectric Carnot limit is defined by the local nonequilibrium between electron and optical phonon populations, rather than the spatial nonequilibrium across the device, the Carnot limit can be very large without inducing melting.
GaN p ++ /n ++ tunnel junctions (TJs) with heavy bulk or delta Mg doping at the junction were grown via molecular beam epitaxy with a hysteresis-free and repeatable negative differential resistance (NDR). The TJ with Mg doping of 5.5 × 10 20 cm -3 shows NDR at~1.8 V and a large current density of 3.4 KA/cm 2 at -1.0 V. Atomic resolution scanning transmission electron microscopy imaging showed no additional defects despite the doping exceeding the solubility limit in GaN allowing subsequent epitaxy of series-connected layers and devices. GaN homojunction TJs grown on bulk GaN showed an improved current density and NDR stability. In addition, the effect of Mg delta doping at the junction was investigated for the first time showing a dramatic improvement in the tunneling characteristics. A metal-organic chemical vapor deposition (MOCVD) grown InGaN light-emitting diode (LED) with an MBE grown GaN homojunction tunnel contact to the MOCVD grown p-GaN layer shows superior lateral conductivity and improved luminescence uniformity, but suffers an added voltage penalty, assumed to be due to interface impurities, compared to control LED with indium-tin-oxide.
Abstract To improve the manufacturing of vertical GaN devices for power electronics applications, the effects of defects in GaN substrates need to be better understood. Many non-destructive techniques including photoluminescence, Raman spectroscopy and optical profilometry, can be used to detect defects in the substrate and epitaxial layers. Raman spectroscopy was used to identify points of high crystal stress and non-uniform conductivity in a substrate, while optical profilometry was used to identify bumps and pits in a substrate which could cause catastrophic device failures. The effect of the defects was studied using vertical P-i-N diodes with a single zone junction termination extention (JTE) edge termination and isolation, which were formed via nitrogen implantation. Diodes were fabricated on and off of sample abnormalities to study their effects. From electrical measurements, it was discovered that the devices could consistently block voltages over 1000 V (near the theoretical value of the epitaxial layer design), and the forward bias behavior could consistently produce on-resistance below 2 mΩ cm 2 , which is an excellent value considering DC biasing was used and no substrate thinning was performed. It was found that high crystal stress increased the probability of device failure from 6 to 20%, while an inhomogeneous carrier concentration had little effect on reverse bias behavior, and slightly (~ 3%) increased the on-resistance (R on ). Optical profilometry was able to detect regions of high surface roughness, bumps, and pits; in which, the majority of the defects detected were benign. However a large bump in the termination region of the JTE or a deep pit can induce a low voltage catastrophic failure, and increased crystal stress detected by the Raman correlated to the optical profilometry with associated surface topography.
We present a comprehensive characterization of the memory effect arising in thin-junction silicon Single-Photon Avalanche Diodes (SPADs) when exposed to strong illumination. This partially unknown afterpulsing-like noise represents the main limiting factor when time-gated acquisitions are exploited to increase the measurement dynamic range of very fast (picosecond scale) and faint (single-photon) optical signals following a strong stray one. We report the dependences of this unwelcome signal-related noise on photon wavelength, detector temperature, and biasing conditions. Our results suggest that this so-called “memory effect” is generated in the deep regions of the detector, well below the depleted region, and its contribution on detector response is visible only when time-gated SPADs are exploited to reject a strong burst of photons.
It is possible to synthesize a voltage-controlled negative-differential-resistance (NDR) device or circuit by use of a pair of complementary G4FETs (four-gate field-effect transistors). [For more information about G4FETs, please see the immediately preceding article]. As shown in Figure 1, the present voltage-controlled NDR device or circuit is an updated version of a prior NDR device or circuit, known as a lambda diode, that contains a pair of complementary junction field-effect transistors (JFETs). (The lambda diode is so named because its current-versus- voltage plot bears some resemblance to an upper-case lambda.) The present version can be derived from the prior version by substituting G4FETs for the JFETs and connecting both JFET gates of each G4FET together. The front gate terminals of the G4FETs constitute additional terminals (that is, terminals not available in the older JFET version) to which one can apply control voltages VN and VP. Circuits in which NDR devices have been used include (1) Schmitt triggers and (2) oscillators containing inductance/ capacitance (LC) resonant circuits. Figure 2 depicts such circuits containing G4FET NDR devices like that of Figure 1. In the Schmitt trigger shown here, the G4FET NDR is loaded with an ordinary inversion-mode, p-channel, metal oxide/semiconductor field-effect transistor (inversion-mode PMOSFET), the VN terminal of the G4FET NDR device is used as an input terminal, and the input terminals of the PMOSFET and the G4FET NDR device are connected. VP can be used as an extra control voltage (that is, a control voltage not available in a typical prior Schmitt trigger) for adjusting the pinch-off voltage of the p-channel G4FET and thereby adjusting the trigger-voltage window. In the oscillator, a G4FET NDR device is loaded with a conventional LC tank circuit. As in other LC NDR oscillators, oscillation occurs because the NDR counteracts the resistance in the tank circuit. The advantage of this G4FET-NDR LC oscillator over a conventional LC NDR oscillator is that one can apply a time-varying signal to one of the extra control input terminals (VN or VP) to modulate the conductance of the NDR device and thereby amplitude-modulate the output signal.
Formation of metal-semiconductor (M-S) contacts at sub-20 nanometer range is a key requirement for down-scaling of semiconductor devices. However, electrical measurements of M-S contacts at this scale have exhibited dramatic change in the current-voltage (I-V) characteristics compared to that of conventional (or planar) Schottky contacts. This change is actually attributed to the limited metal contact region where the transferred charge from the semiconductor into the metal is confined to a small surface area, which in turn results in an enhanced electric field at the nano-M-S interface. We here present detailed theoretical models to analyze the nano-M-S junctions at 10 nm contact range and then implement this analysis on the experimental data we conducted under these conditions. Both theoretical and experimental results demonstrate a significant effect of the contact size on the electronic structure of the M-S junctions and thus on the I-V characteristics. This effect is rather prominent when the size of the metal contact is substantially smaller than the width of conventional depletion region of the relevant planar M-S contacts.
We have studied the photovoltaic effect in a metal/semiconductor/ferroelectric/metal heterostructure of In{sub 2}O{sub 3}-SnO{sub 2}/ZnO/BiFeO{sub 3}/Pt (ITO/ZnO/BFO/Pt) multilayer thin films. The heterolayered structure shows a short-circuit current density (J{sub sc}) of 340 μA/cm{sup 2} and an energy conversion efficiency of up to 0.33% under blue monochromatic illumination. The photovoltaic mechanism, specifically in terms of the major generation site of photo-excited electron-hole (e-h) pairs and the driving forces for the separation of e-h pairs, is clarified. The significant increase in photocurrent of the ITO/ZnO/BFO/Pt compared to that of ITO/BFO/Pt is attributed to the abundant e-h pairs generated from ZnO. Ultraviolet photoelectron spectroscopy reveals the energy band alignment of ITO/ZnO/BFO/Pt, where a Schottky barrier and an n{sup +}-n junction are formed at the BFO/Pt and ZnO/BFO interfaces, respectively. Therefore, two built-in fields developed at the two interfaces are constructively responsible for the separation and transport of photo-excited e-h pairs.