Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Identification problem”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Flight test design for efficient extraction of aircraft parameters

This paper considers the design of flight control inputs which result in a minimization of the nonuniqueness problem of parameter identification due to statistical correlation. The performance index for the control design is taken as a linear weighted sum of the squares of the correlation coefficients of the aerodynamic stability and control derivatives as computed from the Cramer-Rao lower bound matrix. An optimal input design is demonstrated for an F-8 aircraft with supercritical wing. Reduced correlations are noted and corresponding estimates and confidence levels presented.

Wells, W. R.↗
NASA NTRS1977

Charge coupled devices

The results are presented of a program to design, fabricate, and test CCD arrays suitable for operation in an electron-bombarded mode. These intensified charge coupled devices have potential application to astronomy as photon-counting arrays. The objectives of this program were to deliver arrays of 250 lines of 400 pixels each and some associated electronics. Some arrays were delivered on tube-compatible headers and some were delivered after incorporation in vacuum tubes. Delivery of these devices required considerable improvements to be made in the processing associated with intensified operation. These improvements resulted in a high yield in the thinning process, reproducible results in the accumulation process, elimination of a dark current source in the accumulation process, solution of a number of header related problems, and the identification of a remaining major source of dark current. Two systematic failure modes were identified and protective measures established. The effects of tube processing on the arrays in the delivered ICCDs were determined and are reported along with the characterization data on the arrays.

Walker, J. W.↗
NASA NTRS1982

A method for determining the flight readiness of the integrated Space Shuttle system

The Space Shuttle Dynamic Integrated Test (DIT) system is described. The DIT is an open-loop system which makes no attempt to simulate Shuttle sensors, and by which the Shuttle redundancy management system is left unmodified. Open-loop operation is shown to inherently require less computing capacity during a test than the closed-loop alternative. DIT tests have generated a high degree of confidence in the Shuttle hardware, allowing the identification of such problems as a sluggish main fuel valve, which caused a countdown hold seconds before the simulated T-zero, and Main Engine Controller software malfunctions. Attention is given to the combination and substitution of sensor data, the modification of nominal flight software, and the preparation of simulation data. It is noted that greater performance would have been achieved if the interface with DIT had been a design requirement from the outset of Space Shuttle development.

Bacon, I.↗
NASA NTRS1982

Detection of the 1400 A absorption in the ultraviolet spectrum of the DA white dwarf LB 3303

Low-resolution ultraviolet International Ultraviolet Explorer spectra of the southern white dwarf LB 3303 show the presence of the wavelength 1400 absorption feature reported by Greenstein in the spectrum of 40 Eri B. The equivalent width is 5.7 A, and the measured wavelength is 1394 A. A comparison of the ultraviolet fluxes with model atmospheres confirms that LB 3303 has an effective temperature near 16,000 K, as found earlier from visual wavelength data. There are still problems with the identification of this line. The star is not hot enough to explain the presence of Si IV, and the agreement with the spectrum of the H2 molecule is not convincing.

Wegner, G.↗
NASA NTRS1984

Tribological applications of surface analysis

For some years, surface analysis was used in fundamental studies of solid-solid contacts existing in tribological systems. Analysis was used to detect material transfer in sliding contacts. The effects of surface films on the adhesion of contacts was monitored. Finally electron spectroscopic analysis of interfaces has shed some light on the fundamental electronic nature of the interfacial bond. More recently, surface analysis was applied to many tribological engineering problems. In particular, identification of chemical films formed during the sliding contact of lubricated systems and study of the surface chemistry of lubricant additives were active areas of research. One or more of four properties of the analytical technique will be important in determining its utility. The four are: lateral resolution, specimen damage, depth resolution and the availability of chemical information. In each of the applications discussed here, the important factors are brought out.

Wheeler, D. R.↗
NASA NTRS1984

The monsoon of East Asia and its global associations - A survey

Observations concerning the summer and winter monsoons of East Asia and their global associations are reviewed. The seasonal mean structure, transient variation, (intraseasonal to interannual), and synoptic-to-planetary scale fluctuations are discussed separately for the two monsoon components. Similarities and differences between the East Asian monsoon and that of India are also surveyed. Also presented is a description of the current status of monsoon-related observational and theoretical research. The importance of understanding the long-term anomalies of the monsoon is stressed, and an attempt is made to put the East Asian monsoon in a global perspective with a view towards its identification with the problems of long-range weather forecasting or short-term climate prediction in general. Finally, some future directions of research are suggested.

Lau, K.-M.↗
NASA NTRS1984

Research in applied mathematics, numerical analysis, and computer science

Research conducted at the Institute for Computer Applications in Science and Engineering (ICASE) in applied mathematics, numerical analysis, and computer science is summarized and abstracts of published reports are presented. The major categories of the ICASE research program are: (1) numerical methods, with particular emphasis on the development and analysis of basic numerical algorithms; (2) control and parameter identification; (3) computational problems in engineering and the physical sciences, particularly fluid dynamics, acoustics, and structural analysis; and (4) computer systems and software, especially vector and parallel computers.

Source record↗
NASA NTRS1985

Terrestrial applications from space technology

NASA's Technology Utilization Program, which is concerned with transferring aerospace technologies to the public and private sectors, is described. The strategy for transferring the NASA technologies to engineering projects includes: (1) identification of the problem, (2) selection of an appropriate aerospace technology, (3) development of a partnership with the company, (4) implementation of the project, and (5) commercialization of the product. Three examples revealing the application of aerospace technologies to projects in biomedical engineering, materials, and automation and robotics are presented; the development of a programmable, implantable medication system and a programmable, mask-based optical correlator, and the improvement of heat and erosion resistance in continuous casting are examined.

Clarks, H.↗
NASA NTRS1987

Fault-tolerant computer architecture based on INMOS transputer processor

Redundant processing was used for several years in mission flight systems. In these systems, more than one processor performs the same task at the same time but only one processor is actually in real use. A fault-tolerance computer architecture based on the features provided by INMOS Transputers is presented. The Transputer architecture provides several communication links that allow data and command communication with other Transputers without the use of a bus. Additionally the Transputer allows the use of parallel processing to increase the system speed considerably. The processor architecture consists of three processors working in parallel keeping all the processors at the same operational level but only one processor is in real control of the process. The design allows each Transputer to perform a test to the other two Transputers and report the operating condition of the neighboring processors. A graphic display was developed to facilitate the identification of any problem by the user.

Ortiz, Jorge L.↗
NASA NTRS1988

Recursive inversion of externally defined linear systems

The approximate inversion of an internally unknown linear system, given by its impulse response sequence, by an inverse system having a finite impulse response, is considered. The recursive least squares procedure is shown to have an exact initialization, based on the triangular Toeplitz structure of the matrix involved. The proposed approach also suggests solutions to the problems of system identification and compensation.

Bach, Ralph E., Jr.↗
NASA NTRS1989

Recursive inversion of externally defined linear systems by FIR filters

The approximate inversion of an internally unknown linear system, given by its impulse response sequence, by an inverse system having a finite impulse response, is considered. The recursive least-squares procedure is shown to have an exact initialization, based on the triangular Toeplitz structure of the matrix involved. The proposed approach also suggests solutions to the problem of system identification and compensation.

Bach, Ralph E., Jr.↗
NASA NTRS1989

Boundary estimation problems arising in thermal tomography

Problems on the identification of two-dimensional spatial domains arising in the detection and characterization of structural flaws in materials are considered. For a thermal diffusion system with external boundary input, observations of the temperature on the surface are used in a output least squares approach. Parameter estimation techniques based on the method of mappings are discussed and approximation schemes are developed based on a finite element Galerkin approach. Theoretical convergence results for computational techniques are given and the results are applied to experimental data for the identification of flaws in the thermal testing of materials.

Banks, H. T.↗
NASA NTRS1989

Atmospheric planetary waves induced by solar rotation

It is known that there are variations in the atmospheric processes with a period close to that of the rotation of the Sun (27 days). The variations are discovered in tropospheric processes, rainfalls, geopotential and in stratosphere. The main theoretical problem is the identification of the physical process by which these heterogeneous solar and meteorological phenomena are connected. Ivanovsky and Krivolutsky proposed that the periodic heating of the ozone layer by the short wave radiation would be the reason of excitation the 27-day oscillations. It was also assumed that excitement takes place in condition of resonance with an excited mode corresponding to the conditions present in the stratospheric circulations. The possibility is discussed of the resonant excitation and presentation is made of the data analysis results which support this idea.

Krivolutsky, A. A.↗
NASA NTRS1994

How Captain Amerika uses neural networks to fight crime

Artificial neural network models can make amazing computations. These models are explained along with their application in problems associated with fighting crime. Specific problems addressed are identification of people using face recognition, speaker identification, and fingerprint and handwriting analysis (biometric authentication).

Rogers, Steven K.↗
NASA NTRS1995

Wing-section optimization for supersonic viscous flow

To improve the shape of a supersonic wing, an automated method that also includes higher fidelity to the flow physics is desirable. With this impetus, an aerodynamic optimization methodology incorporating thin-layer Navier-Stokes equations and sensitivity analysis had been previously developed. Prior to embarking upon the wind design task, the present investigation concentrated on testing the feasibility of the methodology, and the identification of adequate problem formulations, by defining two-dimensional, cost-effective test cases. Starting with two distinctly different initial airfoils, two independent shape optimizations resulted in shapes with similar features: slightly cambered, parabolic profiles with sharp leading- and trailing-edges. Secondly, the normal section to the subsonic portion of the leading edge, which had a high normal angle-of-attack, was considered. The optimization resulted in a shape with twist and camber which eliminated the adverse pressure gradient, hence, exploiting the leading-edge thrust. The wing section shapes obtained in all the test cases had the features predicted by previous studies. Therefore, it was concluded that the flowfield analyses and sensitivity coefficients were computed and fed to the present gradient-based optimizer correctly. Also, as a result of the present two-dimensional study, suggestions were made for the problem formulations which should contribute to an effective wing shape optimization.

Item, Cem C.↗
NASA NTRS1995

Practical aspects of variable reduction formulations and reduced basis algorithms in multidisciplinary design optimization

This paper discusses certain connections between nonlinear programming algorithms and the formulation of optimization problems for systems governed by state constraints. The major points of this paper are the detailed calculation of the sensitivities associated with different formulations of optimization problems and the identification of some useful relationships between different formulations. These relationships have practical consequences; if one uses a reduced basis nonlinear programming algorithm, then the implementations for the different formulations need only differ in a single step.

Lewis, Robert Michael↗
NASA NTRS1996

Preparation of Flight Operations and IWS Integration of the CELIAS Experiment on the SOHO Spacecraft

During this annual progress report time period, the following activities took place: (1) Generation of several versions of the CELIAS (STOF/SEM/CTOF/MTOF/DPU) commissioning timeline for the first 180 days after launch. These were written and submitted by A. Galvin after consultation (phone, fax, e-mail, meetings) with the CELIAS Instrument Manager and Lead-Co-I's. (2) Identification of several problems with the CELIAS portion of the Project Data Base (PDB). (3) Meetings with the Flight Operations Team regarding PDB, critical commands, etc. (4) Attend Science Operations Working Group (SOWG) Meetings (November 1994, February 1995, May 1995) and Flight Operations Review Meeting (July 1995). (5) Participate in Flight Operation Simulations SIM 1 (November 14-18, 1994), SIM 2 (May 1-4, 1995) and SIM3 (August 7-11, 1995). (6) Participate in the Ground System Compatibility Test Rehearsal (April 24- 28, 1995), GSCT #2 (May 30-June 14, 1995), GSCT #3 (September 12-22, 1995), and GSCT #4b (October 30-November 5, 1995). A small portion of the documentation for the above cited activities is appended.

Ipavich, Fred↗
NASA NTRS1996

Preparation of Flight Operations and IWS Integration of the CELIAS Experiment on the SOHO Spacecraft

During this reporting time period, the following activities took place: (1) generation of several versions of the CELIAS (STOF/SEM/CTOF/MTOF/DPU) commissioning timeline for the first 180 days after launch; (2) identification of several problems with the CELIAS portion of the Project Data Base (PDB); (3) attendance of the Science Operations Working Group (SOWG) Meetings (November 1994, February 1995, May 1995) and Flight Operations Review Meeting (July 1995); (4) participation in Flight Operation Simulations SIM 1 (November 14-18, 1994), SIM 2 (May 1-4, 1995) and SIM3 (August 7-11, 1995); and (5) participation in the Ground System Compatibility Test Rehearsal (April 24-28) 1995), GSCT #2 (May 30-June 14, 1995), GSCT #3 (September 12-22 1995), and GSCT #4b (October 30-November 5, 1995).

Ipavich, Fred↗