Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Isotopes and Radiation Sources”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Isotopic analysis of plutonium measured with very thick absorbers and high-granularity spectra

FRAM is LANL-designed software designed to extract plutonium and uranium isotopic information from gamma ray spectra. This is an important capability for NEST and STAB; however, FRAM performance has been poor when applied to field data collected in these programs. FRAM Version 5 (commercially available) was fine-tuned and validated for laboratory quality measurements but not for measurements of the high-mass and heavily shielded SNM items encountered in NEST. FRAM is untested for spectra collected with high-granularity lower resolution instruments such as the new 8-MeV Detective-X favored by STAB or the new custom electrocooled systems coming into use for NEST. FRAM Version 6.1 (unreleased) has improvements in physics capabilities, and parameter sets may be adapted that are more specific to NEST and STAB, which is what we have attempted for this assignment. Thick shielding attenuates gamma rays profoundly, especially those at low energy, making them too weak to be measured. The missing low-energy peaks force the analysis to employ only the highest-energy peaks. We adapted FRAM 6.1 for analysis of plutonium spectra obtained with very thick Pb filters (a surrogate for NEST-type configurations). New parameter sets employing only very high energy peaks were created for the analysis. High granularity and low resolution make deconvolution of the 600-keV region particularly challenging, and we have worked to optimally extract information from this region. The results shown in this paper give high confidence that we are on the right track. We used a combination of real and synthetically-modified data. Remaining work includes testing the new software and parameters against genuine data collected with Detective-X and new NEST systems, but such datasets at the moment are unavailable. It also remains to develop and test parameter sets specific to uranium and the new detectors.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2020

Physical Sciences Vistas Issue 2, 2020

Dedication and collaboration accelerate mission-essential LANSCE isotope production; Rigorous operations result in newly outfitted gloveboxes; Continuous improvements deliver high-value subcrit data; 'Magnet surge’ expands capabilities for higher tesla science.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2020

Technical Interface Coordination with SHINE (FY2020 Summary)

In FY20, Los Alamos National Laboratory (LANL) performed technical interface coordination with SHINE including coordination of SHINE CFD and thermal hydraulics conference calls, national laboratory conference calls, and program management activities such as reporting and tracking requirements for current FY20 activities. SHINE did not request any general technology consultation support for emergent issues. LANL has participated in the bi-weekly conference calls with SHINE and other national laboratories regarding LANL’s current activities. Activities discussed include the Supo 3-D CFD model geometry validation, releasing the CFD-MCNP coupled codes for the generic solution vessel simulations, and the ANL bubble experiment #2 design, preparation, and collaboration.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2020

Measurement results for 60Co Assay baskets H5, H9, H14, H15, A4, and B3 (C003, C001, C005, C022, C021, C020, C032, C033, C038, C035, C036, C039, C053, C054, C055, C065, C066, & C067)

Eighteen cobalt targets (C003, C001, C005, C022, C021, C020, C032, C033, C038, C035, C036, C039, C053, C054, C055, C065, C066, & C067) were assayed on July 28-29, 2020, following irradiation in ATR cycle 168A. The average specific activity of each target was determined by using the cobalt assay system located in the ATR canal following procedure ACMM-3610.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2020

Fission Gas Measurements in Spent Fuel: Literature Review

The fission-derived noble gases, xenon(Xe) and krypton(Kr), have long been proposed as a tool for supporting nuclear safeguards and declarations verification. A vast body of literature outlines how these non-reactive fission gases released during reactor operation and shutdowns correlate to burnup level, power history, other reactor specifications and reprocessing activities. However, irradiation conditions can vary appreciably both radially and axially within a fuel pin.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2020

American Chemical Society's summer school in nuclear and radiochemistry. Final report

The ACS Summer Schools in Nuclear and Radiochemistry (herein called “Summer Schools”) were held each year at San Jose State University (SJSU) and Brookhaven National Laboratory (BNL). The Summer Schools are an intensive, six-week program that includes both a lecture component covering fundamental principles of nuclear chemistry and radiochemistry and a laboratory component providing hands-on experience for the students to observe and test many of the basic principles that they learn about in lecture and in the special seminars. Each site hosts 12 undergraduate students annually. Participants are selected from a nation-wide pool of applicants who are currently enrolled as undergraduates seeking bachelors’ degrees, preferably in disciplines of physical sciences or engineering. To broaden the students’ perspectives on nuclear science, prominent research scientists active in nuclear and/or radiochemical research participate in a Guest Lecture Series. Symposia emphasizing nuclear security, nuclear medicine, and career opportunities are conducted as a part of the program.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2020

Modifications to the Bubble experiment and preparation for additional irradiations

SHINE Medical Technologies is planning to use neutron-induced fission in a subcritical low-enriched-uranium uranyl sulfate target solution for production of 99 Mo. During this operation, the solution will undergo self-heating due to fissioning of the uranium, radiolytic decomposition of the water, and circulation due to thermal gradients generated in the solution, and will be cooled by cooling tubes running through the annulus and from cooling outside the annulus. Because the formation of the radiolysis-induced bubbles (H 2 and O 2 ) and their size and dynamics will impact the operational parameters of the liquid target, an understanding of bubble behavior is critical for the ability to predict the behavior of the target solution during this operation. It is also important to be able to predict the thermal gradients and the circulation in the vessel. Researchers at Argonne National Laboratory have designed an experimental setup to study radiolytic gas formation in uranyl sulfate under direct electron beam irradiation and have conducted initial experiments. Results of those experiments provided invaluable information on thermal hydraulic behavior of the solution and some information on bubble formation and behavior, but those initial experiments fell short in the measurements of the gas generation rates and bubble behavior. To address the shortcomings of the original experiment, the irradiation setup was modified to improve our abilities to measure gas generation rates and measure the temperature distribution in the solution with better precision. Modifications to the experimental setup and preparation for the irradiations are described below.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2020

Chemical Modeling of the Capture of Radioiodine Species

Iodine is a common fission product resulting from the transmutation of uranium fuel in nuclear power reactors. The short-lived radioactive isotope, 131 I, with a half-life of around eight days, would be a particular health concern if released into the environment. Capture materials, such as activated carbon, are used routinely in nuclear power plants and medical isotope production facilities to remove this hazard during normal operations to reduce emissions to acceptable levels. Iodine, unlike other common fission products such as noble gases, is challenging because of the wide range of molecular forms and oxidation states (from +VII in IF 7 to -I in iodide) that it displays, which can interconvert both in the gas phase and in the solution phase for example. The work in this project is focused on three computational tasks. In the first, we consider the binding of iodine-containing molecules of varying oxidation states to the major component of activated carbon – pristine graphene-like sheets. The second task focused on molecular binding and possible chemical transformations resulting from the reaction of molecular iodine with chemical functional groups on the edge of the graphene sheets or surface defects in the sheet itself. The final task was associated with radiolytic breakdown of 131 I to 131 Xe in iodine containing molecules and investigated the resulting molecular fragmentation process both in the gas phase and on the graphene-like surface. For each of the tasks, the intent was to learn about the thermodynamics and kinetics of the chemical transformations and use the calculations to provide parameters for input into kinetic models describing these processes for interpretation of experimental data in future work.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2021

Molybdenum Recovery from Filters Used in Large-scale Dissolution of Sintered Mo-disks

99 Mo production with linear accelerators can be achieved via the bremsstrahlung photonuclear reaction 100 Mo(γ,n) 99 Mo or the neutron capture reaction 98 Mo(n,γ) 99 Mo. For commercial producers, maximum recovery of enriched 98 Mo and 100 Mo target material is critical for sustaining an economic production cycle. During the peroxide dissolution of Mo metal disks and subsequent conversion to K 2 MoO 4 , several grams of Mo can be lost during filtration from solution when several hundred grams of sintered Mo disks are processed. This investigation shows that 5–8 g Mo is routinely retained on the filter units, but it can be almost fully recovered using aqueous washes. Washing can be done immediately and incorporated into the dissolution procedure, or it can occur several months after the initial filtration process to decrease processing time.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2020

Development and Optimization of a Purification Process to Recover 99 Mo from Low-enriched Uranium

Supported by the DOE-NNSA Office of Material Management & Minimization (M3), a number of domestic entities are pursuing non-highly enriched uranium (non-HEU) production of 99 Mo. As the production technologies of 99Mo pivot toward low-enriched uranium (LEU) or molybdenum targets, new reaction channels and accelerators are being evaluated. Superconducting electron linear accelerators (LINACs) with high-Z converter targets can generate bremsstrahlung photons and neutron fluxes that are capable of inducing photonuclear reactions and LEU fission. A particular advantage of a LINAC is that it does not rely on HEU-fueled reactor cores (which are currently slated for LEU conversion) and can operate on an almost continuous basis. Regarding the chemical purification of 99 Mo from irradiated uranium targets under acidic digestion, there exists a procedure known as Cintichem or modifications thereof with respect to LEU (LEU Modified Cintichem process, LMC). The process relies on a number of selective precipitation steps and column chromatography to purify Mo. It is important to note that LMC prescribes the addition of stable Mo to carry 99 Mo on alpha benzoin oxime, which reduces the specific activity of 99 Mo. This is especially important for processing 99 Mo batches with lower activities (~33 Ci of 99 Mo per batch).

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2021

Monitoring Radiochemical Processing Streams for the 238 Pu Supply Program with Process Pulse II

Oak Ridge National Laboratory (ORNL) is developing advanced spectroscopic and real-time monitoring capabilities to improve the timeliness of analytical measurements and process decisions for the 238Pu Supply Program. Reducing the time, resources, and costs associated with each production campaign is critical because overlapping campaigns will be required to meet the production goals of the National Aeronautics and Space Administration. Real-time, in situ analytical measurements in the heavily shielded hot cells at the Radiochemical Engineering Development Center (REDC) will allow for rapid process information feedback and operational benefits that help the 238Pu supply program scale-up production efforts. Noteworthy steps were taken during Campaign 5 to establish the ability to monitor processing streams in real time with spectrophotometry and a commercially available online monitoring software called The Unscrambler X Process Pulse II (PP) multivariate statistical process monitoring system by Camo Analytics (version 5.60). PP automates univariate-type calculations within the software itself and executes multivariate models built using The Unscrambler X (version 10.4 or newer). The Unscrambler is a commercially available data analysis software made by the same company. PP is composed of easy-to-use-tools for all personnel, including data scientists and technicians. The software can be used to plot analyte concentration profiles, spectral data, and other process variables in real time. All process data are represented in a single view with interactive charts useful for viewing how a process evolves over time.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2020

Building Assessment of Radon Reduction Interventions with Energy Retrofits Expansion (The BEX Study): Final Report

This report presents the findings from a study that was performed to assess whether current precautionary measures used by the US Department of Energy Weatherization Assistance Program (WAP) are effective for preventing indoor radon increases following weatherization. The study results show that current practices have produced substantial benefit compared to previous practices, and that there are no statistically significant changes in indoor radon levels on the lowest living levels with these practices following weatherization.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2021

Export Administration Regulations (EAR) and Radiation Tolerant Microelectronics

Sandia National Laboratories was asked to provide a technical feasibility assessment on whether programmability is a viable means to address the radiation levels in the Export Administration Regulations (EAR). Most (if not all) modern Complementary Metal Oxide Semiconductor (CMOS) technologies will exceed at least one of the EAR radiation criteria inherently, there is no longer anything “special” about domestic parts or technologies that exceed EAR radiation criteria. A modern part today is not “designed” to exceed EAR criteria and in fact a part would need to be “specially designed” to fail to meet all of these criteria. And although it is possible to design a part to fail to meet the EAR radiation criteria in an unprogrammed state, such a part would be difficult to design in some technologies, may not achieve the ultimate radiation levels desired, would fail to meet core reliability principles, and may be unsuitable for high consequence applications.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2021

Boson Fermion Nucleus And Previous Research On Alpha Clustering And Tetrahedral Structure In The Nucleus: Monograph #9

For 80 years, the presence of alpha clusters in nuclei and nuclei with tetrahedral structures has been studied in theory and researched in experiment. Scattering experiments have detected alpha clusters in heavy nuclei. The theoretical treatment of this evidence has considered close-packed alpha clusters bound together in stable nuclear structures throughout the periodic table. While alpha clusters have been conceived as linear two-dimensional and three-dimensional close-packed, crystal-like structures, theorists have not considered three-dimensional extended structures as exhibited by boson fermion nuclei (BFNs). BFNs are composed of alphas and the nuclei of hydrogen, deuterium, tritium, and helium-3 as building blocks. Previous theoretical and experimental work has shown correspondence with the 6 Li, 7 Li, 10 B, 11 B, and 40 Ca BFN.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2020

Boson Fermion Nuclei And Structures Throughout The Periodic Table Of Elements: Monograph #8

A homologous structural pattern among nuclei that corresponds to the periodicity of the periodic table of elements has been identified. Schematic diagrams of boson fermion nuclei (BFN) are shown for nuclei throughout the periodic table of elements. Transition elements in the fourth, fifth, and sixth periods display bridges between the legs of the tetrahedral nuclear structure, occurring where the nuclear structure is sufficiently massive to create potential wells able to hold the nucleons in a fermion-pocket quantum system bridging the legs. These nuclei are not formed by buildup, as in stepwise nuclear fusion or nucleon capture, but by a process in which the nucleus has “fallen down” in mass during stellar nucleosynthesis from a higher A and Z, shedding nucleons and decaying radioactively to arrive at a lowest-energy-system, stable-boson-fermion nuclear structure.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2021

Boson Fermion Nuclei Stellar Nucleosynthesis: Monograph #7

Stellar nucleosynthesis is generally described as the process by which nuclei are combined through fusion to create larger nuclei by the specific addition of nucleons, leading to a stable nucleus of a higher positive charge (Z) or nucleon number (A), or both. By contrast, the boson fermion nucleus (BFN) attributes the creation of nuclei to highly chaotic processes within a star. Under high pressure and temperature within the star, and given a certain probability of overcoming coulomb barriers, nucleons and first-period nuclear components agglomerate in a manner that rarely results in a stable nuclear structure. On a random basis, proto-nuclei are conveyed out of the star’s central agglomeration zone in an upwelling flow from within the star. As these proto-nuclei evolve to their lowest energy state, they shed nucleons and undergo radioactive decay, emerging as a stable BFN structure.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2020

Boson Fermion Nuclei Monograph Series: Monograph #6

Monographs 1 through 5 show that nuclei in the second and third periods of the periodic table of elements are made of components that are nuclei in the first period. This leads to descriptions of nuclear structures throughout the periodic table that account for many of the observed properties of nuclei and atoms. The boson fermion nucleus is significant in that it offers a unified explanation for many observables and predicts the creation of materials with extraordinary properties.

07 ISOTOPE AND RADIATION SOURCES↗